PDF User Manual

  1. Home
  2. Manuals
  3. Coby KTF-DVD 1093 User Manual

Coby KTF-DVD 1093 User Manual

KTFDVD7093 - LCD TV With DVD/CD Player KTF-DVD 7093

Made by: Coby
Type: User Manual
Category: TV
Pages: 14
Size: 0.79 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Please read this manual  before connection and use.

••

Widescreen Kichen LCD ATSC/NTSC TV with  
DVD Player and AM/TM Tuner 

KTF-DVD 1093 
KTF-DVD 7093 

CAUTION: Use of controls or adjustments or performance of procedures other than those specified 
herein may result in hazardous radiation exposure.

Please carefully study this manual and always keep it available. There are, however, some installation and 

operation precautions which you should be aware of .

Important Safety Instruction

(1) Read these instructions-All the safety and operating instructions should be read before the product is 

operated.

(2) Keep these instructions-The safety and operating instructions should be retained for future reference.

(3) Heed all warnings-All warnings on the product and in the operating instructions should be adhered to.

(4) Follow all instructions-All operating and use instructions should be followed.

(5) Do not use this apparatus near water-The apparatus shall not be exposed to dripping or splashing and 

that  no objects filled with liquids, such as vases, shall be placed on the apparatus.

(6) Clean only with dry cloth-Unplug this product from the wall outlet before cleaning. Do not use liquid  or 

aerosol cleaners. Clean only with dry cloth.

Exception:

A product that is meant for uninterrupted service and that  for some specific reason, such as 

the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged 

by the user for cleaning or any other purpose, may exclude the reference to unplugging the product in the 

cleaning description otherwise required in 131.8(5)

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instruction-Slots 

and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and 

to protect it from overheating, and these openings must not be blocked or covered. The openings should 

never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should 

not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided  or

the manufacturer's instructions have been adhered to .

(11)  Only use attachments/'accessories specified by the manufacturer. Do not use attachments not 

recommended by the product manufacturer as they may cause hazards.

(8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

(9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two 

blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. 

The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, 

consult an electrician for replacement of the obsolete outlet.

(10)  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, 

and the point where they exit from the apparatus. Power-supply cords should be routed so that they are not 

likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords 

at plugs, convenience receptacles, and the point where they exit from the product.

(12)  Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appa-

ratus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from

tip-over.

DVD

Customer Service Hours 

Hours: 800AM-11:00 PM EST, seven days a week. 

E-Mail : techsupport@cobyusa.com 

Phone: 718-416-3197, 800-681-2629, or 800-727-3592 

Web: www.cobyusa.com 

 

 

 


background image

Important Safety Instruction

(13)  Unplug this apparatus during lightning storms or when unused for long periods of time. Unplug it from 

the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to 

lightning and power-line surges.

(14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been 

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate 

normally, or has been dropped.

(15)  Power Sources- This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your product dealer or 

local power company. For products intended to operate from battery power, or other sources, refer to the 

operating instructions.

(16)  Protective Attachment Plug-The product is equipped with an attachment plug having overload 

protection. This is a safety feature. See instruction manual for replacement or resetting of protective device. 

If replacement of the plug is required, be sure the service technician has used a replacement plug specified 

by the manufacturer that has the same overload protection as the original plug.

(17)  Outdoor Antenna Grounding- If an outside antenna or cable system is connected to the product, be 

sure the antenna or cable system is grounded so as to provide some protection against voltage surges and 

built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information with 

regard to proper grounding conductors, location or antenna- discharge unit, connection to grounding 

electrodes, and requirements for the grounding electrode.

(18)  Power lines- An outside antenna system should not be located in the vicinity of overhead power lines 

or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing 

an outside antenna system, extreme care should be taken to keep from touching such power lines or 

circuits as contact with them might be fatal.

(19)  Overloading- Do not overload wall outlets, extension cords, or integral convenience receptacles as 

this can result in a risk of fire or electric shock.

(20)  Object and Liquid Entry- Never push objects of any kind into this product through openings as they 

may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never 

spill liquid of any kind on the product.

(21)  Servicing -Do no attempt to service this product yourself as opening or removing covers may expose 

you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

(22)  Replacement Parts-When replacement parts are required, be sure the service technician has used 

replacement parts specified by the manufacturer or have the same characteristics as the original part. 

Unauthorized substitutions may result in fire, electric, or other hazards.

(23)  Safety Check- Upon completion of any service or repairs to this product, ask the service technician 

to perform safety checks to determine that the product is in proper operating condition.

Continued

. The lightning flash  with arrowhead symbol within an equilateral triangle is intended to alert 

the user to the presence of uninsulated "dangerous voltage" within the product's enclosure 

that may be of sufficient magnitude to constitute risk of electric shock to persons. 

. The exclamation point within an equilateral triangle is intended to alert the user to the 

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the product.

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. 

                       Dangerous high voltage is present inside the enclosure. Do not open the cabinet.

CAUTION:

To prevent electric shock, match wide blade plug to wide slot, and fully insert.

CAUTION:

This Digital Video Disc Player employs a laser System. To prevent direct exposure  to the 

                       laser beam, do not try to open the enclosure. When open and the interlocks are defeated, 

                       visible laser radiation is present.

                       Use of controls or adjustments or performance of procedures other than those specified 

                       herein may result in hazardous radiation exposure. 

DO NOT STARE INTO BEAM.

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device.   Pursuant with 
                            the FCC Rules,Part 15. These limits are designed to provide reasonable protection against harmful interference
                            in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and if not installed and used in 

                            accordance with the instruction may cause harmful interference to radio communication.

CAUTION

RISK OF ELECTRIC SHOCK
           DO NOT OPEN

          WARNING: SHOCK HAZARD-DO NOT OPEN 

AVIS: RISOUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

Safety Precautions

NOTICE:

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual 

 property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended 
 for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering 
 or disassembly is prohibited.

Note

: 1. The batteries should not be exposed to excessive heat such as 

              sunshine, fire or the like. 
          2. The mains plug or an appliance coupler was used as the disconect device, 
              the disconnect device shall remain readily operable and should not be 
              obstructed during intended use.

DVD

 


background image

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS

Page

SAFETY INFORMATION

TABLE OF CONTENTS

.1.

Unpacking

Please make sure the following items are included with your DVD player. If any items are 
missing, contact your dealer.

Main Unit 

Remote Control 

Adapter

RCA Cable 

UNPACKING..............................................................................................................................................................1
NOTE ON DISC.........................................................................................................................................................2

IDENTIFICATION OF CONTROLS.........................................................................................................................3-5
BUTTONS ON THE MAIN UNIT.................................................................................................................................3
REMOTE....................................................................................................................................................................5

CABLE CONNECTIONS............................................................................................................................................6
MOUNTING................................................................................................................................................................7

BASIC OPERATION................................................................................................................................................8-9
TIME...........................................................................................................................................................................8
RADIO........................................................................................................................................................................8
DVD............................................................................................................................................................................8
TV...............................................................................................................................................................................9
AV...............................................................................................................................................................................9

FUNCTION BUTTONS (BUTTONS ON THE REMOTE)....................................................................................10-13
DVD SETUP........................................................................................................................................................14-15
TV FUNCTION....................................................................................................................................................16-17
TROUBLE SHOOTING............................................................................................................................................18
SPECIFICATION.................................................................................................................................................19-20

 


background image

Note on Disc

Care of Disc

Disc Requirements

Video disc contains high-density compressed data that needs proper handling.

Hold the disc with fingers. Hold the disc's outer edge and/or the center spindle hole. 
Do not touch the disc surface.

Do not bend or press the disc. Do not expose the disc to the direct sunlight or heating sources.

Store discs in cabinet vertically, and in dry condition. Prevent exposure to :
    Direct sunlight
    Heat or exhaust from a heating device.
    Extreme humidity.

Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently and radically from center 
toward the outer edge.Do not apply thinner, alcohol , chemical solvent, or sprays when cleaning. Such 
cleaning fluids will permanently damage the disc surface.

In addition, this unit can play back a CD-R, or CD-RW that contains audio titles or MP3 files.

You cannot play discs 

other than those listed above.(CD-ROM, CD-Extra, CD-G, and CD-l discs can not be played on this DVD player.)

The DVD player can play back the following discs.

       Disc mark                          Contents                  Disc size            Maximum playback time

DVD video
discs

Audio+Video

(moving picture)

Audio CDs

Audio

12cm

12cm

133 min (SS-SL)
242 min (SS-DL)
266 min (DS-SL)
484 min (DS-DL)
74min

.2.

DVD

 


background image

Identification of Controls

.4.

Main Unit

enti ication o   ontro s

.3.

Connectors on the unit’s rear panel.

1. STOP
    Under the DVD mode, press to stop playback.
    Under the tuner mode, press to clear the 
    incorrect input when programming channels.
2. PREV
    Press the button briefly to skip backward. 
    Press and hold the button to search fast
    backward.
3. NEXT
    Press the button briefly to skip forward. 
    Press and hold the button to search fast
    forward.
4.PLAY/PAUSE
    Under the DVD mode, press to start/hold playback.
    Under the tuner mode, press to set the band as AM/FM.
5. MODE
    Press to shift modes.
6. DISC TRAY
    Hold the disc.
7. VFD DISPLAY
    Display the working information.
8. REMOTE SENSER
    Sense the remote signal.
9. EXIT
    Press to exit the system menu.
10. TIME
      Repeatedly press the button to show the following
      information.
      Clock- > Week- > Date - > Alarm- > Display Off.
      Please refer to the “Basic Operation” section for 
      details.
11. SET
      Press to set the clock/week/date/alarm.
      Please refer to the “Basic Operation” section for 
      details.
12. TUNING-/LEFT DIRECTION
      Under the tuner mode, press briefly to skip 
      backward.
      Press and hold the button to search fast backward.
      It also works as the left direction button while 
      working with the menu.
13. CHANNEL+/UP DIRECTION
      Under the TV/tuner mode, press to skip channels.
      It also works as the up direction button while 
      working with the menu.

14. TUNING+/RIGHT DIRECTION
      Under the tuner mode, press briefly to skip 
      forward. Press and hold the button to search fast
      forward.
      It also works as the right direction button while 
      working with the menu.
15. TV/SETUP
      Press to display the menu.
16. CHANNEL-/DOWN DIRECTION
      Under the TV/tuner mode, press to skip channels.
      It also works as the down direction button while 
      working with the menu.
17. VOL+
      Press to adjust the volume up.
18. VOL-
      Press to adjust the volume down.
19. OPEN/CLOSE
      Press to open/close the disc tray.
20. POWER
      Press to turn the power on/off.
21. SWIVEL PANEL  
      Present the high resolution picture.
      The panel can be turned by 270 degrees for the 
      different viewing positions. When the panel will not
      be used, just fold up with the LCD side facing inward.
22. FM ANTENNA JACK
      FM antenna connector.
23. AM ANTENNA JACK
      AM antenna connector.
24. AUDIO L
      Audio signal input L.
25. AUDIO R
      Audio signal input R.
26. VIDEO IN
      Video signal input.
27. POWER JACK
      Connect with the power source.
28. TV ANTENNA JACK
      TV antenna connector.
29. OK
      Press to confirm settings.
      It also works as the memory button under the 
      tuner mode.  

 

9

1

20

2

3

4

5

6

7

8

10 11 12 13

22

23

24

25

26

27

28

14

15

19 18 17

16 29

21

DVD

1. STOP 
2. SKIP BACKWARD
3. SKIP FORWARD
4.PLAY/PAUSE
5. MODE
6. DISC TRAY
7. LCD DISPLAY
8. REMOTE SENSER
9. EXIT
10. TIME

11. SET
12. TUNING-/LEFT DIRECTION
13. CHANNEL+/UP DIRECTION
14. TUNING+/RIGHT DIRECTION
15. TV/SETUP
16. CHANNEL-/DOWN DIRECTION
17. VOL+
18. VOL-
19. OPEN/CLOSE
 

20. POWER
21. SWIVEL PANEL
22. FM ANTENNA JACK
23. AM ANTENNA JACK
24. AUDIO L
25. AUDIO R
26. VIDEO IN
27. POWER JACK
28. TV ANTENNA JACK
29. OK  

SWIVEL PANEL
Pivot the screen forward until a comfortable viewing angle is reached. The screen may also be rotated from 
side to side, do not force the screen beyond its rotational limit.
When the screen will not be used, just fold up with the LCD side facing inward.

 


background image

.5.

.6.

Identification of Controls

NEXT
PREV
STEP
SLOW

VOL+
VOL-

CH-LIST
ST/MONO

MUTE

A-B

SUBTITLE

SETUP

TV SETUP

DIRECTION
/OK/TUN/CH

MENU

F.FWD
F.BWD

PLAY/PAUSE

STOP

CLEAR

ZOOM/MEMORY

EPG/FM/AM

AUTO/FAV

KEY PAD

PBC

ANGLE

EXIT
REPEAT

MODE

PROGRAM

DISPLAY

STANDBY

TITLE

GOTO

AUDIO

CR2025

+

+

Remote Control Drawing
Using The Coin Lithium Battery

1. Press to the arrow direction and take out the battery holder.
2. Place the battery onto the holder with the positive side facing up.

3. Push in the holder.

a e  onnections

Cable Connections

External AV Source

Wall Outlet
100-240V~50/60Hz

TV Antenna Connection

Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You 

can use 75 Ohm coaxial cable to connect the outdoor antenna.

Tuner Antenna Connection

Connect the supplied AM/FM antenna to the corresponding antenna slot on the unit’s rear panel.

AV Signal Input

RCA  -  -  Connect the “Video” port to input the video signal by the yellow plug of the RCA cable.

                Connect the “L” “R” port to input the audio signal by the white&red plug of the RCA cable.

Power Connection

Insert one end of the supplied adaptor into the power jack on the unit rear panel and the other end to the wall outlet 

with AC100-240V. 

NOTE

: 1. If the unit will not be used for a long period of time, please disconnect the power and remove the battery from the remote.

            2. Be sure to have all necessary connections properly done before connect the power supply.

NOTE:

 1.   Be sure to have all necessary connections properly 

             

done before connect the power supply.

            2.  When input the AV signal, refer to the manual of the 

              

external sources as well.

DVD

 


background image

DVD

.7.

Mounting

Under-Cabinet Mounting

Mounting Base

>

>

>

>

Min. 2.0 mm
Max. 25.0 mm 

<

<

Choose an appropriate mounting location underneath a cabinet or shelf.
Choose an appropritate mounting location underneath a cabinet or shelf. Close proximity to an electrical
outlet, a TV antenna or cable connection and a telephone jack will facilitate a neat, easy installation. 
Do not mount the product above a range or oven. 
Be sure that the location chosen will provide adequate access to the electrical connection on the rear of 
the unit before continuing.

Under-cabinet Mounting
1. Upon opening the final package, you will find a position reference template that tells the standard      
    position you have to drive through when mounting. Tape the template in place onto the cabinet surface 
    and drill four screw-holes accordingly through the cabinet base.  
2. Position the product and mount it in place using the supplied screws. Do not over tighten.
3. Connect the cables. Route the wires safely away from the heat and moisture sources and secure them  
    in place.

NOTE: 
1. The template is just for the position reference when mounting, please don’t affix it to the mounting 
    surface. 
2. To ensure the product safety, it is recommended that the minimum thickness of your cabinet                   
    base should be 2.0 mm and the maximum thinckness should be 25.0 mm.   
3. Take care when installing it. It may cause damage or serious injury should it fall from its mountings.

 


background image

Basic Operation

.8.

        

Time Button

Repeatedly press the TIME button on the main unit to display the following information.
Clock - - > Week - - > Date - - > Alarm - - > Display Off
Time button functions under any living modes.

Set Clock
Press TIME to display the clock, press SET to access the active time interface.
While setting the clock, press the left/right button to move left/right, press the up/down button to adjust, press OK 
to confirm.

Set Date/Week/Alarm
Repeatedly press TIME on the main unit to display Date/Week/Alarm, press SET to access the active setting interface.
While setting Date/Week/Alarm, press the left/right direction button to move left/right, press the up/down direction button 
to adjust. Press OK to confirm.

Radio Operation

Basic Operation
1. Connect the AM or FM attenna and the power source. Refer to the “Cable Connections” section for details
2. Press MODE to select the tuner mode. Press the FM/AM button to set band.
3. Press TUN+/- briefly to skip forward or backward
    Press and hold TUN+/- to search through the entire band and it will stop at the captured channel or you can briefly 
    press the TUN+/- button to stop searching.
4. Press CH+/- to listen to the preset channel.
    There is no channel preset in the memory location upon the initial use. 
    Refer to “Program Channels” section below for how to program channels.

Program Channels
Manual Program
1. Locate the program you want to save by the TUN+/- button.
2. Press the Memory button on the remote or the OK button on the main unit to save.
3. Press the OK button to confirm. The saved program will be assigned a channel number automatically by the system.
4. To delete the channel, press CH+/- to locate the channel you want to erase, press the Clear button on the remote or the
    STOP button on the main unit to erase. Press OK  to confrim.
Auto Program
Press Auto on the remote to start auto program. The captured channels will be saved automatically into the memory
location overwriting the previous one.

DVD Operation

1. Connect the power source. Press MODE to set the player into the DVD mode.
2. Press Open/Close  to open the disc room. Place a disc onto the holder with the label side facing up,  close
    the disc room.
3. Press PLAY/PAUSE to start playing. Press STOP to stop. Press VOL +/- to adjust the volume.
    Usually a DVD disc contains a root menu. The root menu appears once the data is recognized by the player.
    Press the direction buttons to select a file in the root menu, press PLAY/PAUSE to start playing. 
    Some discs are recorded without the root menu and start playing automatically.
4. Adjust the screen effect through the TFT menu. Press TV-SETUP to display the TFT menu.
    NOTE: 1. The player supports discs as follow:  DVD, CDR, MP3, JPEG.
                2. More DVD functions are listed clearly under the “Function Button” section and the “DVD Setup” section,
                    please read carefully. 

    

Basic Operation

.9.

TV Operation

1. Connect the cables. Press POWER to turn on the player. Refer to the “Cable Connections” section for details.
2. Press MODE to set the unit into the TV mode.
3. Press CH+/- to skip channels. Press VOL+/- to adjust the volume. 
    For the initial use, please scan channels under the “Channel Setup” menu.
    Refer to “Channel Setup” of the TV Function section for details.
4. Various TV features are preset through the TV setup menu, Press TV SETUP to show the TV setup menu. 
    Please read the “TV Function” section carefully.  

AV Operation

The player has the AV input function. You can enjoy programs from the external sources.

1. Connect the AV cable and the power supply.  See “Cable Connections” section.
2. Set the player into the AV mode by the MODE button.
3. Adjust the screen effect through the TFT setting menu. Press TVSETUP to display the TFT menu. 

NOTE: When input the AV signal, please see the user manual of  the external AV signal source as well.
            Be sure to have all necessary connections properly done before connecting the power.

 

DVD

 


background image

nction B ttons

x2           x4          x8          x16         x32

o

a

a se

           Press the Play/Pause button to start/hold playback.

Press STOP once to stop playback by a time point. Press the PLAY button 
to resume playback from where it was stopped. 
Press STOP twice to completely stop the disc. Press the PLAY button 
to start playback from the beginning.

ip  or ar Bac ar  

           Press the button to skip advance the DVD chapter or the CD track.

           Press the button to skip backward the DVD chapter or the CD track.

O

  Player will not skip forward or backward during "WARNING" section of a DVD disc.

            Single chapter DVD or single track CD cannot be skipped.

ast  or ar Bac ar

              Press the button to search fast forward through the disc. Repeatedly press the button to increase the search 

              speed.

              Press the button to search fast backward through the disc. Repeatedly press the button to increase the search 
              speed.
              Press PLAY to resume the normal playback.

NOTE: The player is muted in the fast forward or fast backward mode.

The player will not fast forward or fast backward during  the WARNING section of a DVD disc.

    o

  Standby 

                      Press the Standby button to access/exit the standby mode.

               Press the SLOW button to start the slow motion playback. Repeatedly pressing the button will decrease 
               the slow speed.

 

  TV Setup   
 

Under the TV mode, press  to show the TV menu. 

 

Under the AV/DVD mode, press to show the TFT setup menu.

.10.

NOTE: The player is muted at the SLOW mode.

isp a

isp a

           Press the Display button to show the time and status information.

Function Buttons on the Remote

           Repeatedly press the Display button to quit the display mode.

Play

x1/2           x1/4          x1/8          x1/16             1/32         

Play

top

tan

DVD

                 TFT      SETUP
Picture Mode               Standard
Contrast
Brightness
Sharpness
Tint 
Color

50
50
50
50
50

UP/DOWN         ADJUST   EXIT : EXIT

Press the up/down direction button to select the item.
Press the left/right direction button to adjust.
Press EXIT to exit.

 


background image

nction B ttons

nction B ttons

epeat  ection  B

To repeat a specific section.

Press A-B once to set the starting point A, press A-B twice to set the ending point B.
It starts playing section A-B.
To cancle, press A-B again.
 

NOTE:   Some DVD discs do not allow the A-B function playback. This function does not apply to MP3 discs.

              Press the REPEAT button repeatedly to select the repeat mode.

NOTE:    Some DVD discs do not allow the REPEAT function.

epeat

              Press STEP to start playback frame by frame.
              Press PLAY to quit the STEP mode. 

ti n e

tit e

io

             While playing a DVD disc, press ANGLE to view different camera angles on the disc. 

A DVD disc may contain up to 9 selectable camera angles.

             While playing a DVD disc, press Sub-Title to select the language of the viewable subtitle.

A DVD disc may contain up to 32 selectable subtitles.

n e

tit e

.11.

.12.

             While playing a DVD disc, press AUDIO to select the language of the audio sound track.

A DVD disc may contain up to 8 selectable audio sound tracks.

NOTE:   Some DVD discs do not have multiple ANGLES, SUBTITLES or AUDIO features.

io

irection B tton O

              

While working with the menu, press the direction buttons to move the cursor.

                        Press OK to confirm.
 

CH - Press to skip channels under the TV mode.

 

TUN - Press to tune radio stations under the tuner mode.

eric  e   a

(Random Program access)
                       1). To directly access a DVD Chapter or a CD track.

                       2.) Input data while working with the menu setup or other playback functions.

NOTE:   Some DVD discs do not allow the direct access function.

Memory/Zoom

Zoom
Under the DVD mode, press the button to zoom in/out the picture
Repeatedly press the button to achieve the following zoom effect.

When playing the JPEG disc, press the direction buttons to rotate the picture of normal 100% display 
or press the direction buttons to move position of the enlarged picture.

Memory
Under the tuner mode, press the button to program channels.    

                                

Press Clear to cancel the incorrect input.

en

it e

Under the DVD mode, press the Menu button to show the root menu.

Under the DVD mode, press the Title button to show the title menu.

ear

FM/AM

EPG

AUTO

FAV

Press the MUTE button to muffle sound. Press it again to release.

Memory

Zoom

oto

oto

Go to a desired section. 

Press GOTO to display the search menu.

T

C

DVD

DVD

-- /12

--- /001

0:02:03

Off

1. Press the direction buttons to move left/right.
2. Press the number buttons to input data. 
    To cancel the incorrect input, press the Clear button.
3. Press OK to start searching.
4. Press GOTO to quit.

Disc

2x - - 3x- - 4x- -1/2x - - 1/3x - - 1/4x

Auto/FAV 
                Press to search stations automatically under the tuner mode.
                Press to show the favorite channel list under the TV mode.

AM/FM/EPG 
                Press to select band under the tuner mode.
                Press to show the electronic program guide under the TV mode.

NOTE:    The picture quality decreases as the picture size increases.

 


background image

SETUP

                 Press the SETUP  button to enter the DVD setup menu.

   The SETUP  menu allows the viewer to adjust the setting details of the DVD player

.

                 Please refer to " DVD SETUP " section for further directions.

nction B ttons

Setup

ST/Mono

CH-List

  et p

.13.

.14.

ro ra

DVD

Program Function
 
               Press the "Program" button to access the Program function.

      

ST/Mono 
                Switch between the stereo audio mode and the mono audio mode when there is stereo audio 
                signal detected.

CH-List    
               Press to display the channel list under the TV mode.

DVD Setup
Various features of the DVD player can be adjusted in the SETUP menu.

 

1. Press SETUP to show the setup menu.

2. Press direction buttons to select the options.

3. Press OK to confirm settings.

 

Language Setup

Display Setup

Item

Description

Default Setting

OSD Language

Set the OSD(On-Screen-Display) language

English

Menu

Set the menu language

English

Audio

Set the audio language

English

Subtitle

Set the subtitle language

English

Screen Saver

The screen saver prevents burn-in damage to the player’s screen. 

The default setting is ON.

When the angle mark is set ON, an icon will be displayed on the screen 

if the disc has multiple angle shots available for viewing.

You also can access this function by pressing the ANGLE button on the

remote control.  The default setting is ON.

Item

Description

Default Setting

Aspect Ratio

Set the aspect ratio of the display. 4:3 is used 

with standard television displays; 16:9 is used 

with widescreen television displays.

16:9

TV System

Angle Mark

 

Set the player’s Video Out signal type. Set this 

to correspond with your TV’s Video System type. 

NTSC is the standard used in North America.

NTSC

Language

Display

Audio

Parental

OSD Language

Subtitle

Audio

Menu

 

    

1. Title1-Chapter1

2. Title1-Chapter2

3. Title1-Chapter3

4. Title1-Chapter4

5. Title1-Chapter5

6. Title1-Chapter6

7. Title1-Chapter7

0016/0023

PROG

OK

PLAY

Play

Select

Exit

1. Press the up/down direction button to select the desired file.
    and press OK to save. The chosen file will be displayed to the right screen.
    When programming files, press MENU to access Titles, press OK to access Chapters.
2. To delete the program, press OK at the file to be erased.
    To clear all programs, press the Clear button on the remote.
3. Press Play/Pause to start playback.

 


background image

  et p

.15.

Picture Mode   

Setup the picture mode (Personal, Standard, Soft, Dynamic)

Contrast 

 

Adjust the color contrast   

Brightness 

 

Adjust the display brightness .

Sharpness  

 

Adjust the display sharpness

Tint 

                  

Adjust the image color.    

Color   

 

Adjust the display color.   

  

 

 

 

 

ITEM                   

DESCRIPTION    

Sound Mode 

 

Setup the sound mode. (Standard, Movie, Music, Personal)

Bass   

 

Setup the bass effect.

Treble    

 

Setup the treble effect.

Balance   

 

Adjust the sound balance.

Audio Language  

Setup the audio language.

ITEM                   

DESCRIPTION    

DVD

UP/DOWN         ADJUST   EXIT : EXIT

TV Function

.16 .

.

TV Function

Preparations

1. Connect the antenna and the power supply. Press POWER to turn on the the player. 

    See “ Cable Connections” section.

2. Press MODE to select TV. 

3. Press the CH+/- button to skip channels or press numeric buttons to input the channel directly.

    For the initial use, scan channels under the “Channel Setup” menu.

    See the “Channel Setup” section for details.

Setup Menu

Various features can be preset through the TV setup menu.

TV setup menu consists of Picture Setup, Audio Setup, Time Setup, Option Setup as well as Channel Setup.

1. Press TV-SETUP to display the menu.

2. Press the left/right button to select the menu, press OK to enter the menu.

While working with the menu, 

1. Press the up/down direction button to select the item. 

2. Press the left/right direction button to adjust 

3. Press TV Setup to back up the menu. Press EXIT to exit the menu.

Picture Setup

Audio Setup

Audio Setup

Parental Setup

Item

Description

Default Setting

Channel Output

Sets the audio channel mix mode 

(LT /RT, Stereo).

Stereo

Item

Description

Default Setting

Change

The initial password is 8888.

Enter the old password, the new password, and then the new password 
again to verify 
Restore function will not reset the password. 

DO NOT FORGET 

THE PASSWORD; this password cannot be reset. 

R

Default Reset            Reset the player to the factory default.

ating Level

Sets the maturity rating level of the player. The 
player will not play any discs rated higher than this 
setting.
There are eight rating levels. Level 1 will restrict 
playback to discs suitable for people of all ages. 
Level 8 will allow playback of all discs, including 
those suitable for adults only.

8

Please follow the below steps to change the paretal 
level.
Enter “Rating Level” - - > Press the left/right button 
to set the level - - > Press ENTER to confirm - - > 
Your are required to input the password to enable 
the new setting.

UP/D

UP/D

UP

UP/D

OWN 

OWN 

O

   

    

    

   

ADJU

ADJU

ADJU

DJU

DJU

JU

JU

DJU

JU

JU

U

DJU

JU

JU

U

DJ

U

DJU

J

ST  

ST

ST  

ST  

ST  

ST  

ST  

ST

S

ST

ST

ST

ST  

ST

ST

ST

T

ST

ST  

ST

S

EXI

EXI

EXI

EXI

EXI

E

EXI

EXI

EXI

EXI

X

EXI

EXI

EXI

EXI

EXI

EXI

 EXI

 EXI

EXI

EXI

T : 

T : 

T :

T :

T :

T :

T :

T :

T :

T :

T :

T

T

T

T

T

T

T

T

EXIT

EXIT

EXIT

XIT

EXIT

EXIT

EXIT

EXI

EXIT

EXIT

EXIT

EXIT

EXIT

 

 

 


background image

Time Zone 

 

Select the time zone. 

 

 

 

(Central, Mountain, Pacific, Alaska, Hawaii, Atlantic, Eastern).

Daylight Saving   

Set the time saving function on/off.

Time

ITEM                      DESCRIPTION    

Menu Languag

e  

Setup the menu language.

Color Mode 

 

Setup the color mode. (Normal, Warm, Cool)

Zoom Mode 

 

Adjust the display mode. (Normal, 4:3).

Restore Default         

Restore settings to the factory default.

ITEM                            DESCRIPTION    

Antenna 

 

Setup the antenna type as Air or CATV.

Auto Scan 

 

Search channels automatically. 

 

 

 

Press the right direction button to start searching, press EXIT to quit.

Show/Hide  

 

Skip the unwanted channels. 

 

 

 

Press the up/down direction button to select the channel, press OK to set block.

 

 

 

Press OK again to release.

Favorite  

 

Make the favorite channels collection. 

 

 

 

Press the up/down direction button to select the channel, press OK to set it as

    

 

 

the favorite channel. Press OK again to release.

Channel No  

 

Edit the channel label.

Channel Label    

1. Select “Channel No”, press the left/right direction button to set the channel.

 

 

 

2. Select “Channel Label”, press the right direction button to show the edit 

 

 

     

    menu. In the menu, press the left/right direction button to move left/right, 

                                            Press the up/down direction button to make changes.
 

 

 

3. To clear the label, repeatedly press the up/down direction button to display 

 

 

      

    the blank input. 

 

ITEM                       

DESCRIPTION    

DVD

TV Function

.17 .

Time Setup

Option Setup

Channel Setup

ro

e  ootin

Should your DVD player develop a problem, please check below before requesting service:

 Should the player develop a malfunction, unplug the player for 30 minutes. After
 that, power on the player and the restore function should reset the player.

      Symptom

   Check and Action

No power 

1. Make sure the unit has been powered on manually.

2. Check if the power cord has been properly connected to the power outlet.

3. Make sure the battery pack is fully charged.

Does not play 

  1. No disc, load a disc.
  2. Disc has been loaded upside down. Place the disc with the label side up.
  3. Disc's rating level is higher than the player's setting.
  4. Disc is incorrect type for the player.
  5. Disc is damaged or dirty. Clean the disc or try another one.
  6. Moisture may be condensed inside the player. Remove the disc and leave the unit 
      power on for one or two hours.

No Picture

 1. Check if the system connection is proper and secure.
 2. Check if the connection cables are damaged.
 3. Clean the disc.

Picture noisy/ 
distorted

 1. Disc is damaged or dirty. Clean the disc or try another one.
 2. Reset the color system. 

No sound or sound 
output not complete

 1. Check if the player has been switched on and correctly set.
 2. Check if the system connections are secured.
 3. Press AUDIO button to select other audio tracks of the disc. 
 4. Check if the MUTE function of the TV or amplifier has been activated.
 5. There will be no sound output during REVERSE PLAY/PAUSE/SLOW and 
     SEARCH.

Remote control 
does not work

1. Make sure the unit is turned on. 

.

2. Remove the obstacles between the remote control and the player.
3. Point the remote control towards the remote sensor on the player.
4. Check if the batteries of the remote control have been loaded with correct 
    polarities.
5. Replace the batteries of the remote control.

Malfunction

.18 .

 


background image

DVD

TV system                                              NTSC + ATSC

AC/DC Adapter

AC input                 100-240V 50/60Hz
DC output               (+12V / 2.0 A)
On working             24W (Max)
Speaker                  2x  8     / 3.0 W

Power consumption 

Operating temperature range                 10  c-40  c

Dimension                                               385x280x80  mm

Weight                                                     2235g

Channel Coverage

Antenna Impedance 

 

25 Ohm unbalance 

Tuning System  

 

 

FS with PLL

TFT Panel Characteristic  

 

Active Area 

222.0(W)x132.48(H)

    Size 

 

 10.2”

    Pixel 

Pitch(mm) 

 

0.2775(W)x0.276(H)

    Resolution 

 800RGBX480(H)

DTV Characteristic   

 

DTV System  

ATSC/QAM

    Channel 

Received 

VHF-L ch.2 to B (57~129MHz)

 

 

 

                

       VHF-H ch. C to KK(135~363 MHz)

 

 

                        

 

 

 UHF ch. LL to 69 (369~803 MHz)

VHF-H                     160.00-442.00MHz

VHF-L                       55.25-160.00MHz

UHF                         442.00-801.25MHZ

1093 Specification

Design, specifications and manual are subject to change without prior notice.

TV system                                              NTSC + ATSC

AC/DC Adapter

AC input                 100-240V 50/60Hz
DC output               (+12V / 2.0 A)
On working             24W (Max)
Speaker                  2x  8     / 3.0 W

Power consumption 

Operating temperature range                 10  c-40  c

Dimension                                               385x280x80 mm

Weight                                                     2006 g

Channel Coverage

Antenna Impedance 

 

25 Ohm unbalance 

Tuning System  

 

 

FS with PLL

TFT Panel Characteristic  

 

Active Area 

222.0(W)x132.48(H)

    Size 

 

 7”

    Pixel 

Pitch(mm) 

 

0.2775(W)x0.276(H)

    Resolution 

 480RGBX234(H)

DTV Characteristic   

 

DTV System  

ATSC/QAM

    Channel 

Received 

VHF-L ch.2 to B (57~129MHz)

 

 

 

                

       VHF-H ch. C to KK(135~363 MHz)

 

 

                        

 

 

 UHF ch. LL to 69 (369~803 MHz)

VHF-H                     160.00-442.00MHz

VHF-L                       55.25-160.00MHz

UHF                         442.00-801.25MHZ

7093 Specification

Design, specifications and manual are subject to change without prior notice.

Specification

.19 .

Specification

.19 .

P/N:907-KD10-9302-00R