PDF User Manual

ENGLISH 

1

Hardware Installation 

1.

Install two AAA batteries in the mouse.   

Pairing Process in Vista and Windows XP SP2 

 
1.

Open the Windows control panel, then 
select “Bluetooth devices”. 

2.

Click 
“Add…..”

3.

Select “My device is setup 
and ready to be found”, then 
click “Next”. 

ENGLISH 

2

4.

Press and hold the “CONNECT” 
button under the mouse. 

 
 
 
 
 
 
 
 
5.

In “Peripherals 
(Keyboards, mice, 
joysticks)”, select Genius 
Bluetooth Mouse and 
click “Next”. 

 
 
 
 
 
 
 
 
6.

Select “Don’t use a 
passkey” and click 
“Next”. 

ENGLISH 

3

7.

Windows will start to connect 
the Genius Bluetooth Mouse 
automatically. Press the finish 
button after the connection 
process is completed. 

 
 
 
 
 
Once the connection between the 
Genius Bluetooth Mouse and your 
computer is established, the 
connection will be kept permanently. 
That means the connection will 
re-establish automatically each time 
you run Windows. 
 
 
 
 
 
 

Pairing Process in Mac OS X 10.2.6 or later 

1.

Press and hold the “CONNECT” button 
under the mouse. 

ENGLISH 

4

2.

Click the Bluetooth icon 
on the task bar and select 
“Setup Bluetooth device”. 

 
 
 
 
 
 
 
 
3.

Click “Continue” when the “Bluetooth Setup Assistant” appears. 

ENGLISH 

5

4.

Choose “Mouse” 
and press 
“Continue” to the 
next step. 

 
 
 
 
 
 
 
 
 
 
5.

When Bluetooth 
finds the “Genius 
Bluetooth Mouse”, 
please press 
“Continue” to the 
next step. 

 
 
 
 
 
6.

Click “Continue” 
when the “Passkey 
exchange with your 
mouse” appears. 

ENGLISH 

6

7.

The connection is now successful and you can use your Genius 
Bluetooth Mouse. 

Now you can use the Genius Bluetooth Mouse wirelessly with a 
Bluetooth enabled Apple computer. Afterwards, the connection of the 
Genius Bluetooth mouse will re-establish automatically each time 
Mac OS X runs. 

Software Installation (for 4D scrolling only) 

1.

Make sure the mouse is connected to the computer. 

2.

Put the CD driver into the CD drive. 

3.

Follow the instructions on the screen to finish the software 
installation. 

Adjust dpi resolution 

Press left and right button together for 
three seconds, the resolution will switch 
from 1600 to 800 dpi. Press both buttons 
again for three seconds and it will revert 
to 1600 dpi. The LED flash is shorter for 
800 dpi.   

ENGLISH 

7

Note: 

1.

Class 1 Laser Product. Passed eye-safety regulation 
(IEC 60825-1) 

2.

Class 2 Laser Product. The last pointer is dangerous to eyes! 
Do not stare into the beam, and be sure to avoid any child 
using the pointer. 

Factory Setting 

 
Use “Switch Button” to switch from 

“Mouse mode”

 and 

“Presenter 

mode”

 for different functions. LED flash will show you which mode 

is now. When LED in “BLUE” is in Mouse mode and LED in “RED” 
is in Presenter mode. 

 
 
 
 
 
 
 
 
 
 
 
In Mouse mode: 

1.

Left Button: 

Provides traditional mouse functions like click, 

double click and drag. 

2.

Right Button: 

Provides traditional mouse click functions. 

3.

Magic-Roller: 

Press the “Magic-Roller” to surf the Internet and 

Windows documents. 

ENGLISH 

8

Horizontal Scroll: 

Press the roller to the left and the cursor 

scrolls to the left; press the roller to the right and the cursor 
scrolls to the right. 

4.

Switch Button: 

To switch from Mode-1(Mouse) or 

Mode-2(Presenter) function.

5.

LED indicator: 

If your battery power is low, the LED will 

brighten. When LED in “BLUE” is in Mouse mode.

In Presenter Mode:

1.

Left Button: 

Next page when you are in PowerPoint. 

2.

Right Button: 

previous page when you are in PowerPoint. 

3.

Magic-Roller: 

Press the “Magic-Roller” to use laser point.

Horizontal Scroll: 

Press the roller to the right is F5 (like keyboard 

function) for play PowerPoint in your presentation. Press the 
roller to the left is ESC.   

4.

Switch Button: 

To switch from Mode-1(Mouse) or 

Mode-2(Presenter) function.

5.

LED indicator: 

If your battery power is low, the LED will 

brighten. When LED in “Red” is in Presenter mode.

ENGLISH 

9

 
Button Function: 

Button  

Mouse mode 

Presenter mode 

1 Left 

Button 

Next 

page 

2 Right 

Button 

Previous 

page 

Magic-Roller Laser 

On/Off 

Scroll right: F5 

3 

Horizontal Scroll 

Scroll left: ESC 

4 

Mode switch 

Mode switch 

5 

LED indicator in blue 

LED indicator in red 

This device complies with Part 15 of the FCC rules, operation is 
subject to the following two conditions. 
（1）This device may not cause harmful interference and, 
（2）This device must accept any interference received,  
     including interference that may cause undesired operation .    
NOTE:  
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE 
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.  SUCH 
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE 
EQUIPMENT