Full Text Searchable PDF User Manual
Designed in Grand Rapids MI, USA Assembled in China
Car Rear View Mirror Monitor with
7.3 Inch Wide LCD Display Screen
User manual
FK-073A
ECE
R
10
Approval No.: 10R-03 12762
ECE
R
46
Approval No.: 46R-04 0019
Welcome to use our Car Rear view mirror monitor with 7.3 inch wide LCD display
screen.
●We reserve the final explanation right on this User's Manual.
●Specifications are subject to change without notice. Sorry for any inconvenience
caused!
●Please make a copy of the important data. We assume no responsibility for the
data loss.
●This manual has been carefully checked. Please contact our service center when
any typing mistake is found.
●Please read the operating instruction carefully and use the accessories only
provided by the original factory to avoid any unexpected damage. No warranty
will be executed if you are not following the instruction or connecting with the
incompatible accessories, we assume no responsibility for any loss and damage
caused hereby.
●Any discrepancy between the pictures with real products hereinafter, the real
one prevails.
●The working voltage of this model is 10V to 30V, and it can be installed in the
truck if its voltage is 24V. Please refer to the camera manual for the camera power
supply, since it's not from the car rear view mirror. The 24V camera is advisable if
installed to truck or purchase the power adapter to convert the voltage.
User's Manual
Chapter one: Product Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Operating panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter two: Installation and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 How to install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Special bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3 How to wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4 How to display the rear view mirror screen . . . . . . . . . . . . . . . . . . . . 8
Chapter three: Adjustable Guideline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1 About guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.2 What is the regular guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.3 How to adjust the guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter f
:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
our
11
Menu Setting
4.1 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2 Menu setting guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter one: Product Introduction
1.3 Specification
The packing box contains the following accessories, please confirm:
Car rear view mirror monitor with 7.3 inch wide LCD display screen
wire harness
User's manual
wire cover
Remote control
For the items listed above, please check with your package box. If any damage,
Please contact with the distributor or the agent as soon as possible.
1.1 Package
●
●
●
●
●
7.3 inch wide LCD display screens
3-way video input
Back up camera display
Automatic brightness adjustment
4.0 mm glass and
21 mm car factory OEM bracket
Adjustable guide line
Mode switch between wide screen and dual screens LCD display separately
1.2 Features
●
●
●
●
φ
●
●
Screen size: 7.3 inch
Display screen: TFT-LCD
Aspect resolution: 1280(H)*390(V)
Working voltage: 12V
Working temperature: -20
℃
~+65
℃
Signal system: PAL/Auto/NSTC
●
●
●
●
●
●
●
1.4 Operating panel
7.3 inch ultra high brightness display screen
1
Turn on/off the display screen
Indicator
1
2
3
4
5
6
7
2
3
4
7
6
5
Front light sensor
Shortcut key to back up camera
Short press any key in the left until the indicator light is on.
Short press “R” to Back Up Camera. But it doesn't work when
it's in reversing mode.
Switch between different video channels
Short press it to make the video channels switch among
DOUBLE, VIDEO1, VIDEO2, BACK UP CAMERA. No guide line
display on the monitor no matter how many times when you
press “CH”. When the reversing line is connected to the 12V, it
would change to BACK UP CAMERA automatically, and guide line
is on the monitor, which can be adjusted by the remote.
Color mode adjustment
Short press it can adjust the color mode of the image. Four
modes are available, that is STANDARD, BRIGHT, BEAUTIFUL,
and SOFT. Please be noted that these modes only are accessible
when it's not in reversing mode.
2
3
8
9
10
11
12
14
15
13
16
17
18
Horn
Special bracket
8
9
10
11
12
13
14
15
16
17
18
19
Red to ACC+
Black to GND
Turn left signal (option)
Turn right signal (option)
Back up signal
Video input
Video input
Camera
Connector
20
Connector cover
19
8
20
Cable cover
2.1 How to install
Remove the original rear view mirror and remain
the metal base on the windscreen
Original car rear view mirror
Along this direction
to install rear view mirror
Along this direction
to install rear view mirror
Along this direction
to install rear view mirror
contrarotate the fixed
rear view mirror
1
We have many kinds of brackets. one of them must suit for your car, and we are
not going to go through anymore examples, because the space is limited.
If you don’t find the same bracket here as your car, please contact us.
2.2 Special bracket
4
5
Chapter two: Installation and Wiring
Different cars have different brackets. It depends on your vehicle maker and
manufacturer.
There are many methods to remove the original rear view mirror, however, please
don’t force the mirror off the bracket.
The manufacturer will not be responsible for any damage caused to your car by
wrong installation of the mirror.
Remove the original mirror
Install mirror monitor on the base
2.3 How to wire
3M
6
7
power
harness
PUSE
BOX
Black to GND
Red to ACC +12V
Black to GND
Red to ACC +12V
Black to GND
Red to ACC +12V
Black to GND
Red to ACC +12V
Back up video
Left video
Right video
Turn right signal(option)
The advisable installation
position for camera
Back up video
R
ig
ht v
id
eo
By connecting the green line, the reversing signal is input to the rear view mirror
and reversing video can automatically display on the wide 7.3 inch LCD monitor.
Turn left signal (option)
Lef
t v
id
eo
CTR1(Green)
it's advisable to connect the reversing line
2.4 How to display the rear view mirror screen.
8
Status B
:Wide screen would display the rear image when it's in parking mode.
Status A:
In normal driving, the car monitor can display left and right video,
to facilitate drivers to observe the condition of the two sides (There will be
different video displayed on mirror according to the different location of
camera ).
Status C
: When the car is turning to left, the left light is on, and
(option)
turning left signal would trigger automatically the left camera to get the full
screen. After it closes for 3S, the screen would get back.
Status D (option)
: When the car is turning to right, the right light is on, and
turning right signal would trigger automatically the right camera to get the
full screen. After it closes for 3S, the screen would get back.
Status E (option)
: When the front two turning lights are on, the signal would
trigger automatically the left and right cameras. After it closes for 3S, the
screen would get back.
9
12
13
Chapter Four: Menu Setting
Enter picture menu
Guide line clockwise
Menu parameter decrease
Menu parameter increase
Guide line up
Guide line left
Enter guide line
adjustment
Guide line anti-clockwise
Guide line right
Guide line down
Press to reset all
menu and parameters
4.1 Remote control
The menu only can be set by remote control, and kindly check its definition as below.
4.2 Menu setting guidance
Short press “MENU”to enter “PICTURE”, then you can switch among
“BRIGHTNESS”, “COLOR”, “CONTRAST”, “SCALE”, “START LOGO”, “PRESET”,
or enter out. When it switches to “PRESET”, re-press shortly the MENU, and
you would close the menu. UP and DOWN are to change the figure of each
setting.
4.2.1 BRIGHTNESS ADJUSTMENT
The defaulted setting is 50, ranging from 0 to 100, and only CVBS signal can work.
4.2.2 COLOR ADJUSTMENT
The defaulted setting is 50, ranging from 0 to 100, and only CVBS signal can work.
4.2.3 CONTRAST ADJUSTMENT
The defaulted setting is 50, ranging from 0 to 100, and only CVBS signal can work.
UP
Clockwise
Down
Right
left
Move the guide line
Rotate the guide line
anticlockwise
Press the button to choose the L or R adjustable guideline
Remote control
R
L
Wrong
position
Right position
10
11
According to the site of standard reference line, we can put reference objects such
as desks in the back area of car. Compared with the marked reference objects, we
can adjust the sites and angle of two guide lines displayed on the monitor. You will
get the accurate and safety guide lines once they coincide with the reference
objects.
Press
setting
button
is
to
enter
into
“
guide
line
adjustment
”
mode
.
The system is
defaulted to adjust left guide line firstly.
Press the button again will switch to adjust
the right guide line. The
up
,
down
left
and
right
buttons
are
to
adjust
the correspondent location
of
guide
lines
.
The
clockwise rotation
and
contra
rotation buttons
are
to
adjust
the
angle
of
guide
lines
.
It
is
easy
to
operate
and
calibrate
.
After finishing calibration, switch the reverse gear to save
the information.
Caution: keep the remote control 0.5m-1.0m from rearview mirror when you use the remote to
adjust the parking lines.
3.3 How to adjust the guide line
Display
on
the
monitor
Generally, to help drivers estimate the distance from obstacles, there are three
lines for reference -red, yellow and green. Those three lines are displayed on the
monitor when car is reversing. The green line is 3m from the back of car and the
yellow line is 2m. The distant red line is 1m from the backside of car while the
closed red line is 0.4m. Both reference lines on the left and right should leave
0.2m space from the car.
20CM
20CM
3.1 About guide line
Regular guide line is fixed. But installation sites of cameras are different as well
as car size. The fixed guide line is not accurate enough for drivers. There will be a
great difference between regular and fixed guide lines and car's real guide lines,
especially when camera is mounted on the left or right side of car backside. It
may cause accidents.
3.2 What the regular guide line is
Chapter three: Adjustable Guideline
4.2.4 SCALE ADJUSTMENT
4.2.6 PRESET ADJUSTMENT
It's only for the model with guide lines, and no such setting for those without
such function. ON is defaulted setting, and you can manually set it to OFF.
4.2.5 START
LOGO ADJUSTMENT
It's defaulted as OFF, and ON is to preset the menu, then it switches to OFF
automatically.
It's is defaulted as “ON”, you can set it to “OFF” manually.
The reversing mode is the top priority, then all touch panel is ineffective. The
video cannot be switched until the parking mode is ended. But the manual
button is accessible. Short press is to adjust the brightness of the monitor, long
press to turn off the screen.
14