Full Text Searchable PDF User Manual
Service Manual G-Shot P533
Service Manual
G-Shot P533
Version K01A
Version: K01A
1
Service Manual G-Shot P533
Contents
………………………………...…………..2
1.Function Test ………………………………………3
2.Troubleshooting ……………………………………5
3.Disassemble Procedure ……………………………7
4.Firmware Update Procedure ………………….…..8
5.Parts List ……………………………………………9
6. Tools …..……………………………………………14
Version: K01A
2
Service Manual G-Shot P533
1. Function Test
TOOL/EQUIPMENT
SD card*2, TV, AC adapter, lens-wiping paper
USB cable, flower, accessory, computer
OPERATION DESCRIPTION
ITEM OPERATON
DESCRIPTION
1
Power on with 5.0V AC adaptor, rotate the camera up 20 degree, down 60
degree, left and right 40 degree to check the words clearance on LCD,
and waves are not allowed on LCD.
2
Shift mode dial to Auto capture.
3
Adjust the size and quality of images, press wide to Tele mode, capture
towards flower in flash forbidden mode, then using digital zooming, when
in dark place, LCD shouldn’t has serious noise, then check serial capture
mode. Then press delete key to cancel one picture.
4
Press self-timer key, LCD will display self-timer icon and time, choose
different time to check if it is correct then use 2S mode to make self-timer
in force flash mode.
5
Choose up key, adjust the distance of 1 and 3 meters, and check if the
focusing is correct (LCD display blue AF frame)
6
Shift to P mode, LCD left corner will display PROG
7
Shift to TV mode, LCD display TV icon, check if the aperture will change
with different light sources. Hide the lens with hand, press S1 to check
with AF lamp, then press left 5-way key twice, adjust it can change AE
compensation value.
8
Shift to M mode, CD display M icon, choose left key to change aperture
and shutter time, shift aperture to 2.8, press S1, then shift to 6.8, press S1,
to check if the lens aperture is changed.
9
Shift to portrait mode, LCD display PROT.
10
Shift to action mode, LCD display action icon, press Menu, choose
AE/AWB, white balance, press SET to up/down choose, LCD should
display different color regularly.
11
Choose night mode, capture towards dark place, camera should flash on.
12
Choose movie mode, LCD display MOV, choose Menu button, try each
function to check LCD display is ok. Press Shutter button to make movie,
stop after 5 seconds.
13
Choose playback mode, press SET key to start movie playback, the sound
should be normal, press left/right/up key can adjust playback speed,
playback images, LCD appear images shifting. Choose left/right key to
rotate the images, press SET key to check the operation. Choose Display
button, LCD display image inform, the words should be clear. Press Tele
to magnify the image, press S1, LCD display can record. Choose Wide
key, LCD display nine thumb, choose 5-way button can choose images,
choose delete button to cancel single image. Press Menu button, choose
slide show key, LCD will playback images shifting. Choose protect key, to
set protection for pictures, adjust lightness of LCD.
Version: K01A
3
Service Manual G-Shot P533
14
Choose SET UP mode, check SD card space, FW version, check Reset
system, check languages, mode, auto power off time, etc. after all are ok,
format SD card, power off camera, check if the lens draw back, plug out
adapter.
Version: K01A
4
Service Manual G-Shot P533
2. Troubleshooting
Item
NG point
NG Analyzing solution
Power on fail with
battery (adapter OK)
1>. Check if the spring is deformed or
dirty
2>.Check if the soldering of battery
spring is good
Power on fail with
battery and adapter
1>.Check if POWER switch is good ,the
touch between Release soft board and
main board is good
2>.Check if the connection between
power board and main board is good
3>.Check if main board is NG
Power system
lens can't extend after
power on
1>.Check if power board is NG
2>.Check if lens is NG
3>.After change lens, it need to re-adjust
Charging is fail
1>.Check if battery is NG
LCD display "battery
cover open "
1>.Check if battery cover works ok
LCD display not
match with mode dial
icon
1>.Check if mold dial spring is deformed
or dirty
2>.Check Release flex board copper is
clean, no short circuit or broken circuit
LCD display black
/white image (TV is
ok )
1>.Check if the connection between
LCD flex board is good
2>.Check if LCD NG
** BLACK IMAGE ,check backlit and
round circuit
3>.Check if SW NG
Display and
image system
TV&LCD display no
image/noise
1>.Check if lens shutter is open
2>.Check if power board and main board
is connected well
3>.Check if power board is NG, check
carefully for 15V&-7V power
4>.Check if main board is NG,
5>.Check if CCD flex board is broken
Capture fail in force
flash (charging
abnormal )
1>.Check if big capacitor is cold soldering
Triggering
system
Charging is ok, but
without triggering
1>.Check if the strobe mode setting is ok
2>.Check if light tube is broken
Version: K01A
5
Service Manual G-Shot P533
Communicatio
n system
USB no connection
1>.Check the connection between
(CN703) and main board
2>.Check if USB/TV is cold soldering or
NG
Shutter no sound
Speaker spring connection NG or speaker
itself NG
Others
Playback no sound or
sound noise
Microphone is NG
If change any PCB of DSC, the calibration is necessary.
Version: K01A
6
Service Manual
G-Shot P533
3. Disassemble Procedure
Step
Figure
Description
Remark
Tools
1
Finished Product
Examine if there's
any scratch on the
surface.
2
Remove all the screws
on the camera housing
then remove the Front
Cover and Rear Cover.
Do not scratch the
camera surface
while removing
the screws.
Screw driver
3
Remove the screws on
the SW PCB.
Screw driver
4
Disconnect the FPC
from SW PCB.
Tweezers
5
Disconnect the FPC of
LCD from SW PCB.
Tweezers
6
Desolder the joint of
plate.
Iron soldering
7
Disconnect the FPC of
LCD from SW PCB.
Tweezers
Disasse
mble
pr
oc
edur
es
Version: K01A
7
Service Manual G-Shot P533
4. Firmware Update Procedure
Firmware Update Procedure
Product : G-Shot P533
To update this camera firmware, you will need to have
1. The new firmware file.
2. One SD card.
3. One card reader.
Please follow the steps below to perform the update process:
1. Prepare a formatted and empty SD card.
2. Insert a SD card to the card reader. Copy the firmware file (file name should be
"dcj01.bin") into the SD card. Make sure the new firmware file is copied to the
SD card.
3. Insert the SD card into the camera.
4. Plug in the AC adapter into the camera.
5. PRESS "UP" & "Power" button at the same time then wait for update process
6. When led is green blink, it mean update ok.
7. Reformat the SD card if you want to use it again.
Note:
Don’t remove the power source during firmware update procedures.
.
Version: K01A
8
Service Manual G-Shot P533
5. Part List (G-Shot P533)
Item
Parts Name
Part Number
Quantity
1 Front
Cover
ASSY
9F044-2001-99
1
2 Rear
Cover
ASSY
9F044-4000-99
1
3 SW1
PCB
9A347-3100
1
4 Battery
Cover
ASSY
9F044-7000-99
1
5
LCD
02037-E4H 1
6
Screw
01635-015 7
7
Screw
01635-B42 2
8
Screw
01635-B95 1
9
Screw
01635-244 5
1.
Front Cover Assy
Version: K01A
9
Service Manual G-Shot P533
2.
Rear Cover Assy
Version: K01A
10
Service Manual G-Shot P533
3.
SW PCB
Version: K01A
11
Service Manual G-Shot P533
4.
Battery Cover
Version: K01A
12
Service Manual G-Shot P533
5. LCD
Version: K01A
13
Service Manual G-Shot P533
6. Tooling
Item Description
Mark
1
Screw Driver (2.0m/m)
2 Tweezers
3 Soldering
iron
1. Screw Driver
Version: K01A
14
Service Manual G-Shot P533
2. Tweezers
Version: K01A
15
Service Manual G-Shot P533
Version: K01A
16
3. Soldering iron