PDF User Manual

  1. Home
  2. Manuals
  3. Club Telco Netgear DM11PSP Reference Manual

Club Telco Netgear DM11PSP Reference Manual

Made by: Club Telco
Type: Reference Guide
Category: Modem
Pages: 8
Size: 1.93 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Broadband Setup

Netgear DM11PSP

 


background image

Broadband Setup Netgear DM11PSP

Modem Light Status

On the front of your modem you will notice a number of lights, the below table explains 

what each of these lights mean:

Label Action  Description

[A] Power

 

Off

 

Power is off 

 

Solid Red

 

Modem is initialising 

 

Solid Green

 

Power is on

[B] Ethernet

 

Off

 

No Ethernet connection 

 

Solid Green

 

Connected via Ethernet 

 

Blinking Green

 

Data flow

[C] DSL

 

Off

 

No DSL signal 

 

Solid Green

 

DSL signal established 

 

Blinking Green

 

Establishing DSL signal

[D] Internet

 

Off

 

No internet connection 

 

Solid Green

 

Internet is connected 

 

Blinking Green

 

Data flow

[A]

[B]

[C]

[D]

Modem Reference Guide

 


background image

Broadband Setup Netgear DM11PSP

Requirements

1.

  Any operating system is compatible however, depending on the version this may affect 

your internet experience.

2.

 Internet Explorer 6.0 or higher/Firefox 2.0 or higher.

3.

 Ethernet network adapter.

Connecting the DM111PSP to your computer

1.

  Connect your network cable to the yellow port located at the back of the modem, and 

the other end will connect to your computer.

2.  

Connect a telephone cable to the grey port at the back of the modem, and connect the 

other end to your telephone wall socket. 

3.

  Finally, connect the power cable to your modem and the power adapter to your power 

point. Press the power button to the “ON” state.

The diagram below shows how the modem connects physically to your phone line, 

computer and power point.

 

4.

  Now that the modem is connected to your computer, phone line and powered on, you 

need to ensure that the lights on the modem indicate the following: 

Label Action

Power

 

Solid Green

Ethernet

   

Solid or Blinking  Green

DSL

 

Solid Green

Internet 

Off

Computer

Telephone  

socket

Power point

Setting Started

Getting Started (Cont.)

 


background image

Broadband Setup Netgear DM11PSP

Broadband Setup Netgear DM11PSP

You will also see a network icon appear in your task bar. You are now ready to setup your 

ClubTelco Internet connection. The image below shows the message box which should 

appear once the modem is connected and powered on.

 

Connecting Filters

Connecting a Central or Splitter Filter

This filter is used when you need to plug a phone and the ADSL modem in the same 

telephone wall socket.
There are 3 ports on the central filter as follows:

Line

   – This port connects to your telephone wall socket. 

ADSL

   – This port connects to the ADSL modem’s grey port. 

Phone

  –  This port connects to a telephone or other telephone device (for example a  

fax machine).

From diagram(1.1) below you can see the splitter (micro) filter acts as a double adapter and 

filter.

Connecting an Inline Filter

This filter is used on all phones, fax lines, etc.
An inline filter is placed between the telephony device and the telephone wall socket and 

should never be installed on the ADSL modem’s phone cable/connection.
Diagram (1.2) below shows that the inline filter only connects to your telephony devices.

Diagram (1.1) 

Diagram (1.2) 

Home Phone

Telephone 

Wall Socket

Modem

Micro filter

Phone Jack

ADSL Jack

Telephone 

Wall Socket

Home Phone

Modem

Microfilter

Phone Jack

Configuring Your Modem

 


background image

Broadband Setup Netgear DM11PSP

 Logging into your Modem

1. 

Open a web browser (usually Internet explorer) and in the address bar enter: 

http://192.168.0.1
2.

 You will be asked for a username and password, simply enter the follow details:

Username:

 admin 

Password: 

password

As pictured below you can see once the modem address (

http://192.168.0.1

) has been entered 

the login page will automatically appear.

 

Setting up your ClubTelco ADSL Broadband connection

1.  

Once you have logged into your modem on the left hand side of the screen click  

on 

ADSL Settings.

2.

 Under the heading 

ADSL Settings

 enter the follow settings:

• VPI:

 8 

• VCI:

 35 

• Protocol:

 PPPoE Bridging 

• Multiplexing Method:

 LLC BASED 

•  PPP Username:

 Simply enter your ClubTelco username but much like your email address, for 

example; johnsmith@ClubTelco.com.au

Configuring Your Modem (Cont.)

 


background image

Broadband Setup Netgear DM11PSP

3.

  Now click on the button labeled 

Apply

 located at the bottom of the page. Your modem will 

now save your settings.

4.

  Once the settings have saved you should see a 

Restart Now

 button appear on the same 

screen in the bottom left hand corner. Simply click on this and wait for the modem to  

reboot itself.

5.

  Once your modem has restarted, you should automatically connect to ClubTelco’s Internet 

service (this can take up to 5 minutes). If you can see the internet light is now solid green 

try browsing to a website such as

 www.google.com.au

 to test your connection.

Setting Up Wireless

username@clubtelco.com

 


background image

Broadband Setup Netgear DM11PSP

• PPP Password:

 Enter the password you’ve selected at sign-up 

• Disconnect if no activity (In minutes): 

0

3.

  Now click on the button labeled 

Apply

 located at the bottom of the page. Your modem will 

now save your settings.

4.

  Once the settings have saved you should see a 

Restart Now

 button appear on the same 

screen in the bottom left hand corner. Simply click on this and wait for the modem to  

reboot itself.

5.

  Once your modem has restarted, you should automatically connect to ClubTelco’s Internet 

service (this can take up to 5 minutes). If you can see the internet light is now solid green try 

browsing to a website such as

 www.google.com.au

 to test your connection.

Email Setup

To check your ClubTelco email account you can go to 

http://www.clubtelco.com/support.html

 

and under the Login section in the upper left hand side enter your username and password 

then click the Webmail button.
Alternatively if you wish to setup your ClubTelco email address on your computer please go to:  

http://www.clubtelco.com/support.html 

and under the Email heading in Self Service select 

Email Setup Guides and the mail client you are 

using.

Homepage setup

1. If you wish to setup your Homepage simply 

open Internet Explorer and select Tools from the 

menu selection at the top, and click on Internet 

Options.
2. Within Internet Options under the General tab 

click in the address bar below the Homepage 

heading and enter 

http://www.clubtelco.com 

or 

the website of your choice. Click OK to complete 

the setup.

FAQ & Troubleshooting Tips

http://www.clubtelco.com

 


background image

Broadband Setup Netgear DM11PSP

Call 13 TELCO

 (13 8352)

Between 9am - 10pm Monday to Friday

Between 8am - 4pm Saturday & Sunday

Email: 

support@clubtelco.com