PDF User Manual

  1. Home
  2. Manuals
  3. Coby CSMP95 Owner's Manual

Coby CSMP95 Owner's Manual

Made by: Coby
Type: Owner's Manual
Category: Speaker System
Pages: 16
Size: 0.44 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Read this manual carefully to get the best performance from 2.1 System

2.4GHz DIGITAL WIRELESS SOUNDBAR SYSTEM

CSMP95

OWNER`S MANUAL

 


background image

WARNINGS AND PRECAUTIONS

!

The lightning flash with arrowhead symbol, within an equilateral 
triangle, is intended to alert the user to the presence of uninsulated 
"dangerous voltage" within the product's enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock to persons. 

This symbol is intended to alert the user to the presence of important 
operation and maintenance (servicing) instructions in the literature 
accompanying the appliance. 

1

WARNING:

 

To reduce the risk of fire or electric shock, do not expose this apparatus to 
rain or moisture. 

The apparatus shall not be exposed to dripping or splashing and that no 
objects filled with liquids, such as vases, shall be placed on apparatus. 

WARNING:

 

To reduce the risk of electric shock, do not remove cover (or back). 

 


background image

FCC STATEMENT 

FCC STATEMENT

 

1. This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: 
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including 
interference that may cause undesired operation. 
2. Changes or modifications not expressly approved by the party responsible 
for compliance could void the user's authority to operate the equipment. 

NOTE:

 This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates uses and 
can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

  

Reorient or relocate the receiving antenna. 

  

Increase the separation between the equipment and receiver. 

  

Connect the equipment into an outlet on a circuit different from that to 

    which the receiver is connected. 

  

Consult the dealer or an experienced radio/TV technician for help. 

2

 


background image

Caution: Please read carefully all the following important safeguards to en-

sure safe operation.

1. Read these Instructions.                                                                                

2. Keep these Instructions.                                                                            

3. Heed all Warnings.                                                                                

4. Follow all instructions.                                                                       

5. Do not use this apparatus near water.                                                                 

6. Clean only with a dry cloth.                                                                          

7. Do not block any ventilation openings. Install in accordance with the 

    manufacturer's instructions.                                                                   

8. Do not install near any heat sources such as radiators, heat registers, stoves, 

    or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding - type plug. 

    A polarized plug has two blades with one wider than the other. When the 

   provided  plug does not fit into your outlet, consult an electrician for 

   replacement of the obsolete outlet.              

10. Protect the power cord from being walked on or pinched particularly at plugs, 

    convenience receptacles, and the point where they exit from the apparatus. 

11. Only use attachments/accessories specified by the manufacturer. 

12. Use only with a cart, stand, tripod, bracket, or table specified 

    by the manufacturer, or sold with the apparatus. When a 

    cart or rack is used,use caution when moving the cart/

    apparatus,  combination to avoid injury from tip-over.

IMPORTANT SAFETY INSTRUCTIONS

3

 


background image

4

IMPORTANT SAFETY INSTRUCTIONS

13. Unplug this apparatus during lightning storms or when unused for long 

    periods of time. 

14. Refer all servicing to qualified service personnel. Servicing is required when 

    the apparatus has been damaged in any way, such as power-supply cord or plug 

    is damaged, liquid has been spilled or objects have fallen into the apparatus, 

    the apparatus has been exposed to rain or moisture, does not operate normally, 

    or has been dropped. 

15. WARNING: The mains plug (appliance coupler) is used as disconnect device, 

    the disconnect device shall remain readily operable.

16. The battery (battery or batteries or battery pack) shall not be exposed to 

    excessive heat such as sunshine, fire or the like.

17. No naked flame sources, such as lighted candles, should be placed on the 

    apparatus.

18. 

Label marking is located at the bottom of the apparatus.

19.       This equipment is a Class II or double insulated electrical appliance. It has 

    been designed in such a way that it does not require a safety connection to 

    electrical earth.

Contents:

- Remote Control                    x 1            

     

- S

x 8

- Wall mounting brackets        x 2                    - W

x 2

- RCA to RCA                         x 1                    - RCA to 3.5mm             x 1
- Coaxial Cable                       x 1                    - A

x 8

- User's Manual                       x 1                    - Installation Guide

x 1

crew                             

     

all mounting screw     

ssembling bolt             

         

PARTS LIST

 


background image

FRONT PANEL - CONTROLS AND FUNCTIONS

5

5.

: Power Standby 

STANDBY

Button.

1. Remote Sensor.

6.INPUT:Input Selection Button.

2. STANDBY:Standby  Input Indicator.

8.VOL+: Volume Upward Adjustment Button.

7.VOL-: Volume Downward Adjustment Button.

1

2

3

4

5

6

7

8

3. TV:TV Input Indicator.

4. AUX/COAX:AUX and  Coaxial Input Indicator.

 


background image

40 Watt + 2 x 20 Watt 

AC 120V~60Hz

2.4GHz DIGITAL WIRELESS 
SYSTEM 

SOUNDBAR 

MADE IN CHINA

CSMP95

FCC ID:

xxxxxxx

This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful 
interference, and (2)this device must accept any 
interference received, including interference that 
may cause undesired operation.

XXXXXXX

CONFORMS TO ANSI/UL STD.60065

CERTIFIED TO CAN/CSA STD.C22.2 No.60065

6

3.AUX Stereo 

 Audio Input.

Right

4.AUX Stereo 

 Audio Input.

Left

REAR PANEL - CONTROLS AND FUNCTIONS

9

10

5.TV Stereo 

 Audio Input.

Right

6.TV Stereo 

 Audio Input.

Left

8

2

3

4

5

1

6

1.Power On/Off Switch.(Soundbar)

2.AC Power Cord.(Soundbar)

7

40 Watt + 2 x 20 Watt 

AC 120V~60Hz

2.4GHz DIGITAL WIRELESS 
SYSTEM 

SOUNDBAR 

MADE IN CHINA

CSMP95

7.

 Audio Input.

Coaxial

AC 120V~60Hz

XXXXXXX

CONFORMS TO ANSI/UL STD.60065

CERTIFIED TO CAN/CSA STD.C22.2 No.60065

AC 120V~60Hz

 


background image

REAR PANEL - CONTROLS AND FUNCTIONS

7

9.Power On/Off Switch.(Subwoofer)

10. AC Power Cord.(Subwoofer)

8.STANDBY:Subwoofer Standby  Input Indicator.

SYSTEM CONNECTION INSTRUCTIONS

TV

Video In

Video Out

Rear-R

Center

Woofer

Rear-L

Front-L

Front-R

DVD Player
optional

Optical

Audio Out

Rear-R

Center

Woofer

Rear-L

Front-L

Coaxial

Front-R

Video Out

Scart out

Video

S-Video

U

V

Y

Manufactured under license from Dolby Laboratories.

"Doldy","Dolby Digital", and the double-D symbol are 

trademarks of Dolby Laboratories. Confidential

Unpublished Works.

@1992-1997 Dolby Laboratories, Inc.

All rights reserved.

       Apparatus Claims of U.S. Patent Nos.
4,631,603;4,577,216;4,819,098 and 4,907,093
      licensed for limited viewing uses only. 

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

!

AC 100V~240V
      50/60Hz

Video

RCA Cable

To Stereo Output

Audio Out

 


background image

REMOTE CONTROL

8

1.

: Power Standby.

STANDBY

4.VOL-: Volume Downward Adjustment Button.

8.MUTE: Mute Function Button .

2.MUSIC: 

 

Music Mode

.

Selection

3.NORMAL: Normal Mode 

.

Selection

5.BASS-: Bass Downward Adjustment Button.

6.TREBLE-: Treble Downward Adjustment Button.

7. INPUT: Input

.

 Selection 

Button 

11

12

13

2

3

4

5

6

7
8

9

10

1

9.RESET: Location Retrieval Button .
10.MOVIE: M

 

ovie Mode 

.

Selection

11.VOL+: Volume Upward Adjustment Button.

12.BASS+: Bass Upward Adjustment Button.

13.TREBLE+: Treble Upward Adjustment Button.

 


background image

9

REMOTE CONTROL

1.Replace the remote control battery when it no longer operates the 

   unit, or the range is reduced considerably.

2.Use only CR2025 or CR2032 3V lithium batteries

3.Bear in mind that lighting & other room conditions, in addition to 

   battery age, can affect the operating range of an infrared remote control.

4.Battery disposal:

   Batteries and rechargeable batteries are prohibited to dispose into 

   household waste.

REMOTE CONTROL BATTERY REPLACEMENT

CR2025

 


background image

10

SPEAKER PLACEMENT

PLACING THE SOUNDBAR ON A TABLE
If your TV is placed on a table, you can place the soundbar on the table directly 
in front of the TV stand, centered with the TV screen. 
As long as the surface of the table is flat, the soundbar will rest on its rubber 
bumpers.

PLACING THE SUBWOOFER

The performance of a subwoofer is directly related to its placement in the listening 
room and its physical position relative to the other speakers in the system. 

While it is true that in general, our ears do not hear directional sounds at the law 
frequencies where subwoofers operate, when installing a subwoofer within the 
limited confines of a room, the reflections, standing waves and absorptions 
generated within the room will strongly influence the performance of any 
subwoofer system. As a result, the specific location of the subwoofer in the room 
does become important to the amount and quality of bass that is produced.

 


background image

PLACING THE SUBWOOFER

11

For example, placing the subwoofer next to a wall generally will increase the 
amount of bass in the room; placing it in a corner generally will maximize 
amount of bass in the room. However, corner placement can also increase the 
destructive effect of standing waves on bass performance. This effect can vary 
depending on the listening position 

 some listening positions may yield very 

good results, while others may have far too much (or too little) bass at certain 
frequencies.

In many rooms, placing the subwoofer along the same plane as the soundbar can 
produce the best integration between the sound of the subwoofer and that of the 
left and right speakers. In some rooms, the best performance could even result 
from placing the subwoofer behind the listening position .

We strongly recommend that you experiment with placement before choosing a 
final location for your subwoofer. One way you can determine the best location 
for the subwoofer is by temporarily placing it in the listening position and playing 
music with strong bass content. Move around to various locations in the room 
while the system is playing (putting your ears where the subwoofer would be 
placed), and listen until you find the location where the bass performance is best. 
Place the subwoofer in that location.

IMPORTANT: The maximum wireless operation distance between the soundbar 
and subwoofer is approximately 50 feet (15.3m).

 


background image

A. Switch On/Off

1. Before turning on the system, please connect it according to 

    the System Connection Instruction.

2. Connect AC power supply with this product.

    (Caution: Power source must be consistent with this product.)

3. Press on the POWER switch button on the Rear Panel of the main

    unit to switch on the system, the standby indicator will light up. 

    Then press the STANDBY button on the remote controller to enter  

    the normal status. Press the button on  the remote controller once

 again to keep power in standby status.   

B. VOLUME

1.Press the VOL + button on the front of the main unit, or the 

VOL + button on the remote control to increase the volume. 

2.Press the VOL - button on the front of the main unit, or the 

         VOL - button on the remote control to decrease the volume.

C. MUTE

1. Press the MUTE button on the remote controller once to 
    keep the performance silent.

Press the RESET button on the remote controller and it will reset 

all settings including SW Speaker output, Front Speaker output to 

factory default settings. 

D. RESET

OPERATION       

12

 


background image

13

WALL MOUNTING BRACKET INSTALLATION GUIDE

1.Take out the soundbar, paperboard, assembling bolt, bracket screw, 
   plastic wall mounting bracket and wall mounting screw.
2.Draw out the location of the holes for the screws by paperboard and 
   pencil, to confirm the location of the plastic wall mounting bracket. 
   Please make sure that the paperboard is horizontal and the height of the 
   soundbar is suitable for you.
3.Please drill 8 holes according to the location you drawed on the wall by 
   pencil.
4.Punch the assembling bolts into the holes on the wall.
5.Align the holes on plastic wall mounting bracket with the holes on 
   paperboard and wall, then fasten with 8 screws through the assembling 
   bolts.
6.Screw the two wall mounting screws on the rear panel of soundbar, then
   you can hang up your soundbar on the middle holes of both plastic wall 
   mounting bracket easily.

 


background image

1.Power Supply....................................................................

AC 120V/60Hz

2.Total Power Consumption........................................................................80W
3.Input Sensitivity (Subwoofer).................................................200mV   20mV
4.Input Sensitivity (Soundbar)...................................................750mV   50mV
5.Speaker Impedance (Subwoofer)..........................................................8 Ohm
6.Speaker Impedance (Soundbar)............................................................8 Ohm
7.S/N (A Weight)........................................................................................80dB
8.Subwoofer Power Output ........................................................................40W
9.Soundbar Power Output ....................................................................2 x 20W
10.THD (1kHz, 1W)...................................................................................0.5%
11.Frequency Response.....................................................  20Hz~20KHz   3dB
12.L/R Separation (1kHz)..........................................................................30dB
13.L/R Balance (Stereo)...........................................................................    2dB

......

SPECIFICATIONS

Note: Specifications are subject to change for improvements.

14

 


background image

TROUBLESHOOTING

If you have a problem with this device, please read the troubleshooting guide below and 
check our website at 

 for Frequently Asked Questions (FAQs) and 

firmware updates. If these resources do not resolve the problem, please contact Technical 
Support.

www.cobyusa.com

Address
COBY Electronics Corporation
Technical Support
150 Knowlton Way
Savannah, GA 31407

Email

Web

Phone
800-727-3592:                    Weekdays: 8:30AM-9:00PM EST
                                                 Saturdays: 9:00AM-5:30PM EST

techsupport@cobyusa.com

www.cobyusa.com