Full Text Searchable PDF User Manual
W70MDIR
Vandal Resistant IR Dome Camera
User Manual
Vandal Resistant IR Dome Camera
2
Safety Precautions
DO NOT ATTEMPT TO DISASSEMBLE THE CAMERA.
Risk of Electric Shock, Do Not Open
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSON
This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operation and maintenance
instructions in the literature accompanying the appliance.
Vandal Resistant IR Dome Camera
3
1. This product is patented for configuration, appearance and design; copying is not permitted.
2. If this product fails to operate normally contact your authorised distributor or service centre. Never
disassemble or modify the product in any way. Problems caused by disassembly, modification or
repair invalidates the product warranty.
3. Electromagnetic fields at specific frequencies may cause image interference.
4. Only use a standard regulated power adapter. Using any other adapter could result in fire, electric
shock or damage to the product.
5. Incorrectly connecting the power supply may result in fire, electric shock or damage to the product.
6. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal
heat generation or fire.
7. Securely plug the power cord into the power receptacle. A loose connection may result in fire.
8. When installing the camera on a wall or ceiling, fasten it safely and securely. A falling camera may
cause personal injury.
9. Do not place conductive objects (e.g. screwdrivers, coins etc.) on top of the camera.
10. Do not install the unit in humid, dusty locations.
11. If any unusual smell or smoke comes from the unit, please stop using the product. In such cases,
please immediately disconnect the power source and contact your local authorised distributor or
service centre.
1. Do not drop objects on the products or apply strong shocks to it. Keep it away from locations subject
to excessive vibration or magnetic-field interference.
2. Do not install in a location subject to high temperatures (over 122°F or +50℃), low temperatures
(below 14°F or -20℃) it may cause a fire.
3. If want to relocate the installed product, turn off the power before moving or reinstalling it.
4. Remove the power plug from the outlet if there is a lightning storm. Neglecting to do so may cause
fire or damage to the product.
5. Avoid a location which is exposed to direct sunlight, or near heat sources. Neglecting to do so may
cause fire.
6. Install in a well-ventilated location.
7. Avoid aiming the camera directly towards extremely bright objects such as the sun, as this may
damage the image sensor.
Warning
Cautions
Vandal Resistant IR Dome Camera
4
1. Read these instructions
2. Keep these instructions for later use.
3. Pay attention to all warnings and adhere to them.
4. Follow all instructions.
5. Do not immerse this product in water.
6. Clean only with a lint free dry cloth.
7. Do not block any ventilation openings.
8. Do not install near any heat sources such as radiations, heat registers, or other products (including
amplifiers) that produce heat.
9. Protect the power cord from being walked on or being pinched, especially at power receptacles, and
the point where they exit from the camera.
10. Only use accessories specified by the manufacturer.
11. For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the power.
12. Refer all servicing to qualified service personnel. Servicing is required when the product has been
damaged in any way, such as power supply cord or plug is damaged, it does not operate normally, or
has been dropped.
13. Do not operate the camera beyond its temperature, humidity or power source ratings. Operating
temperature: 14F-122F (-20℃-50℃), Humidity >85%
14. Do not point the camera towards the sun, spotlights or reflective surfaces.
15. Laser beams will damage the image sensor. Do not project laser beam directly into the lens of the
camera.
Important Safety Instructions
Vandal Resistant IR Dome Camera
5
Contents
Chapter 1 - Overview....................................................................................6
Features..........................................................................................................................6
Specification....................................................................................................................6
Package..........................................................................................................................6
Product Parts..................................................................................................................7
Chapter 2 - Operating Instructions.............................................................7
Connection......................................................................................................................7
Installation.......................................................................................................................8
Chapter 3 - Common Troubleshooting......................................................9
Chapter 4 - Current Maintenance................................................................9
Vandal Resistant IR Dome Camera
6
Chapter 1 - Overview
Features
• Built-in 3.6mm 1/3” IR 1.3 Megapixel Lens
• Built-in ICR
• 2 Piece IR LED Array, Total Power 4W
• Visible Range of up to 10m in Ideal Conditions
• 3-Axis Vertical / Horizontal / Rotational
• Full Metal Body Vandal Resistant
• Water Resistant IP66
Model Number
W70MDIR
Image Sensor
CMOS
Video Format
PAL
Effective Pixels
720 (H) x 576 (V)
Horizontal Resolution
700 TVL
Minimum Illumination
0.01Lux @ (F1.2,AGC ON),0 Lux with IR
Shutter Time
Auto
Day & Night
IR Cut Filter with Auto Switch
Sync System
Internal
Video Output
1Vp-p Composite Output (75Ω/BNC)
S/N Ratio
> 50dB
BLC
On
Lens
3.6mm IR 1.3MP
Angle of View
70°
Mount
M12
IR Light
2 Piece Array LED (2W Each)
IR Range
10m in Ideal Conditions
Weather Proof
IP66
Power Supply
DC12V
Power Consumption
Max. 6W with IR LED’s On
Operating Conditions
- 20°C ~ 50°C
Bracket
3-Axis Movement
Dimension (D x H)
71.4 × 72.7 mm
Weight
260g
Specification
*Design and Specifications are subject to change without notice.
Package
Check the contents of the package. The following items are included:
• 1x User Manual
• 1x IR Dome Camera
• 3x Fixed Screws with Dielectric Covers
• 1x Dielectric Paper
• 1x L-Type Screw Driver
Vandal Resistant IR Dome Camera
7
Chapter 2 - Operating Instructions
Product Parts
1
2
3
4
5
6
Fixed Base
Connecting Ring
Housing Body
Eyeball
IR LED Array
Photovaristor
1. Fixed Base - Fixes the camera to the ceiling or wall
2. Connecting Ring - Fixes the main housing and eyeball to the correct angle of view
3. Housing Body - Holds the eyeball assembly in position
4. Eyeball - Contains the electronics, lens and LED array
5. IR LED Array - Provides light source in darkness
6. Photovaristor – Photocell used to switch the IR LED On/Off
Connection
1. Connect one end of the BNC Cable to the terminals of a monitor or recording device.
2. Connect the other end of the BNC Cable to the camera VIDEO OUT terminal.
3. Then, plug the power adapter into the power receptacle. The image will be displayed when the monitor
is on.
Vandal Resistant IR Dome Camera
8
Installation
Before Installation
Read the cautions before installation:
1. Make sure the installation location can support 5 times the total weight of the dome camera.
2. Make sure the cable doesn’t get jammed inappropriately or allow the cable insulation to get damaged
during installation. This may result in a malfunction or a fire hazard.
3. Make sure that nobody is beneath the installation location.
Installing the Camera
The installation process is illustrated below:
Step 1
Place the dielectric paper on the wall / ceiling (this is to protect the camera from damage by conducted
currents). Then, fix the camera base to the wall / ceiling with the 3 screws provided.
*Pay attention to the cable trough. Point it in the direction of the power supply if cables exit there.
Step 2
Attach the camera body to the base.
Step 3
Rotate the eyeball to set the monitoring direction.
Step 4
Tighten the connecting ring to finish the installation.
Cable Trough
Cautions for Installation:
1. Allow the cable to pass through the hole in the middle before mounting the camera to the base.
2. If passing through the side, the cable must be put in the cable trough first before the camera is
mounted.
Vandal Resistant IR Dome Camera
9
Chapter 3 - Common Troubleshooting
If you encounter trouble in using the camera, refer to the instructions below. For more information, please
consult your local authorised distributor or service centre.
Problem
Solution
No Video Output
Check the power supply, or the connection among the
cable, camera and monitor.
Malfunction
Check whether the camera is connected to the DC12V
power supply.
Light Image
Adjust the display contrast of the monitor; Change the
location if the camera is exposed to intense light.
Dark Image
Adjust the Brightness.
The situations below are not malfunctions of the camera.
Problem
Solution
Vertical Streak
May appear when the camera is exposed to intense
light.
Fixed Image Clutter
When the camera is in a high temperature environment,
there may be fixed image clutter on the entire monitor
screen.
Jagged Image
When shooting at a ribbon-like object, a straight line or
something with a similar pattern, the image displayed on
the monitor may be serrated.
Chapter 4 - Current Maintenance
1. Regularly clean the dust and dirt from the lens surface of the camera with a dry lint free cloth to
maintain clarity of image.
2. Clean the camera body with dry soft cloth. For stubborn dirt, wipe it with a cloth dipped in a little
neutral detergent, and then dry the camera.
3. Do not use volatile chemicals, such as thinners, alcohol, benzene etc. to clean the camera, because
they can damage the surface coating, and even weaken the functionality and performance of the
camera.
Vandal Resistant IR Dome Camera
10
Memo
Vandal Resistant IR Dome Camera
11
Memo
GENIE CCTV LTD.
CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT
Tel: +44 (0) 1707 330541 Fax: +44 (0) 1707 330543
www.geniecctv.com
Edition. GN-December 2013