Full Text Searchable PDF User Manual
RACE PLATES
CONTENT
01
Safety
02
Symbols Used
02
Tools Required
03
Front Race Plate Installation
07
Side Race Plates Installation
01
SAFETY
NOTE: We strongly urge you to read this Assembly Manual in its entirety first. Refer to the
appropriate sections for any issue which you don’t completely
understand. Please note that not all Raceplates have the features described in
this Assembly Manual.
02
1
2
3
L=R
DETAIL
The threads
Overtightened
are stripped.
Use wrench
Tighten screw
gently
Correct
Wrong
Assemble in the
specified order
Assemble the same
for the other side
Pay attention here
Detail view
Assembly view
SYMBOLS USED
TOOLS REQUIRED
Wrench: 10:0 (mm)
(Optional)
Scissor
Allen: 2.0, 4.0, 5.0 (mm)
Adjustable Wrench
03
Wrench: 10.0(mm)
(Optional)
1
2
3
FRONT FENDER
NO.
DESCRIPTION
1
Front Race Plate (x1)
2
Front Race Plate Bracket (x2)
3
Hex Socket Head Allen Bolt M3* (x2)
4
Washer M3* (x2)
5
Nut M3* (x2)
6
Hex Socket Head Allen Bolt M6* (x4)
7
Nut M6* (x2)
8
Washer M6* (x2)
DETAIL
Allen: 2.0,4.0 &
5.0(mm)
Adjustable Wrench
Scissors
TOOL REQUIRED
Front Race Plate Bracket (x2)
Washer And Nut M3* (x4)
Hex Socket Head Allen Bolt M3* (x4)
Position the Brackets with the Front Race Plate
DETAIL
8
7
6
4
5
FRONT RACE PLATE INSTALLATION
04
Washer And Nut M3* (x1)
Hex Socket Head Allen Bolt M3* (x1)
DETAIL
DETAIL
FRONT RACE PLATE INSTALLATION
Bolt through the Hex Socket Head Allen Bolt M3* with a Washer M3* into the Front Race
Plate and tighten with a Nut M3* using an Allen Key 2.0 and an Adjustable Wrench
Do the same for the other three holes
L=R
05
Washer And Nut M6* (x1)
Hex Socket Head Allen Bolt M6* (x1)
DETAIL
Bolt through the Hex Socket Head Allen Bolt M6* with a Washer
M6* into the top crown of the fork and then through bracket
DETAIL
Do the same for the bottom crown of thje fork
L=R
FRONT RACE PLATE INSTALLATION
06
DETAIL
Tighten with a Nut M6* using an Allen Key 5.0 and a
10.0(mm) Wrench
DETAIL
Do the same for the rest of the mounting points
L=R
FRONT RACE PLATE INSTALLATION
07
1
FRONT FENDER
NO.
DESCRIPTION
1
Left Side Race Plate (x1)
2
Right Side Race Plate (x1)
3
Left Side Race Plate Bracket (x1)
4
Right Side Race Plate Bracket (x1)
5
Hex Socket Head Allen Bolt M6* (x4)
6
Washer M6* (x4)
7
Nut M6* (x4)
DETAIL
Allen:4.0 & 5.0(mm)
Scissors
TOOL REQUIRED
Washer And Nut M6* (x1)
Hex Socket Head Allen Bolt M6* (x1)
Position the Bracket with the Side Race Plate (Right side)
DETAIL
3
4
2
5
6
7
SIDE RACE PLATES INSTALLATION
Wrench: 10.0(mm)
(Optional)
08
Bolt through the Hex Socket Head Allen Bolt M6* with a Washer
M6* into the Right Side Race Plate and then through the Bracket
DETAIL
Remove the M6* Bolt from the Buzzraw’s top tube using an Allen Key 5.0
DETAIL
SIDE RACE PLATES INSTALLATION
09
SIDE RACE PLATES INSTALLATION
Tighten the M6* Bolt through the Race Plate Bracket then onto the
Buzzraw’s top tube using an Allen Key 5.0
DETAIL
10
DETAIL
Bolt through the Hex Socket Head Allen Bolt M6* with a Washer M6* into
the Right Side Race Plate onto the Buzzraw using a Allen Key 5.0
DETAIL
SIDE RACE PLATES INSTALLATION
Washer M6* (x1)
Hex Socket Head Allen Bolt M6* (x1)
Do the same for the Left Side Race Plate
L=R
11
DETAIL
DETAIL
SIDE RACE PLATES INSTALLATION
