PDF User Manual

  1. Home
  2. Manuals
  3. Cobra CWA BT150 Quick Start Manual

Cobra CWA BT150 Quick Start Manual

Made by: Cobra
Type: Quick Start Guide
Category: Cell Phone Accessories
Pages: 2
Size: 0.62 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

1.

  Connect one 3.5mm end of the 

included audio cable to the head-
phone jack of the Cobra

AirWave

.

2.

  Connect the other end (3.5mm or 

2xRCA) to an audio input on your 
home stereo system. 

3.

  Slide power switch from OFF to 

ON

Connect the micro-USB adapter 
cable to the Cobra

AirWave

 and  

plug into USB-compatible power port.

4.

  The blue LED light will flash to indicate the unit is powered 

and is now ready to be paired to your media device.

Quick Start Guide

Printed in China   Part No. 480-827-P Version B

Thank you for purchasing the Cobra

AirWave

 Wireless

  

Music Receiver. 
Cobra

AirWave

 lets you...

•  Play any media device enabled with 

Bluetooth

®

  

wireless technology through your home stereo,  

car stereo or music dock.

•  Control your music directly from your media device.
•  Connect a media device without ever going near  

the stereo.

•  Stay connected virtually anywhere in your home with a 

Bluetooth

® 

wireless range of 33 feet.

What’s in the Box

Setting Up 

Cobra

AirWave

Pairing Your Cobra

AirWave

3.5mm-3.5mm
Stereo Cable

3.5mm-RCA
Stereo Cable

Cobra AirWave

 

Bluetooth

®

 Receiver

Micro-USB Cable 
for Charging

Works with any 

Bluetooth

®

-Enabled Device

TM

In order to pair Cobra

AirWave

 to your media device, 

press the blue lighted button on Cobra

AirWave

™ 

for 3 

seconds to put it into pairing mode. Go to the 

Bluetooth

®

 

Settings Menu on your media device.  For most devices 
this is found by pressing 

Settings

 

Bluetooth

®

.  

Press 

Scan for Devices

 and/or wait for the device list to 

populate and then select Cobra

AirWave

.

Pairing can take up to 30 seconds.  If you are prompted 
to “Accept password to pair” press 

Confirm

.  When 

Cobra

AirWave

™  

is properly paired and connected,  

“Connected” will be shown on your media device. 

When Cobra

AirWave

 is properly paired and connected to 

your device the LED on the top of the unit will shine 

blue

.

For more information on pairing with 

Bluetooth

®

 devices 

consult your device’s owners manual.

If you are having trouble initializing or maintaining your  

Bluetooth

®

 connection, completely turn off your media device 

and Cobra

AirWave

 device, wait 30 seconds, and then turn 

them back on.  

Now that you are paired with and connected to  
Cobra

AirWave

 you’re ready to start streaming music.

Your Cobra

AirWave

  is now connected and ready to play 

music! Just play music on your device as you normally 
would and the sound will come out of your speakers!
Keep in mind that the Cobra

AirWave

 has a  

33-foot range.

Reconnecting Your Device

If you move out of range or turn off the 

Bluetooth

®

 feature 

on your device, the Cobra

AirWave

 will disconnect from 

your device. To reconnect, simply access the 

Bluetooth

®

 

Manager on your device and select the Cobra

AirWave

  

device listed. 

Changing Connected Devices

If you want to switch from one device to another:

1.  End the existing 

Bluetooth

®

 connection with the  

connected device accessing the 

Bluetooth

®

 Manager 

and disable the 

Bluetooth

®

 function of the device.

2.  The Cobra

AirWave

 can now be connected to a  

different media device. Follow the instructions in “

Pairing 

Your

 Cobra

AirWave

” for new media devices, or connect 

to Cobra

AirWave

™ 

via the media device’s 

Bluetooth

® 

manager for previously paired devices.

AIRWAVE_QSG_vB.indd   1

4/2/13   5:47 PM

 


background image

Out of Range or Lost Signal

If the media device is out of range (beyond 33 feet) of the 
Cobra

AirWave

 or if there is something blocking the 

Bluetooth

®

 signal, the blue LED light will flash to indicate 

that the 

Bluetooth

®

 connection with the music device has 

been lost. To avoid a lost connection:

1.

  Move the media device back into range (within 33 

feet), and/or make sure there’s a clear line of sight and 
that there are no obstructions between the receiver 
and the media device.

2.

  Within 15 seconds, the connection will automatically 

be re-established and the blue LED light will turn on.

3.

  If the connection is lost for more than 45 minutes, 

the connection will need to be re-established.  
Follow the directions in “

Reconnecting Your 

Device

”.

Troubleshooting

You can quickly resolve most problems with your  
Cobra

AirWave

 by following the advice in this section.

Music is not coming out of the stereo speakers.

Solutions:
•  Make sure the Cobra

AirWave

 is powered or  

battery is sufficiently charged.

•  Make sure an audio cable is correctly and firmly 

connected to Cobra

AirWave

 .

•  Make sure one of two supplied audio cables is  

correctly connected to the receiver and the stereo.

•  Make sure the stereo is powered on.
•  Make sure the stereo volume is set to a 

comfortable listening level.

•  Make sure the audio level on media device is not  

muted or too low.

•  Make sure you are within range of the Cobra

AirWave

 

Receiver, and that your media device is connected 
via 

Bluetooth

®

 technology with the receiver.

For more information on Cobra

AirWave

 and other 

Cobra products, please go to 

www.cobra.com.

Blue LED

Slow Flash 

Passive Discovery

Medium Flash  Pairing Mode
Fast Flash 

Auto-Reconnect Mode (When media  

 

device is not connected press top  

 

button to Activate)

Solid  

Connected

Play/Pause 

When Connected press Top button  

 

for “Play/Pause”

Red LED

USB Powered

Power Switch is

 

ON

:

LED On 

Always

Power Switch is

 

OFF:

LED On 

Battery Charging

LED Off 

Battery Fully Charged

Battery Powered

Power Switch is

 

ON:

LED On 

Battery Sufficiently Charged

LED Flashing  Low Battery
LED Off 

Dead Battery

Power Switch is

 

OFF:

LED Off 

Always

LEDs

FCC & Industry Canada Statement 

For Products Purchased in USA: 

NOTE:

 This device complies with part 15 of FCC rules: Operation is subject to the following  

two conditions: (1) This device may not cause harmful interference, and (2) This device must  

accept any interference received including interference that may cause undesired operation.

CAUTION:

 Modifications or parts not approved by Cobra Electronics Corporation may  

violate FCC Rules and void authority to operate this equipment.

For Products Purchased in Canada:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject 

to the following two conditions: (1) this device may not cause interference, and (2) this device must 

accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 

environment. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry 

Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that 

may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne 

doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélec-

trique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

NOTE: 

The manufacturer is not responsible for any radio or TV interference caused by unauthorized 

modifications or changes to this equipment. Such modifications or changes could void the user’s 

authority to operate the equipment.
This equipment is portable device. The output power of this device is less than 20mW.The SAR test 

is not required.

NOTE: 

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation. This equipment generates uses and 

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the following measures:

-  Reorient or relocate the receiving antenna.
-  Increase the separation between the equipment and receiver.
-  Connect the equipment into an outlet on a circuit different from that to which the  

 

  receiver is connected.
-  Consult the dealer or an experienced radio/TV technician for help

Trademark Statement 

Cobra

®

 and the snake design are registered trademarks of Cobra Electronics Corporation, USA. 

Cobra AirWave™ and Cobra Electronics Corporation™ are trademarks of Cobra Electronics 

Corporation, USA. 
The Bluetooth

®

 word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use of 

such marks by Cobra Electronics Corporation is under license.

AIRWAVE_QSG_vB.indd   2

4/2/13   5:47 PM