Coby CT-P8910 Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

CT-P8910

2.4GHz CID Call Waiting

CORDLESS TELEPHONE

with AM/FM Radio

PLEASE READ THIS MANUAL

CAREFULLY BEFORE USE. KEEP

FOR YOUR REFERE CE.

C ID

TA L K

DIR

CH.

N EW C AL L

ABC

DEF

MNO

G HI

TUV

WXYZ

PQ RS

O PER

JKL

DELE TE

IN U SE

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Table Of Contents

Important Safety Instructions

This symbol is to alert you to important operating or servicing instructions that may appear in
the user's manual. Always follow basic safety precautions when using this product to reduce the
risk of injury, fire, or electrical shock.

When using this product, basic safety precautions should always be followed to reduce the risk of fire,
electric shock And injury to persons, including the following:

IF YOUR PROD UCT UTILIZES BATTERIES, THE FOLLOWING AD DITIONAL PRECAUTIONS SHOULD BE
OBSERVED:

SAVE THESE INSTRUCTIONS

1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Use only with class 2 power source DC 9V 500mA.
4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

5. Do not use this product near water; for example, near a bathtub, wash bowl, kitchen sink or laundry tub,

in a

wet basement or near a swimming pool.

6. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to

the product.

7. Slots and openings in the cabinet back or bottom are provided for ventilation. To protect it from overheating,

these openings must not be blocked or covered. The openings should never be blocked by placing the product
on the bed, s ofa, rug, or other similar sur-face. This product should never be placed near or over a radiator or
heat register. This product should not be placed in an enclosed environment unless proper ventilation is
provided.

8. Do not allow anything to rest on the pow er cord. Do not locate this product where the cord will be abused by

animals or persons walking on it.

9. Do not overload wall outlets and extension cords as this can result in risk of fire or electrical shock.
10.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage

points or short out parts that could result in a risk of fire or electrical shock. Never spill liquid of any kind on the
product.

11.To reduce the risk of electrical shock, d o not disassemble this product. Instead take it to a qualified service

person when service or repair work is required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect re-ass embly can cause electrical shock when the appliance is subsequently
used.

12.Unplug all cords and refer servicing to qualified service personnel under the following conditions:

A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions. Adjust only those controls
covered in the operating instructions. Improper adjustment of other controls may result in dam age and require
work by a qualified technician to restore the product to normal operation.

13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of

electric shock from lightning.

14. Do not use a telephone to report a gas leak in the vicinity of the leak.

1. Do not dispose of the battery in a fire. The cells may explode. Check with local codes for possible special

disposal instructions.

2. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or

skin. It may be toxic if swallowed.

3. Exercise care in handling battery in order not to short the battery with conducting materials such as rings,

bracelets, and keys. The battery or conductor may overheat and cause burns.

4 .Do not attempt to rejuvenate the battery identified for use with this product by heating them. Sudden release of

the battery electrolyte may occur causing burns or irritation to eyes or skin.

5. When inserting battery into this product, the proper polarity or direction must be observed.
6. Remove the battery from this product if the product will not be used for a long period of time (s everal months or

more) since during this time the battery could leak in the Product.

7 .Do not store this product, or the battery identified for use with this product, in high temperature areas. Battery

that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from
condensation during storage and defrosting.

Impor tant S afety Instru ctions
FCC R ules
Batte ry Cau tiona ry Inst ructio ns
Parts Check List
Locat ion of Contr ols an d
Indica tions

Choo se a L ocatio n
Telep hone S etup

Basic Oper ation

Settin g

Speed diali ng

HAN DSET
BAS E
LCD Displa y

Conn ecting the b ase
Batte ry Ins tallatio n
The h eadse t Jack
Belt Clip

Maki ng Ca lls
Rece iving C alls
Redi aling
Addi tional O ption s

Chan ging t he Lan guage
Turn ing the First Ring O n or O ff
Setti ng the Time a nd Da te
Setti ng the Area C ode
Adju st the C ontra st
Setti ng the PBX N umbe r
Turn ing PB X Mod e On o r Off
Chan ging t he Pau se Time
Dele ting M essag e Wait ing
Indic ation
Turn ing Au to Ans wer On or Off
Disa bling t he Rin g for
Priva te Cal ls

Stori ng Pho ne Nu mber
Lette r Table
View ing the Phon e Boo k
Maki ng Ca ll from the Ph one B ook
Dele ting a Stored Numb er
Editi ng a S tored N umbe r
Prior ity (VI P) Cal ls
Bloc ked (R EJ) Ca lls

C aller I D

M essag e Wai ting an d Oth er
F eature s
R adio B asic

C are an d Mai ntenan ce
Tr ouble shoot ing
Warran ty
G lossa ry

V iewin g the C aller I D List
C aller ID Dis plays
C aller ID with Call Waiting
S ervic e
D eletin g Call er ID R ecord
To Dele te All Recor ds
R eturn ing Ca ller ID Calls

U se th e Radi o Func tion
B uilt-In AFC
Antenn a
Time Setting
( base LCD D isplay )
U se th e sleep Time r
S etting the A larm Time(AL -1)

W eek D isplay and S etting

S etting the A larm Time(AL -2)

2
3
4
5

6-9
6
7-8
9
10
11- 12
11
11- 12
12
12
13
13
13
13
13
14- 17
15
15
15
15
16
16
16
16

17
17

17
18- 20
18
18
19
19
19
19- 20
20
20

21-23
21
21-22

22
23
23
23
24
25-27
25
25
25
26

26
26
26
27
27
28
29
30
31

PDF created with pdfFactory Pro trial version

www.pdffactory.com

FCC Rules

Batt ery Cautionary Instruct ions

WARNING:

Modifying or tampering with the telephone's internal components can cause a

malfunction and might invalidate the telephone's warranty and void your FCC authorization
to operate it. If the trouble is harming the telephone lines, the telephone company might ask
you to disconnect the telephone until you have resolved the problem.

As it complies with Part 68 of the FCC rules, your unit has been registered with the FCC.
The FCC requires us to provide you with the following information:
1. Connection and use with the nationwide telephone network:

The FCC requires that you connect to a nationwide telephone network through a modular
telephone outlet which is Part 68 compliant.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Check with your local telephone
company.

2. Notification to the telephone company:

FCC rules require that upon request you provide the following information to the phone
company.
A. The line (telephone number) to which you will connect the telephone equipment
B. The Registration Number and Ringer Equivalence Number (REN). These numbers are
found on the back or bottom of your telephone equipment. The REN is useful to determine
the quantity of devices you may connect to your telephone line and still have all of those
devices ring when your telephone number is called. In most, but not all areas, the sum all
RENs should be 5 or less. To determine the number of devices permitted in your area,
contact your local telephone company.

3. Repair instructions:

If it is determined that your telephone equipment is malfunctioning, the FCC requires that it
not be used and be unplugged from the modular outlet until the problem has been
corrected. Repairs to this telephone equipment can be made only by the manufacturer or
its authorized agents, or by others who may be authorized by The FCC. Unauthorized
repairs void registration and warranty.

4. Rights of the telephone company:

If your product is causing harm to the telephone network, the telephone company may
temporarily discontinue your service. If possible, they will notify you in advance. But if
advance notice isn't

practical, you will be notified as soon as possible. You will be given

the opportunity to correct the

problem, and you will be informed of your right to file a

complaint with the FCC. Your telephone company may make changes in its facilities,
equipment, operations or procedures that could affect

the proper functioning of your

telephone equipment. If such changes are planned, you will be notified in advance.

5. This product is compatible with inductively coupled hearing aids.

Note: This applies only if this product is equipped with a corded or cordless handset.

6. Programming/testing emergency numbers:

When programming emergency numbers and/or making test calls to emergency numbers
A. Remain on the line and briefly explain to the dispatcher the reason for the call before

hanging up.

B. Perform such activities in the off-peak hours, such as early morning or late evening.

CAUTION:

Any changes or modifications not expressly approved by Coby Electronics Co.,

Ltd. will void the user's authority to operate this device.

For the cordless handset, use only 3.6V 600mAh Nickel Cadmium (Ni-Cd), cordless
telephone battery pack (included).

Do not dispose of the batteries in a fire. The cells may explode. Check with local codes
for possible special disposal instructions.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.

Exercise care in handling batteries in order not to short the battery with conducting
materials such as rings, bracelets, and keys. The battery or conductor may overheat and
cause burns.

Do not attempt to rejuvenate the batteries identified for use with this product by heating
them. Sudden release of the battery electrolyte may occur causing burns or irritation to
eyes or skin.

When inserting batteries into this product, the proper polarity or direction must be
observed. Reverse insertion of batteries can cause charging, and that may result in
leakage or explosion.

Remove the batteries from this product if the product will not be used for a long period of
time (several months or more) since during this time the battery could leak in the Product.

Do not store this product, or the batteries identified for use with this product, in high
temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of
extending shelf life should be protected from condensation during storage and defrosting.

BATTERIES: CAUTION
To reduce the risk of fire or injury to persons, read and follow these instructions:

Batteries should be stabilized at room temperature prior to use after cold storage.

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Parts Ch eck List

Location of Con trols and Indications

1 .
2 .
3 . Base AC Po wer Adapter
4 . Telep hone Line C ord

Hand set
Base Unit

5. Be lt Clip
6. Us er's M anual
7. Ba ttery P ack

In Use/New Call Message
Waiting LED Indicator

UP /DOWN Button:

In talk mode, press the keys,
that let you scroll through
menus and logs, and adjust
th e ha nds et v ol u me , t o
select the volume level (HI,
MID, LOW).

Caller ID Button:

The key is used to review
Caller ID information stored
in memory.

Edit Button:

It is used to create and
edit phone book entries.

HE ADSE T Jack

MENU Button:

This key is used to access
t h e

p r o g r a m m a b l e

functions of your phone.

Ringer ON/OFF Switch:

Press to answer an Switch
to ON to engage the ringer
on the handset. Set to OFF
to disengage the ringer on
the handset.

EARPIECE

HANDSET

CHANNEL Button:

When pressed the key, will scan
up to 40 channels and select the
clearest one to provide the best
possible reception.

Flash/Edit Button:

T h e k e y i s u s e d t o a c c e s s
telephone company services, like
call Waiting.

Redial Button:

When the phone is idle or
off-hook, press the key to
r e d i al t h e l a s t n u mb e r
dialed. When vi ewing or
editing menus and logs, the
key is used to erase digits
on the display and single or
multiple entries from the
phone book and Caller ID
directories.

LCD Display

TALK Button:

P r e s s

t o

a n s w e r

a n

incoming call or to place a
call.

OPTION Button:

The key is used to change
the 10/11 digit dialing mode
during caller ID call-back.

KE Y PAD

DIR/Save Button:

Use the key to program and
retrieve the numbers in the speed
dial directory. The key is also
used to save numbers into the
phone book and other settings.

The LCD is back lit under the
following conditions:
1. While receiving an incoming
call (during ringing).
2. For 20 seconds , when the
handset is picked up from the
cradle.
3. For 20 seconds , when any
button is pressed in any mode.

The LCD back light goes off

immediately after the handset
is placed on the base.

Button:

If the base is set to pulse
dialing, pressing causes
subsequent digits to be
dialed out using tone until
the line is put back on
hook. Also used to view
the left part of the display
and move the cursor left
when editing.

Used to view the right part of
the display and move the
cursor right when editing.

Button:

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Location of Controls and I ndications

PAGE

S ET

SLE EP

SNOOZE

RADI O

AL-1

AL-2

AL-O FF

WEEK

ALA RM 1 button

Select ala rm .

ALARM 2 butt on

Select a larm .

ALARM OFF button

To stop a larm

R A D I O

B u t to n

Press onc e to tu rn
o n

r a d i o ,

press once aga in
to t urn off radio.

A M/FM switc h

S elect AM ba nd or F M ban d.

V OL co ntrol knob

C ontro l the li stenin g level
o f radio .

TUR NING k nob

Sele cted a station for A M/FM
band .

PAGE Button:

Press t o page the
handset.

U P/DOW N Button:

The key lets you scroll
up/down through the
program ming setting .

SET Button:

I n t o

t h e

s e t t i n g

mode o r confirm the
setting.

SLEEP Button:

S l e e p

m o d e

Button

S N O O Z E / W E E K
B utton :

S nooze mode butto n,
a nd yo u can pres s
th e but ton to chang e
th e dis play b etwee n
w eek a nd ti me, o r
y ou ca n pre ss an d
h old the butto n to s et
th e wee k.

RADIO

BAS E

C harge Term inals

DAYS

RAD IO

BUZ ZER
SLE EP

Location of Controls and Indications

Pow er-In Conn ection Jack

Tone/Pulse Selec t Switch

Te lepho ne Lin e Con necti on Jac k

Base LCD Display

Icon : Ind ica tor the

cu rren t time is in PM
m o d e. W he n th e time
i s i n i n AM mo d e, this
a rea will no t dis pla y
a ny ic on.

T im e/We ek dis pla y area

B ACKGROUN D
LED:

It will li ght for 10
s e c o n d s

w h e n

a ny key on the
base is pressed.

Num ber of days

Indic ator 7 days
or 5 days o r 2 day s.

RAD IO Ico n

Alar m 1 & 2 icon

Slee p icon

Buzz er ico n

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Ch oose a Location

Location of Controls and I ndications

Nam e Cha racter Field
Num ber Fi eld

Date /Time Displ ay

NEW Icon

N EW

Call/ Entry Numb er

Displ ays ca ller's n ame a nd op eratio nal me nus.

The num ber field wil l displa y num bers w hen d ialing, viewin g Cal ler ID,

and w hen v iewing the p hone b o

Sh ows th e date and t ime of Caller ID ca lls or c urrent date & time

when idle.

When in idle mode , the

c all ico n will f lash s lowly w hen a new Caller

ID ca ll has been r eceive d. The numb er of n ew ca ller ID calls i s listed next to the i con.

ok.

Wh en in any of the menu s, a numbe r is l isted h ere, n ext to

the

sign. This n umber indica tes the place in the list, s uch as the 38 th cal ler ID call or

the 7 th sett ing in the me nu.

Wh en vie wing caller I D entr ies, th e

icon indica tes th at the same

Calle r ID n umber has c alled more t han o ne tim e sinc e Call er ID mem ory ha s last

been revie wed. N ext to the

ico n is a counte r that indica tes ho w man y time s that

calle r has c alled s ince t he las t revie w.

The Tota l Call Counter wil l show the total

numbe r of Caller

ID m essag es rec eived, the to tal num ber o f phon e num bers s tored in the phone book,
etc., depen ding o n the menu.

RPT Coun ter

RPT

R PT

Tota l Call C ount er

Name Character Field

Number Field

RPT or

Total Call

Counter

New lcon

or Entry
Number

Date/Time

Dis play

LCD Display(handset)

Where you place the phone affects the reception quality of the handset:

Away from another cordless telephone

Place the base near an AC electrical outlet and near telephone line jack

Place the base away from metal walls and metal file cabinets

The cordless telephone operates at a frequency that may cause interference to

nearby TVs and VCRs; the base phone should not be placed near, or on top of a TV or
VCR. If interference is expe-

rienced, moving the cordless telephone farther away from the TV or VCR will often reduce
or eliminate the interference.

CAUTION

: While the 2.4GHz frequency is inherently clearer, we suggest that you do not use this

phone within 20 feet of a working microwave. The microwave produces frequencies in this
range which may cause interference. This interference is normal for all 2.4GHz phones and
should not be considered a product defect.

Note

Do th e foll owin g:

Cho ose t he be st loc ation
Con nect the ph one
Cho ose t he dia ling mode

Away from heat sources, such as

radiators, air ducts, and sunlight

Near a central

location and on a
l e v e l s u r f a c e

Away from a microwave oven

Away from VCRs and TV sets and

o th er el e ct ron i c equ i pme n t

Away from excessive

moisture, extremely low
t e m p e r a t u r e s, d u s t ,

mechanical vibration, or

shock

Away from a personal computer

Away fro m noicse sources such as a

window by a street with heavy traffic

PDF created with pdfFactory Pro trial version

www.pdffactory.com

1. Connect the

telephone

line cord to

the

telephone line connector

jack and to a

telephone outlet.
2. Connect the AC power adapter to the 9V DC jack and to an AC outlet.

: If your telephone outlet is not modular, contact your telephone company for assistance.

Tip

Note:

Use only the supplied AC power adapter. Do not use any other AC power adapter.

Connect the AC power adapter to a continuous power supply. Place the phone close to the
AC outlet so that you can plug in the AC power adapter easily.

AC Adaptor

Telephone line cord

Telephone line
connector jack

Telephone modular
jack

AC Adaptor jack

120V wall outlet

Connecting the Base

Battery Instllation

Telephone Set up

To in stall t he 3.6 V 600m Ah co rdless hand set ba ttery p ack.
1.Sl ide op en the batter y com partme nt doo r on th e bac k of the hand set.
2.Pl ug the batter y conn ector into th e 2-pin conn ector i n the b attery comp artme nt, and

th en ins ert the batter y.

3.Cl ose th e batte ry com partm ent do or.
4.Pl ace th e hand set on the ba se un it crad le.
5.O nece y ou ha ve inst alled t he ba ttery p ack an d plac e the hands et on the ba se you

wi ll

he ar a tone in dicati ng the hand set ha s con necte d with the b ase a nd wil l

su ccess fully ch arge.

Charg e the batte ry pac k for at lea st 12 hours befo re usi ng the

ha ndset the fir st time .

7.Th e

LED o n the base illumin ates w hen t he ha ndset is prop erly m aking

co ntact with th e charge term inals .

A fu lly cha rged b attery lasts f or app roxima tely:

5 hours when y ou us e the h andse t conti nuous ly (talk time) .
5 days w hen th e han dset is not in use (s tandb y).

Th e disp lay wi ll show

If th e batte ry las ts onl y a few minu tes ev en aft er a fu ll char ge, th e usab le life of the

batt ery ha s exp ired a nd n eeds to be replac ed. R eplac ement batte ries c an be
purc hased throu gh mo st loca l elect ronic o utlets .

IM PORTANT:

CHA RGE

Bat tery D uratio n

Whe n the Batte ry Nee ds Ch arging

"LOW BAT TERY" .

Whe n to Purcha se a N ew Ba ttery Pack

·
·

8:02

12 /25

3 9

To Instal l the B attery

Head set Jack

The H eadse t Jack

The h eadse t jack i s loca ted on the sid e of the
hands et an d is a sta ndard 2.5m m plu g.
Simpl y plug a hea dset into th e jack and the
heads et will be act ive.

Note:

When the h eadse t is pl ugged into the

teleph one ,t he mi crophone an d earp iece on
the ha ndset are no t activ e

Head set(included)

Te lepho ne Set up

Be lt-Cli p

Be sure to rem ove th e belt- clip fil ler cap prior
to instal ling B elt-clip . Inst all the belt-c lip as
sh own.
To remo ve the belt-c lip, sq ueeze the re lease
at the to p of th e clip where it att aches to the
ph one, a nd ge ntly P ull the clip u p and out of
th e hand set.

Belt Clip

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Press

Wait u ntil yo u hear a dial tone, and th en pre ss

to re dial th e num ber la st dial ed

(up to 32 dig its).

Ba sic Op eratio n

Setting

Additi onal Opt io ns

Adjust the volume in the earpiece

Switch to temporary to ne dialing

Receive a c all waiting c all

Mute a c all

Do This:

To:

Pick u p the h andse t from the ba se and pres s

Wait u ntil yo u hear a dial tone, and then dial the nu mber you wi sh to d ial.
When you a re fini shed t alking , press the

ke y or p lace t he uni t back into t he

base t o end the call.

Ma king C alls

2.
3.

Re ceivin g Cal ls
Wh en yo u hea r the p hone ring:

If the h andse t is in the ba se, lift the ha ndset from t he bas e. The hand set wil l turn o n.
There is no n eed to push the

key if the unit is on the base when the ca ll comes

in. Thi s auto -answ er feat ure ca n be p rogram med o ff.
If the hands et is off the b ase, y ou wi ll need to pre ss

to answe r the call. The

displa y will s how th e call er ID in forma tion after the first ring.

When you ar e finis hed, p ush

or p lace th e han dset b ack on the ba se.

Press the

key after the phone is in use .The phone will

remain in tone dial ing mode for the duration of the call.

Press

to go to the new caller.

Press

again t o go back to the original caller.

Press the

key.

Press

to contin ue speaking to the caller.

Press

during a call until the desired volume level is reached.

Re dialin g

N ote:

You ca n also press

first to display the numb er and then press

to dial

t he number d isplaye d.

Handset Settings

"ENGLISH"

You can change the setting on the handset in the options menu. Access the options menu by
pressing and holding the

key until

is displayed.

There are 11 settings in the options menu which can be changed. You can scroll through the
option menu in the listed order by pressing the

key. Settings which have a listed

number can be reached directly by pressing that number on the keypad.
To edit most settings, press the

key, use the keys to toggle between the setting options,

and then press

to save changes. You can continue programming options by using the dial

pad keys or

the keys to go to a new setting. Press

to exit the options menu.

Key Function

Language:

First Ring On/Off:

Time Set:

Contrast:

PBX Number:
PBX Mode On/Off:

Pause Time:

MSG Waiting Delete:

Unavailable Ring On/Off:

Private Ring On/Off:

Auto Answer On/Off:

Note:

Change the language that appears on the display. Choose between English,

French, and Spanish.

Turn the first ring of the phone off so that it does not Ring until caller

ID information has been displayed. Particularly useful when using the priority and

blocked call features or the private and unavailable ring settings.

Change the time and date.

Provided to adjust the display background lighter or darker.

Number used to access PBX dialing options. The default setting is "9".

Determines if the " PBX Number" is used before an out-going

number is dialed. When "On",

automatically dials the PBX number

and a pause,

before any speed dial or caller ID callback number. Default setting is "Off".

Allows you to adjust the number of seconds that a pause lasts such as

during programmed pauses in your speed dial numbers or after your PBX number is

dialed.

Clears any current message waiting indication.

Turns on and off the ring for all calls where caller ID

information is unavailable. Please note that the phone will ring once even when set to

"Off" unless First Ring is programmed "Off" as well.

Turns on and off the ring for all calls where the caller has blocked

their caller ID. Please note that the phone will ring once even when set to "Off" unless

first Ring is programmed "Off" as well.

Turns on and off the feature which makes the

phone

automatically go off-hook when the handset is picked up from the base while the phone
is ringing.

At any time during options programming you can quit and the settings that you have

changed will be saved. Press

to quit or let the options programming time out by not

pressing any keys for 20 seconds.

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Changing the Language

ENGLISH

ENGLISH ESPANOL

FRANCAIS

Turning the First Ring On or Off

Setting the Time and Date

1. Press and hold the

key .

2. Press

to go to the language programming option.

3. Press

to change the setting.

will begin flashing.

4. Use the

keys to toggle between

, and

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

You can turn off the first ring of the phone so that it does not ring until caller ID information
has been displayed.
1. Press and hold the

key to enter the menu.

2. Press

to go to the first ring programming option.

3. Press

to change the setting."

" will begin flashing.

4. Use the

keys to toggle between On and Off.

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

1. Press and hold the

key to enter the menu.

2. Press

to go to the time set programming option.

3. Press

to change the setting. The month will begin flashing.

4. Use the dial pad to enter the month in two-digit format. The date will begin flashing.
5. Use the dial pad to enter the date in two-digit format. The hour will begin flashing.
6. Use the dial pad to enter the hour in two-digit format. The minutes will begin flashing.
7. Use the dial pad to enter the minutes in two-digit format.

and

begin flashing.

8. Use the dial pad to choose between

and

, Where

and

When the final setting is programmed, the time and date are automatically saved. A

double beep will sound and you are returned to the options menu.

10. Continue with programming or press

to return to the idle screen.

＂

Adjusting the Contrast

Setting the PBX Number

Turning PBX Mode On or Off

Changing the Pause Time

The contrast is optimized for viewing and will probably not need to be changed from the
default setting. It will adjust the display background lighter or darker.
1. Press and hold the

key to enter the menu .

2. Press

to go to the contrast programming option.

3. Press

to change the setting. "2" will begin flashing.

4. Use the

keys to toggle between the three levels of contrast.

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

1. Press and hold the

key .

2. Press

to go to the PBX number programming option.

3. Press

to change the setting.

4. Use the

keys to customize the digit to match your PBX system.

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

1. Press and hold the

key .

2. Press

to go to the PBX mode programming option.

3. Press

to change the setting.

will flash.

4. Use the

keys to toggle between On and Off.

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

1. Press and hold the

key to enter the menu.

2. Press

to go to the pause time programming option.

3. Press

to change the setting. 2 will begin flashing.

4. Use the

keys to select the desired dialling delay.

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

: The number programmed here is not active unless PBX mode is On.

You do not need PBX mode unless you need to dial A specific single digit number

before each outgoing call.

Note

Note:

＂

Off

Setting

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Sp eed d ialing

Setting

Deleting Message Waiting Indication

DELETE

Disabling the Ring for Unavailable Calls

Disabling the Ring for Private Calls

Note:
Turning Auto Answer On or Off

Clears any current message waiting indication. See pag

or more information about

message waiting.
1. Press and hold the

key to enter the menu.

2. Press

to go to the message waiting programming option.

3. Press

to reset the message waiting indication. "

will begin flashing.

4. Press

to delete the indication. A double beep will sound to confirm.

5. Continue with programming or press

to return to the idle screen.

Turns the ringer on and off for all calls where caller ID information is unavailable.
1. Press and hold the

key to enter the menu.

2. Press

to go to the unavailable ring programming option.

3. Press

to change the setting." n" will begin Flashing.

4. Use the

keys to toggle between On and Off.

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

Turns the ringer on and off for all calls where the caller has blocked their caller ID.
1. Press and hold the

key to enter the menu.

2. Press

to go to the private ring programming option.

3. Press

to change the setting. " n" will flash.

4. Use the

keys to toggle between On and Off.

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

Turn on and off the auto answer feature. When on, the phone will automatically answer an
incoming call if the handset is in the base.
1. Press and hold the

key to enter the menu.

2. Press

to go to the auto answer programming option.

3. Press

to change the setting. " n" will flash.

4. Use the

keys to toggle between On and Off.

5. When the setting you desire is displayed, press

to save the setting. A double beep will

sound to confirm the setting has been saved.

6. Continue with programming or press

to return to the idle screen.

”

＂

The phone will ring once when set to Off

unless First Ring is also set to Off .

The phone will ring once when set to

Off

unless First Ring is also set to

Off

Note:

e 24 f

The CT-P8910 will store up to 20 speed dial numbers in the order that they are programmed.
No duplicate numbers can be stored.

1. With the handset in the idle state, press

2. Press

to create a new phone book entry.

3. Enter the name you wish to store using the dial pad to enter the letters (up to 15 letters).

See the following letter table for how to program the letters using the number pad. To add
a space between words, push

For

dial this sequence:

4. Press

,and dial the number you wish to store (up to 16 digits).

Press

to insert a dialing pause into the number.

5. Press

when finished to store the number to memory.

Storing Phone Numbers

Example:

JOHN SMITH

Letter Table

If there are no memory locations left in the speed dial directory the CT-P8910 will

display

To continue with memory programming, you must delete or edit

existing speed dial numbers.

If you mis-type entering the phone number, you can move through the number and

edit it by pressing and holding the

. To delete a flashing character, press the

Key; to delete a flashing number, press and hold the

key.

Note:

"MEMORY FULL."

Note:

8:02

12/25

6 6 6 44 66

7 7 7 7

4 4 4 8 4 4

s p a c e

T H

Sp ace

(

)

Key

1st

Press

2nd

P res s

3rd

Press

4th

Press

5th

P res s

6th

Press

7th

Press

8t h

Press

18885

8:02

12/25

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Sp eed d ialing

Speed d ialing

Viewing the Phone Book

Making Calls From the Phone Book

Deleting a Stored Number

"ERASE ITEM?"

"ERASED"

Editing a Stored Number

1. Press

to enter the phone book.

2. Press

to locate the number you wish to view.

3. If the name or number is more than 11 characters, press the

and

button to view the rest of the display (as indicated by the

arrows in the top line of the display).

4. Press

to exit the phone book, or let the phone book time out.

1. To make a call from the phone book, press

2. Locate the number you wish to dial using

3. Push

. The display will show the directory Name, and

begin dialing the number.

4. When you are finished with your call, press

, or place the handset back on the base.

1. Press

2. Locate the number you wish to delete using

3. Press

. The display will show

4. Press

to delete the phone book memory. The display will briefly show

and return to the previous phone book entry.

5. When you are finished press

1. Press

2. Locate the number you wish to edit using

Note:

Be sure to check that the line is not in use by another extension.

3. Press

. The entry will display with a flashing prompt over the first character.

4. Move the cursor to the section you wish to edit using the

, And

keys. When

moving through the number field, it will be necessary to press and hold the

and

keys for more than one second until the cursor moves, since just pressing them enters a *

or # into the dialing sequence. Any dial pad key pressed will be inserted in front of the
cursor.

5. To delete a character, press the

key. To delete a number, press and hold the

key

for more than one second until the number is deleted, since if the

key is just pressed,

it inserts a pause in the dialing sequence.

6. When the number is edited as you desire, press

to store the edited entry.

You can assign stored numbers as preferred calls. When an incoming call is matched to a
stored number designated as "VIP", the phone will generate a special ringer sound after the
first ring (caller ID information must be received first).
To mark a phone book entry as preferred:
1. Press

2. Press

to go the desired entry.

3. Press the

button once. The LCD will show the "VIP" icon.

4. Press

to exit the phone book.

If you do not want to have the phone ring when a specific number calls, you can store that
number in the phone book and assigned it as blocked. When an incoming call is matched to
a stored number designated as "REJ", the phone will not ring after the first ring (caller ID
information must be received first).
To mark a phone book entry as blocked:
1. Press

2. Press

to go the entry to be blocked.

3. Press the

button twice. The LCD will show the "REJ" icon.

4. Press

to exit the phone book.

Priority (VIP) Calls

Blocked (REJ) Calls

Note

: priority and Blocked calls will only work if the incoming call's number exactly matches

the one that is stored in memory.

5 12 12ppp4 56

155 55 55 121

888 -555-12 12

0 3

18885

555 555 12 12

88 8- 55 5-12 1 2

8 88-5 55-12 12

888-5 55-12 12

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Caller ID

When You Receive a Call

Note:

Viewing the Caller ID List

RPT

Caller ID Displays

UNAVAILABLE

PRIVATE

1. When the telephone rings, the caller's name and phone

number appears on the display.

2. The new Caller ID record includes the name and number of the caller and the time and

date the record is received. The New Call light will flash to indicate that you have a new
Caller ID call stored in memory.

When the Caller ID information is received, it is stored in memory so that this

information can be recalled for later use. Up to 40 Caller ID calls can be stored.

This phone automatically stores the last 40 calls received. If a call is received from the same
number more than once since the records were last viewed, no new entry is made, but the
repeat call icon ( "

" ) and the number of repeat calls is displayed.

1. With the handset idle press

2. Any unviewed (new) calls will be displayed first. The most recent call will

be displayed. The information on the call will be displayed with the name,
number, date, and time that the call was received.

3. If the name or number is more than 11 characters, press the

And

button to view

the rest of the display.

4. To scroll to the next call, press

.The

will go through the calls from the last call

received to the first. The

will allow you to view the calls from the first call received to

the last.

5. Press

to finish.

Display shows name and number, time and date of the call.

Display shows number-only service.

" will be displayed when Caller ID information is not available.

This call was made from a telephone company that does not offer Caller ID
services (including international calls).

" will be shown when a call is received from a blocked number. For

privacy reasons, some states allow callers the option to prevent their telephone
data from being displayed on the other party's Caller ID display.

Display shows when the Caller ID information was received incorrectly or only

9:4 5

10 /11

55 5-55 5-12 12

9:4 5 10 /11

55 5-555- 12 12

9:12

12/2 5

2 8

888-555-12 12

1 1:33

12/25

- - - - - - - - - - - -

10 :34

12/ 25

- - - - - - - - - - - -

9:0 7

12/ 25

Caller ID allows the caller's name and phone number to be shown on the display before you
answer the call. In order to use this feature you must first subscribe to Caller ID service with
your telephone company.

Note:

Caller ID with Call Waiting Service

"L2"

Storing Caller ID Records

When numbers are stored into the phone book, a 1 is inserted in front of the number.

If you must dial a 10-digit number for local calls, you must edit the number To exclude that
digit to dial out correctly.

When an error is received, none of the data from this call is saved in

memory.

Display shows when a voice mail message has been received and is stored by
message waiting service provided by the phone company.

Display shows when the incoming call is a priority call.

This is displayed when

is pressed and there is no caller ID data stored.

In order to use the "Call Waiting Caller ID" service you must subscribe to a telephone
company that offers Caller ID service combined with "call waiting" service.
When a new call comes in while you are talking, you will hear a
Notification beep from the handset and the volume is momentarily muted.
The new caller's name and phone number, if available, appears on the
display. Once flash has been pressed, an

in the lower right hand

corner indicates the call waiting caller ID caller so you can keep track
Of who you are talking to.
1. When you receive a "call waiting" call and you want to connect the call, press

. The

active call will be placed on hold and the new call will be active.

2. Press

to alternate between calls.

3. Press

to end the call or place the handset back on the base.

1. Press

2. Use

to scroll to the call record you wish to store into the phone book.

3. Press

4. If you wish to edit the newly stored number, edit it in the phone book .
5. Press

to exit the Caller ID log.

" "

Note:

8: 02

12/ 25

3 9

8: 02

1 2/ 25

888-555-12 12

9:0 7

12/ 25

9:16

12/ 15

9:4 5 10 /1 1

55 5-555-12 12

0 2

1 3

l 2

555 -555-12 12

PDF created with pdfFactory Pro trial version

www.pdffactory.com

When viewing the Caller ID information you can delete a single call record or all the call
records.

1. Press

2. Use

to scroll to the call record you wish to delete.

3. Press

4. To delete the record press

5. Press

to exit the Caller ID log.

1. Press

2. Press and hold

. The display will show

3. To delete all the Caller ID records press

You can return calls by using the Caller ID callback feature.
1. Press

2. Use the

to scroll to the call record you wish to call back.

3. If the number displayed is not correct (needing 10,11 digits), use the

key to

toggle the number to display the correct number of digits to be dialed.

4. Press

to dial out the displayed number.

5. Press

to cancel dialing.

6. To end the call, press

or place the handset back in the base.

To Delete a Single Record

To Delete All Records

"ERASE

ALL?"

Returning Caller ID Calls

9:4 5 10 /11

555-55 5-12 12

10 :00 12/25

555-12 12

Deleting Caller ID Records

Caller ID

M essage Wa iting a nd Ot her Fe ature s

10 :0 5 12 / 25

55 5-12 12

10 :0 5 12 /25

55 5-12 12

9:4 5 10 /11

55 5-55 5-12 12

9:45 10 /11

55 5-55 5-12 12

9:4 5 10 /11

555-55 5-1 2 12

8:02 12/25

1555 555 12 12

Press

If you subscribe to voice mail from the telephone company and if there are voice messages

that have been left in your voice mailbox, the display will show

(see

note below).

If you wish to delete the "Message Waiting" message, delete it as described in the

handset settings section Deleting the Message Waiting Indication (see page 17).

When you receive a Caller ID message, voice mail message, or when the

phone is ringing, the New Call light will flash accordingly.

For Caller ID, the New Call light will flash to indicate that you have a new Caller ID call

stored in memory.

When you have a voice message waiting the New Call light will also flash.

1. Press

on the base.

2. Place the handset back into the base or press the

key on the handset to stop the

page/find feature.

If you venture too far from the base, the handset will beep and the

display will show "

Reverse your direction to re-establish connection with the

base or the call will be dropped. When the base detects that the handset has been out of
range for 20 continuous seconds it will release the engaged line. If you try to access the line
when the handset is out of range of the base, the display will show

If you are experiencing interference during a telephone call, press

the

key. The CT-P8910 will scan up to 40 channels and select the clearest one to

provide the best possible reception. If the current channel is the clearest available channel, it
will keep you on that channel.

Note:

MSG WAITING

Tip:

New Call Light :

Using the Handset Finder (PAGE)

Out-of-Range Warning:

OUT RANGE"

"TRY AGAIN"

Channel Changing:

This function requires voice mail subscription from the local telephone company.

Furthermore, the local phone company must provide a type of voice mail signaling called

FSK (Frequency Shift Key) Not all telephone companies have the visual message waiting

feature available. Please contact your local telephone company to check if this is available in
your area.



”

8:02

12/25

If the

hands et is within

range,it will

beep

for 20

seconds.

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Radio Basic

P ress a nd rel ease t he

bu tton to turn t he rad io on.

S lide th e

sw itch (l ocated on th e right side o f the u nit) to desire d broa dcast

b and.

Turn th e

kn ob to select a stati on.

A djust the

contr ol to th e desi red lis tening level.

To turn the ra dio off , press and re lease

RA DIO

AM/ FM

TUN ING

VO LUME

RADI O.

Th e built -in Au tomati c Freq uency Contr ol (AF C) wo rks on ly on F M. It h elps k eep th e
rad io loc ked in on the FM st ation t o whic h it is t uned.
Wh en tu ning in FM s tations , you may n otice t hat oft en the statio n you desire can b e
he ard on two o r three nearby poi nts on the di al. Alw ays tu ne ca refully to the loude st
an d clea rest po int.

BUILT-IN A FC

AM Ante nna

FM Ante nna

- A built-in ferr ite rod anten na elim inate s the n eed o f an ou tside antenn a

for AM recepti on. R otating the u nit sl ightly may i mprov e rece ption of dis tant A M
sta tions.

- The p ower c ord a cts as your FM an tenna. The power cord p icks u p

mo derat e to st rong s tations and e limina tes th e need for a n exte rnal an tenna in mo st
str ong si gnal a reas. Be sur e the power cord i s stret ched o ut to i ts full length . Do n ot
co il or b unch t he cor d toge ther. Chang ing po sition of the powe r cord may improv e
rec eption .

ANTE NNA

NO TE:

W hen the ba se unit is in RADI O mod e, the LCD in the base will s how th e

RA DIO i con. A nd if y ou pla cing a call o r the phone recei ving a call (p hone ringin g)
wh en the base unit i s in R ADIO mode, the v olume of rad io will decre ase s lowly t ill
sh ut off a utoma tically. And t he vol ume o f radio will in crease slow ly auto matica lly aft er
yo u end the cal l.

USE T HE R ADIO FUNC TION

Pre ss th e

key to turn the fixed t ime w ake fu nction on o r off, and w hen th e

fun ction i s avai lable, the LC D will display the ic on

AL-1

TIME SETT ING(b ase LC D dis play)

When the p hone b ase is in tim e disp lay mo de, pr ess an d hold the S ET key in ba se
for 3 second s, the LCD w ill dis play th e seco nd an d flash .
Press the

key to chang e the s econd to 0.

Press the SET key, then the m inute s tart to flash.
Use t he
Press the SET key to co nfirm, then th e hou r start to flas h.
Use t he
Press the SET to c onfirm and e xit the time setting mode .

▲

o r

ke y to c hange the minute.

o r

ke y to c hange the ho ur.

▼

2.
3.
4.
5.
6.
7.

NOT E:

If y ou don 't pre ss any key in 10 se conds , the s ystem will e xit the time s etting

mod e auto matica lly.

USING THE SLEEP TIMER

Yo u can u se the sleep timer to turn the r adio o ff for a desire d amo unt of time, in step s
of 1 0minu tes up to 90 minut es and then shut o ff auto matica lly. Th e defa ult sle ep tim e
is 9 0 min utes.

Pre ss and release the SLEEP but ton to scroll through the sleep times among 90-
80- 70-60 -50-40 -30-20 -10-O FF.

Wh en the desired slee p time is dis playe d. The radio will cu t off a utoma tically after
a p eriod t ime as you s etting.
To review the current sleep t imer s etting, press and release SLEE P.

To cancel the sl eep timer, pr ess RADIO k ey. Th e radio turns off au tomati cally.

SETT ING ALARM (AL-1) TIME

Yo u can s et the wake time b y pres s and h old th e AL-1 key fo r at le ast 1 s econd .

Pres s and hold th e AL- 1 key to ente r the w ake t ime se tting m ode, then th e min ute
start flash.
Use the

Use the

▲

key to enter the minute, then p ress t he AL- 1 to co nfirm, then the

hour will st art to f lash.

key to enter the hour, the n pres s the A L-1 to confi rm, the 7 or 5 or

2(day) star t flash.

key to selec t the a vailab ility da ys am ong 7, 5 and 2 , th en pre ss

the A L-1 ke y to co nfirm, then the BUZZER or RADIO icon start to fla sh.
Use the

key to select the a larm t ype(R ADIO or BUZ ZER), then press the

AL-1 to con firm t he set ting an d exit the wa ke time setting mode.

▼

PDF created with pdfFactory Pro trial version

www.pdffactory.com

WEEK DISPLAY AND SE TTING

Wh en the base u nit is in time displa y mod e, pre ss the

b utton for les s

than 1 se conds to cha nge t he dis play b etwee n wee k and time. Press and h old the

butto n to e nter the week set ting m ode. W hen y ou en ter the week

sett ing mo de, th e curr ent we ek will flashe s on th e LCD , use the

SNOO ZE/W EEK

SNO OZE/ WEEK

▲

k ey to c hange

the week.

▼

NO TE:

When th e curre nt tim e is th e time you h ave se t in the alarm time settin g mode

and the yo u set the ala rm ty pe is S OUND , the b eep t one wi ll soun d for 1 minu te, and
the

ic on wi ll flash . You c an cut off the beep sound by pr ess the

ke y.

AL-O FF

SNOOZE FUN CTION

Afte r the w ake or alarm mode has a ctivat ed, yo u can s ilence it for anoth er 9 m inutes
by p ressin g the

but ton. You can use t he SN OOZE featu re rep eatedl y. The

alarm will remain on for 60 mi nutes if

is not p ressed .

S NOO ZE

SNO OZE

You r CT-P 8910 teleph one ha s been desig ned to give y ears o f trou ble-fre e serv ice. It
is a sensit ive ele ctroni c instr ument . To as sure it s long evity, p lease read t he foll owing
mai ntenan ce ins tructio ns.
1.K eep th e CT-P 8910 away f rom he at as high te mpera tures can sh orten the life of the

el ectrica l com ponen ts and distor t or me lt its p lastic p arts.

2.T he CT- P8910 shou ld be k ept fre e of du st and moist ure. If it gets wet, w ipe it dry

im media tely. L iquids can c ontain minerals tha t can c orrod e elect ronic c ircuits .

3.H andle your C T-P89 10gen tly and caref ully. D roppin g it ca n caus e serio us da mage

to circui try, or the pla stic ca se, w hich m ay res ult in m alfunction.

4.D o not u se any type of che mical o r any abrasi ve pow der to clean the ca binet. Use

on ly mil d dete rgents on a s oft, da mp clo th to c lean the CT- P8910 telep hone.

5.T he CT- P8910 has b uilt-in surge p rotec tion ci rcuits t hat me et or e xceed FCC

re quirem ents. Howe ver, an incide nt suc h as a lightn ing str ike at or nea r the
te lephon e line s, cou ld cau se seri ous da mage .

6.If the CT-P891 0is ins talled in an a rea w ith freq uent o r seve re ele ctrical storm s, it is

su ggest ed tha t the te lepho ne be discon necte d durin g thes e stor ms or t hat
ad dition al surg e sup pressi on equ ipmen t be a dded to the in stalla tion.

7.In the ca se of trouble with t he tele phone , do n ot atte mpt to repair the te lepho ne

yo urself . It is t he res ponsib ility of users requir ing se rvice t o repo rt the n eed fo r
se rvice to our Servic e Dep artmen t. The y will m ake t he nec essary arran geme nts for
re pair o r repla cemen t.

8.If you sh ould h ave an y que stions about the op eratio n of yo ur CT- P8910 telep hone,

yo u may conta ct CO BY EL ECTRO NICS COR P. cust omer s ervice dept. for tec hnica l
as sistan ce

Care and M ainten ance

Radio Basic

Press the

key to turn the fixed time wake function on or off, and when the

function is available, the LCD will displ ay the icon

AL-2

SET TING ALAR M(AL- 2) TIM E

You can set th e wake time by press and hold the AL-1 key for at least 1 second.

Pr ess an d hold the A L-2 ke y to en ter th e wake time setting mode , then the m inute
st art flas h.
Us e the

Us e the

▲

key to ent er the minut e, then pres s the A L-2 to confir m, the n the

ho ur will start t o flash .

key to ente r the hour, t hen press th e AL-2 to con firm, the 7 o r 5 or

2( day) s tart fla sh.

key to sel ect the avail ability days among 7, 5 a nd 2 , then press

th e AL-2 key to confir m, the n the B UZZE R or R ADIO icon s tart to flash.
Us e the

key to sel ect the alarm type( RADIO or BUZZER ), the n pres s the

AL -2 to c onfirm the s etting and e xit the wake t ime se tting m ode.

▼

NOTE :

Whe n the c urren t time is the time yo u hav e set i n the w ake ti me se tting m ode,

and y ou set the a larm t ype is SOUN D, the radio will t urn on autom atica lly, you can
turn o ff the r adio b y pres s the

key o r don' t press any k ey in 6 0 minu tes.

A L-OF F

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Troubleshooting

No dial tone/phone w ill no t dial out.

Ca n't he ar the ring s ignal.

Wh ile on a cal l, you hear a nothe r call on the line o r expe rienc e radi o frequency

i nterfe rence .

Th e call er's na me an d/or p hone numb er doe s not appea r on the dis play.

·
·
·

＂

C heck that th e AC p ower adapte r is plugged into a workin g AC p ower outlet.
C heck all tele phone cord conne ctions or try anothe r wall jack.
D o a basic re set of the ph one: D isconn ect th e phon e from the w all and remo ve the

b attery. Leav e for 3 0 minu tes an d then re-ins tall as instru cted b y the m anua l.

C heck the rin ger vo lume c ontro ls; at th e low est lev el the ring may not be hea rd.

S witch chann els to a clea r chan nel.
C heck the wi ring fo r bad c onnec tions.
D o not use th is pho ne within 20 feet of a wor king m icrowa ve. Th e microwave

p roduc es frequencies in t his ran ge wh ich ma y caus e inte rferen ce. Th is inter ferenc e
i s norm al for

all 2. 4GHz phone s and should not be cons idered a product de fect.

M ake s ure yo u have subs cribed to Caller ID servic e from your local te lephon e

c ompa ny and that s ervice has b een ac tivated.

C aller ID service m ay not work w hen the pho ne is c onnec ted to a Priv ate Bra nch

E xchan ge(PB X).

T he ca ller ha s requ ested that th eir pho ne nu mber b e sup presse d from Calle r ID

s ervice , or c aller ID servi ce is n ot ava ilable in their area.

Priv ate

o r

U navailable

will

appear on t he disp lay.

You an swere d the c all bef ore Ca ller ID data was di splaye d, whi ch usu ally oc curs

a fter th e first ring.

Ne w Cal l/Mess age Waiting Indic ator d oesn' t work prop erly.

Ca n't rec eive o r mak e pho ne ca lls.

M ake s ure yo u have subs cribed to voi ce mai l comp atible with "F SK" t ype sig naling

(ch eck w ith you r loca l phon e comp any). Verify that b oth the "On" and "O ff" sig nals are

ac tivated . If yo ur voic e mail produ ct from the lo cal ph one co mpan y does not s upport
"FSK" sig naling , you may u se this featur e as a New C all Ind icator only.

C heck if the p hone is set t o the c orrect type o f serv ice, ei ther To ne of Pulse.

Warran ty

FULL 90 DAYS LIM ITED WAR RANTY

COBY ELECTRO NICS CORP.

C ustomer Ser vice D ept.

56-65 Rus t Stree t

Maspeth, N .Y. 11378

C OBY ELEC TRON ICS CORP. ( COBY) warrants this pro duct to the original
purchaser to

be free from defects in material or workm anship under normal use for

90 DAYS from the

date of original pu rchase. CO BY agrees at our option under this

w arranty, to repair or replace it with a new or reconditio ned pr oduct at no additio nal
charge. Our w arranty , of course, does not cover any product w hich h as bee n subject
to neglect, unreas onable use, accide nt, violation of operating instruction s, or any
product that h as been repaired o r modified by an unauthorized service agent
.

To obtain factory service, return this unit fre ight-prepaid to the address shown below
w ithin the duration of this warranty. En close $6.00 for ea ch item in the form of money
order made payable to COBY EL ECTR ONIC S COR P. to c over the cost of postage and
handling. Also, include a c opy of the sales re ceipt to show the proof of purchase an d a
detailed description of the probl em. Th e unit(s) must be p ackaged in such a way a s to
reasonably protect it from possible sh ipping dam age. For further information, em ail
customerservice@cobyusa.com or write to :

C oby's liabil ity und er any legal theory for any loss or damage in any way related to
this pro duct s hall in no event exceed the sal es pric e of th is product. In no event shall
C OBY be lia ble for any incidental or consequential damages resulti ng from the use
of, or inability to use thi s product. R epair or replacement as prov ided u nder this
w arranty is th e excl usive remedy of the consumer.

Except to the extent prohibited by law, no express or implied warranty of
mercha ntability

or fitness for a particular purpose on this product shall not extend

beyond the period o f this warran ty. Some sta tes pr ohibit the exclusion or limitation of
incidental or consequenti al damages, so tha t the above limitations or exclu sion m ay
not apply to you. This warranty g ives y ou spe cific rights, and you may also have other
rights w hich m ay va ry from state to state.

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Glossary

PBX(Privat e Branch E xchange) - A small, c entral, privately owned, switching telephone
system where a digit (like

) m ust be dialed first in order to access an outside line

“ ”

Calendar/Clock - Vis ual display of date, day and time.

Caller ID Log - Stores up to 40 Caller ID entries.

Data/FAX Port - Allows connection of a PC or FA X machine directly i nto the phone versus
a wall outlet.

Dial from Display - One-but ton dialing from the Caller ID log.

Display - T he Liquid Crystal Display (LCD) shows clock and calendar, num ber dialed, low
battery indicator, Caller ID information and call timer.

Flash - A signal sent by the phone to the local telephone company supporting services
such as call waiting.

Message Waiting Indicator - A visual indicator that there are new message in your voice
mail box. Requires FSK signali ng by phone company. Contact your local telephone
company to subscribe to Voice Mail Servic e.

New Calls Indicator - A visual indicator that new call s have been received.

Caller ID - Enables users to view name and number of callers. Contact your local
telephone company t o subscribe to Caller ID Service.

Call Timer - Allows timing of phone conversations .

Redial - Performs single button dialing of last number dialed.

Ringer Lev el Control - Permits adjustment of the ringer volume level.

Speed Dialing - Allows programming of frequently dialed numbers so that they can be
dialed with the two touch speed dial button(20 entries).

Tone/Puls e Option - Enables you to switch from pulse (rotary) t o tone dial ing

Useful Features and Terms

Volume Level Control - Permits volume adjustment of the handset and headset during a
conversation.

FSK type Signaling - A signal used to turn on and off the message waiting indicator, can
be sent by the telephone company with a r inging signal or without.

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Ask a Question ?