PDF User Manual

  1. Home
  2. Manuals
  3. D-Link DSL-G225 Installation Manual

D-Link DSL-G225 Installation Manual

Made by: D-Link
Type: Installation Guide
Category: Network Router
Pages: 1
Size: 3.72 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

01

If you have a 

Fibre-to-the-Home 

service, connect the yellow Ethernet cable to the blue 

WAN port on the back of the router. Connect the other end of the yellow cable to the 

LAN port of the fibre device (ONT).

Skip to Step 4.

Fibre to home 

02

03

If you have a 

DSL 

service, connect the splitter/filter to the port marked “OUT” on the 

power supply.

Out

In

Power Supply

Splitter

Connect the 

grey 

telephone cable to the port marked “IN” on the power supply. 

Connect the other end of the cable to the telephone wall socket.

Telephone Socket

Connect the 

red 

telephone cable to the red DSL port at the back of the router and the 

other end into the red port of the splitter/filter.

You can connect a telephone to the green phone port of the splitter/filter.

04

Router

Power Supply

Power outlet

Router

Splitter

Connect the power connector of the power supply to the power socket at the back of 
the router.

Plug the power supply into the wall outlet. Switch the wall outlet and the router on.

07

05

You can connect a device to your router using either Wi-Fi or the Ethernet cable.

Wi-Fi:

Use the default SSID and password (printed on the bottom of the router) to connect 

your Wi-Fi enabled device to the router.

Ethernet cable:

Connect the yellow RJ-45 Ethernet cable to any yellow LAN port at the back of the 
router and the other end into your PC LAN port. 

06

DSL and FTTH

Launch an Internet browser (Google Chrome, Firefox, Internet Explorer, Safari, etc.) on 

your connected device.

In the URL web address field, enter 

10.0.0.2.

When prompted, enter admin for the 

user name 

and admin as the 

password

.

The installation wizard will start automatically. Please follow the steps of the wizard to 
finish the configuration of the router.

To connect your  LTE/3G USB dongle (optional) for failover mode, simply connect the 
dongle to the USB port at the back of your router.

08

To add additional USB storage (optional), simply insert the device into the USB 

storage port at the back of the router

Installation Overview

IN OUT

Telephone Socket

Fibre to home

Yellow RJ-45 Cable

Your Fax Machine

Your Computer

Your Telephone

Router

Power Supply

Splitter

OR

A setup wizard utility is provided on the router webpage to assist with easy configuration. In the event of a 

problem arising the help screens will suggest the appropriate course of action to resolve the issue.

If the wizard is unable to resolve the issue, please contact either the Telkom DSL or Modem support line.

Please note that the operator will request the outcome of this wizard – Please make sure this has been done 

and have resulting information available. 

TELKOM LINE & ACCOUNT SUPPORT:

10210
Operating Hours:
06:00am - 21:00pm (Mon-Fri)
06:00am - 20:00pm (Weekends)
www.telkom.co.za

MODEM SUPPORT & SETUP:

012 741 2000
Operating hours:
08:00am - 21:00pm (Mon - Sun)
www.d-link.co.za

Product Support and Contact Information

If either of these lights are red please phone Telkom for support

Yellow RJ-45 Cable

Router LAN Ports

Your Computer

Laptops

Mobile Phones & 
Tablets

Fibre to home 

admin

User name:

URL:

10.0.0.2

Password:

admin

For a list of supported USB 

dongles:

http://telkom.d-link.co.za/products/

?pid=3745

USB Dongle

Storage 

(not included)