Full Text Searchable PDF User Manual
CE-955-CAM-WD
1
High Resolution Color Wide Dynamic Dome Camera
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
◆
Do NOT use power sources other than class 2 power.
◆
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
2
High Resolution Color Wide Dynamic Dome Camera
3
High Resolution Color Wide Dynamic Dome Camera
Menu Flow
■
Setup Page Menu
ㆍ
PRESETS
ㆍ
WHITE BALANCE
ㆍ
AGC (Auto Gain Control)
ㆍ
EXIT
14
17
■
Advanced Page Menu
23
17
ㆍ
LENS
18
18
19
19
ㆍ
VIDEO STANDARD
ㆍ
SYNC
ㆍ
SHARPNESS
ㆍ
APERTURE
23
23
24
24
■
Special Page Menu
20
ㆍ
CAMERA ID
ㆍ
FLIP
ㆍ
BACKLIGHT
ㆍ
RESOLUTION
ㆍ
SAVE / RESTORE
20
21
21
22
22
Troubleshooting
25
Specifications
27
Features
Warnings and Precautions
Names and Functions of Parts
Installation
Dimensions
Cable Connections
■
Lens
■
OSD
■
VBS-EXTRA
■
3 Axis Bracket
■
SMPS
4
5
9
12
12
13
10
10
11
11
11
Components
8
■
Contents
4
High Resolution Color Wide Dynamic Dome Camera
5
High Resolution Color Wide Dynamic Dome Camera
■
Features
Warning
■
Wide Dynamic Range (WDR)
The camera delivers clear, high quality
pictures even in backlight, by increasing
exposure in dark areas while decreasing
it in bright areas;
a corrected image with clear details results.
ㆍ
120dB maximum dynamic range
High Resolution color for crisp,
clear video
ㆍ
540TV Line : High resolution mode
High Sensitivity for low-light
images
The built-in high sensitivity
PIXIM BELUGA C-MOS enables
a clear image even at 0.08Lux
Additional Functions
ㆍ
Automatic White Balance
ㆍ
Backlight Compensation
ㆍ
Automatic Gain Control
DNR (Digital Noise Reduction)
The amount of low illuminance noise has
been significantly reduced, and the signal-
to-noise ratio (S/N ratio) as well as horizontal
resolution have been improved, resulting
in a clear and sharp image display even
in the dark.
Controlled by OSD Menu
The camera can be controlled by selecting
text displayed on the monitor screen.
Day & Night
The camera identifies whether it is day
or night and automatically switches to the
appropriate mode, depending on its
environment. By day, the camera switches
to color mode in order to maintain optimal
color. At night, it switches to B/W mode
so as to obtain better picture definition.
3 Axis built-in 120mm Dome Housing
The camera requires periodic inspection.
Contact an authorised technician to carry out the inspection.
Stop using your camera when you find it malfunctioning.
If the camera emits smoke or is unusually hot for a long period, a fire may
be caused.
Do not Install the camera on a surface that can not support it.
If the camera is installed on an inappropriate surface, it may fall
and cause injury.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not dis-assemble the camera.
It may result in an electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in a fire or other hazards.
6
High Resolution Color Wide Dynamic Dome Camera
7
High Resolution Color Wide Dynamic Dome Camera
■
Precautions
Do not install the camera in
extreme temperature conditions.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
Only use the camera under conditions
where temperatures are between
-10
˚
C and +50
˚
C. Be especially
careful to provide ventilation when
operating under high temperatures.
It can cause the image quality to be
poor.
Severe lighting change or flicker can
cause the camera to work improperly.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not install or use the camera in an
environment where the humidity is high.
¥ If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
¥ Please check that the power satisfies the normal specification before
connecting the camera.
It can cause malfunctions to occur.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that
corrode the electronic components.
If exposed to radioactivity the CCD
will fail.
It can damage the CCD.
Do not drop the camera or protect
it from physical shocks.
Do not expose the camera to rain
or spill beverage on it.
Do not expose the camera to
radioactivity.
Never keep the camera pointed
directly at strong light.
8
High Resolution Color Wide Dynamic Dome Camera
9
High Resolution Color Wide Dynamic Dome Camera
1. COLOR DOME CAMERA
2. SCREWS
3. WIRE FOR VBS-EXTRA
4. INSTRUCTION GUIDE
■
Components
Names and Functions of Parts
■
10
High Resolution Color Wide Dynamic Dome Camera
11
High Resolution Color Wide Dynamic Dome Camera
■
Names and Functions of Parts
Names and Functions of Parts
■
②
OSD PCB
●
Jog Shuttle Switch
③
VBS-EXTRA FOR CONNECTING TO LCD
Please use the supplied wire when connecting to LCD
VBS-EXTRA
④
3 AXIS BRACKET
Please loosen screws and fix tilted and panned position.
⑤
SMPS PCB FOR DUAL POWER
⑥
REMOTE CONTROLLER
-
Push button : Used for the menu display. This button can be used to
confirm settings after changing the value of the selected
function or current conditions.
①
LENS : Vari-Focal DC Auto Iris Lens
-
& : Used when changing item values, by moving the cursor to
the left or right on the menu screen.
-
& : Used for selecting items by moving the cursor up or down
on the menu screen
UP
DOWN
LEFT
RIGHT
●
SET
: Used to access menu mode and for configuration.
: Moves cursor up the menu screen.
: Moves cursor down the menu screen.
: Moves cursor left in the menu screen.
Parameter change
: Moves cursor right in the menu screen.
Parameter change
( Optional Item )
SET
12
High Resolution Color Wide Dynamic Dome Camera
13
High Resolution Color Wide Dynamic Dome Camera
■
Installation
■
Dimensions
Cable Connections
■
1. Dome Base Mounting
- Open the dome cover by loosening 3 screws using special wrench
provided.
- Mount the base of camera to a sturdy surface using 4 screws (1.5
inch) and 4 premade holes on the base of the dome.
2. Power Connect & Monitor Impedance
- DC12V/300mA regulated power supply (DC12V only)
AC24V Class 2 power supply (AC24V/DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75
Ω
. Check the impedance
switch when the screen turns blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction
and angle of camera.
- Make sure to retighten the screws for camera bracket.
- Set any function you wish to activate by using the OSD buttons.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten 3 screws.
DC only
AC24V/DC12V
AC IN
DC IN
AC IN
DC IN
VIDEO
POWER
120
Φ
140
Φ
111
16
27
(unit : mm)
60
Φ
DECORATION RING
DOME COVER
GIMBAL A'SSY
24V POWER BOARD
CONTROL BOARD
BASE HOUSING
14
High Resolution Color Wide Dynamic Dome Camera
15
High Resolution Color Wide Dynamic Dome Camera
Setup Page Menu
SETUP
PRESETS
BACKLIGHT..
CUSTOM..
INDOOR..
OUTDOOR..
NORMAL..
LENS
DC..
MANUAL
RED, BLUE
LOWLIMIT, HIGHTLIMIT
LOWLIMIT, HIGHTLIMIT
BIAS, LIMIT
WHITE BAL.
ATWDes..
MANUAL..
ATW..
AGC
MIDDLE
HIGH
OFF
LOW
SPECIAL..
EXIT
Special Page Menu
FLIP
OFF
HORIZ
VERT
BOTH
CAMERA ID
OFF
ON..
BACKLIGHT
OFF
ON..
ADVANCED SETUP..
SAVE / RESTORE..
RETURN
RESOLUTION
HIGH
NORMAL
SPECIAL
■
Menu Flow
Menu Flow
■
16
High Resolution Color Wide Dynamic Dome Camera
17
High Resolution Color Wide Dynamic Dome Camera
Advanced Page Menu
ADVANCED SETUP
SYNC
INT
LINELOCK
VIDEO STANDARD
NTSC
SETUP
VIDEO LEVEL
COLOR BAR
V PHASE
VERSION (D25_CLINTON_BELUGA)
RETURN
SHARPNESS
-8 --------------------- 8
-8 --------------------- 8
APERTURE
PRESETS
SETUP
PRESETS
BACKLIGHT
CUSTOM
INDOOR
OUTDOOR
NORMAL
LENS
DC
WHITE BAL
ATWDes
AGC
MIDDLE
SPECIAL..
AUTO
EXIT
INDOOR PRESET
> RETURN.
S-Normal / Shutter Pri
Preference = Shadows
Max DR = 16 bits
Max ESS = 2x
Max Gain = 20dB
ㆍ
Indoor : Indoor environment.
BACKLIGHT PRESET
> RETURN.
H-Extra High/Shutter Pri
Preference = Highlights
Max DR = 17 bits
ㆍ
Backlight : Backlight environment.
OUTDOOR PRESET
> RETURN.
H-High / Shutter Pri
Preference = Highlights
Max DR = 17 bits
Max ESS = 2x
Max Gain = 20dB
ㆍ
Outdoor : Outdoor environment.
CUSTOM
Custom.. informs the user that the
value of one or more properties in
the associated predefined presets
has change and no longer
matches any of the sets.
ㆍ
Custom : Custom setting mode.
NORMAL PRESET
> RETURN.
H-Normal / Shutter Pri
Preference = Highlights
Max DR = 14 bits
Max ESS = 2x
Max Gain = 20dB
ㆍ
Normal : Normal environment.
■
Menu Flow
Setup Page Menu
■
18
High Resolution Color Wide Dynamic Dome Camera
19
High Resolution Color Wide Dynamic Dome Camera
■
Setup Page Menu
Setup Page Menu
■
LENS
WHITE BALANCE
AGC
EXIT
ㆍ
Lens
Choose the lens type DC and
Manual lens by using the
selector button.
DC MODE
BIAS
LIMIT
PREVIOUS PAGE
120
----------
----------
-18
-42
60
0
255
SETUP
PRESETS
NORMAL
LENS
DC..
MANUAL
WHITE BAL
ATW
AGC
MIDDLE
SPECIAL..
AUTO
EXIT
White Balance is a function which compensates different colors of light being
emitted from different light sources.
Users can select the above levels as they desire according to the environment.
ㆍ
ATW (Auto Tracking White Balance) The ATW mode continuously monitors
color temperature. With WB Control set to ATW, color temperature & White
balance can be automatically adjusted accordingly.
ATW CONTROL
PREVIOUS PAGE
LOWLIMIT
HIGHLIMIT
2500
-----------
-----------
8500
5.5K
11K
2K
5.5K
MANUAL WHITE BALANCE
PREVIOUS PAGE
RED
BLUE
-18
-----------
-----------
13
-20
20
-20
20
SETUP
PRESETS
NORMAL
LENS
DC
WHITE BAL
ATW
ATWDes
MANUAL
AGC
MIDDLE
SPECIAL..
AUTO
EXIT
ㆍ
ATW (Auto Tracking White Balance)
The limits of the color temperature setting remain 2000K and 11,000K
(eg, fluorescent light, outdoor, sodium vapour lamp etc.)
ㆍ
ATWDesat (ATW Desaturating)
When WB is set to ATWDesat, the Extended Color temperature is desaturated
i.e when there is a excess of light temperature, ATWDesat Function is used
as well as it reduces the Noise. The limits of the color temperature setting
remain 2000K and 11,000K
ㆍ
Manual (Manual White Balance)
Manual White Balance (MWB) Mode is used when other White Balance Options
are failed.
Saves all the setting menus and then exits.
SETUP
PRESETS
NORMAL
LENS
DC
WHITE BAL
ATW
AGC
MIDDLE
HIGH
OFF
LOW
SPECIAL..
EXIT
Automatic Gain Control is a feature which adjust automatically according to the
incoming Signal. By positioning the arrow to 'AGC' on the SETUP menu with the
help of UP and DOWN buttons, you can select the Mode you wish to go.
ㆍ
As the level of gain increases,
the screen gets brighter and the
level of noise also increases.
20
High Resolution Color Wide Dynamic Dome Camera
21
High Resolution Color Wide Dynamic Dome Camera
ㆍ
You can choose the ON and OFF
with the selector. If you select ON,
the entered camera ID is displayed
at the selected position in the video
picture (normal operation).
ㆍ
Please select the setup button while
in ON mode.
ㆍ
Select the desired position with the
selector.
①
Move the cursor to the letter
required by using the Set-Up button.
②
Select an ID from A,B~Y,Z, a,b~y,z
0,1~8,9 by using the LEFT and
RIGHT buttons.
③
Repeat the above steps until the ID
is complete.
①
Select the position where the ID
is to be displayed by using the
LEFT and RIGHT buttons.
User can enter a unique name for the respective camera.
The maximum length of the ID is ten characters.
CAMERA ID
CAMERA ID
ID
CAM-001
POSITION
UP-LEFT
PREVIOUS PAGE.
CAMERA ID
ID
CAM-001
POSITION
UP-LEFT
PREVIOUS PAGE
CAMERA ID
OFF
ON
FLIP
OFF
BACKLIGHT
OFF
RESOLUTION
HIGH
SAVE / RESTORE..
ADVANCED..
RETURN
SPECIAL
BACKLIGHT
CAMERA ID
OFF
FLIP
OFF
HORIZ
VERT
BOTH
BACKLIGHT
OFF
RESOLUTION
HIGH
SAVE / RESTORE
ADVANCED..
RETURN
SPECIAL
Backlight is feature of a Camera which compensates when there is a large
amount of background light.
ㆍ
When Backlight is ON, Back Light
gets activated.
ㆍ
White : BL-ZONE Position movement
Green : BL-ZONE Size enlargement
Red : BL-ZONE Size reduction
ㆍ
For BL-ZONE Confirm, long press
SET button
BL ZONE 1
CAMERA ID
OFF
MIRROR
OFF
BACKLIGHT
OFF
ON
RESOLUTION
HIGH
SAVE / RESTORE
ADVANCED..
RETURN
SPECIAL
FLIP
Select "OFF" to show the image as normal. Select "ON" to reflect image horizontally.
BOTH
VERT
HORIZ
OFF
■
Special Page Menu
Special Page Menu
■
SAVE / RESTORE
Select "OFF" to show the image as normal. Select "ON" to reflect image horizontally.
RESOLUTION
Choose resolution between high and normal with the selector (RIGHT/LEFT)
ㆍ
The high resolution supports
Progressive Rate video up to
540 TV Line and normal resolution
supports 480 TV Line.
CAMERA ID
OFF
MIRROR
OFF
BACKLIGHT
OFF
RESOLUTION
HIGH
NORMAL
SAVE / RESTORE
ADVANCED..
RETURN
SPECIAL
CAMERA ID
OFF
MIRROR
OFF
BACKLIGHT
OFF
RESOLUTION
HIGH
SAVE / RESTORE
ADVANCED..
RETURN
SPECIAL
SAVE / RESTORE
RESTORE USER SETTINGS
SAVE USER SETTINGS
RESTORE FACTORY SETTINGS
PREVIOUS PAGE
VIDEO STANDARD
You can adjust amplitude of video output level.
VIDEO STANDARD NTSC
SYNC
INT
RETURN
ADVANCED SETUP
SHARPNESS
-8 ------------ 8
-8 ------------ 8
VERSION (D25_CLINTON_BELUGA)
NTSC
SETUP
VIDEO LEVEL
COLOR BAR
PREVIOUS PAGE
110
------------
80
150
OFF
OFF
SYNC
LINE LOCK
PREVIOUS PAGE
519
-----------
0
624
V PHASE
- INT : Internal synchronisation
- LL : External line-lock synchronisation
ㆍ
If 'LL' is selected, it can be adjusted
to the desired phase.
Press the SET button.
ㆍ
Adjust to the desired phase from
0 to 624.
Two sychronisation modes are available, INTERNAL and EXTERNAL LINE-
LOCK. In LINE-LOCK mode, it synchronises the video signal between cameras
without a synchronous generator. The line-lock synchronisation is only used in
areas of 60Hz (NTSC) / 50Hz (PAL).
VIDEO STANDARD
NTSC
SYNC
INT
LL
RETURN
ADVANCED SETUP
SHARPNESS
-8 ------------ 8
-8 ------------ 8
VERSION (D25_CLINTON_BELUGA)
APERTURE
APERTURE
■
Special Page Menu
Advanced Page Menu
■
22
High Resolution Color Wide Dynamic Dome Camera
23
High Resolution Color Wide Dynamic Dome Camera
24
High Resolution Color Wide Dynamic Dome Camera
25
High Resolution Color Wide Dynamic Dome Camera
SHARPNESS
The outline of the video image becomes cleaner and more distinctive as the level
of SHARPNESS increases. If the level gose up excessively, however, it may affect
the video image and generate noise.
ㆍ
The available range of level is -8 ~ 8
ㆍ
The available range of level is -8 ~ 8
VIDEO STANDARD
NTSC
SYNC
INT
RETURN
ADVANCED SETUP
SHARPNESS
-8 ------------ 8
-8 ------------ 8
VERSION (D25_CLINTON_BELUGA)
APERTURE
The outline of the video image becomes cleaner and more distinctive as the level
of APERTURE increases. If the level gose up excessively, however, it may affect
the video image and generate noise.
APERTURE
VIDEO STANDARD
NTSC
SYNC
INT
RETURN
ADVANCED SETUP
SHARPNESS
-8 ------------ 8
-8 ------------ 8
VERSION (D25_CLINTON_BELUGA)
APERTURE
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
• Check the power connections.
• Check the VIDEO signal line connection.
• Make sure the lens is clean. Clean the lens with a
soft clean lint free cloth.
• Adjust the monitor contrast & brightness controls.
• Re-position the camera if necessary.
The image on the
screen is dark.
• Adjust the contrast control of the monitor.
• If you have an intermediate device, set the 75
Ω
/ Hi-z
properly.
The camera is not working
properly, and the surface
of the camera is hot.
• Check that an appropriate power source is
connected to the camera.
The DAY/NIGHT menu
does not work.
• Check that AGC in the EXPOSURE menu is set
to 'OFF'.
The SENS-UP function
does not work.
• Check that AGC in the EXPOSURE menu is not
set to 'OFF'.
• Check that SHUTTER in the EXPOSURE menu
is not set to 'FLK' or 'MANUAL'.
Solution
■
Advanced Page Menu
Troubleshooting
■
Problem
The Motion Detection
function does not
work.
Color is not correct.
• Check that MOTION DET in the SPECIAL SETUP
is not set to 'OFF'.
• Check the WHITE BAL settings in the SETUP menu.
The screen flickers
continually.
• Check that the camera is not facing toward the
sun.
Solution
26
High Resolution Color Wide Dynamic Dome Camera
27
High Resolution Color Wide Dynamic Dome Camera
■
Troubleshooting
Specifications
■
ITEM
Specifications
Image Sensor
Effective Pixels
Sync System
Electronic Shutter
Main Video Output
Service Monitor Output
Horizontal Resolution
Min. Illumination
Dynamic Range
AGC Control
DNR
Lens
Camera Control&Setup
Operating Temperature
Operating Humidity
Weight
1/3'' Pixim C-MOS BELUGA Sensor
720(H) x 540(V)
INT / LL Selectable
up to 1/22,000sec.
1.0 Vp-p Composite, 75 ohm
1.0 Vp-p Composite, 75 ohm
540 TV Lines (High Resolution mode)
0.5 Lux
120dB(max), 102dB(typical)
0~46dB
OFF / AUTO
Filter Changeable Lens
OSD Menu
-10
℃
~ +50
℃
Within 90% RH
550g
AC24V / DC12V (Max. 205mA / 250mA)
Power Consumption
■
MEMO
CE-955-CAM-WD