PDF User Manual

  1. Home
  2. Manuals
  3. Cobra Pro 9380 Operating Instructions Manual

Cobra Pro 9380 Operating Instructions Manual

Made by: Cobra
Type: Operating Instructions
Category: Radar Detector
Pages: 16
Size: 2.39 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

PRO 9380

11 BAND

HIGH-PERFORMANCE 
RADAR/LASER DETECTOR 
WITH XTREME RANGE 
SUPERHETERODYNE

TECHNOLOGY

Nothing comes close to a Cobra

®

English

Operating Instructions 

Printed in China 

Part No. 480-132-P

 


background image

Important Information And 

Customer Assistance

Introduction

A1 English

Important Information

Federal Laws Governing The Use Of Radar Detectors 

It is not against federal law to receive radar transmissions with your Cobra radar/
laser detector. The Communications Act of 1924 guarantees your right to receive 
radio transmissions on any frequency. Local laws that contravene this Act, while 
illegal, may be enforced by your local law enforcement officials until and unless 
they are prohibited from doing so by federal court action.

Safety Alert

Use of this product is not intended to, and does not, ensure that motorists or
passengers will not be involved in traffic accidents. It is only intended to alert 
the motorist that an emergency vehicle equipped with a Cobra Safety Alert 
transmitter is within range as defined by that product. Please call local fire 
and police departments to learn if coverage exists in your area.

Safe Driving 

Motorists, as well as operators of emergency or service vehicles, are expected to
exercise all due caution while using this product, and to obey all applicable traffic laws.

Security Of Your Vehicle 

Before leaving your vehicle, always remember to conceal your radar detector 
in order to reduce the possibility of break-in and theft.

Customer Assistance

Should you encounter any problems with this product, or not understand its many features,
please refer to this owner’s manual. If you require further assistance after reading this
manual, Cobra Electronics offers the following customer assistance services:

For Assistance In The U.S.A.

Automated Help Desk English only. 24 hours a day, 7 days a week 773-889-3087 (phone).

Customer Assistance Operators English and Spanish. 8:00 a.m. to 6:00 p.m. CT 
Mon. through Fri. (except holidays) 773-889-3087 (phone).

Questions English and Spanish. Faxes can be received at 773-622-2269 (fax).

Technical Assistance English only. www.cobra.com (on-line: Frequently Asked
Questions). English and Spanish. productinfo@cobra.com (e-mail).

For Assistance Outside The U.S.A.

Contact Your Local Dealer

©2004 Cobra Electronics Corporation

6500 West Cortland Street

Chicago, Illinois 60707 USA

www.cobra.com

Customer Assistance

 


background image

Nothing comes close to a Cobra

®

1

Table Of Contents

Introduction

Introduction

Important Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Customer Assistance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Controls, Indicators And Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Product Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3

Your Detector

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Highway/City Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
UltraBright Data Display Brightness  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Muting An Alert  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Auto Mute Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
IntelliMute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
VG-2 And Spectre 1 Alert Audio Settings  . . . . . . . . . . . . . . . . . . . . . . . . 12

Detection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Signals Detected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Audio Alerts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Visual Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Instant-On Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Responding To Alerts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Understanding Radar And Laser  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Warranty

Limited 1-Year Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Customer Assistance

Product Service  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Trademark Acknowledgement  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Optional Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Order Form  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Display And Product Features

Introduction

Nothing comes close to a Cobra

®

A3

Xtreme Range 
Superheterodyne Technology
With super-fast sweep circuitry, 
XRS provides extra detection range 
and the best possible advance warning 
to even the fastest radar guns

Detection And Separate Alerts For: 
Radar signals (X, K and Ka bands, 
with signal strength indicated), 
laser signals, Safety Alert signals, 
Strobe Alert signals, VG-2 signals,
Spectre 1 signals

LaserEye   
For 360° detection of laser and 
strobe signals

Instant-On Ready 
Detects radar guns with “instant-on”
(very fast) speed monitoring capabilities

Tone Alerts 
With adjustable volume

UltraBright Data Display 
Easy-to-read with adjustable brightness

City Or Highway 
Modes to reduce false alerts

Safety Alert 
Traffic warning system distinguishes
important safety alerts from other 
K band signals

Strobe Alert
Emergency vehicle warning system

Manual Mute Or Auto Mute 
A mute function of audio alerts

IntelliMute 
A mute function which 
automatically reduces false 
alerts by sensing engine RPMs

Mounting 
Mounts easily on windshield 
or dashboard

Product Features

Congratulations! You’ve made a smart choice by purchasing the PRO 9380
high performance radar/laser detector from Cobra. Just look at some of the
sophisticated features and capabilities your new unit includes:

Display

This booklet describes the simple steps for mounting and setting up your detector. 
It also provides helpful information about how radar and laser guns are used and 
how you can interpret the alerts you receive.

IntelliMute
Indicator 

Radar, VG-2, Spectre 1,
Safety And Strobe Indicators

Signal Strength, Laser And City/
Highway Mode Indicators

Signal Strength 1 (weakest) to 5 (strongest)

NOTE: In This Manual
When steady, 
the display will 
be shown:

When blinking,
the display will
be shown:

X K Ka 

V

S  

c

X K Ka

V

S  

c

X K Ka V S   

L

Controls, Indicators

And Connections

Introduction

A2 English

Controls, Indicators And Connections

12V DC
Power Jack

On-Off/

Volume
Control

Allows you 

to adjust the

volume of the

tone alerts.

IntelliMute

Button

Engine RPM 

sensing mute

function which

reduces false 

alerts. Button 

turns IntelliMute 

On and Off

(Also enters

IntelliMute 

setting mode.*)

City Button 

For City or Highway
modes to reduce
false alerts.

LaserEye 

For 360° detection of 
laser and strobe signals.

Windshield Bracket 

Release Button

Speaker

Mute Button

For manual mute 

or auto mute of

audio alerts. 

Dim Button 

Allows you to adjust the
UltraBright Data Display
brightness for easy reading. 
(Also turns VG-2 and Spectre 1
alerts On and Off.*)

* Press and hold for two (2) seconds

to access these functions.

Windshield

Bracket Mount

WARNING

Modifications or parts substitutions not approved 
by Cobra Electronics Corporation may violate 
FCC Rules and void your authority to operate 
this equipment.

 


background image

Nothing comes close to a Cobra

®

Installation

Your Detector

3

Installation

Your Detector

2

English

Installation

Where To Mount Your Unit

You will get optimum performance from your detector if you Mount it at a
point approximately in the center of the vehicle, as low as possible on the
front windshield without obstructing the unit’s view of the road either to 
the front or rear. You can also mount it directly on the dashboard. 

The unit’s lens must not be blocked and the LaserEye should have a clear view
out the back window to allow 360° detection.

Radar and laser signals pass through glass but not through other materials
and objects. Objects that can block or weaken incoming signals include: 

Windshield wiper blades

Mirrored sun screens

Dark tinting at the top of the windshield

Heated windshields currently available on some vehicles 
(Instaclear for Ford, Electriclear for GM.) Consult your dealer 
to see if you have this option.

1.

Attach the rubber 
cups to the bracket.

2. Make sure the rubber cups and your windshield are clean.

3. Push the bracket firmly

onto the windshield.

4. Attach the detector to 

the bracket. Check the 
angle of the unit.

5. To adjust the angle if

necessary, gently push or
pull on the bracket to bend
it. DO NOT use the detector
to bend the bracket.

6. Plug the power cord 

into the detector.

7. Plug the cigarette lighter

adapter on the power 
cord into your vehicle’s
cigarette lighter.

8. You can temporarily remove the detector whenever you 

wish by pressing the bracket release button and sliding 
it off the bracket.

Windshield Mounting

The LaserEye Should Have A Clear View

Windshield Mounting

Dashboard Mounting

 


background image

To Turn On The Unit And Adjust The Audio Volume

Rotate the On-Off/
Volume 
control 
clockwise (away 
from you).

Tone

Visual Display

Three (3) beeps

h

appears in the display

indicating that the power 
is On.

Getting Started

Getting Started

Your Detector

Nothing comes close to a Cobra

®

5

Installation

Your Detector

4

English

1.

Place the detector on the dashboard to find a location 
where the unit has a clear, level view of the road. 
The angle can NOT be adjusted after mounting.

2. Remove the paper backing

from one (1) side of the
hook-and-loop fastener.

3. Attach the pad to the

dashboard at your chosen
location and remove the 
other paper backing.

4. Attach the detector to the

hook-and-loop fastener. 
You can remove and
reattach the unit as 
often as you like.

6. Plug the power cord 

into the detector.

7. Plug the cigarette lighter

adapter on the power 
cord into your vehicle’s
cigarette lighter.

Dashboard Mounting

Power On

X K Ka V S

h

On-Off/

Volume Control

Rotate clockwise 

(away from you)

NOTE
In some vehicles, power is supplied to the cigarette lighter 
even while the ignition is Off. If this is the case with your 
vehicle, you should turn Off or unplug your detector when
parking for lengthy periods.

Secondar

Icons

 


background image

Settings

Your Detector

Nothing comes close to a Cobra

®

7

UltraBright Data Display Brightness

You can choose from three (3) settings for Brightness of the display. 
You can cycle through the settings by repeatedly pushing the Dim button. 
The factory setting is Bright.

Settings

Your Detector

6

English

Settings

When changing the Settings on your detector, please keep in mind:

Buttons can have multiple functions.

All settings will be stored in memory when the power is 
turned 

Off and recalled when the power is turned back On.

Highway/City Mode

Setting your detector to City mode delays all X band audio alerts until 
the signal strength reaches Level 3. (A single beep will sound when the 
signal is first detected.) This will reduce false alerts while you are driving 
in, or near, urban areas where there are many sources for conflicting 
X band signals such as microwave towers and automatic door openers. 

To change settings, follow the procedure listed below, which indicates 
what you will see and hear as you complete each step. The factory setting 
is 

Highway mode.

Dim Button

Press and

release

Bright

Dark             

Dim

Press and
release 

Dim

button

City Button

Press and release

City Mode

X K Ka V S

c

Highway Mode

X K Ka V S 

h

To Change From Highway Mode To City Mode

Press and release 
the City button.

Tone

Visual Display

One (1) beep

c

appears in the display

To Change From City Mode back To Highway Mode

Press and release 
the City button again.

Tone

Visual Display

Two (2) beeps

h

appears in the display

To Change The Brightness To Dim

Press and release 
the Dim button
once.

Tone

Visual Display

One (1) beep

Display dims

To Change The Brightness To Dark

Press and release 
the Dim button 
again.

Tone

Visual Display

One (1) beep

Display remains dim 
(no visual alerts will be seen)

To Change The Brightness To Bright

Press and release 
the Dim button a 
third time.

Tone

Visual Display

Two (2) beeps

Display returns 
to full brightness

 


background image

Settings

Your Detector

Nothing comes close to a Cobra

®

9

Settings

Your Detector

8

English

Muting An Alert

Your detector allows you to quickly turn Off an audio Alert by momentarily
pressing the Mute button. If you press the Mute button a second time 
during the Alert, the audio Alert will be turned back On.

Auto Mute Mode

Auto Mute will automatically reduce the audio volume of all alerts 
after four (4) seconds for as long as the signal is detected. The factory 
setting for Auto Mute is On.

IntelliMute

IntelliMute is a unique new feature that allows you to avoid alerts you 
don’t need to hear because you are stopped or moving slowly. By sensing 
the “revs” (RPMs) of your engine, IntelliMute knows when you are at low
speed and automatically mutes alerts (except for strobe signals from
emergency vehicles).

Before IntelliMute will work, you must set an activation point for your engine’s
revs (see page 11). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled 
each time the power is turned 

On. The factory setting is IntelliMute Off.

NOTE
IntelliMute may not work with some vehicles because it cannot sense
the engine’s revs. In such cases, you can reduce unwanted audio alerts
by using 

Auto Mute and City mode when appropriate.

IntelliMute

Button

Press and

release

IntelliMute On

X K Ka V S

c

Mute Button

Press and release

To Turn Auto Mute Off

Press and release 
the Mute button 
while no alert 
is occurring.

Tone

Visual Display

One (1) beep

None

To Turn Auto Mute On

Press and release 
the Mute button 
again while no 
alert is occurring.

Tone

Visual Display

Two (2) beeps

None

To Turn IntelliMute On

Press and release 
the IntelliMute 
button.

Tone

Visual Display

Two (2) beeps

Dot appears next to the large
character on the right

To Turn IntelliMute  Off

Press and release 
the IntelliMute 
button again.

Tone

Visual Display

One (1) beep

None

 


background image

Settings

Your Detector

Nothing comes close to a Cobra

®

11

Settings

Your Detector

10 English

What To Remember While Using IntelliMute

IntelliMute works with both City and Auto Mute modes.

Whenever your engine revs are below the activation point, 
the dot next to the large character on the right side of the display 
will remain lit. Above the activation point, the dot will blink twice 
every two (2) seconds.

If, for any reason, the unit stops sensing your engine’s revs, 
IntelliMute will indicate an error and automatically turn Off.

The rev point you set will be stored in the unit’s memory when 
power is turned Off and recalled each time the power is turned On.

NOTE
The rev point must be reset if you use your detector in a different vehicle.

NOTE
When initially choosing your IntelliMute activation point, a setting 
of approximately 300 to 600 RPMs above idle is recommended. 
You can reset the activation point at any time to fit your individual
preferences and driving style.

Setting The IntelliMute Activation Point

Your detector must be installed in your vehicle.

CAUTION
Do not attempt to set the rev point while driving. 
Your vehicle should be parked and idling. 

IntelliMute must be turned 

On before setting the activation point. 

You will hear a series of beeps as you follow the steps on page 11.

IntelliMute Button

Press and hold for 

two (2) seconds

Below Activation Point

X K Ka V S

L

Above Activation Point

X K Ka V S

L

To Set The IntelliMute Activation Point

Press and hold
the IntelliMute 
button for two 
(2) seconds.

Tone

Visual Display

Two (2) beeps

None

Rev your engine to
the level you wish 
to set (recommend
slightly above idle)
and hold revs steady
for two (2) seconds. 

None

Three (3) bars will 
flash in succession

At the desired 
rev level, press 
and release the
IntelliMute
button.

Three (3) beeps

All three (3) bars flash 
three (3) times

Tone

Visual Display

Four (4) beeps

E

appears

X K Ka V S  

E

1

2

3

1

2

3

NOTE
If the unit is unable to sense usable pulses within three (3)
seconds or if you do not set a rev point within 20 seconds 
of beginning these steps, IntelliMute will indicate an error 
and automatically turn Off.

 


background image

Detection

Your Detector

Nothing comes close to a Cobra

®

13

Detection

Signals Detected

The tables on the following pages show you the types of Signals your 
detector will detect, as well as the visual alerts it provides for each of them.

Audio Alerts

A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K and Ka band 
radar signals, the tones will repeat faster as you approach the signal 
source. The repeat rate of the tones gives you useful information about 
the signal detected. (See responding to alerts on page 16.)

Visual Display

An indication of the type of signal detected will appear in the UltraBright 
data Display. During X, K and Ka alerts, a number will also appear, 
indicating the strength of the signal detected. (1 = weakest, 5 = strongest)

During laser alerts the letter 

L

will appear, instead of the signal strength indication.

During VG-2 or Spectre 1 alerts, the letter will appear. It will be steady
during VG-2 and blink during Spectre 1.

During Safety Alert and Strobe Alert the letter will appear. It will be 
steady during a Safety Alert and will blink during a Strobe Alert.

Settings

Your Detector

12 English

VG-2 And Spectre 1 Alert Audio Settings

The detector is undetectable by police VG-2 and Spectre 1 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show VG-2 and Spectre 1 alerts. 
The factory setting is VG-2 and Spectre 1 alert On.

Dim Button

Press and hold for

two (2) seconds

On/Off Indicator

X K Ka

V

S  

c

X Signal Detected

X

K Ka V S

2

Laser Signal Detected

X K Ka V S 

L

VG-2 Alert Signal Detected

X K Ka

V

S  

c

K Signal Detected

X

K

Ka V S

3

Ka Signal Detected

X K

Ka

V S  

5

Safety Alert Signal Detected

X K Ka V 

S

c

Strobe Alert Signal Detected

X K Ka V

S

c

Spectre 1 Alert Signal Detected

X K Ka

V

S  

c

To Turn VG-2 And Spectre 1 Alerts Off

While no signal 
is being detected, 
press and hold 
the Dim button for 
two (2) seconds.

Tone

Visual Display

One (1) beep

V

will blink once 

in the display

To Turn VG-2 And Spectre 1 Alerts On

While no signal 
is being detected, 
press and hold 
the Dim button 
for two (2) 
seconds again.

Tone

Visual Display

Two (2) beeps

V

will blink twice 

in the display

 


background image

Detection

Your Detector

Nothing comes close to a Cobra

®

15

Detection

Your Detector

14 English

X Signal Detected

X

K Ka V S

2

K Signal Detected

X

K

Ka V S 

3

Ka Signal Detected

X K

Ka

V S 

5

Radar Signals And Visual Displays

Type of Signal

Visual Display

X Band Radar

and Signal Strength

K Band Radar

and Signal Strength

Ka Band Radar

Ka and Signal Strength

Laser Signal Detected

X K Ka V S

L

Laser Signals And Visual Displays

Type of Signal

Visual Display

LTI 20-20*

L

is Steady

LTI Ultra-Lyte*

L

is Steady

Kustom Signals ProLaser*

L

is Steady

Kustom Signals ProLaser III*

L

is Steady

* Your detector provides 360˚ detection of these signals.

Safety Alert Signals And Visual Displays

Type of Signal

Visual Display

Emergency Vehicles

is Steady

Road Hazards

is Steady

Trains

is Steady

Strobe Alert Signal Detected

X K Ka V

S

c

Strobe Alert Signals And Visual Displays

Type of Signal

Visual Display

3M Opticom or Tomar*

Blinks

* Your detector provides 360˚ detection of this signal.

Safety Alert Signal Detected

X K Ka V 

S

c

VG-2 And Spectre 1 Alert Signals And Visual Displays

Type of Signal

Visual Display

Interceptor VG-2

is Steady

Spectre 1

Blinks

VG-2 Alert Signal Detected

X K Ka

V

S  

c

Spectre 1 Alert Signal Detected

X K Ka

V

S  

c

NOTE
Beep rate changes with different laser alerts.

NOTE
There are different tones for each Safety Alert.

NOTE
There are different tones for each alert.

 


background image

Description

Interpretation

Recommended
Response

Tone repeats slowly at
first, then speeds up
rapidly.

Probably police radar

FULL ALERT

Tone sounds one (1) 
time only.

Probably a false alarm, 
but possibly pulsed radar,
VG-2, or Spectre 1 nearby

Exercise caution

Tone instantly begins 
repeating rapidly.

Radar, VG-2, or Spectre 1
nearby has been activated
suddenly

FULL ALERT

Tone repeats slowly as you
approach a hill or bridge,
then speeds up sharply as
you reach it.

Probably police 
radar beyond the 
hill or bridge

FULL ALERT

Tone repeats slowly 
for a short period.

Probably a false alarm

Exercise caution

Any type of laser alert.

Laser alerts are 
never false alarms

FULL ALERT

Any Safety Alert 
or Strobe Alert.

You are nearing an
emergency vehicle,
railroad crossing, 
or road hazard
(construction, 
accident, etc.)

Exercise caution

Understanding Radar And Laser

Your Detector

Nothing comes close to a Cobra

®

17

Understanding Radar And Laser

Radar Speed Monitoring Systems

Three (3) band frequencies have been approved by the Federal Communications
Commission (FCC) for use by speed monitoring radar equipment: 

X band

10.525 GHz

K band

24.150 GHz

Ka band

33.400 – 36.00 GHz

Your detector detects signals in all three (3) radar bands.

VG-2 And Spectre 1

VG-2 and Spectre 1 are “detector detectors” that work by detecting low-level
signals emitted by most radar detectors. Your detector does not emit signals
that can be detected by VG-2 or Spectre 1, but does detect VG-2 and Spectre 1
signals and will alert you when a device is in use near your vehicle, if you 
so choose.

Safety Alert Traffic Warning  System

FCC-approved Safety Alert transmitters emit microwave radar signals that
indicate the presence of a safety-related concern. Depending on the frequency
of the signal emitted, it can indicate a speeding emergency vehicle or train, 
or a stationary road hazard. 

Because these microwave signals are within the K band frequency, most
conventional radar detectors will detect Safety Alert signals as standard 
K band radar. Your detector, however, is designed to differentiate between
standard K band and Safety Alert signals, and give separate alerts for each.

Safety Alert technology is relatively new. Safety Alert transmitters can 
be found in limited numbers in all 50 states, but the number is growing.
Depending on your location, you may not receive these alerts regularly 
and may often encounter emergency vehicles, trains and road hazards 
without being alerted. As the number of transmitters increases, 
these alerts will become more common. 

When you receive such an alert, please watch for emergency vehicles ahead 
of you, on cross streets and behind you. If you see an emergency vehicle
approaching, please pull over to the right side of the road and allow it to pass.

Detection

Your Detector

16 English

Instant-On Detection

Your detector is designed to detect Instant-On speed monitoring signals,
which can suddenly appear at full strength.

NOTE
You should take appropriate action 
immediately whenever an instant-on alert is given.

Responding To  Alerts

 


background image

Maintenance

Your Detector

Nothing comes close to a Cobra

®

19

Understanding Radar And Laser

Your Detector

18 English

Strobe Alert

Special strobes mounted on the light bars of authorized emergency 
vehicles (fire trucks, police cars, ambulances) automatically change traffic
signals as the vehicle approaches an intersection. These strobes and the
special strobe detectors located on the traffic signals, introduced fairly
recently by 3M and Tomar, are already in use in more than 1000 cities
nationwide. Cobra’s exclusive Strobe Alert detector will detect these 
special strobes and give an emergency vehicle alert. 

When you receive such an alert, please watch for an approaching 
emergency vehicle and pull over to allow it to pass. To inquire about 
coverage in your area, contact your local fire and police departments.

LIDAR (Laser)

The correct name for the technology that most people refer to as 
laser is actually LIDAR, which stands for Light Detection and Ranging.

LIDAR operates much like radar. Its signal spreads out like a radar 
signal, though not as widely. Unlike radar, LIDAR must have a clear 
line of sight to its target vehicle throughout the entire measurement 
interval. Obstructions such as sign posts, utility poles, tree branches, 
etc., will prevent valid speed measurement.

Some common questions about LIDAR include:

Does weather have any affect on LIDAR?
Yes. Rain, snow, smoke, fog, or airborne dust particles will reduce the 
effective range of LIDAR and can, if dense enough, prevent its operation.

Can LIDAR operate through glass?
Yes. Newer LIDAR guns can obtain readings through most types of glass.
However, the laser pulse also can be received through glass to trigger 
an alarm by your detector.

Can LIDAR operate while in motion?
No. Because LIDAR operates by line of sight, the person using it cannot
drive the vehicle, aim and operate the gun all at the same time.

Is LIDAR legal to use?
Yes. It is legal in all 50 states.

Maintenance

Maintenance Of Your Radar Detector

Your detector is designed and built to give you years of 
trouble-free performance without the need for service.
No routine Maintenance is required.

If your unit does not appear to be operating properly, 
please follow these troubleshooting steps:

Make sure the power cord is properly connected.

Make sure the socket of your vehicle’s cigarette lighter 
is clean and free of corrosion.

Make sure the power cord’s cigarette lighter adapter 
is firmly seated in your cigarette lighter.

Check the power cord fuse. (Unscrew the ribbed end cap 
of the cigarette lighter adapter and examine the fuse. 
If required, replace it with a 2-amp fuse only.)

 


background image

Warranty

Warranty

Nothing comes close to a Cobra

®

21

Specifications

20 English

Specifications

Band And Frequencies

Band

Frequencies

X Band

10.525

± 0.050

GHz

K Band

24.125

± 0.125

GHz

Safety Alert

24.070

± 0.010

GHz

Traffic Warning

24.110

± 0.010

GHz

System

24.190

± 0.010

GHz

24.230

± 0.010

GHz

Ka Band

34.700

± 1.300

GHz

Laser

910

± 50

nm

Strobe

700

± 300

nm

Unit Dimensions And Weight

Dimensions* (H x W x D)

Weight*

1

1

3

" x 2

3

4

" x 4

1

3

4.83 oz.

(34 mm x 70 mm x 110 mm)

(137 g)

* Dimensions and weight measurements are approximate.

This radar detector is covered by one or more of the following U.S. patents: 5,497,148; 5,594,432;
5,612,685; 6,078,279; 6,094,148. Additional patents may be listed inside the product or pending. 

Limited 1-Year Warranty

For Products Purchased In The U.S.A.

Cobra Electronics Corporation warrants that its Cobra 11 Band Radar/Laser 
Detectors, and the component parts thereof, will be free of defects in
workmanship and materials for period of one (1) year from the date of first
consumer purchase. This warranty may be enforced by the first consumer
purchaser, provided that the product is utilized within the U.S.A.

Cobra will, without charge, repair or replace, at its option, defective 11 Band
Radar/Laser Detectors, products or component parts upon delivery to the
Cobra Factory Service Department, accompanied by proof of the date of first
consumer purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product for
warranty service, but the return charges will be at Cobra’s expense, if the
product is repaired or replaced under warranty.

This warranty gives you specific rights, and you may also have other rights 
which vary from state to state.

Exclusions:  This limited warranty does not apply: 

1. To any product damaged by accident.  

2. In the event of misuse or abuse of the product or as a result 

of unauthorized alterations or repairs.  

3. If the serial number has been altered, defaced or removed. 

4. If the owner of the product resides outside the U.S.A. 

All implied warranties, including warranties of merchantability and fitness for 
a particular purpose are limited in duration to the length of this warranty.

Cobra shall not be liable for any incidental, consequential or other damages;
including, without limitation, damages resulting from loss of use or cost of 
installation.

Some states do not allow limitations on how long an implied warranty lasts
and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to you.

Your Detector

 


background image

Trademark Acknowledgement

Customer Assistance

Nothing comes close to a Cobra

®

23

Product Service

Customer Assistance

22 English

Product Service

If you have any questions about operation or installing your new 
Cobra product, or if you are missing parts…

Please call Cobra first! DO NOT RETURN THIS PRODUCT
TO THE STORE! See customer assistance on page A1.

If you suspect that your unit requires service, please call 773-889-3087
BEFORE shipping it to Cobra. This will ensure that you receive service 
as quickly as possible.

If you are asked to send your unit to the Cobra factory, please follow 
these steps:

1. Send the complete unit, including power cord. (It is not necessary 

to include the mounting bracket.)

2. For warranty repair, enclose some form of proof-of-purchase, 

such as a photocopy or carbon copy of a sales receipt. If you 
send the original receipt, it cannot be returned.

3. Enclose a typed or clearly written description of the problem 

you are having with your unit, plus the name and address where 
you want the unit returned.

4. Pack the unit securely to prevent damage during transit. If possible, 

use the original packing materials.

5. Ship prepaid and insured using a traceable carrier such as United Parcel

Service (UPS), Federal Express, or Priority mail with delivery confirmation.
Ship to: Cobra Factory Service, Cobra Electronics Corporation, 6500 West
Cortland Street, Chicago, IL 60707 U.S.A.

6. Please allow three (3) to four (4) weeks before contacting us about 

the status of your service. Call 773-889-3087 for assistance. If your 
unit is under warranty, it will either be repaired or replaced upon receipt,
depending on the model. If your unit is out of warranty, you will receive 
a letter informing you of the repair or replacement charge.

Trademark Acknowledgement

Cobra, 6 Band, DigiView, Extra Sensory Detection, HighGear, microTALK,
LaserEye, Safety Alert Traffic Warning System, Strobe Alert, VG-2 Alert 
and Nothing comes close to a Cobra are registered trademarks of 
Cobra Electronics Corporation.

Cobra Electronics Corporation, 11 Band, EasySet, IntelliMute, IntelliShield,
Road Ready, SmartPower, Spectre Alert, UltraBright, Voice Alert and Xtreme
Range Superheterodyne are trademarks of Cobra Electronics Corporation.

Opticom is a trademark of 3M Corporation. Instaclear for Ford is a 
registered trademark of Ford Motor Company, Inc. Electriclear for GM 
is a registered trademark of General Motors Corporation. 20-20 and 
Ultra-Lyte are trademarks of Laser Technology, Inc. ProLaser and 
ProLaser III are trademarks of Kustom Signals, Inc. Bee III and Pop 
are a trademarks of MPH Industries. Spectre is a trademark of Stalcar.
Interceptor VG-2 is a trademark of TechniSonic Industries LTD. 
Tomar is a registered trademark of TOMAR Electronics, Inc.

 

 


background image

Order Form

Nothing comes close to a Cobra

®

25

Customer Assistance

Order Form

Name

Address (No P.O. Boxes)

City

State/Province

Zip

Country

Telephone

Credit Card Number         Type:

Visa   

MasterCard   

Discover

Exp. Date

Customer Signature

Item #

Description

U.S. Cost Each

Qty

Amount

420-030-N-001

Straight 12V Power Cord

420-026-N-001

Coiled 12V Power Cord

545-139-N-001

Windshield Mounting Bracket

CLP-2B

Dual Port Power Adapter

U.S. Subtotal

(Tax if Applicable)

Shipping/Handling

Total

Ordering From U.S.A.

Call 773-889-3087 for pricing or visit www.cobra.com.

For Credit Card Orders
Complete and return this order form to fax number 773-622-2269. Or call 773-889-3087
[Press one (1) from the main menu] 8:00 a.m. to 6:00 p.m. CT, Monday through Friday.

Make Check or Money Order Payable To
Cobra Electronics, Attn: Accessories Dept., 
6500 West Cortland Street, Chicago, IL 60707 U.S.A.

To Order Online
Please visit our website: www.cobra.com

Amount Shipping/Handling*
$10.00 or less . . . . . $3.00
$10.01-$25.00 . . . . . $5.50
$25.01-$50.00 . . . . . $7.50
$50.01-$90.00 . . . . $10.50
$90.01-$130.00 . . . $13.50
$130.01-$200.00 . . $16.50
$200.01 plus . . . . . 10% of

purchase

Tax Table

Wisconsin add 5%

Indiana, Michigan, 
Ohio add 6%
California add 7.25%
Illinois add 8.75% 

*For AK, HI and PR add additional $26.95 for FedEx Next Day or 

$10.95 for FedEx 2nd Day. Excludes weekends and holidays shipments.
Please allow two (2) to three (3) weeks for delivery in the U.S.A. 
Prices subject to change without notice.

Optional Accessories

24 English

Optional Accessories

You can find quality Cobra products and accessories 
at your local Cobra dealer, or in the U.S.A., you can 
order directly from Cobra.

Windshield Mounting Bracket

Includes suction cups
Item # 545-139-N-001

Straight 12V DC Power Cord

Includes plug and fuse
Item # 420-030-N-001

Coiled 12V DC Power Cord

Includes plug and fuse
Item # 420-026-N-001

Dual Port Power Adapter

Includes adjustable plug 
(up to 90˚) and fuse  
Item # CLP-2B

Customer Assistance

 


background image

Nothing comes close to a Cobra

®

English

For more information or to 

order any of our products, 

please visit our website:

www.cobra.com

CB Radios

microTALK

®

Radios

Radar/Laser Detectors 

Safety Alert

®

Traffic Warning Systems

Accessories 

GPS (Global Positioning System)

HighGear

®

Accessories  

CobraMarine

VHF Radios  

Power Inverters

The Cobra line of quality products includes: