GG R1 User Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

GG T

elecom

GG Telecom

Bluetooth

HandsfreeKit

ALSO KNOW AS < R1 / RX-1 / RX-7 / GX-7 / MZ-1 / MX-5 / TX-5 / TX-7 >

For More Info : www.gg2002.com

Thank you for purchasing the R1 Bluetooth Handsfree Kit.
This guide contains instructions for setting up and using the new Handsfree kit.
Please refer to the Safety Information in this booklet for important product safety
information prior to the use of the product.

Welcome

Intelligent Voice Operator ™

Announces the ID of the caller when the phone rings.
Announces “HELLO” when you on the headset.
Announces “GOODBYE” when you turn off the headset.
Announces “PAIRING SUCCESSFUL”.
Announces “PAIRING CODE 0000”

(available in 9 different language )

Introducing the technology.

Your Handsfree Kit incorporates iVOICE AUTOPAIR™ Technology to
simplify the Bluetooth setup process.

iVOICE AUTOPAIR ™ Technology

Note :

Your mobile phone must support Bluetooth Version 2.1 secure simple pairing.

Your Handsfree Kit incorporates iVOICE SMARTPAIR™ Technology to
simplify the Bluetooth setup process .You do not have to key in the
pincode. All you have to do is use your Bluetooth device to SEARCH

→

SELECT

→

and device will be paried successfully.

iVOICE SMARTPAIR ™ Technology

The iVOICE R1 Handsfree Kit is a revolutionary
Bluetooth hands-free speakerphone for your car, home
or office. Leveraging innovations in our noise, echo and
wind noise cancellation technologies found in iVOICE
Bluetooth Handsfree Kit, the R1 pairs seamlessly to
your Bluetooth enabled phone to transform any
environment into a communication hub.

Designed with the mobile users in mind, the R1 sports
a small form factor design for greater mobility and
convenience. Integrated dual microphones and our
Microphone Space Isolation Technology helps ensure
your communications are delivered as you intended:
clear. With pairing capabilities for up to (8) phones,
the R1 leads the industry in multi-pairing technology.
Screen and answer all your calls with iVOICE Intelligent
Voice Operator™ and hear the number of the caller
announced.

Bluetooth

HandsfreeKit

Do not operate your Handsfree Kit while driving!!

The GG Telecom Assistance Center is ready to assist you.
You can find answers to frequently asked questions,
ask a question using email, receive service over the Internet,
or speak directly with a representative.

Email :sales@ggtelecom2002.com

Getting Assistance

ALSO KNOW AS < R1 / RX-1 / RX-7 / GX-7 / MZ-1 / MX-5 / TX-5 / TX-7 >

For More Info : www.gg2002.com

Back

Select

Scan results

﹝

Look for devices

﹞

﹝

Look for devices

﹞

Bluetooth Link

Back

Select

First Time Pairing / AUTOPAIR ™ Technology

1. Press the MFB II until you hear Handsfree

Kit announces “HELLO”.

Handsfree Kit will automatically go into pairing
mode”.

Blue

and

Red

light will flash alternately.

You will hear the voice prompt announce
“PAIRING CODE 0000”.

Bluetooth

HandsfreeKit

Product Overview

Using It As A Portable Speakerphone.

You can detach the clip and

place it in your shirt pocket.

Use it as a speakerphone

during a conference call.

Using It In The Car.

Attach the clip to Handsfree Kit.

The Handsfree Kit must be placed in such

a way that its buttons are facing the driver.

Volume Up Button

Volume Down Button / (Redial)

Detachable Clip

Speaker

Charging Port

Microphone

MFB II

(On / Off / Pairing / End / Reject)

MFB I
(Answer / Voice Dial)

Before you use the Handsfree Kit for the first time,
charge with the supplied charger for 6 hours
or until the

Red

light diminish.

Before you can use your Handsfree Kit,
you must “pair” it with the device you wish to use.

Turn on the Bluetooth function of your phone.

3-1.

Perform a “Bluetooth device discovery” from your phone.

3-2.

Select your Handsfree Kit from the list of discovered
device.

3-3.

The first time you turn on your Handsfree Kit, it automatically enters
pairing mode for 2 minutes. Once paired successfully,
your Handsfree Kit stays on for instant use.

Pairing

For More Info : www.gg2002.com

Cancel

Enter Bluetooth

Enter Bluetooth
Passkey:

Passkey:

Enter Bluetooth

Enter Bluetooth
Passkey:

Passkey:

0000

What is IsolationMode™ ??

Indicate The Battery Status

IsolationMode™ is suitable for one person
usage. During IsolationMode™, sensitivity
of microphone is redirected to participant
within a 90 degree angle. Voice outside
the 90 degree angle will not be transmitted
over the other end.

Each time you pick up a call, your
Handsfree Kit is in IsolationMode™.

Short press the Volume Up Button and the
Volume Down Button at the same time
when your headset is in standby mode.

Red light flashes 5 time indicates that the
battery is full.

Red light flashes 4 time indicates that the
battery is 80% full.

Red light flashes 3 time indicates that the
battery is 60% full.

Red light flashes 2 time indicates that the
battery is 40% full.

Red light flashes 1 time indicates that the
battery is 20% full.

x 5

x 4

x 3

x 2

x 1

Redial A Call

Long press the Volume down button
when your Handsfree Kit is connected to
your Bluetooth mobile phone.

Increase / Decrease Volume

Press the Volume Up Button /
the Volume Down Button
repeatedly to increase or decrease
volume.

Reset The Device

Resetting the device means that all
the previously paired mobile phones
will be erased.

During standby mode, (

Blue

light

blinking 1 time every 4 seconds),
press all four buttons.

1. Press the MFB I when

Handsfree kit is connected to the
phone.

Say the name of the person that
you wish to call after the”beep”.

Voice Dial

Mute The Microphone

Answer / End A Phone Call

Press the MFB I to answer
incoming calls.
Press the MFB II to end or reject
a call.

When Handsfree Kit is in talking mode,
press the Volume Up Button and
the Volume Down Button together
once to mute the mic, press together
once again to unmute.

Turn On / Turn Off

Press the MFB II until Handsfree
Kit voice prompt “Hello” or “Goodbye”.

Bluetooth

HandsfreeKit

Pairing

Initial Test

Your Handsfree Kit and your device should now be paired and connected,
ready to make and receive calls. To confirm they are successfully paired
and operating properly please try the following.

Press

Send

on your phone to initial the call.

The call will be heard on the Handsfree Kit.

On your phone’s keypad, dial a contact you wish to call.

If the Handsfree Kit does not enter into pairing mode automatically it could already
be paired with another phone and you have to perform a master reset. The Handsfree
Kit can only be paired with one phone at a time.After you have paired the Handsfree
Kit with the phone, it will automatically connect to the phone as soon as it is turned on
and within range.

Once pairing is successful, Handsfree Kit will
voice prompt ”Pairing Successful”.

Enter the Pincode/ Passkey “0000”.

3-4.

Note :

After pairing, some devices will autimatically connect to your Handsfree Kit,
and some will not. You can manually select connection from your mobile phone.

Features

Audio Transfer

If you want to transfer your call to your
mobile phone while speaking on the
Handsfree Kit, tab on the MFB I
and you can continue your conversation
on the mobile phone.

For More Info : www.gg2002.com

360

Bluetooth

HandsfreeKit

The Handsfree Kit supports Multipoint Technology which allows you to use it
simultaneously with two different Bluetooth mobile phones.

Put Handsfree Kit in pairing mode to pair with your aditional Bluetooth devices.

What is MobileConferencing™ ??

Press the MFB I and the MFB II at the same time during a phone
conversation to enter MobileConferencing™ mode.

MobileConferencing™ is suitable for open communication by
all participants in the room.
During MobileConferencing™ , the 2 built in microphone provide
360 coverage for a 15’ x 15’ room.
Therefore, everyone voice will be pick up and transmitted over the other end.
And you can enjoy quality phone call without worrying about echo noises
at the background.

Multipoint Technology

Put Handsfree Kit In Pairing Mode

Method 2

When your Handsfree Kit is not turn on, long press
the MFB II until the

Red

and

Blue

light alternate.

Drop the Bluetooth connection from your
connected devices by pressing the MFB II
and the Volume Down Button at
the same time.

How To Go Into Standby Mode??

1. Turn the Handsfree Kit off and turn it on, the Handsfree Kit will connect to both

of your mobile phones automatically.

2. Establish the Bluetooth connection via your mobile phone.

Please refer to your mobile phone user manual to connect your device.

How To Connect To Two Mobile Phone Simutaneously??

LED Indicator Chart

1. Short pree the MFB I to hold

the first call and switch to the
second call from the other phone.

Long press the MFB I to hang
up the first call and switch to the
second call from the other phone.

How to Answer a Second Call While Talking On The Phone??

Short Press

Long Press

Note 1 :

If you choose not to answer the second call, and you have voice mail on the second phone,
the call will go to voice mail.

Note 2 :

Not all Bluetooth mobile phone support Multipoint Technology.Interoperability between the
Handsfree Kit and all Bluetooth enabled products is not guaranteed.

Note : “Standby Mode”

means Handsfree Kit is on but not connected to any device.

“Connected Mode”

means Handsfree Kit is connected to device but not on a call.

Power on

Power off

Pairing mode

Reset

Standby mode

Connected mode

Talking /IsolationMode™

MobileConferencing™ mode

Status

LED Indication

/4 seconds

Blue

indicator blinks twice

Red

indicator blinks twice

Red

Blue

indicators blink

twice

Red

Blue

indicators

blink by turns

Blue

indicator blinks once

every 4 seconds

Blue

indicator blinks rapidly

2 times every 4 seconds

Blue

indicator blinks rapidly

3 times every 4 seconds

Blue

indicator blinks rapidly

3 times every 4 seconds and

Green

indicator steady on

Outgoing call

Charging

Charging complete

Low Battery

Incoming call

/1 seconds

steady on

off

/1 seconds

Blue

indicator blinks

once every second

Red

Blue

indicators blink

once every second

Red

indicator steady on

Red

indicator off

All

Blue

indication will change

Red

/4 seconds

steady on

Method 1

During standby mode, (

Blue

light blinking 1 time

every 4 seconds) long press the Volume Up Botton
until the

Red

and

Blue

light flash alternatly.

For More Info : www.gg2002.com

Safety Information

Potentially explosive atmospheres

Power supply

Emergency calls

Battery information

GG Telecom Warranty Process

Warranty Terms and Conditions

For safety reason, turn off your electronic device when surrounded by possible explosive atmosphere. It is rare, but
your electronic device could generate sparks which can cause and explosion or fire. Areas with a potentially explosive
atmosphere are often, but not always, clearly marked. Explosive atmosphere may include gas stations, fuel or
chemical storage facilities, and in environment where metal powders, grain are contained in the air.

You should never rely solely upon any electronic device for essential communications (e.g. 911 emergency calls).
Keep in mind that when making or receiving a call, your Handsfree Kit and the electronic device connected to must be
switched on and in a service are a with adequate cellular signal strength. Emergency calls can sometimes be
disturbed on certain cellular phone networks or when certain network services and/or phone features are in use.
Check with your local cellular service provider for more details.

The device complies with Part 15 of he FCC rules. Operation is subject to the following two conditions:
1. This device must accept any interference received, including interference that may cause undesired operation.
2. This device may not cause harmful interference.

- Power supply must be connected to designated power sources as marked on the product.
- The reduce risk of damage to the electronic cord, only remove it by grasping onto the AC adapter rather than the
cord itself from the outlet.
- Make sure the cord is well positioned to avoid potential damage.
- Before attempting to clean the AC power adapter, please unplug the unit from any power source to reduce risk of
electronic shock.
- The AC power adapter is designed for indoor use only, and must not be used outdoors.
-

If the plug will not fit into the outlet, asking help from a qualified electrician. Improper connection can result in risk of

electric shock.

1. Should you be having difficulties in the operation of your Handsfree Kit please refer to the online FAQ and
support documents.
2. Check our website for more information, updated manuals and troubleshooting.

www.gg2002.com

3. Return the unit directly to GG Telecom for testing and replacement of faulty items – Please call or email
to arrange a Return Merchandise Authorization(RMA) number.

1. GG Telecom Warrant the original purchaser of this product only.
2. GG Telecom will replace or repair any faulty product provided it has not been misused or
abused in any way.
3. There are no user serviceable parts inside this product.
Using a nonauthorized repairer will void the warranty service.
4. The Handsfree Kit Warranty is valid for 2 years (24 months) from the date of purchase.
- Proof of purchase must be provided to obtain warranty.
- Handsfree Kit must be in original packing with serial number for warranty to be valid.
5. Warranties are effective from the proof purchase date and not from the date of any subsequent repair of
replacement.

FCC Statement 15.19

The product which produced by GG Telecom has been fully exam and pass quality control.
Sincere guarantees to Guaranty Certificate by this product to be suitable for the following conditions

：

GG Telecom provides 2 year limited warramty for this product commencing from the
date of purchase.
Customers must present the original Warranty Card within product serial number together with
original purchase. Invoice to retailer for verification when warranty service is rendered.
Within the warranty period, GG Telecom will repair or replace the parts that are
damaged under normal circumstance (revalue by GG Telecom) at no additional charge.
Any cost of transportation is on the account of purchaser.
Free guarantee service will not be provided to the side equipment if

：

(a) Any unauthorized repair or modification has been carried out on the unit, or
(b) It has been damaged through misuse,
negligence, accident, insects or natural
calamities, or
(c) It has been installed, maintained or
operated otherwise than in accordance
with the instructions.
Warranty service is valid worldwide.
The Warranty card is only valid through
authorized retailer only.

Dealer :

Model No :

Product Serial Number :

Purchase Date :

(yy)

(mm)

(dd)

Warranty Card

The rechargeable of your Handsfree Kit is not fully charged when it is new. Before your initial use, please charge

your Handsfree Kit for 6 hours first.
-

When the rechargeable battery of your Handsfree Kit is low, there will be a battery low tone and the all blue

indication will change to red.
-

The rechargeable battery of your Handsfree Kit has a long service life if treat ed

properly.

One new battery, or one that has not been used for a long period of time, could have reduced capacity the first few

times it is used.
-

Use your Handsfree Kit in room temperature for maximum battery capacity.

Do not expose your Handsfree Kit in an environment temperature above +55 C (+131 F). IF your Handsfree Kit is

operated in cold temperatures, the battery capacity will be reduced.
-

The battery can only be charged in temperatures between +10 C (+50 F) and +45 C (+113 F).

Safety Information

Bluetooth

HandsfreeKit

Function / Button Matrix

Note :

Your Bluetooth mobile phone must support handsfree profile.

when there is a call or during a call

press

Answer a call /

IsolationMode™

press

Voice dial

(about 3 seconds)

Power on / Power off

press and hold

when there is a incoming call

press

Reject a call

MobileConferencing™

press at the same time

during a phone conversation, change from
IsolationMode™ to MobileConferencing™

when in a call

press

End a call

press and hold

(about 2 seconds)

Last call redial

when power off

Pair

long press

during standby mode

long press

when during a call

press

Volume up / down

during standby mode

double press

Disable / Enable LEDs

press at the same time

during standby mode

Indicate the battery status

press at the same time

during talking mode

Mute / Unmute

the microphone

press at the same time

during standby mode

Reset

Fuction

Button

Disclaimers

This manual is published by iVOICE TECHNOLOGIES.
The information contained in this subject to change without
notice. All rights reserved. The Bluetooth word, mark and
logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by iVOICE TECHNOLOGIES is under license.
Other trademarks and trade names are those of their
respective owners.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or

transmitter.

Ask a Question ?