PDF User Manual

  1. Home
  2. Manuals
  3. Genius BT-02N User Manual

Genius BT-02N User Manual

Made by: Genius
Type: User Manual
Category: Headsets
Pages: 11
Size: 1.27 MB


Download PDF User Manual

Full Text Searchable PDF User Manual

background image







BT-02N User’s manual 



background image







1. Overview…………………………………………….…………..4 

2. Getting started………………………………………………….6 

3.  How to connect your Bluetooth Headset…………………..6 

4.  Using your Bluetooth headset…………………………..…10 

5. Technical specification……………………………………10 




background image






Safety Information 

Federal Communications Commission (FCC) Statement 

You are cautioned that changes or modifications not expressly approved by the part responsible 
for compliance could void the user’s authority to operate the equipment. 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 


-Reorient or relocate the receiving antenna. 
-Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which the receiver is 


-Consult the dealer or an experienced radio/TV technician for help. 


Operation is subject to the following two conditions: 

1) this device may not cause interference and 

2) this device must accept any interference, including interference that may cause undesired 

operation of the device. 


FCC RF Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 

environment. End users must follow the specific operating instructions for satisfying RF exposure 

compliance. This transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter.   


: Users are not permitted to make changes or modify the device in any way. Changes or 

modifications not expressly approved by the party responsible for compliance could void the 
user’s authority to operate the equipment. 


background image






1. Overview 

1-1 Packing Contents: 

  Bluetooth Stereo Headset 

 Power adapter 

  Bluetooth USB dongle (Optional) 

 Software CD  

 Leather bag  


1-2 Headset Feature 

This Bluetooth headset supports Hand-free, Headset, A2DP, AVRCP profile. Accessing functions depends upon 

your profile connection with Bluetooth devices (etc. as mobile phone, Bluetooth USB dongle) support. 

1-3 Key function 






background image











Power On/Off Switch


To power On/Off the Headset. The Power LED will light 

blue when power is switched on 


Multi-Function Button 



To enable the standby mode, pairing with other 

Bluetooth devices, play/pause music, and answer/end 

phone call. 



To stop music when listening 



Volume up/Skip Forward 

Volume up and Skip forward to the next music track. 

Press and hold the button 3 seconds to skip forward to 

next music track. 



Volume down/Skip Reverse

Volume down and to Skip reverse to previous music 

track. Hold the button 3 seconds to skip reverse to the 

previous music track. 



Used for Hand-free and Headset. The microphone can 

be pulled out for better voice clarity. 


Power Charger 

AC adaptor to charge the Bluetooth headset 




Blue Light: The LED will light blue when power is switched on. 

Red Light: The LED will light red when battery is charging. 

Green Light: The LED will light when battery is fully charged. 


Power LED



Green Light with flash Red Light: Battery is out of order, have to replace new battery 


: Press and hold the MFB 5 seconds then headset will be on Pairing mode and the Mode LED 

will flash Red light. 


: Short click the MFB to switch between Play and Pause music, when headset is 

connected on A2DP profile. 

Enable the Standby mode

: Press and hold the MFB 3 seconds. When this headset is on 

Standby mode, there is one “Do Do” tone and the Mode LED will flash blue continuously   

Answer/End phone call function

: Short click the MFB to answer/end phone when headset is on 

Hand free profile. 


Mode LED



Low battery

: Indicates the battery of headset is low and has “Do Do” tone per 10 seconds, have 

to charge the battery.   





background image





2. Getting Start


2-1 Charge Your Headset:   

Before using this product, charge the built-in rechargeable battery. The first time the built-in rechargeable battery 

has to be charged is for at least 5 hours. It will take around 4 hours to fully recharge this product the next time. The 

Power LED will be green when battery is fully charged. When charging, the power LED will be red 


- Turn off the product before charging. 

- It’s normal that a rechargeable battery gradually wears down and requires longer charging times.   

2-2 Turn on Your Headset: 

Switch the Power On and the Power LED will be blue. Press and hold the MFB for 3 seconds to let headset enter 

Standby mode. 


2-3 Pairing: 


You have to pair this headset with a PC, mobile phone, and other Bluetooth devices before using this 

headset. Since “Pairing” creates a link between devices by Bluetooth wireless technology. 

1.  Press and hold the MFB around 5 seconds until the Mode LED changes from red to blue. This headset is 

now in pairing mode. 

2.  Perform a device search for Bluetooth devices (mobile phone, PC USB dongle, Bluetooth audio devices, 


3.  When the search is complete, the Bluetooth device will display the devices found. 

4.  Select “BT-02N” from the device list and confirm the following screen prompts. 

5.  When the screen prompt asks for a password, enter the default password “1234” to finish pairing. After the 

pairing is successful, the Mode LED changes from red to a flashing blue light. 


3. How to connect your Bluetooth Headset 

3-1 Connect with your PC/NB : 

The Bluetooth headset supports A2DP/AVRCP protocol. The headset can control Windows media player volume, 

track, and stop/pause functions. If your PC/NB does not have a Bluetooth device embedded, insert the Bluetooth 

USB dongle and bundled software so you can connect your Bluetooth headset with your PC/NB. 










background image






1.  Put the bundled CD into your CD-ROM. The PC will auto run the Genius screen as below:   


Click on “IVT Software”, and Windows will auto install the IVT Software. (The bundled IVT software version 

is Ver2.1.2.0. If the PC did not run the auto screen, find the E:/IVT software/Setup.exe, click the file, and the 

PC will start to install the software.   

2.  After the IVT software install is complete, the Bluetooth icon will show up on a corner of the screen.   




Double click on the icon, and the IVT software will pop-up on the screen.   


3.  Make your BT-02N at pair mode, then press the orange button 

  in the middle. The Software will start to 

search all Bluetooth devices in the effective distance. 


background image






4.  When the searching is complete, click the BT-02N headset on the screen, and the top icon 


“AV profile” and “Headset” profile will light up.   


5.  Press BT-02N, click the right mouse button, and choose “pair” to pair with your PC. The PC will ask to 

provide the passkey, input “ 


” to complete the pairing.   


6.  Once you complete the pairing, that means your Bluetooth headset is already connected to your PC. There 

will be a red mark near by the headset icon.   


background image





7.  If you want to use the AV profile, press 

, and the PC will connect with your Bluetooth headset by the 

AV profile. Then all processes are complete. The sound output device will change to Bluetooth. Now listen 

the music from the PC will go through the Bluetooth headset.   


8.  If you want to disconnect the connection, right click the 

, and select disconnect. The headset will be 

disconnected from the PC.   


3-2 Connect with Mobile phone   

Some mobile phones have Bluetooth functions. The BT-02N can connect with a mobile phone and a PC at the same 

time. When you listen the music from a PC, and if you have an incoming phone call, BT-02N will pause the music 

and answer the incoming phone call. After the phone call is finished, the music will begin playing again. 



1.  Enable your mobile phone’s Bluetooth function.   

2.  Turn your BT-02N to pairing mode.   

3.  Make your mobile phone search for new Bluetooth device.   

4.  After your phone finds “BT-02N” , start to connect it.   


background image






5.  The mobile phone will turn to hand-free mode when your BT headset is connected. 

Note: This step will be different according to different mobile phones. The connection will depend on your mobile 

phone. For more mobile phone connection information, refer to your mobile phone’s user guide. 

4. Using your Bluetooth headset


4-1 Control your WMP   

After connecting with your PC, you can open the WMP (Windows Media Player) to listen to music. As BT-02N 

supports the AVRCP profile, you can remote control WMP with the headset.   






Multi-Function Button (MFB)


Play/pause the music 



Stop music 


Volume up/Skip Forward 

Volume up and Skip forward to the next music track. 

Press the key once to turn the volume up. Press and 

hold the button 3 seconds to skip forward to next track.


Volume down/Skip Reverse

Volume down and Skip reverse to previous track. 

Press the key once to lower the volume. Press and 

hold the button 3 seconds to skip reverse to the 

previous track. 

4-2 Control your Mobile phone 

When you connect with a mobile phone, if your mobile phone supports A2DP profile, you can listen to music from 

your mobile phone. If not, it will only be in mono, not stereo. 






Multi-Function Button (MFB)


Press once to answer the phone call/hang up the 

phone call 



Reject the incoming phone call 



Volume up/Skip Forward 

Volume up   


Volume down/Skip Reverse

Volume down   


5. Specifications:   


This Bluetooth Headset is compatible with the cellular phones or other Bluetooth enabled devices that support 
Bluetooth Headset, Hand free, AVRCP and A2DP profiles. 

Working Range: 

This Bluetooth Headset conforms to Bluetooth class 2 for a range of 30 feet (10M) in an open space. 


Power Supply: Li Polymer Recharge Battery (380mA/H 3.6V), one-year guarantee. 

Working Time: 8 Hours 

Charge Time: 4 Hours 


background image






Charge Current: 


Stand-By: Approx 250 Hours 





36mm * 6mm (H) 

Loading Impedance: 32


Out Sound Pressure Lever: 100dB±4dB 

Frequency Response: 200 ~ 16K Hz 



Sensitivity: -42dB ± 3dB 

Output Impendence: 



Directivity: Omni-directional 

Frequency Rang: 100 ~ 10K Hz