CloudWalker CLOUD TV 55SU User Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

User Manual

CLOUD TV 65SU

LED TV

Design and Specification are subject to change without prior notice

Thank you for purchasing CloudWalker LED TV. Please

free to reach out to us for any

service related query/complaints or for any feedback/suggesstions on the contact details

mentioned below for your CloudWalker LED TV. We'd like to hear from you!

feel

www.cloudwalker.tv

Head Office:

CloudWalker Streaming Technologies Pvt Ltd, A-503, Business Suite 9, S.V. Road, Santacruz West, Mumbai-400 054

CloudWalker Streaming Technologies Pvt. Ltd.

(We are open from 9:30 am to 6:00 pm,
Monday to Saturday)

CLOUD TV 55SU

For Installations & demo, please call on our

Toll Free No:

1800 102 3647

For any queries/suggestions,

write to us at:

customercare@cloudwalker.tv

Thank you for purchasing CloudWalker LED TV.

The instructions in this manual are described mainly with the remote control.

You can also use the buttons on the TV if they have the same names as those on the
remote control.

To obtain the best performance and safety, please read this manual carefully.

Please keep this manual for future reference.

Important Safety Instructions

Supplied Accessories

Preparation

Functional Overview

Connections

Remote Control

Remote Control & Basic Operation

TV SETUP

My Media

APPS

Settings

CDE

Specification

Contenes

Home

To  reduce  the  risk  of  electric  shock,  do  not  remove  cover  (or  back).  No
user  serviceable  parts  inside.  Refer  servicing  to  qualified  service
personnel.  Indicates  a  situation  which,  if  not  avoided,  could  damage  the
equipment or other apparatus.

This symbol indicates dangerous voltage inside the TV that presents a risk
of electric shock or personal injury. Indicates a hazardous situation which,
if not avoided, could result in serious injury.

This symbol indicates important instructions accompanying the TV.

This equipment is a Class lI or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection
to electrical earth.

1. Read Instructions - All the safety and operating

instructions should be read before the product is
operated.

2. Retain Instructions - The safety and operating

instructions should be retained for future reference.

3. Heed Warnings - All warnings on the product and in

the operating instructions should be adhered to.

4. Follow Instructions - All operating and use

instructions should be followed.

5. Cleaning - Unplug the product from the wall outlet

before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a dry cloth for cleaning.

6. Attachments - Only use attachments / accessories

specified by the manufacturer.

7. Water and Moisture - Do not use the product near

water, for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, etc.

S. Accessories - Do not place the product on an

unstable  cart,  stand,  tripod,  bracket,  or  table.  The
product may fall, causing serious injury to a child or
adult, and serious damage to the product.  Use only
with  a  cart,  stand,  tripod,  bracket,  or  table
recommended by the manufacturer, or sold with the
product. Any  mounting  of  the  product  should  follow
the  manufacturer's  instructions  and  should  use  a
mounting  accessory  recommended  by  the
manufacturer.  The  product  and  cart  combination
should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the product
and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are

provided  for  ventilation  and  to  ensure  reliable
operation  of  the  product  and  to  protect  it  from
overheating,  and  these  openings  must  not  be
blocked or covered. The openings should never  be
blocked by placing the product on a bed, sofa, rug,
or  other  similar  surface. The  product  should  not  be
placed  in  a  built-in  installation  such  as  a  bookcase
or  rack  unless  proper  ventilation  is  provided  or  the
manufacturer's instructions have been adhered to.

10. Power Sources - The product should be operated

only from the type of power source indicated on the
marking label. lf you are not sure of the type of
power supply to your home, consult your appliance
dealer or local power company.

11. Power Cord Protection - Power cords should be

routed so that they are not likely to be walked on or
pinched  by  items  placed  upon  or  against  them,
paying  particular  attention  to  cords  at  plugs,
convenience  receptacles,  and  the  point  where  they
exit from the appliance.

12. Lightning - For added protection for the product

during a lightning storm, or when it is left

unattended  and  unused  for  long  periods  of  time,
unplug  it  from  the  wall  outlet  and  disconnect  the
antenna or cable system. This will prevent damage
to  the  product  due  to  lightning  and  power~line
surges.

13. Power Lines - An outside antenna system should

not  be  located  in  the  vicinity  of  overhead  power
lines  or  other  electric  light  or  power  circuits,  or
where  it  can  fall  into  such  power  lines  or  circuits.
When  installing  an  outside  antenna  system,
extreme  care  should  be  taken  to  keep  from
touching  such  power  lines  or  circuits  as    contact
with them might be fatal.

14. Overloading - Do nat overload wail outlets and

extension cords as this can result in a risk of fire or
electric shock.

15. Object and Liquid Entry - Never push objects of any

kind into the product through any openings as they
may touch dangerous voltage points or short-out
parts that can result in a fire or electric shock.
Never spill liquid of any kind on the product.

16. Servicing - Do not attempt to service the product

yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.

17. Repairing - Unplug the product from the wall outlet

and refer servicing to qualified service personnel
under the following conditions:

a. When the power cord or plug is damaged.

b. If liquid has bean spilled, or objects have fallen

into the product.

c. If the product has been

exposed to rain or water.

d. If the product does not operate normally by

following the operating instructions. Adjust only those

controls  that  are  covered  by  the  operating
instructions  as  an  improper  adjustment  of  other
controls may result in damage and will often require
extensive  work  by  a  service  technician  to  restore
the product to its normal operation.

e. If the product has been dropped or damaged in

any way.

f. When the product exhibits a distinct change in

performance this indicates a need for service.

18. Replacement Parts - When replacement parts are

required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock or other hazards.

19. Safety Check - Upon completion of any service or

repairs to the product, ask the service technician to
perform safety checks to determine that the product
is in proper operating condition.

Important Safety Instructions

Sometimes, the LED screen may have some tiny
red, blue, white or black spots. This is normal
and does not affect the performance.

20. Heat - Do not install the product near any heat

sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.

21. Installation Location - Place the product on a firm

and flat surface. Avoid placing the product in areas
of  direct  sunlight,  heating  radiators,  closed
automobiles,  high  temperature,  high  humidity,
excessive  dust,  strong  vibration,  impact  or  strong
magnetic  fields,  as  the  internal  parts  may  be
seriously damaged.

22. Hazards of Electrical Shock and Fire - Do not touch

the power cord with wet hands. Hold the plug when
disconnecting the power cord. Do not pull the power
cord. Unplug the power cord from the wall outlet
when the product is not used for long periods of
time.

23. Hearing Safety - Listen at a moderate volume.

Using headphones at high volume can impair your
hearing.

24. Where the Mains plug is used as the disconnect

device, the disconnect device shall remain readily
operable.

25. The batteries (battery pack of batteries installed)

shall not be exposed to excessive heat such as
sunshine. fire or the like.

26. The apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.

Check the supplied accessories before installation.

In case of missing or damaged, please contact the dealer
immediately.

Remote Control x 1 Batteries x 2 User Manual x1

Stand x1 AV Cable(RCAx3) x1 Screws

Supplied Accessories

The type of power plug provided may be different from the above picture for some countries.
Please store the screws that are not used.

Preparation

Stand Installation

The TV base will be separated with the TV unit. You should install the base before you use the
TV unit.
1.Place the TV with its front side facing down on a cushioned flat surface.
2.Place the base on the hinge of TV unit, with the base direction shown under the base. (See
the picture)
3.Tighten the supplied screws to fix the TV stand securely in place. ( See the picture)

CLOUD TV 55SU

CLOUD TV 65SU

BM, 4X18 6PCS

The type of power plug provided may be different from the above picture for some countries.

10cm

30cm

Place the TV on a firm and flat surface, leaving a space of at least 10cm around the set and
30cm from the top of the set to the wall.

Connect the antenna cable into the antenna input terminal at the rear panel wall antenna
socket.

Connect the power plug into the wall outlet.

Positioning the TV set

Antenna and Power Connections

WARNING

The TV stand may not be securely fixed in place after repeated tightening and loosening the screws.

During assembling and disassembling the TV stand, please use your hand to support it. Failing to do
so may cause the TV stand to fall and result in personal injury.

After installing the TV stand, please ensure that the screws are tightened firmly. Failure to do so may
cause the TV set to tip over or become damage.

Functional Overview

Front and Side Panel

1. Power Light

On Standby Mode, the light turns red.

2. Infrared Remote Sensor

Receives the signals from the remote control.

3. POWER

Press to turn TV on or turn to standby mode.

4. MENU

Press to display the setup menu on the TV screen.

5. SOURCE

Press to select TV or all video input modes.

6-7. VOL+, VOL-

Press to adjust the volume level, or press to select or adjust a menu item.

8-9. CH+, CH-

Press to select desired channels, or press to select or adjust a menu item.

MENU SOURCE

CLOUD TV 55SU
CLOUD TV 65SU

Rear Panel

Functional Overview

USB2.0

USB3.0

RF IN

HDMI2

HDMI1

HDMI3

LINE IN

YPBPR IN

VGA

RJ 45

CVBS

AV IN

COAXIAL

CLOUD TV 55SU

EARPHONE

Connects audio amplifier or other device
with that audio input.

RJ45 Ethernet

Connect to the Internet.

LINE IN Input terminal

Connect to equipment using HDMI-DVI
connection or PC with audio output.

VGA(PC IN) Input terminal

Connect to PC.

YPBPR Input terminals

Connect to equipment with component
video output.

AV IN

Video and Audio(L/R)input Terminal

Audio(L/R)can be used as YPBPR Audio
input.

COAX

Connection for Digital Coaxial input for
Audio Amplifier.

HDMI1/HDM2/HDM3 Input terminal

Connect to equipment with HDMI output.

Antenna lnput terminal

Connect to equipment with antenna
output or wall antenna socket.

USB

Connect your external storage devices.

CLOUD TV 65SU

You can connect VCR, DVD player, set-top box, computer or other video equipment to the TV.
To view external source images, press to select the input source.

Connecting an AV Equipment with HDMI Connector

Connections

Computer

VCR

Connecting an AV Equipment with Composite Connector

Connecting an AV Equipment with Composite(YPbPr) Connector

Connecting an AV Equipment with VGA Connector

Set-Top Box

If the external equipment has DVI output, you can connect it to the HDMI terminal using a
HDMI-DVI cable. In case of using the HDMI-DVI cable, connect analog audio signal to
RGB/HDMI Audio Input terminal.
Please refer to the user manual of t he external equipment for more information on the
connection to the TV.
Please disconnect all the power supplies to the equipment and TV before connection.

HDMI

CDE

SETTINGS

SOURCE

ATV

SCREENSHOT

TV ON/OFF

PICTURE MODE

INPUT SOURCE

HDMI SOURCE

INFORMATION

ALL APPS

AIRMOUSE ON/OFF

CHANNEL UP/DOWN

VOLUME UP/DOWN

NETWORK
IMAGE

VIDEO

SUBTITLE

MUTE

SOUND MODE
ASPECT RATIO

AV SOURCE

ATV SOURCE

SETTINGS

SCREENSHOT

PREVIOUS CHANNEL

NOT AVAILABLE

BACK/RETURN

HOME

CDE
MENU

NUMBER

MUSIC

SLEEP TIME
AUDIO

NAVIGATE ARROW

PLAY / PAUSE

FAST REVERSE

FAST FORWARD

STOP

NOT AVAILABLE

Remote Control

It takes approximately 10 seconds for the picture to appear after the TV is turned on.
The TV will switch to standby mode automatically if there is no signal input for 10 minutes.
If the TV will not be used for a long periods of time, unplug the TV from the wall outlet.

Remote Control & Basic Operation

1. Open the battery cover.
2. Insert batteries (two size-AAA batteries).
Place batteries with their terminals observing the(+) and (-) indications.
3. Replace the cover and press down until the lock snaps closed.
If the remote control is not used for an extended period of time, remove

the batteries from the remote control as damage may result due to
electrolyte leakage from the batteries.

Installing The Remote Control Batteries

Basic Operation

Select Input Source

You can select the source by pressing the SOURCE button on the side of the panel or
pressing the SOURCE button on the remote control. Press button to select the input source
you want to watch. Then press ENTER to confirm.

On-Screen Display (OSD) Selection and Adjustment

1. Press "MENU" to display the main menu.
2. Press to select a menu. The selected menu page displays.
3. Press to set your selection.
4. Press to choose an item on the menu page and press to set your selection.
5. Press to adjust an item value or choose options.
6.Press "MENU" to return to the menu, press "MENU" again to exit.

The OSD menu screen will be closed automatically when no operation has been made for
the set OSD menu display time.

Note:

1.The batteries shall not be exposed to excessive heat such as sunshine and fire.

2.Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
3.Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries
according to the instructions.
4.Do not dispose of batteries in a fire, danger of explosion.

Power On/Off
Turning on the TV

1. Plug the TV’s power cord into a wall outlet (after this step, the main unit will turn on and enter
standby mode automatically).
2. Press the (Power) button on the TV, or press the (Power) button on the remote control. The
TV will turn on.

Placing In Standby Mode

Your TV can be placed in Standby mode in order to reduce the power consumption,
The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal,
for example).
1, Press the Power button.
2. To switch back on, simply press power button.

Remark:

Do not leave your TV in Standby mode for long periods of time. (when you are away

on holiday, for example). It is the best to unplug the set from the ma/ns and aerial.

(1) Power: ON/OFF
(2) Menu: If

there’s

display, enter the

menu;

Press <EXIT>,

return

exit

to.

(3)

Channel: When

operating

the

menu, you

can

select

the

channel

pressing

down

menu.

(4)

Volume: When

operating

the

menu, you

can select

the

volume

pressing

left

right.

(5)

Enter: Channel-switch; when

operating

the

menu, you

can

enter

the

pressing <ENTER>.

SETUP

Key

Function

Description

Picture

Setup

Press <Menu> to

display

the

main

menu,

then

press

select

the

Picture

setup, press

select

the corresponding

sub-menu, press <Menu>

return

press <Exit>

exit

the

menu.

Picture

Mode:

Includes

standard,

Dynamic, soft

and

user

four

modes,

the

parameters

brightness,

contrast, Saturation,

Hue

and

sharpness

effect

can

adjusted

Color

Temp: To

set

the

color

temperature

mat

you

feel

comfortable, including

standard,

cool

and

warm

modes.

Digital

Noise

Reduction(DNR):

improve

the

quality

reducing

noise

divided

into low,

middle

and

high.

Dynamic

Contrast(DCR):

improve

Dynamic

Contrast

the

picture

Display

Mode: To

select the

preferential

aspect ratio

mode, including 16:9,

4:3, zoom 1,

zoom

2 modes.

Sound Setup

Press <Menu> to

display

the

main

menu,

then

press

select

the

Sound

setup, press

select

the corresponding

sub-menu, press <Menu>

return

press <Exit>

exit

the

menu.

Sound Mode:

Includes

standard,

news, music, movie, and user mode.

Sound Mode:

When the user mode is set, you can select your favorite sound by different level of

treble, bass and balance.
Auto Volume Concierge(AVC): When it is set as ON, the speaker volume will be limited
automatically.

Menu Operation

Channel Setup

Channel setting is only displayed in the analog TV channels. Press <Menu> to

display

the

main

menu,

then

press

select

the Channel

setup, press to

select

the corresponding

sub-menu, press <Menu>

return

press <Exit>

exit

the

menu.

Skip: You can mark channel as the “skip-channel” from the channel list, and this channel will not
be displayed when switching channels if the skip function is ON.
Color system: To select the TV signal scanning system, including PAL and NTSC two systems.
Audio System: To select television signal audio system, including the I, BG, M and DK four
systems.
Fine Tune: Based on the current channel, make a small adjustment by upward or downward.
Manual search: Searching for an effective program channels automatically. If you want to stop the
search. press <ENTER> key during the search process.
AUTO search: Based on the current channel, search program channels by upward or downward.
Press searching downward, press key searching upward. If you want to stop the search,
press <return> during the search process.
Channel Edit: These four buttons (red, green, the yellow and the blue button) are shortcut keys to
edit the program. Press the to select the channel you want to operate, then you could delete,
move, skip and rename the selected channel.

Menu Operation

Advance

Press <Menu> to

display

the

main

menu,

then

press

select

the

Advance, press

select

the corresponding

sub-menu, press <Menu>

return

press <Exit>

exit

the

menu.

Audio only: When you turn on the listen alone function, you could only listen the sounds from the
TV while the screen is closed.
Blue screen: Press buttons to select the On/Off.

▲

Time

Setup

Press <Menu> to

display

the

main

menu,

then

press

select

the

Time Setup,, press

select

the corresponding

sub-menu, press <Menu>

return

press <Exit>

exit

the

menu.

Menu display time: includes 10s, 15s, 20s, 25s, 30s and off.
Sleep time: System Sleep Time can be adjusted.
It includes 10m, 30m, 45m, 60m, 90m, 120m, 240m and off.

▲

Play your movies, music and photos directly on the TV from your external storage devices.

Media center

My Media

Menu Operation

Watch Live TV (Cable/DTH), stream content from internet & access Apps

Menu Operation

Videos

Click “Videos” from “My Media” and use the navigation keys on your remote to select the
video file you want to play.

Click “Music” from “My Media” and use the navigation keys on your remote to select the
music/audio file you want to play.

Music

Home

APPS

Click “All Apps” to access your apps. To make an app shortcut click on “+Add” icon.

Menu Operation

Click “Images” from “My Media” and use the navigation keys on your remote to select the
photo/image you want to view.

Images

Menu Operation

Settings

CDE

Simply search for your favourite videos online & enjoy watching them on your TV.

Specifications

3840 X2160

(

True

Display

)

07B

(

Dithered

10bits

)

Specifications

Ask a Question ?