Genie DSF120PX User Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

USER MANUAL

CCTV House, City Park,Watchmead,Welwyn Garden City,Hertfordshire,AL7 1LT

Tel +44(0)1707 330541 Fax +44(0)1707 330543

GENIE CCTV LTD.

DSF120PX

www.geniecctv.com

111010-1

Wide Dynamic Slim Dome

Camera

Dear Customer

INFORMATION

By selecting this product, you have chosen to use a professional camera that guarantees high quality
and reliability. We would like to thank you very much for your confidence and request that you read
the following instructions carefully before installation and operation. You can then take full advantage
of all the advanced features of this product.

CAUTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE THE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

The lighting flash with an arrowhead symbol, within an equilateral triangle is intended
to alert the user to the presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.

WARNING

Changes or modifications not expressly approved by the manufacturer could void the user’s authority
to operate the equipment.

CAUTION –

To prevent electric shock and the risk of fire hazards

Do NOT use a power source other than that specified.

This installation should be made by a qualified service person and should conform to

all local codes.

Table of Contents

1. Precautions ----------------------------------------------------------------- 4

2. Limitation of liability ------------------------------------------------------- 5

3. Disclaimer of warranty --------------------------------------------------- 5

4. Package ---------------------------------------------------------------------- 6

5. Installation ------------------------------------------------------------- 7~10

6. Name and function of each part---------------------------------------- 11

7. State-of-the-art image enhance technologies--------------------11~12

8. Other features ------------------------------------------------------------12

9. OSD Key ------------------------------------------------------------------ 13

10. How to operate key functions-----------------------------------14~21

11. Trouble shooting guide ------------------------------------------------22

12. Dimension --------------------------------------------------------------- 22

13. Specification ------------------------------------------------------------- 23

· Please read the manual carefully before the installation in order to make use the

camera to be set up correctly and to have the best picture quality.

· Please keep the manual in good condition for your future reference and service

application.

· Installation and services should only be carried out by an authorized personnel

according to local safety regulations.

· If any liquid or solid matter gets into the housing, immediately disconnect the camera

from power supply and have it checked by your authorized dealer before reusing.

· Avoid installing the camera at extremely hot or cold places.

· If you are not a certified person, never try to dismantle the camera. To avoid electric

shock, never remove the screws or covers. There are no parts inside that need

maintenance by the user. All maintenance should be carried by qualified personnel.

· Avoid installing the camera at a place of high humidity.

· Avoid installing the camera at the place exposed to gas or oil.

· Keep the top glass of the lens always clean in order to obtain the best picture quality

all the time. Be careful not to be stained by fingerprint.

· Please give a special attention to keep the unit from dangerous drop or

external shock during the process of transportation or handling.

· Never try to touch the camera in wet hand. It may cause an electric shock.

· Do not expose the camera to radioactivity. It causes a serious damage on the sensor.

This publication is provided “AS IS” without warranty of any kind, either express or

implied, including but not limited to, the implied warranties of merchantability, fitness

for any particular purpose, or noninfringement of the third party's right. This publication

could include technical inaccuracies or typographical errors. Changes are added to the

information herein, at any time, for the improvements of this publication and/or the

corresponding product(s).

1. Precautions

2. Limitation of liability

In no event shall seller be liable to any party or any person, except for replacement or

reasonable maintenance of the product, for the cases, including but not limited to

below :

(1) Any damage and loss, including without limitation, direct or indirect, special,

consequential or exemplary, arising out of or relating to the product;

(2) Personal injury or any damage caused by inappropriate use or negligent operation

of the user;

(3) unauthorized disassemble, repair or modification of the product by the user;

(4) Inconvenience or any loss arising when images are not displayed, due to any reason

or cause including any failure or problem of the product;

(5) Any problem, consequential inconvenience, or loss or damage, arising out of the

system combined by the devices of third party.

(6) Any claim or action for damages, brought by any person or organization being

photogenic subject, due to violation of privacy with the result of that surveillance-

camera's picture, including saved data, for some reason, becomes public or is used

for the purpose other than surveillance.

3. Disclaimer of warranty

Wide Dynamic

Slim Dome Camera 1EA

Instruction manual

1EA

Extra Video output cable

1EA

Tapping screws

4EA

Fixed Screws

4EA

Plastic anchor

4EA

Adaptor plate

1EA

Drilling template

1EA

[Option]

USER MANUAL

DSF120PX

Wide Dynamic Slim Dome

Camera

5-1. Opening the dome

5-2. Removing the dome

ྙ

Push the Push Button forward on the Dome Cover.

(Take off a transparent vinyl on dome curvature when installation)

ྙ

Pushing the Button forward, unfastens the lock.

In order to unfasten the forward lock with the Push Button, grasp the dome bubble

and take this off, and the cover, by pulling out backward and upward.

4. Package

5. Installation

5-5. Installation overview

5-4. Tool-free 3-Axis mounting mechanism

ྙ

Open dome bubble and cover as 5-1 & 5-2.

ྚ

Unfasten Tilt Locking Lever by turning counter clockwise and adjust Camera to

wanted location. And then, fasten Tilt Locking Lever tightly by turning clockwise.

ྛ

Adjust focus using Tele-Wide & Near-Far Knob.

ྜ

Zoom

8QORFNWKH]RRPOHYHUE\WXUQLQJFRXQWHUFORFNZLVH

0RYHWKHOHYHUWRDGMXVWWKH]RRP

/RFNWKHOHYHUE\WXUQLQJFORFNZLVH

ྜྷ

Focus

8QORFNWKHIRFXVOHYHUE\WXUQLQJFRXQWHUFORFNZLVH

0RYHWKHOHYHUWRDGMXVWWKHIRFXV

/RFNWKHOHYHUE\WXUQLQJFORFNZLVH

Perfect Tri-axis

Panning axis up to 360° degree

Tilting axis up to 90° degree

Rotation axis up to 180° degree

a. Panning 360°

Pan Camera Set by turning post which is a camera set

holder.

b. Tilting 90°

Tilt Camera Set by turning Tilt Locking Lever.

c. Rotation 180°

Rotate Camera set by grasping and turning the serration in the front of the camera.

ྙ

Drill holes on the ceiling after doing paste a drilling template to wanted spot.

ྚ

Put Fixed Screws supplied in the screw hole on the Dome Base and penetrate

drilling holes on the Ceiling Tile. And then, assemble them to the holes on the

Adaptor Plate.

ྛ

After fixing the location of the Camera, push the Dome Ass’y

(Dome Bubble and Cover) to the Dome Base.

Zoom Knob

Focus Knob

3DQÜ

5RWDWLRQÜ

7LOWÜ

(1) Ceiling mount

Camera

Drilling template

Ceiling Tile

Adaptor plate

Video

Power

Dome-Ass'y

Fixed Screw

3+060[3[/($

5-3. Varifocal Lens adjustment

ྙ

Drill holes on the wall after pasting a drilling template to the desired position.

ྚ

Fix Plastic Anchors in the holes.

ྛ

Fix the Dome Base to the wall using self-tapping Screws supplied.

ྜ

After fixing the location of the Camera push the Dome Ass’y

(Dome Bubble and Cover) to the Dome Base.

Drilling template

Camera Set

Dome-Ass'y

Tapping Screw

Ø4*20L-3EA

Plastic Anchor

Ø6*30L-3EA

Video

Power

RS485

7. State-of-the-art image enhance technologies

7-1. Powerful Wide Dynamic range

Conventional CCD cameras are unable to

process images with simultaneously bright

and dark areas, even with BLC. However,

this unit utilises a Pixim WDR digital imaging

device and can do this, as in the above

picture. It’s suitable for bright, bright

reflecting areas & locations with lots of

windows, such as Banks, Airports etc.

When conventional CCD cameras face

directly toward strong light there are smear

and blooming effects on the picture.

However, this unit with its Pixim WDR

digital imaging device provides clear subject

recognition without such artifacts.

NORMAL CCD TYPE

Pixim WDR

NORMAL CCD TYPE

Pixim WDR

6. Name and function of each part

5. Installation

(2) Wall or Slope mount

7. State-of-the-art image enhance technologies

8. Other features

9. OSD Key

9-1. Setting up the Menu

DOWN

MENU
(PUSH)

RIGHT

POWER INPUT(AC/DC)

VIDEO OUTPUT (BNC)

TRX+(RED CABLE)
TRX- (BLACK CABLE)

LEFT

9-2. Cable Connection

:LGHUDQJHRI$XWRPDWLF:KLWH%DODQFHÜ.aÜ.

Using the latest Pixim WDR sensor, this unit

provides the highest light sensitivity of 0.03

Lux/F1.4 (DSS On). In addition, the built-in

Day/Night function completely removes the

colour signal noises for an ultra clear night

time image quality.

Pixim WDR

Conventional

Pixim WDR

False White Balance

Automatic White Balance of this unit provides

an extensive range of colour temperature

FRQWUROWKDWFRYHUVIURPÜ.WR

Ü.JHQHUDWLQJDQDWXUDO

colour image

without being red or blue in varying light

conditions.

The DSS function means the camera can

display bright images even in extreme

darkness.

Important Tips : Sensitivity can be much more improved when <DSS> is set

2x ~ 32 x.

Caution : When DSS is adjusted to more than 8 times(8x), the picture becomes

brighter but the frame rate becomes slower resulting in the picture being

displayed in slow motion.

Users can use the camera identification (Camera ID) to assign a name of the camera.

The camera ID consists of up to 11 characters.

7-4. Sens-up

2 x

16 x

32 x

When the unit is observing a wide area, the

captured image can be masked for privacy purposes.

Users can easily configure the size and position of

the required privacy zones.

8-2. Privacy zone masking

The unit builds in highly efficient switching power control that self configures 12VDC

or 24VAC input and 24VAC line pulse automatically (Automatic line-lock). Double

insulated power design guarantees no ground loop when used with multiple cameras

and system equipment together through one power source.

'XDOVZLWFKLQJSRZHUZ$XWR/LQHORFN

7-2. Maximum sensitivity with the best sensor and the latest techology

8-1. Camera ID setting

10-1. Menu

10-2. Settings

SETUP menu

PRESETS

EXPOSURE

WDR

WHITE BALANCE

DAY/NIGHT

IMAGE ADJ

SPECIAL

EXIT MENU

ื

LENS

ื

NORMAL

ื

INDOOR

ื

OUTDOOR

ื

FOCUS

ื

EXPOSURE MODE

ื

DNR

ื

AGC

ื

HIGHLIGHT

ื

COLOR ROLL

ื

SENS-UP

ื

MIDDLE

ื

HIGH

ื

USER

ื

LOW

ื

ATW

ื

MANUAL

ื

OUTDOOR

ื

INDOOR

ื

AUTO

ื

COLOR

ื

AWB

ื

FREEZE

ื

CAMERA ID

ื

GAMMA

ื

SHARPNESS

ื

FLIP

ื

COLOR GAIN

ื

PRIVACY SETUP

ื

RESET

ื

DZOOM

ื

SYNC

ื

RETURN

ื

VIDEO OUT

ื

MOTION

ื

RS485 SETUP

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

1. Press the SET button

ㆍ

Settings can now be made. The SETUP menu is

displayed on the monitor.

2. Select a menu item from the list available by using the

UP and DOWN buttons.

ื

Funtions are selected using up and down buttons.

ื

The selected position is displayed in blue.

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

Select the function using
the UP or DOWN button.

Change the status using
the LEFT or RIGHT button.

Note

3. Set up a selected item by using the Left and Right buttons.

4. To finish and save the settings, select 'EXIT MENU' and press the SET button.

An item with the .. icon also has sub-menus. To select a sub-menu,

press the SET button.

PRESETS

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

1250$/1RUPDOHQYLURQPHQW

,1'225,QGRRUHQYLURQPHQW

287'2252XWGRRUHQYLURQPHQW

10. How to operate key functions

EXPOSURE

̰G

WDR

̰G

WHITE BALANCE

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT

NORMAL

MIDDLE
ATW
AUTO..

When the SETUP menu screen is displayed,

select‘EXPOSURE’by using the Up and Down buttons so

that the arrow indicates‘EXPOSURE’.

LENS MENU

DC GAIN

AI THRESH

PREVIOUS PAGE.

120

255

-14

-48

EXPOSURE

LENS
FOCUS..
EXPOSURE MODE
AGC
DNR
HIGHLIGHT
COLOR ROLL
SENS-UP
PREVIOUS PAGE.

DC..

50i
MIDDLE
MIDDLE
ON
OFF
2X

WDR

: When the image has

simultaneous bright and

dark areas, the Wide

Dynamic Range makes

both areas distinct.

EXPOSURE MODE

: To select the number of fields and

number of exposure cycles.

AGC (AUTO GAIN CONTROL)

In dark environments, the higher the gain level,

the brighter the screen but the higher the noise.

LENS

: To adjust the DC and VIDEO lens focus.

DNR (Digital Noise Reduction)

The level of background noise in low light decreases

automatically as the level of gain changes.

HIGHLIGHT

: To optimise the scene when high dynamic range lighting is detected.

COLOR ROLL

: To control a detector that finds colour fluorescent roll.

FOCUS DETECTOR

FOCUS METER

SET FOCUS REGION..

PREVIOUS PAGE.

SET FOCUS REGION

OFF / LOW / MIDDLE / HIGH selectable

DC / Manual : Select Lens Type

50i /25p selectable

LOW / MIDDLE / HIGH / USER selectable

OFF / LOW / MIDDLE / HIGH selectable

SENS-UP

: When it is night or dark, the camera automatically detects the light

level and maintains a clear picture if this mode is activated.

2X, 4X, 8X, 16X, 32X

OFF : Deactivates the SENS-UP function.

ON : bright parts of the image are most visible.

OFF : dark parts of the image are most visible.

WDR LEVEL

BIAS

LIMIT

PREVIOUS PAGE.

-30

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

Use the White Balance function to adjust the screen colours.

1. Position the cursor to point to WHITE BAL on the SETUP menu screen,

select using the Up and Down buttons.

2. Select the desired mode using the Left and Right buttons.

MANUAL WHITE BALANCE

RED

BLUE

PREVIOUS PAGE.

-18

-20

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..

NORMAL

MIDDLE
ATW
AUTO..

AWB : To obtain the optimum state under the current

luminance levels, direct the camera to point toward

a sheet of white paper and press the SET button.

If the environment changes, including the light

source, the white balance will requirere-adjustment.

୔

Select one of the following 5 modes, as appropriate.

ATW : The ATW mode continuously monitors.

INDOOR : Select when the colour temperature is between

Ü.DQGÜ.

OUTDOOR : Select when the colour temperature is

EHWZHHQÜ.DQGÜ.

MANUAL : Select to "fine-tune" the White Balance manually.

Set White Balance first using the

ATW or AWB mode. Afterwards switch to

MANUAL mode, fine-tune the White Balance

and then press the SET button.

Note

8QGHUWKHIROORZLQJFRQGLWLRQV:KLWH%DODQFHPD\QRWZRUNSURSHUO\

In such cases, select the AWC mode.

①

When the colour temperature of the subject environment has a very

high temperature range (e.g. clear sky, or sunset)

②

When the ambient illumination of the subject is low.

③

If the camera is directed toward a fluorescent light, or is installed in

a place where illumination changes dramatically, the White Balance

operation may become unstable.

10. How to operate key functions

DAY/NIGHT

IMAGE ADJ

̰G

SPECIAL

AUTO : This camera has an IR Cut-Filter and

automatically changes to the appropriate

mode according to lighting levels.To set up

the switching time for the AUTO mode

press the SET button.

COLOR : The picture is displayed in colour.

B/W : The picture is always displayed in black and white.

CAMERA ID :

User can enter a unique name for the

respective camera.

The maximum length of the ID is ten

characters.

VIDEO OUT :

Move the cursor to select the video

system

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

When the SETUP menu screen is displayed, select 'IMAGE ADJ' using

the Up and Down buttons.

When the SETUP menu screen is displayed, select 'SPECIAL' by using the Up and Down

buttons so that the arrow indicates 'SPECIAL'.

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

IMAGE

FREEZE
FLIP
SHARPNESS

COLOR GAIN

GAMMA
PREVIOUS PAGE..

OFF
OFF

-8

100

FREEZE

: View still pictures.

FLIP

: OFF / HORIZ / VERT

/ BOTH selectable

BOTH

VERT

HORIZ

OFF

SHARPNESS

: The outline of the video image

becomes cleaner and more

distinctive as the level of

SHARPNESS increases. If the

level gose up excessively,

however, it may affect the

video image and generate

noise.

COLOR GAIN

: To control the colour level in the video.

The available range of level is -8 ~ 8

GAMMA

: Users can change the gamma setting between 25 and 100

The available range of level is -8 ~ 8

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

SPECIAL

CAMERA ID
VIDEO OUT..
DZOOM
MOTION
PRIVACY SETUP..
SYNC
RS485 SETUP..
RESET
RETURN

OFF

OFF
OFF

INT

<RXFDQFKRRVHWKH21DQG2))ZLWKWKHVHOHFWRU

If you select ON, the entered camera ID is displayed

at the selected position in the video picture

(normal operation).

OFF / ON selectable

3OHDVHVHOHFWWKHVHWXSEXWWRQZKLOHLQ2QPRGH

6HOHFWWKHGHVLUHGSRVLWLRQZLWKWKHVHOHFWRU

VIDEO STANDARD

VIDEO SELECT
VIDEO LEVEL
SYNC LVL
BURST LVL
COLOR BAR
PREVIOUS PAGE..

0
0

OFF

PAL

110

150

-16

CAMERA ID

POSITION
PREVIOUS PAGE.

CAM-001

UP-LEFT

CAMERA ID

POSITION

PREVIOUS PAGE.

CAM-001

UP-LEFT

0RYHWKHFXUVRUWRWKHOHWWHUUHTXLUHGE\XVLQJWKH

Set-Up button.

6HOHFWDQ,'IURP$%a<=DEa\]aE\XVLQJWKH

LEFT and RIGHT buttons.

5HSHDWWKHDERYHVWHSVXQWLOWKH,'LVFRPSOHWH

6HOHFWWKHSRVLWLRQZKHUHWKH,'LVWREHGLVSOD\HG

by using the LEFT and RIGHT buttons.

VIDEO STANDARD : You can control NTSC / PAL, Video level,

Sync level, Burst level.

10. How to operate key functions

DZOOM

: Digital P/T/Z are used to create a zoom lens

effect.

Zoom Factor (1X to 4X),

Pan (±100%, center of image can be moved

to left and right edges of screen),

Tilt (±100%, center of image can be moved

to top and bottom edges of screen)

SYNC

: Two synchronisation modes are available,

INTERNAL and EXTERNAL LINELOCK.

In LINE-LOCK mode, it synchronises the video

signal between cameras without a synchronous

generator.

RS485 SETUP

: This function sets up the camera

communication status when controlling

the camera through an external control

device.

RESET

: Resets the camera settings to the factory defaults.

MOTION

: This product has a feature that allows you to

observe movements of objects in on the

screen, hence a single individual can conduct

supervision efficiently.

The camera detects an object's movement by

sensing disparity of outline, and level of

brightness and colour.

PRIVACY SETUP

: Hide an area you want to hide

on the screen.

White : MOTION ZONE Position movement

INT : Internal synchronisation

LL : External line-lock synchronisation

White : PRIVACY-ZONE Position movement

Blue : PRIVACY-ZONE Size enlargement or reduction

For PRIVACY-ZONE Confirm, long press SET button

Green : MOTION ZONE Size enlargement

Red : MOTION ZONE Size reduction

For MOTION ZONE Confirm, long press SET button

MOTION DETECTION

ACTIVITY THR.

MESSAGE TIME

SETUP MOTION ZONE..

PREVIOUS PAGE.

225

DZOOM

ZOOM

PAN

TILT

PREVIOUS PAGE..

-100

100

-100

100

MOTION ZONE SETUP

PRIVACY MASK SETUP

PRIVACY MASK

MASK COLOR

PREVIOUS PAGE.

OFF

WHITE

ENABLE MASKS (1 to 6)

MASK 1
MASK 2
MASK 3
MASK 4
MASK 5
MASK 6
PREV. NEXT.

ON
OFF
OFF
OFF
OFF
OFF

ENABLE MASKS (7 to 12)

MASK 7
MASK 8
MASK 9
MASK 10
MASK 11
MASK 12
PREV.

OFF
OFF
OFF
OFF
OFF
OFF

RS485 SETUP

CAMERA # :
PROTOCOL
BAUD RATE

PREVIOUS PAGE.

1 < 1 > 255
PELCO-D
< 2400 >
< 4800 >
< 9600 >
< 19200 >

LINE LOCK

V PHASE

PREVIOUS PAGE.

519

624

The line-lock synchronisation is only used in

areas of 60Hz (NTSC) / 50Hz (PAL).

- If 'LL' is selected, it can be adjusted to the desired phase.

Press the SET button.
- Adjust to the desired phase from 0 to 624.

̰G

EXIT MENU

Saves all the setting menus and then exits.

10. How to operate key functions

12. Dimension (mm)

Before sending the camera back for repair, check the items below.
If the problem persists after checking these items, contact your distributor.

Problems

Troubleshooting

Nothing appears on the
screen.

· Check the power connections.
· Check the video signal line connection.

The video image is not
clear.

· Make sure the lens and dome cover are clean.
- Dirt or fingerprints affect the image and can cause
blooming or reflection. Gently wipe any dirt or
fingerprints from the lens and dome using a soft cloth.
· Check and adjust the monitor contrast.

The screen is dark.

· Check and adjust the monitor contrast.
· If there is any intermediate equipment, check and set the
Hi-z terminations correctly.
· Check that the power supply is within specification.
- If the power cable is too long, it may require a higher
rated power supply or additional power or video
amplification.

The camera’s surface is
too hot and black stripes
appear on the screen.

· Check if the power supply is regulated and is within the
standard requirement of the product.

Colours are not quite right.

· Check the <white balance> setting.

Weak power level.

· Check if the distance of the cable installation is too long,
and the cable is UL standard. Using a low grade cable
or a long distance cable installation can cause a
serious voltage drop. Check the voltage output level at
the cable and change the power source if necessary.
Take special care not to supply too much power to
the camera as this is equally damaging.

MODEL

Effective Pixels

Image Sensor
Effective Pixels
H.Resolution

Video Output
S/N Ratio

Min. Illumination

Gamma Correction

White balance

Power Source

Smear Effect

Operating Current (Max)

Operating Temperature

Measurement (mm)

White balance

Sync System

Noise Reduction
Camera ID

Lens

Scanning System

WDR

Humidity

Gain Control

Weight (Approx.in grams)

Sens-up
Day/Night

Specifications are subject to change without prior notice.

OSD MENU

DSF120PX

1/3" Pixim WDR digital imaging device

410,000 pixels 758(H) x 540(V)

690 HTVL effective

Internal

1.0 Vp-p composite. 75 Ohms

More than 50 dB (AGC Off)

0.1Lux at F1.4 (DSS off), 0.01Lux at F1.4(DSS on)

NTSC/PAL - compatible

CAM1~CAM255 selectable by OSD

3D DNR Motion Adaptive,2D DNR(ON/OFF)

Standard r=0.45

2,000

Ü.aÜ.

ATW / Indoor / Outdoor / AWB / MANUAL selectable by OSD

0.005%

12VDC, 12VDC/24VAC Dual Power

at 12VDC/150mA at 24VAC

12VDC : 200mA, 12VDC/24VAC Dual Power : 300mA

Within 90% RH

180(

)x81(H)

500g

Ü)aÜ)Ü&aÜ&

3.3~12mm Varlfocal Lens (F1.4)

Low/Middle/High/User(0~36)

ATW/AWC/MANUAL - User selectable

26dB/28dB/34dB/38dB/40dB/42dB/45dB/47dB/50dB/ selectable by OSD

Off/2x~32x(DSS)
Auto/Colour/BW

11. Trouble shooting guide

13. Specification

Ask a Question ?