PDF User Manual

Service Manual 

G-Shot 210 

Version K01A

Service Manual                                                            G-Shot P210    

Contents 

………………………………...…………..2

1.Function Test ………………………………………3 

2.Troubleshooting ……………………………………5  

3.Disassemble Procedure ……………………………6 

4.Firmware Update Procedure ………………….…..8 

5.Parts List ……………………………………………9  

6.Tooling …………………………..…………………13 

Version: K01A   

2

Service Manual                                                            G-Shot P210    

1. Function Test 

TOOL/EQUIPMENT  

SD card, TV, AC adapter, flower, accessory, computer 

OPERATION DESCRIPTION 

ITEM OPERATON 

DESCRIPTION 

1 

Plug in AC Adapter then Power on, Insert SD card and set to Red-eye 
mode, shooting a picture in the dark and confirm the flashing twice. 
   
 
 
 
 
 
 
 
 

2 

Set to Forced flash mode, take the pictures without flash leakage and no 
flash in the bright and far place. 
 
 
 
 
 
 
 
 
 
 

3 

Set to Off flash and switch to Macro mode, shooting the picture in the 
dark and near place. 
 

4 

Press manual button to select IMAGE SIZE: 1600*1200 or 800*600. 
Selecting QUALITY:NORMAL

→

FINE

→

SUPER FINE and they will 

indicate the image size, quality and quantity of picture at the TFT-LCD 
on the same time. 
 
 

Version: K01A   

3

Service Manual                                                            G-Shot P210    

5 

Press MODE button to set to movie mode to check the movie function. 

6 

Set to Video mode to select NTSC/PAL mode. The image should be 
normally and without a little bit dark, noise or incomplete. 
 
 
 
 
 
 
 
 
 
 
 

7 

Select Erase mode at the Play Menu to erase one then erase all pictures 
that don’t permit can’t erase image situation. 
     
 
 
 
 
 
 
 
 
 
 
 

8 

Turn off power and unplug the AC adapter. 

Version: K01A   

4

Service Manual                                                            G-Shot P210    

Version: K01A   

5

2. Troubleshooting 

Item 

NG point 

NG Analyzing solution 

1 

Power on failure (Big current)  Changing the Power Board. 

2 

Power on failure (Current no 
respond) 

Changing the Power Board. 

3 

Big capacitor no charge 

Changing the Power Board. 

4 

No trigger   

Changing the Power Board. 

5 

It appears color string on the 
TFT-LCD after power on.   
 

Changing the Power Board. 

6 

The LED of Red-eye is 
constantly light. 

Changing the Power Board. 

7 

It has a report in triggering.      Changing the Power Board. 

8 

It’s only triggering once on 
Red-eye mode.   

Changing the Power Board. 

9 

Triggering while turning on the 
power. 

Changing the Power Board. 

10 

Power On automatically. 

Changing the Power Board. 

11 

Power Off automatically. 

Changing the Power Board. 

12 

Charging current is too big. 
(Over 2A) 

Changing the Power Board. 

13 

Power on failure 

Changing the MCU Board. 

14 

TFT-LCD is white screen. 

Changing the Power Board. 

15 

LCD/TV noise   

Changing the MCU Board. 

16 

Current drain is too big. 

Changing the Power Board. 

17 

TFT-LCD no back lit 

Changing the Power Board. 

18 

TV is black and white screen 

Changing the MCU Board. 

19 

USB connection NG 

Changing the MCU Board. 

20 

Power on failure with 
connecting the USB cable. 

Changing the MCU Board. 

If change any PCB of DSC, the calibration is necessary.       

Service Manual                                                            G-Shot P210 

4. Firmware Update Procedure 

Product : G-Shot P210   

To update this camera firmware, you will need to have 

1. 

The new firmware file from Premier.   

2. 

One SD card.   

3. 

One card reader. 

4. 

One AC Adapter only for the camera.

Please follow the steps below to perform the update process: 

1. 

Rename the Boot file name to Code.bin. 

2. 

Prepare a formatted and empty SD card. 

3. 

Insert a SD card to the card reader. Copy the firmware file (Code.bin) into the SD 

card root. 

4. 

Make sure the new firmware file is copied to the SD card. 

5. 

Insert the SD card into the camera, and then plug in the AC adapter (3.3V/2.6A) 

into the camera.   

6. 

Turn on the camera power. 

7. 

Wait until 10 beeps finish then start to firmware update.   

8. 

At this time the LED (RED) blinking until it go out, the firmware update 

procedure is completed.     

9. 

Remove the AC adapter and reformat the SD card if you want to use it again.

10. 

Check new firmware version from SETUP menu-> FACTORY SET.

Note:

 Don’t remove the power source during firmware update procedures.   

Version: K01A   

8

Service Manual                                                            G-Shot P210 

5. Part List (G-Shot P210) 

G-Shot P210_BODY ASM: 25201255100 

Item 

Part Name 

  Part Number 

1 

Front Cover 

15100016101 

2 

Rear Cover   

15120011101 

3 

Top Cover 

15100017101 

4 

MCU Board   

20200012101 

5 

Switch Board 

20200013101 

6 

Power Board 

20200014101 

7 

ASM,G-Shot P210,Dummy 

25200009101 

1. Front Cover   

Version: K01A   

9

Service Manual                                                            G-Shot P210 

2. Rear Cover   

3. Top Cover   

Version: K01A   

10

Service Manual                                                            G-Shot P210 

4. MCU Board   

5. Switch Board   

Version: K01A   

11

Service Manual                                                            G-Shot P210 

6. Power Board   

Version: K01A   

12

Service Manual                                                            G-Shot P210 

6. Tooling   

Item Description 

Mark 

1 

Screw Driver (2.0m/m) 

2 Soldering 

iron 

1. Screw Driver   

Version: K01A   

13

Service Manual                                                            G-Shot P210 

Version: K01A   

14

2. Soldering iron