Full Text Searchable PDF User Manual
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
1
PCI Express Hybrid ATSC/QAM X5075
Quick Install Manual
Introduction
Defining the PCI Express Hybrid
ATSC/QAM X5075
Important Notice: “All channels are subject to coverage and may be changed from time to
time. Reception may depend on the type and condition of your existing aerial. Aerial
upgrade may be required. Please confirm coverage in your area.” We strongly recommend
that you install an outdoors antenna when you use the DTV receiver indoors.
Defining X5075
X5075 is a small board that is plugged into a PCI Express slot of your computer.
It
’
s fully
compatible with your desktop PC use. Lets you enjoy digital (FTA) Radio and TV programs
and Analog TV programs.
Feature
• Advanced TV Application
Supports Digital HDTV for
ATSC/QAM
& Analog TV for NTSC
Rewind and fast forward live TV shows with Always Time Shifting recording
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
2
Electronic Program Guide (EPG, by 3
rd
party software)
Support HDTV Receiving up to 1920 X 1080i
• Listen to digital radio
Receive digital radio stations from your PC
Automatic station searching
Create favorite stations for convenient listening
• Digital Personal Video Recording
Schedule TV recording and save directly to your PC’s hard drive
Installing the
Hybrid DVB-T X5075
device
Summary
In this chapter the system requirements and the installation of the Hybrid
ATSC/QAM
X5075
device are described.
System requirements
Recommended OS system
（
Watching TV and recording
）
IBM compatible PC with Pentium 4, 2.0GHz or above,
At least
256 MB RAM, 512 MB RAM recommended
At least 30MB free hard disc space
Sound Blaster compatible audio card
3D graphic card recommended (with hardware overlay support, up to date
Drivers)
One free PCI Express interface
Sound card for audio
Supported operating systems:
Windows XP
Windows Vista
Windows 7
Additional requirements:
DirectX 9 or higher
MediaPlayer 9 or higher
At least 10GB hard disc space or above, that’s necessary for DVR functionality
Additional system requirements for PCI Express devices
1 available PCI Express slot for each PCI Express card (do not use the one directly under AGP
graphic card connector).
If you use a multiple number of PCI Express cards, you have to calculate with a current of 4A on the
5V rail for each of the used PCI Express Hybrid
ATSC/QAM
X5075PCI Express card.
Recommended system requirements for HDTV reception
Hybrid ATSC/QAM X5075
IBM compatible PC with Intel Pentium 4 or AMD Athlon XP CPU with 2400MHz or above
3D AGP or PCI express graphic card recommended (with MPEG2 hardware acceleration,
hardware overlay support and up to date drivers)
Recommended operating systems:
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
3
Windows XP
Windows Vista
Windows 7
Important information
For best results, a screen resolution of 800 x 600 pixels with 16 bit color dept or higher is
recommended for use with DTV applications. A screen resolution of at least 1280x1024 pixels with
24 bit color dept or higher is recommended for HDTV.
You should update all your system drivers (main board, graphics, sound and network adapter
drivers) to the current version before installing the driver for the DTV-PC TV device. You also should
update your operating system with all service packs and hot fixes available.
Package contents
X5075 ATSC/QAM Hybrid Device x1
Remote Cable x1
Remote Controller x1
Multi-Function Cable x1
Quick installation Guide x1 (PDF format only)
Software CD (Driver and Application Software)
Installation of the Hybrid
ATSC/QAM
X5075 Device
Installation of the PCI Express device
To install the
Hybrid
ATSC/QAM
X5075
PCI Express board make certain that the computer is
turned off. Precede the following steps to install the PCI Express card into your PC system:
1. Turn off the PC.
2. Open the case of your computer to expose the PCI Express slots.
3. Now you have to choose a free PCI Express slot. If possible choose a different slot than the slot
next to your AGP connector.
4. Unscrew the metal dust protector of the slot you have chosen.
5. Put the Hybrid
ATSC/QAM
X5075 board into the PCI E slot.
Figure 2.1: Inserting the DTV board into a PCI EXPRESS slot
6. Tighten the screw on the
Hybrid
ATSC/QAM
X5075
board.
7. Repeat the steps 3 to 6 for any additional PCI E xpress card you want to install.
8. Close the case of your computer case.
Your Hybrid
ATSC/QAM
X5075 hardware is installed now.
Installing the driver and software
Summary
In this chapter the installation of Hybrid
ATSC/QAM
X5075 PCI EXPRESS is exemplary
described for the operating system Windows XP ,Windows vista and Windows7.
Install the driver
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
4
Turn on the PC. Insert the install CD to CD ROM. Then plug the X5075into one of the PCI E
port:
Step1:
When you start your computer for the first time after installing the Hybrid DVB-T X50753
PCI Express
card, the message “
Found New Hardware
” appears.
Please choose “
Cancel
”.
Step2:
When insert CD, OS will promote setup automatically
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
5
Step3:
Run
“Software Install”
Computer will now automatically show an install page, click
“
Next
”
Step4:
OS will promote to install devices
，
Click
“Continue Anyway”
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
6
Step5:
Click “
F in ish
” to completely install the Driver Software
Installing TotalMedia
Step6:
Installation of Total Media, Choose setup languag
Step7:
Click “
Next
” to continue installation
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
7
Step8:
Click “
Yes
” and then it will install “
Arcsoft TotalMedia
”
Step9:
I
f you want to change the destination folder, please click “
Browse
” and click “
next
”
(Recommended is better)
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
8
Step10:
Please click
“
Next
”
Step11:
Program starts to copy files.
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
9
Step12:
Click “
Finish
”, the Arcsoft TotalMedia software is installed on your computer.
Step13:
You will see that DVB-T application icons will appear on your desktop.
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
10
When all finished, please check on Control panel, select
“
System
”—“
System
properties
”—“
Device
Manager
”, you can see one device installed.
Arcsoft Total Media Users
How to use TotalMedia, you can get online help.
Connection
Summary
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
11
X5075 Connection
Connecting
Hybrid
ATSC/QAM
X5075 TV Receiver
to PCI Express interface on
your PC
1. Connecting A nalog TV Cable (for analog TV) or digital antenna (for digital TV) to
Hybrid
X5075 TV Receiver
.
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
12
3. When you want to switch Analog, please switch to Analog Cable
4. Input & Output Connections
Remote Controller Button List
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
13
1
TV/AV:
Switch between S-Video, Composite, and TV
2
TotalMedia:
Open/Close
TotalMedia
Software
3
0 - 9:
Channel Number Keys
4
ESC:
Return
5
M UTE:
On/Off volume mute
6
Up
Down
Left
Right
OK
7,8
CH+/CH-:
Channel Up/Channel Down
9
、
10 VOL-/VOL+:
Volume Down/Volume Up
11
Record:
Record/Stop recording the current program
Play:
Play a recorded program
Pause:
Pause a program
Stop:
Stops pre-recorded viewing and returns to live TV
Forward:
Forward the current movie clip
Rewind:
Rewind the current movie clip
Time-Shift:
Time-Shift function
Snapshot:
Takes a picture of what is on screen
Show/Hide Control Center:
Show/hides the display panel
Full Screen/Restore:
Switches from full screen to the
default screen
Shuffle:
TV wall function
Power:
Turns computer off
Trouble shooting
1. Can not lock any program channel when auto scan.
1. Please check if there is ATSC/QAM broad casting program in your area;
2. Please check if your signal condition is too weak, try to move the antenna around
and re-scan again, it is better to move the antenna near the window
3. Please check you connect the antenna and tightly
4. Please check you select right country in the Total Media software scan function
page.
5. Please try to use an outdoor antenna and scan once more.
PCI Express Hybrid ATSC/QAM X5075 V
6.14.10.393
14
2. I do find some channels, but this time I get fewer channels than last time
1.
Maybe you moved antenna’s position or angle, try to find the better position and keep
the antenna vertical
2. The weather also can also affect your receiving signal quality, if the weat her is bad today,
that is the reason
3. In some new start ATSC/QAM broadcasting area, the provider of ATSC/QAM
broadcasting may change their broadcasting power
day by day, try to find the best
power strength.
4. If you put a CAN of cola on the antenna, that will make signal weak, please move them
away.
3. When I watch program, Screen blacked out when playing or freezes on first
picture.
Unfortunately, you are in a weak signal condition.
4. Video playing but Audio failed
Please check the sound card or the volume setting.
5. Remote control does not work
1. Check remote controller batteries.
2. Check remote receiver: the light will be on when receive, that is showing it is getting
signal.
3. Check if you are in 5m between the Remote Receiver
, don’t keep to far away.
4. Please point the receive window, that is to say, the angle of the receiving and sending is
important
6. Watching TV some time freeze or slow, also audio stroke
1. Please check your PC is not Pentium 3 or 2, X5075need a high CPU to decoding DVB-T
stream
2.
Please check you VGA driver is properly installed and updated
3.
Please don’t run other high CPU loading software such as game and CAD.