Genie CCTV PIXIM VRD83SPX Instruction Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

PIXIM Digital Day/Night Vandal Resistant Dome Camera

INFORMATION -

This equipment has been tested and found to comply with

limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

◆

Do NOT use power sources other than those specified.

This installation should be made by a qualified service person and

should conform to all local codes.

The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

WARNING -

Changes or modifications not expressly approved by the

manufacturer could void the user's authority to operate the equipment.

CAUTION :

To prevent electric shock and risk of fire hazards:

How to Use the Camera

■

Settings

ㆍ

PRESETS

ㆍ

EXPOSURE

ㆍ

WDR

ㆍ

WHITE BALANCE

ㆍ

DAY&NIGHT

ㆍ

IMAGE ADJ.

ㆍ

SPECIAL

- CAMERA ID
- VIDEO OUT
- DZOOM
- MOTION
- PRIVACY MASK
- SYNC
- RESET

ㆍ

EXIT MEMU

25
26
26
26
27
28
28

Troubleshooting

Specifications

PIXIM Digital Day/Night Vandal Resistant Dome Camera

Features

Warnings and Precautions

Names and Functions of Parts

Installation

Cable Connection

Dimensions

■

LENS

■

OSD

■

VBS-EXTRA

■

3 AXIS BRACKET

■

SMPS

Components

■

Contents

PIXIM Digital Day/Night Vandal Resistant Dome Camera

Additional Functions

SYNC (INT/LL), SENS-UP, FREEZE, FLIP

(H/V-REV), D-ZOOM, SHARPNESS and

PRIVACY functions are provided.

Controlled by OSD Menu

The camera can be controlled by selecting

text displayed on the monitor screen.

Motion Detection

Since the camera detects motion without any

additional external sensor, you can monitor

activity more efficient.

Programmable GAMMA Processing

Weatherproof (IP67)

■

Features

Warning

■

The camera requires periodic inspection.

Contact an authorised technician to carry out the inspection.

Stop using your camera when you find it malfunctioning.

If the camera emits smoke or is unusually hot for a long period,

a fire may be caused.

Do not Install the camera on a surface that can not support it.

If the camera is installed on an inappropriate surface, it may fall

and cause injury.

Do not hold plug with wet hands.

It could cause an electric shock.

Do not dis-assemble the camera.

It may result in an electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in a fire or other hazards.

3 Axis built-in Vandal Resistant

Dome Housing

Wide Dynamic Range (WDR)

The camera delivers clear high quality pictures,

even when backlit, by increasing exposure in

dark areas while decreasing it in bright areas;

a corrected image with clear details results.

ㆍ

120dB maximum dynamic range

High Resolution Colour for Crisp,

Clear Video

ㆍ

Progressive image capture

ㆍ

690TVL Effective

Day & Night

The camera identifies whether it is day or night

and automatically switches to the appropriate

mode, depending on its environment. By day,

the camera switches to colour mode in order to

maintain optimal colour. At night, it switches to

B/W mode so as to obtain better picture definition.

High Sensitivity for low-light

images

The built-in high sensitivity PIXIM SEAWOLF

Sensor enables a clear image even at 0.1Lux

DNR (Digital Noise Reduction)

The amount of low illuminance noise has been

significantly reduced, and the signal-to-noise

ratio (S/N ratio) as well as horizontal resolution,

have been improved resulting in a clear and

sharp image image even in low light.

PIXIM Digital Day/Night Vandal Resistant Dome Camera

Do not install the camera in

extreme temperature conditions.

Do not install the camera under

unstable lighting conditions.

Do not touch the front lens of the

camera.

Only use the camera under conditions

where temperatures are between

-10

C and +50

C. Be especially

careful to provide ventilation when

operating under high temperatures.

It can cause the image quality to be

poor.

Severe lighting change or flicker can

cause the camera to work improperly.

This is one of the most important parts

of the camera. Be careful not to leave

fingerprints on the lens cover.

Do not install or use the camera in an

environment where the humidity is high.

It can cause malfunctions to occur.

Do not drop the camera or protect

it from physical shocks.

ㆍ

If the camera is exposed to spotlight or an object reflecting strong light,
smear or blooming may occur.

ㆍ

Please check the power supply satisfies the normal specification before
connecting the camera.

If exposed to radioactivity the CMOS

will fail.

Do not expose the camera to

radioactivity.

■

Precautions

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

Components

Names and Functions of Parts

■

4. WIRE FOR VBS-EXTRA

5. INSTRUCTION GUIDE

1. COLOUR DOME CAMERA

2. SCREWS

3. WRENCH

③

④
⑤

②

①

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

Names and Functions of Parts

■

②

OSD PCB

●

SET button

: Used for the menu display. This button can be used to

confirm settings after changing the value of the selected function or

current conditions.

●

UP & DOWN buttons

: Used for selecting items by moving the cursor

up or down on the menu screen.

●

LEFT & RIGHT buttons

: Used when changing item values, by moving

the cursor to the left or right on the menu screen.

①

LENS : Vari-Focal DC Auto Iris Lens

Dimensions

■

③

VBS-EXTRA FOR CONNECTING TO LCD

Please use the supplied wire when connecting to an external monitor.

VBS-EXTRA

⑤

3 AXIS BRACKET

Please loosen screws and fix tilted and panned position.

④

SMPS PCB FOR DUAL POWER - IF APPLICABLE

(unit : mm)

100.0

152.0

83.5

DOWN

SET

RIGHT

LEFT

■

Installation

Dome Base

Decoration Ring

Surface Mount Bracket

Security Screws
with "O" ring

Dome Cover

DC only

AC24V
DC12V

AC IN

DC IN

AC IN

DC IN

VIDEO

POWER

Cable Connections

■

1. Dome Base Mounting

- Open the dome cover by loosening the 3 screws using the special

wrench provided.

- Mount the base of camera to a sturdy surface using the 4 screws (1.5

inch) and the 4 premade holes on the base of the dome.

2. Power Connection & Monitor Impedance

- DC12V/300mA regulated power supply (DC12V only)

AC24V Class 2 power supply (AC24V/DC12V)

- To avoid fire or shock hazard, always use a CE listed power supply.
- Set the monitor impedance switch to 75

Ω

. Check the impedance

switch if the screen appears blurred.

3. Camera Module Adjustment

- Loosen screws for the 3-axis camera bracket to adjust the cameras

angle of view.
- Make sure to retighten the camera bracket screws.
- Use the OSD buttons to select the different camera functions.

4. Dome Cover Mounting

- Replace the dome cover to the base and tighten the 3 screws.

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

How to Use the Camera

■

Menu

Settings can be made using the 5 buttons located in the camera.

. Press the SET button

ㆍ

Settings can now be made. The SETUP menu is displayed on the monitor.

2. Select a menu item from the list available by using the UP and DOWN

buttons.

ㆍ

Funtions are selected using up and down buttons.

ㆍ

The selected position is displayed in blue.

■

Settings

SETUP

PRESETS

EXPOSURE..

WDR

WHITE BALANCE

DAY&NIGHT

IMAGE ADJ..

SPECIAL..

EXIT MENU.

NORMAL

MIDDLE

ATW

AUTO..

ㆍ

NORMAL

SETUP menu

PRESETS

EXPOSURE

WDR

WHITE BALANCE

DAY&NIGHT

IMAGE ADJ.

EXIT MENU

ㆍ

MIDDLE

ㆍ

LOW

ㆍ

RESET

ㆍ

CAMERA ID

ㆍ

MOTION

ㆍ

ATW

ㆍ

AWB

ㆍ

BACKLIGHT

ㆍ

FREEZE

ㆍ

AUTO

SPECIAL

ㆍ

VERSION

ㆍ

CANCEL

ㆍ

COLOR GAIN

ㆍ

INDOOR

ㆍ

MANUAL

ㆍ

HIGH

ㆍ

VIDEO OUT

ㆍ

PRIVACY MASK

ㆍ

INDOOR

ㆍ

SAVE&EXIT

ㆍ

FLIP

ㆍ

GAMMA

ㆍ

COLOR

ㆍ

LENS SELECT

ㆍ

DNR

ㆍ

COLOR ROLL

ㆍ

SENS-UP

ㆍ

EXPOSURE MODE

ㆍ

BLC

ㆍ

HIGHLIGHT

ㆍ

AGC

ㆍ

OUTDOOR

ㆍ

OUTDOOR

ㆍ

DEFAULT

ㆍ

SHARPNESS

ㆍ

USER

ㆍ

DZOOM

ㆍ

SYNC

ㆍ

FOCUS

DOWN

SET

RIGHT

LEFT

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

How to Use the Camera

SETUP

PRESETS

EXPOSURE..

WDR

WHITE BALANCE

DAY&NIGHT

IMAGE ADJ..

SPECIAL..

EXIT MENU.

NORMAL

MIDDLE

ATW

AUTO..

3. Set up a selected item by using the Left and Right buttons.
4. To finish and save the settings, select 'EXIT MENU' and press the SET button.

Select the function

using the UP or

DOWN button.

Change the status
using the LEFT or
RIGHT button.

PRESETS

Note

• An item with the .. icon also has sub-menus. To select a sub-menu,
press the SET button.

SETUP

PRESETS

EXPOSURE..

WDR

WHITE BALANCE

DAY&NIGHT

IMAGE ADJ..

SPECIAL..

EXIT MENU.

NORMAL

MIDDLE

ATW

AUTO..

●

NORMAL

: Normal environment.

●

INDOOR

: Indoor environment.

●

OUTDOOR

: Outdoor environment.

●

BACKLIGHT

: Backlight environment.

LENS MENU

DC GAIN

AI THRESH

PREVIOUS PAGE..

120

255

-24

-48

EXPOSURE

SETUP

PRESETS

EXPOSURE..

WDR

WHITE BALANCE

DAY&NIGHT

NORMAL

MIDDLE

ATW

AUTO..

When the SETUP menu screen is displayed, select

‘

EXPOSURE

’

using the Up and Down buttons so that the arrow indicates

‘

EXPOSURE

’

●

LENS SELECT

: Using this function, you can control the screen brightness.

ㆍ

DC / Manual : Select Lens Type.

EXPOSURE

LENS SELECT

BLC

EXPOSURE MODE

AGC

DNR

HIGHLIGHT

COLOR ROLL

SENS-UP

PREVIOUS PAGE..

DC..

OFF

50 i

MEDIUM

MIDDLE

OFF

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

How to Use the Camera

●

EXPOSURE MODE

: To select the number of fields and number

of exposure cycles.
- 50i /25p selectable

●

AGC (AUTO GAIN CONTROL)

: In dark environments, the higher the

gain level, the brighter the screen but the higher the noise.
- OFF / LOW / MEDIUM / HIGH selectable

●

DNR (Digital Noise Reduction)

: The level of background noise in low

light decreases automatically as the level of gain changes.
- OFF / LOW / MIDDLE / HIGH selectable

●

HIGHLIGHT

: To optimise the scene when high dynamic range lighting

                              is detected.
      - ON : bright parts of the image are most visible.
      - OFF : dark parts of the image are most visible.

●

COLOR ROLL

: To control a detector that finds colour fluorescent roll.

- OFF / LOW / HIGH selectable

●

SENS-UP

: When it is night or dark, the camera automatically detects

the light level and maintains a clear picture if this mode is activated.

- 2X, 4X, 8X, 16X, 32X
- OFF : Deactivates the SENS-UP function.

●

BLC

: To optimize the scene when there is a strong backlight behind

the object.
- ON / OFF selectable

ADVANCED BLC SETUP

PERCENTILE

PREV. SAVE. CANCEL.

WDR

●

WDR

: When the image has simultaneous bright and dark areas, the

Wide Dynamic Range makes both areas distinct.

- LOW / MIDDLE / HIGH / USER selectable

WDR LEVEL

BIAS

LIMIT

PREVIOUS PAGE..

-30

SETUP

PRESETS

EXPOSURE..

WDR

WHITE BALANCE

DAY&NIGHT

IMAGE ADJ..

SPECIAL..

EXIT MENU.

NORMAL

MIDDLE

ATW

AUTO..

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

How to Use the Camera

MANUAL WHITE BALANCE

RED

BLUE

PREVIOUS PAGE..

-18

-20

WHITE BALANCE

Use the White Balance function to adjust the screen colours.
1. Position the cursor to point to WHITE BAL on the SETUP menu screen,
select using the Up and Down buttons.
2. Select the desired mode using the Left and Right buttons.

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY&NIGHT
IMAGE ADJ..
SPECIAL..

NORMAL

MIDDLE
ATW
AUTO..

※

Select one of the following 5 modes, as appropriate.

●

ATW

: The ATW mode continuously monitors.

●

INDOOR

: Select when the colour temperature is between 4000

and 8500

●

OUTDOOR

: Select when the colour temperature is between 2000

and 11000

●

AWB

: To obtain the optimum state under the current luminance

         levels, direct the camera to point toward a sheet of white paper and
         press the SET button. If the environment changes, including the light
         source, the white balance will require re-adjustment.

●

MANUAL

: Select to "fine-tune" the White Balance manually. Set

         White Balance first using the ATW or AWB mode. Afterwards switch
         to MANUAL mode, fine-tune the White Balance and then press
         the SET button.

DAY&NIGHT

Note

• Under the following conditions White Balance may not work properly.

In such cases, select the AWC mode.

①

When the colour temperature of the subject environment has a very
high temperature range (e.g. clear sky, or sunset)

②

When the ambient illumination of the subject is low.

③

If the camera is directed toward a fluorescent light, or is installed in
a place where illumination changes dramatically, the White Balance
operation may become unstable.

●

AUTO

: This camera has a function which automatically changes to

the appropriate mode according to lighting levels. To set up the switching
time for the AUTO mode press the SET button.

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY&NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

How to Use the Camera

●

COLOR

: The picture is displayed in colour.

●

B/W

: The picture is always displayed in black and white.

When the SETUP menu screen is displayed, select 'IMAGE ADJ.' using
the Up and Down buttons.

SETUP

PRESETS

EXPOSURE..

WDR

WHITE BALANCE

DAY&NIGHT

IMAGE ADJ..

SPECIAL..

EXIT MENU.

NORMAL

MIDDLE

ATW

AUTO..

IMAGE ADJ.

●

FREEZE

: View still pictures.

- OFF / ON selectable

●

FLIP :

OFF / HORIZ / VERT / BOTH selectable

●

SHARPNESS

: The outline of the video image becomes cleaner and

     more distinctive as the level of SHARPNESS increases. If the level gose
     up excessively, however, it may affect the video image and generate noise.
       - The available range of level is -8 ~ 8

●

COLOR GAIN

: To control the colour level in the video.

- The available range of level is -8 ~ 8

●

GAMMA

: Users can change the gamma setting between 25 and100

IMAGE

FREEZE

FLIP

SHARPNESS

COLOR GAIN

GAMMA

FOCUS..

PREVIOUS PAGE..

OFF

-8

100

BOTH

VERT

HORIZ

OFF

DAY&NIGHT SETUP

NIGHT MODE

TIME DELAY

PREVIOUS PAGE..

BW +burst
BW
COLOR

255

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

How to Use the Camera

SPECIAL

When the SETUP menu screen is displayed, select 'SPECIAL' by using
the Up and Down buttons so that the arrow indicates 'SPECIAL'.

SETUP

PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY&NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.

NORMAL

MIDDLE
ATW
AUTO..

●

FOCUS

: To adjust the lens focus.

FOCUS DETECTOR

FOCUS METER
SET FOCUS REGION..
PREVIOUS PAGE..

SET FOCUS REGION

●

CAMERA ID

: User can enter a unique name for the respective camera.

The maximum length of the ID is ten characters.

ㆍ

You can choose the ON and OFF with the selector. If you select ON,

the entered camera ID is displayed at the selected position in the video
picture (normal operation).

ㆍ

Please select the setup button while in On mode.

ㆍ

Select the desired position with the selector.

①

Move the cursor to the letter required by using the Set-Up button.

②

Select an ID from A,B~Y,Z, a,b~y,z, 0,1~8,9 by using the LEFT and

RIGHT buttons.

③

Repeat the above steps until the ID is complete.

CAMERA ID

ID
POSITION
PREVIOUS PAGE..

CAM-001
UP-LEFT

CAMERA ID

ID
POSITION
PREVIOUS PAGE..

CAM-001
UP-LEFT

SPECIAL

CAMERA ID
VIDEO OUT..
DZOOM
MOTION
PRIVACY MASK..
SYNC
RESET
PREVIOUS PAGE..

OFF

OFF
OFF

INT

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

How to Use the Camera

●

DZOOM

: Digital P/T/Z are used to create a zoom lens effect.

Zoom Factor (1X to 4X), Pan (

100%, center of image can be moved

to left and right edges of screen), Tilt (

100%, center of image can

be moved to top and bottom edges of screen)

●

MOTION

: This product has a feature that allows you to observe

     movements of objects in on the screen, hence a single individual can
     conduct supervision efficiently.
     The camera detects an object's movement by sensing disparity of
     outline, and level of brightness and colour.

DZOOM

ZOOM
PAN
TILT
PREVIOUS PAGE..

1
0
0

-100

100

-100

100

VIDEO STANDARD

VIDEO SELECT
VIDEO LEVEL
SYNC LVL
BURST LVL
COLOR BAR
PREVIOUS PAGE..

0
0

OFF

PAL

110

150

-16

- VIDEO STANDARD : You can control NTSC / PAL, Video level,
Sync level, Burst level.

①

Select the position where the ID is to be displayed by using the

LEFT and RIGHT buttons.

●

VIDEO OUT

: Move the cursor to select the video system

MOTION DETECTION

ACTIVITY THR.

MESSAGE TIME

SETUP MOTION ZONE..

PREVIOUS PAGE..

255

MOTION ZONE SETUP

●

PRIVACY MASK

: Hide an area you want to hide on the screen.

ㆍ

White : MOTION ZONE Position movement

Green : MOTION ZONE Size enlargement
Red : MOTION ZONE Size reduction

ㆍ

For MOTION ZONE Confirm, long press SET button

PRIVACY MASK SETUP

PRIVACY MASK

MASK COLOR

PREVIOUS PAGE..

OFF

WHITE

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

How to Use the Camera

●

SYNC

: Two synchronisation modes are available, INTERNAL and

     EXTERNAL LINELOCK. In LINE-LOCK mode, it synchronises the
     video signal between cameras without a synchronous generator.
     The line-lock synchronisation is only used in areas of 60Hz (NTSC)
     / 50Hz (PAL).

- INT : Internal synchronisation
- LL : External line-lock synchronisation

ㆍ

If 'LL' is selected, it can be adjusted to the desired phase.

Press the SET button.

ㆍ

Adjust to the desired phase from 0 to 624.

LINE LOCK

V PHASE

PREVIOUS PAGE..

299

624

ENABLE MASKS (1 to 6)

MASK 1

MASK 2

MASK 3

MASK 4

MASK 5

MASK 6

PREV. NEXT.

OFF

ENABLE MASKS (7 to 12)

MASK 7

MASK 8

MASK 9

MASK 10

MASK 11

MASK 12

PREVIOUS PAGE..

OFF

ㆍ

White : PRIVACY-ZONE

                Position movement
    Blue : PRIVACY-ZONE Size
              enlargement or reduction

ㆍ

For PRIVACY-ZONE Confirm,

long press SET button

●

RESET

: Resets the camera.

EXIT MENU

VERSION :

SAVE&EXIT

DEFAULT

CANCEL

7.3.2-7.0.281

EXIT MENU.

●

VERSION

: 7.3.2-7.0.281

●

SAVE&EXIT

: Saves all the setting menus and then exits.

●

DEFAULT

: Resets the camera settings to the factory defaults.

●

CANCEL

: Cancel to the camera settings.

If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorised technician.

Problem

Nothing appears on

the screen.

The image on the

screen is dim.

• Check the power connections.

• Check the VIDEO signal line connection.

• Make sure the lens is clean. Clean the lens with a

soft clean lint free cloth.

• Adjust the monitor contrast & brightness controls.

• Re-position the camera if necessary.

The image on the

screen is dark.

• Adjust the contrast control of the monitor.

• If you have an intermediate device, set the 75

Ω

/ Hi-z

properly.

The camera is not working

properly, and the surface

of the camera is hot.

• Check that an appropriate power source is

connected to the camera.

The Motion Detection

function does not

work.

• Check that MOTION DET in the SPECIAL SETUP

is not set to 'OFF'.

Solution

PIXIM Digital Day/Night Vandal Resistant Dome Camera

■

Troubleshooting

Problem

Colour is not correct.

• Check the WHITE BAL settings in the SETUP menu.

The screen flickers

continually.

• Check that the camera is not facing toward the

sun.

Solution

※

POWER OPTION - DC12V Only : VRD83SPX/12

PIXIM Digital Day/Night Vandal Resistant Dome Camera

ITEM

Image Sensor
Signal processing
Transfer Format
Sync. System
Effective Pixels
Lens
Horizontal Angle of View
Dynamic Range
Horizontal Resolution
Min. Illumination
Day & Night
White Balance
WB Range
Shutter Speed
Sens-up
Privacy Masking
AGC
Image Flip
Camera ID
S/N Ratio
Video Output
OSD
Operating Humidity
Operating Temp.
Weatherproof
Weight

Power Consumption

PIXIM 1/3" High Sensitivity Digital Sensor

17-bit Digital Signal Processing

Progressive with Segmented Frames

Internal / Line Lock

758(H) x 540(V)

Tamron 2.8mm ~10.5mm DC AI VF Lens

93.7

~ 28.3

120dB(Max), 102dB(Typical)

690TVL Effective

0.1Lux

AUTO / COLOR / B/W

ATW / AWB / INDOOR / OUTDOOR / MANUAL

2000

K~11,000

up to 1/30, 720 sec

AUTO / OFF (Selectable x2 ~ x32)

12 Zones

OFF / LOW / MEDIUM / HIGH

OFF / HORIZ / VERT / BOTH

ON / OFF

More than 50dB

Composite video output 75 ohm terminated

Built-in

30% ~ 90% RH

-10

C to 50

IP67

Appro. 1,100g

160mA (DC12V Only)

170mA (AC24V) / 250mA (DC12V)

SPEC.

■

Specifications

Edition. GN-OCTOBER 2011

GENIE CCTV LTD.

CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT

Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543

www.geniecctv.com

PIXIM Digital Day/Night

Vandal Resistant

Dome Camera

Instruction Guide

Model : VRD83SPX

VRD83SPX/12

Ask a Question ?