Full Text Searchable PDF User Manual
Basic User Manual – LYON / C-LYON / ZAFIR
July 2015
ENGLISH
Use of the Control Panel LYON / C-LYON / ZAFIR system
1. WHAT IS A CONTROL PANEL LYON / C_LYON /ZAFIR SYSTEM?
The LYON / C_LYON / ZAFIR system is a FIRE detection system that combined with detectors and
corresponding modules, is capable of quickly detecting the early signs of a fire, issuing a warning of
the event and acting on various elements, such as emergency exit doors, acoustic fire alarms or
crossed outputs.
2. FONT PANEL OF THE SYSTEM
This is what the control panel of the centralised LYON system looks like:
The
keys
enable action to be taken via the control unit, while the
luminous indicators (LEDs)
and
the
screen
provide information about the system status.
3. WHAT HAPPENS IF THE BUZZER SOUNDS?
The buzzer or acoustic warning emits an intermittent alarm if any of the following situations arise:
1. A
fire alarm
has been generated.
2. A relay has been
actuated
.
3. A
fault
has occurred in the detection system.
To stop the buzzer, press this key:
IMPORTANT: THE INCIDENT
must always be
CHECKED
when this key is pressed.
.
4. CHECKING THE INCIDENT
Having stopped the buzzer, the user must check the incident. For this purpose, the control unit
incorporates a screen to display information and various luminous indicators that provide details
regarding the incident that has occurred. The options are: an
ALARM
, an
ACTUATION
or a
FAULT
.
In the event of several types of incident occurring simultaneously, the display can be toggled by
pressing the
ENTER key
. The information displayed on the screen can be expanded using:
370
COFEM,
Ctra. Molins de Rei a Rubí, Km. 8.4
08191 Rubí
08
0370/CPD/0623
EN 54-4
CDFA-01
Equipo de suministro de alimentación para
sistemas de detección y alarma de incendios en
edificios
Otros datos técnicos:
Véase documento “Manual Lyon”
guardado por el fabricante
Power supply equipment for fire detection and
fire alarm systems for buildings
Other technical data:
See “
Manual”
held by the manufacturer
Lyon
Basic User Manual – LYON / C-LYON / ZAFIR
July 2015
If the incident in question is an
ALARM
, the user must verify whether it is real. If so, the order to
evacuate can be given. Beforehand,
the keypad must be enabled
and also if any of the keys on the
control panel are pressed, except for the
buzzer
(the control panel requests a code to be entered):
To enable the keypad, the access code must be entered by using the (
▲▼◄►
)
keys
:
The access code is:
27
(This must be confirmed with the ENTER key).
This operation must be performed each time an access code is requested. Once the code has been
entered, all the keys on the control panel can be used.
5. EVACUATION
This function can be performed once the
keypad
has been
enabled
and by pressing the evacuation
key.
IMPORTANT:
This must be confirmed with the
ENTER
key
This function activates all
sirens
and
switches
in the system. This is also shown by lighting the
luminous indicator.
6. SILENCE SIRENS
When required, this function enables the sirens to be silenced. The
keypad
must be
enabled
and it is
performed by pressing the SILENCE SOUNDERS key
:
IMPORTANT:
while the luminous indicator is lit, the
system’s sirens will
NEVER
be activated.
7. RESET EVENTS
In the case of a false alarm, the user must
Reset
the alarm. With the
keypad enabled
, select the
alarm to be reset and press the
reset
key:
IMPORTANT:
when an alarm is reset, this must be
confirmed with the
ENTER
key
If the incident is a
FAULT
, this must also be
Reset
following the exact same process as explained
above. If the
FAULT
reoccurs, contact the technical service.
DISCONNECT the 110~230V POWER supply and the BATTERIES
before accessing the interior of the control unit.
NOTE:
COFEM S.A. reserves the right to make changes due to typographical errors, inaccuracies in the current information or program
and/or equipment improvements at any time and without prior notice.
.