Full Text Searchable PDF User Manual

User Manual
Product Name: CLEANTYPE® WAVECLASSIC
Model: KSI-B10020,
KSI-B10010
Brand: GETT®
Manufacture: GETT Assembly (Asia) Co., Ltd
.

Table of content
1. What’s in the box ?
2. Keyboard quick reference
3. USB mode for Win / IOS / Andriod
4. Install & handling for this keyboard on window PC
5. Install & handling for this keyboard on IOS / Android
6. General Specification
7. Cleaning instruction
8. Precautions in handling and Use
9. In case of detective batteries
P.1
P.2
P.4
P.5
P.7
P.9
P.10
P.11
P.12

1. What’s in the box ?
i) Bare keyboard
ii) Protective cover
iii) USB cable
iv) User manual
P.1

Fn+F1
Cut
Fn+F2
Copy
Fn+F3
Paste
Fn+F4
Change
Language
Fn+F5
Search
Fn+F6
Backward
Fn+F7
Play/Stop
Fn+F8
Forward
Fn+F9
Mute
Fn + Q
Android Mode
Fn + W
Window Mode
Fn + E
IOS Mode
Fn + C
Bluetooth Pairing
Fn+1
Bluetooth Mode
Fn+2
USB Mode
2. Keyboard quick reference
P.2

Fn+F10/F11
Sound
Adjustment
Fn+F12
Lock Keyboard
P.3
For Technical support please contact us,
E-mail : cs@gett-asia.com

3. USB mode for Win / IOS/ Android
Step 1 : USB-mode is default in
“switch off” position
Step 2 : under”switch off” position,
connect keyboard to a PC, you will
see “red” LED light flash on
Step 2.5) “Red” LED light flash on
Step 3. Press
Fn + 2
together
P.4

4. Install & handling for this Keyboard on Windows PC
Step 1. Before start, you have to
check if your computer installed a
bluetooth receiver. if not, you need
to buy one and install it on your
computer. when your computer
connects the bluetooth successfully,
a bluetooth icon would be shown
on the task bar (as shown)
Step 2. Right-click the Blue tooth
icon, then select “Add Device”
Step 3. After select “Add Device”,
the computer will start to search
this keyboard
P.5

Step 4. Turn on the Keyboard and
hold
FN+1 key for 5 seconds
to
switch on the bluebooth keyboard
mode. Hold
FN+C for another 5
seconds
to activate the Bluetooth
pairing. when the computer search
the Bluetooth keyboard successfully,
Click”next” then.
Step 5. As shown below, a set of
numbers would appear on the
screen, please enter those numbers
and press “ENTER” when finish.
Then , click “Next”
Step 6. You could type with the
bluetooth keyboard after successful
connection.
P.6

P.7
5. Install & handling for this Keyboard on IOS and Android
For IOS
Step 1. Turn on your IOS
system , and go to -> System prefer
-
ences -> Bluetooth.
Step 3. Turn on bluebooth function
Computer will search and show
“KSI-B10020” keyboard.
Double click that to connect
Step 2. Turn on the Keyboard and
hold
FN+1 key for 5 seconds
to
switch on the bluebooth keyboard
mode. Hold
FN+C for another 5
seconds
to activate the Bluetooth
pairing. Hold
FN+E for 5 seconds
to
switch IOS mode
Step 4. As shown below, a set of
numbers would appear on the
screen, please enter those numbers
and press “ENTER” when finish.
Then , click “Next”. It will create
successful connection.

For Android
Step 1. Turn on your
Android system , and go to
-> Settings -> Bluetooth
Turn on the bluetooth function.
Step 2. Turn on the Keyboard and
hold
FN+1 key for 5 seconds
to
switch on the bluebooth keyboard
mode. Hold
FN+C for another 5
seconds
to activate the Bluetooth
pairing. Hold
FN+Q for 5 seconds
to
switch Android mode
Step 3. After turn on bluebooth
function, it will search and show
“KSI-B10020” keyboard.
Double click that to connect
Step 4. As shown below, a set of
numbers would appear on the
screen, please enter those numbers
and press “ENTER” when finish.
Then , click “Next”. It will create
successful connection.
P.8

6. General Specification
Keyboard dimension:
345(L) x 115(W) x 25(T) mm
Operating voltage
+ 5 V
Battery type :
- built-in single 250mA lithium battery
- charging time: 2.5-3 hours (via USB cable)
Protective cover :
GAA-XK16701 can
buy seperately by request. Cover
made of
Latex free
silicon material
weight
- approx 350 gram
Warrantly period
- 2 years
Switching between USB/Bluetooth mode :
- when you
“switch on”
the keyboard, the
default mode will be in Bluebooth. Press
Fn+2 to change to USB-mode. Then press
FN+1 to switch back to Bluetooth-mode.
- when you
“switch off”
the Keyboard, the
default mode will be in USB-mode
.
*Specifications will subject to change without notice,
Please visit www.gett-asia.com for product update.
P.9

7. Cleaning instruction
-
Ensure the port cover is fully enclosed before any cleaning or wet process
to prevent malfunctioning.
- Clean the bare keyboard conveniently by dishwashing, wiping,
brushing, spraying or dipping it in vinegar-based household cleaner.
- Similiar the protective cover can be remove and clean by dishwashing, wiping,
brushing, spraying or dipping it in vinegar-based household cleaner.
- Use only soft bristle brushes or sponges, exert slight pressure only.
- Either wipe with a damp cloth or allow it to air dry.
- When disinfecting, we recommend that you use an alcohol based disinfectant
according to the manufacturer’s specifications.
P.10
DO NOT USE
- White spirit: cellulose thinner: methyl-ethyl-ketone
- Organic solvents such as Loesol
- Inorganic solvents such as Thinning agent
- Object to temperature exceed 55 degree or pressure sterilization
- Scrubbing pads
- Steel wood products or aggressive scouring agents to remove the harden dirt.

**WARNING: USE OF PRODUCTS CONTAINING PETROLEUM AND COMPONENTS
ALIKE IS STRICTLY FORBIDDEN WITH THIS KEYBOARD. SHOULD THERE BE USE
OF THESE HAZARDOUS COMPONENTS, THE MANUFACTURERS WARRANTY WILL
BE VOID. IF YOU ARE UNCERTAIN ABOUT USING YOUR PREFERRED CLEANING
AGENT OR DISINFECTANT, YOU CAN CONTACT US AT cs@gett-asia.com**
8. Precautions in handling and Use
- Do not dry this keyboard with an appliance or heat source such as a
microwave heating , dryers, and radiator.
- Do not dispose of the Keyboard in a fire.
- Avoid leaving keyboard in a car or in other surroundings with high temperature.
- Do not use the keyboard under hot sun.
- Do not use the keyboards in temperature higher than 55 degree.
- Do not disassemble or damage or deform or modify the keyboard.
- Keyboard should not be dropped , thrown , or subjected to other strong impact.
- Prefer to store the keyboard in a dry , cool place.
- Do not use the keyboards with equipment which generates strong
eletromagnetic radiation.
- Do not remove the battery off the keyboard
- Only charge the keyboard with included accessory and cables.
- Do not disassemble or damage or deform or modify the battery.
- The positive and negative terminal of batteries should not be short circuited,
or solder to other objects. if it is short circuited, stop use it any further. P.11

9. In case of defective batteries
- Should fluid leaked from a battery come in contact with skin or clothing, the
affected skin should be washed with water immediately.
- Should fluid enter the eyes,damage may result. the eyes should be washed with
water immediately with follow up medical attention.
- If batteries leak fluid or give off strange smell , they should immediately be
removed from the vicinity of any open flames. Leaking electrolyte may catch fire ,
causing ignition and rupture.
- Damage keyboard , keyboard with abnormalities (for example generation of
heat) or keyboard having been exposed to any siturations named above should
not be use furthermore, independent from the fact if any defect is to been seen.
In such a situation give the keyboard for repairing to the manufacturer.
- If younger children use the keyboard, their guardian should explain the proper
handling method and precaution before using.
- Charge the battery in the keyboard only. Do not charge in temperature lower
than Zero degree or higher than 45 degree.
- Discharge the battery in keyboard only. DO not discharge in temperature lower
than -20 degree or higher than 60 degree.
P.12
-END-

FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
§ 15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning:
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.