Cli-mate CLI-DH20-E Instruction Book - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

Air Dehumidification System

Instruction Book – CLI-DH20-E

CLI-MATE

RECOMMENDS

SAFETY FIRST

At Cli-Mate we are very

safety conscious. We design

and manufacture consumer

products with the safety of you,

our valued customer, foremost

in mind. In addition we ask

that you exercise a degree of

care when using any electrical

appliance and adhere to the

following precautions.

IMPORTANT

SAFEGUARDS

READ ALL

INSTRUCTIONS BEFORE

USE AND SAVE FOR

FUTURE REFERENCE

• All components need to

be installed in accordance

with the user manual

instructions for correct

performance of unit.

• This appliance should be

used in conjunction with

a safety switch.

• This appliance is not

intended for use by

persons (including

children) with reduced

physical, sensory or

mental capabilities,

or lack of experience

and knowledge, unless

they have been given

supervision or instruction

concerning use of the

appliance by a person

responsible for their safety.

Cli-Mate Recommends
Safety First

Components

Functions

Care & Cleaning

Troubleshooting

Contents

• Do not operate any

appliance with a damaged

cord or plug or after the

appliance malfunctions, or

has been damaged in any

manner.

• If the supply cord

is damaged, it must

be replaced by the

manufacturer, its service

agent or similarly

qualified persons in order

to avoid a hazard.

• Children should be

supervised to ensure that

they do not play with the

appliance.

• Do not use appliance for

other than intended use.

• Do not disassemble, repair

or re-form the unit, it may

cause injury, fire or other

malfunctions. A qualified

service agent must make

all service adjustments.

Unauthorised

disassembling of the

product will void

the warranty.

• Unplug from outlet when

not in use and before

cleaning. Never plug in

or unplug unit with wet

hands.

• Do not use unit outdoors

or expose to greasy

or damp environments.

• Keep the rear air inlet

and outlet free from air

blocking materials such

as clothing, plastic bags

or papers. Air flow

is required for the unit

to operate effectively.

• Place unit on a flat

location at least 30cm

from wall or other

appliances.

• When the unit is in

operation, keep all body

parts, jewellery, hair and

loose clothing away from

the openings

• Unit must be placed

on a stable flat surface to

reduce possible excessive

vibration and noise.

• Keep the unit away

from fire, flammable gas,

combustible products

or vapours, and corrosive

substances.

• Do not operate the unit

without filters.

• When transporting the

air purifier, always hold

the handles on the side

of the unit.

• To protect against

fire, electric shock and

personal injury, do not

immerse cord, plugs,

or appliance in water

or other liquid.

• Do not place on or near

a hot gas, electric burner

or heating appliance.

• Check voltage to be sure

that the voltage indicated

on the nameplate agrees

with your voltage.

SPECIAL

PRODUCT

INSTRUCTIONS

• This appliance is designed

for household use only.

Do not use this unit

outdoors, in wet

environments or on

wet surfaces.

• To achieve best

performance; make sure

all doors and windows are

closed before turning on

the unit.

• The appliance air vents

and air grilles must not

be obstructed at any time.

Air flow is required for the

unit to operate effectively.

Place unit in a flat location

at least 30cm from wall or

other appliances.

• Units must be placed on

a stable flat surface to

reduce possible excessive

vibration and noise.

• Units must never be

placed and operated on

an angle as water spillage

from reservoir can occur.

• Empty the water when

water reservoir is full or

not in use for a prolonged

period.

• Recommended operating

temperature range is

minimum 5°C

(RH 40%) and maximum

35°C (RH 90%).

• Any servicing other

than cleaning and

user maintenance will

violate the terms of

this WARRANTY and

warranty will be null and

void.

Note: RH = Relative Humidity

IMPORTANT

SAFEGUARDS

FOR ALL

ELECTRICAL

APPLIANCES

• Unwind the power cord

fully before use.

• Do not let the power

cord hang over the edge

of a bench or table, touch

hot surfaces, or become

knotted.

• To protect against electric

shock do not immerse

power cord, power plug

or appliance in water

or any other substance.

• This appliance is not

intended for use by

persons (including

children) with reduced

physical, sensory or mental

capabilities, or lack of

experience or knowledge,

unless they have been

given supervision or

instruction concerning

use of the appliance

by a person responsible

for their safety.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

• Children should be

supervised to ensure

they do not play with

the appliance.

• It is recommended

to regularly inspect the

appliance. Do not use the

appliance if power cord,

power plug or appliance

becomes damaged in

anyway. Return the

entire appliance to

the nearest authorised

Cli-Mate Service Centre

for examination and/

or repair.

• Any maintenance other

than cleaning should

be performed at an

authorised Cli-Mate

Service Centre.

• This appliance is

recommended for

household use only.

Do not use this appliance

for anything other than

its intended use. Do not

use in moving vehicles or

boats. Do not use outdoors.

Misuse may cause injury.

• The installation of

a residual current

device (safety switch)

is recommended to

provide additional safety

protection when using

electrical appliances.

It is advisable that

a safety switch with

a rated residual operating

current not exceeding

30mA be installed in the

electrical circuit supplying

the appliance. See your

electrician for professional

advice.

WARNING

Fully unwind the cord

before use.

Components

Dry Air Outlet

Control Panel

LCD Display

Handle

Humid Air inlet

Air Filter

Continuous Drainage Outlet

(For hose connection)

Water Reservoir

Continuous Drainage Hose*

* Continuous drainage hose is an extra drainage

option; hose does not need to be connected if using
the water reservoir to catch condensed water.

Components

Power

Turns unit ON/OFF.

Mode

Allows selection of desired working mode, the

corresponding indicator light will illuminate.

Setting

Allows selection of the desired running mode

(High (H), Low (L)) and ambient relative

humidity ratios.

LCD DISPLAY ICONS

Automatic Dehumidifying

RH Settings

Wind Speed

Water Full

Ambient Humidity

Swing

Dehumidifying

Timer

Defrost

Ambient Temperature

Continuous Dehumidifying

Timer

To set automatic ON/OFF timer at 1 to 24 hour

settings.

Swing

Turns air deflector ON/OFF to allow better

distribution of air output.

CONTROL PANEL

OPERATION INSTRUCTIONS

1. Plug unit into power socket, unit will beep

twice.

2. Press POWER button to turn unit on.

The dry air outlet air deflector will open

and the blue backlight will illuminate and

turn off after 15 seconds. The LCD display

will show the working mode, status of unit,

ambient humidity and temperature.

NOTE

The dehumidification setting is automatically

set on continuous and default fan speed is

set at High (H).

NOTE

The dry air outlet air deflector will close when
unit is turned off. Press power button to turn

unit off.
3. MODE button sets up Continuous/

Automatic dehumidifying modes and Fan

speed.

4. SETTING button confirms the running

fan speed or Continuous/Automatic

dehumidifying ratio.

5. To set automatic dehumidifying relative

humidity (RH) ratio, press MODE button

until LCD display lights up on the icon

. Press SETTING button to select relative

humidity (RH) ratio in 5% increments

between 40% - 80%, and then press MODE

to set selection, or three seconds after

pressing SETTING the desired humidity

ratio is set and the indicator light will stop

illuminating

NOTE

When setting unit on automatic

dehumidification, the continuous
dehumidifying mode will be cancelled.

PRODUCT SPECIFICATIONS

CLI-DH20-E AIR DEHUMIDIFICATION SYSTEM

DEHUMIDIFICATION

20 LITRES/DAY

DEHUMIDIFYING CAPACITY

0.83 kg/hour

AIR CIRCULATION

140 cbm/hour

POWER CONSUMPTION

340 watts

CAPACITY OF WATER TANK

3.8 L

REFRIGERANT

R134a (150 g)

NOISE LEVEL

≤46dB

N.W

12.8 kgs

G.W

14.0 kgs

PRODUCT DIMENSIONS

350 x 242 x 586 mm

Functions

NOTE

When the ambient relative humidity is 5%
higher than the selected relative humidity ratio

percentage (RH%), the unit will switch on and
unit will operate at the selected setting.

NOTE

The unit will continuously run, regardless of

the ambient relative humidity, when
continuous dehumidification mode is set.
6. To set fan speed, press MODE button until

LCD display lights

up on the fan icon . Press SETTING

button to select between high (H) and low

(L) fan speed, and then press MODE to set

selection, or three seconds after pressing

SETTING the fan speed is set. When fan

speed is set the fan icon will rotate.

NOTE

When the temperature sensor detects the

ambient humidity is lower than selected
setting, fan will work at a low (L) speed.

NOTE

When the temperature sensor detects the
ambient room temperature to be higher or
equal to 32°C, the unit fan speed will
automatically switch to operate at high (H).
7. To set continuous dehumidification, press

MODE button until LCD displays the
continuous dehumidification icon and

then press SETTING to set continuous

dehumidification mode.

8. To select ON/OFF timer.

To set automatic OFF timer, press TIMER

button when unit is powered ON; select the

desired running time, 1 to 24 hours.

Unit will automatically switch OFF once

selected OFF time duration has lapsed.

The screen will display time elapsed and

remaining running time.

To set automatic ON timer, press TIMER

button when unit is powered OFF or on

standby mode, select the desired time for

unit to start operating in 1 to 24 hours.

Timer symbol will be displayed on screen,

and unit will automatically switch on when

time is reached.

NOTE

Memory function will not work on Timing

shutdown.
9. When unit is powered ON, press SWING to

oscillate dry air outlet deflector panel from

50 to 95 degree angle automatically, LCD

will display swing icon

. Press SWING

again to fix stationary angle, swing icon will

disappear.

10. As unit operates, condensed water will drain

into water reservoir. When water reservoir

is full unit will beep 10 times and WATER

FULL indicator light will illuminate and

all other indicator lights will turn orange.

Unit will automatically stop operating.

The water reservoir must be removed and

emptied before unit will operate again.

Remove water
reservoir in
accordance with
arrow direction

SAFETY FEATURES

Automatic Defrosting

To ensure the unit operates and performs as

stated, the unit has been designed with an

Automatic defrost function as frost can be

produced on the surface of the evaporator in

low temperatures.
When the temperature sensor detects the room

temperature has dropped to 16°C or lower,

the Auto Defrost function will start and the

DEFROST symbol will be displayed on the

LCD screen. The unit compressor will run for

25 minutes on dehumidification mode and

then the fan will run at high speed in 7 minute

cycles to defrost the unit.

NOTE

The dehumidification symbol will disappear.

Protection Of Extremely Low
& High Temperature

Unit is built with a room temperature sensor

that will automatically shut off the unit when

the ambient temperature is either less than

or equal to 0°C or greater than or equal to

40°C. When sensor is activated there will be a

continuous warning beeper which will beep 3

long and 2 short beeps and the corresponding

temperature (either 0°C or 40°C) will be

displayed on LCD screen.

NOTE

Unit will not be operable when sensor is

activated, to restart unit, unplug unit and

restart again.

NOTE

If unit is shut off due to protection of extremely

low & high temperatures, the unit memory

function will not operate, unit will reset at

default setting.

Failure of Humidity & Temperature Sensor

When the connection wire between the

humidity and temperature sensor is

disconnected, the humidity icon will blink

and 0°C and 0% RH will display on LCD

screen. Unit will switch into continuous

dehumidifying mode.
If the temperature evaporator sensor becomes

open circuit or short circuit the DEFROST light

will start blinking.

Unit will operate in a humidifying and

defrosting mode, dehumidifying for 20

minutes and then defrosting for 5 minutes.

NOTE

If the temperature sensor malfunctions, the

unit will continue to work but at a lower

efficiency.

Compressor Protection

If the unit malfunctions during the operation

of the unit and the compressor fails, the

compressor will switch off. Wait a minimum of

three minutes to reoperate unit.

Memory Function

If the power is cut off during the operation

of the appliance, the unit will memorise the

working mode automatically.
Once power is restored to the unit, the

appliance will restart and continue working at

the last set working mode.

NOTE

If the ON/OFF timer has been set and

activated, the unit will restart at default

operating mode, not at previous set mode.

NOTE

If power supply is cut off due to one of the

safety features being activated, the unit will not

restart at previous set mode but at the default

mode.

Optional Continuous Drainage Installation

1. Ensure that unit is OFF and unplugged

from wall socket.

2. Remove water reservoir out and connect

water drain hose to spigot (continuous

drainage outlet) as shown

Water

spigot

3. The other end of this hose must be placed

over a water drain.

NOTE

For the unit to drain correctly, no part of the

hose should be above the level of the water

spigot (continuous drainage outlet).

Care & Cleaning

CAUTION:

Before carrying out any

maintenance or cleaning of the unit, make

sure that the power to the unit is turned off and

power cord is removed from the power socket.
• Do not clean unit with any abrasive cleaning

agents or solvents.

• Do not apply any water directly to the unit of

cleaning.

• Only use a soft clean cloth for all cleaning

purpose

CLEANING THE AIR FILTER:

Remove Air Intake Frame as shown below

to access air filter. Use a vacuum cleaner or

wash in cool water to clean filter. Allow to dry

thoroughly before replacing filter and Air Intake

Frame.

Air Intake Frame

Air Filter

STORAGE

If not using the unit for a prolonged period,

switch off and unplug the unit, empty the water

reservoir, and allow minimum of two days for

unit to dry before packing away. Keep unit in a

dry and ventilated place.

REPAIR

If the unit or power cord is damaged, stop

using immediately and bring the unit to

authorised service centre for repair, never
attempt to dismantle, repair or modify the unit

by yourself. Warranty will be null and void.

PROBLEM

POSSIBLE CAUSES

EASY SOLUTION

No Power.

•

Unit is not plugged into

wall socket.

•

One of the units product safety
features has been activated.

•

Check connection to wall socket.

•

Check indicator lights to determine
which safety feature has been
activated. If no lights, unplug

unit and wait five minutes before
restarting and operating appliance.

If problem persists call customer
care.

No Air.

•

Unit is not plugged into wall socket

•

Humidity ratio (if set) has been
reached.

•

Air outlet blocked.

•

Water Reservoir is full.

•

1. Check connection to wall socket

•

Wait 30 minutes, turn unit back on.

•

Ensure there are no objects
obstructing air outlet.

•

Empty water reservoir.

Unit Overheating.

•

Air ventilation around unit

not sufficient.

•

Humid Air Inlet or air outlet is being
obstructed or blocked by foreign

objects.

•

Internal malfunction.

•

There must be at least 30cm between

unit and wall or other appliances.

•

Ensure there are no object
obstructing the air intake grille or

air outlet

•

Return unit to service agent. Call

customer care.

Loud Noise.

•

Unit not on a level flat surface.

•

Faulty internals.

•

Reposition or relocate unit onto a flat
surface.

•

Call customer care.

Water at Base of Unit.

•

Water reservoir not installed
correctly.

•

Continuous drainage hose not
connected to spigot properly.

•

Continuous drainage hose outlet

not over water drain.

•

Reinstall water reservoir.

•

Check hose connection.

•

Check hose outlet is flowing into

water drain.

Beeping Alarm Noise.

•

Water Reservoir is Full.

•

Ambient temperature is either less
than or equal to 0°C or greater than

or equal to 40°C.

•

Remove and empty water reservoir

•

Turn off unit and restart, or if unit
is in defrost mode

, allow unit to

complete function and cycle.

Troubleshooting

Notes

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.

Due to continued product improvement, the products illustrated/photographed

in this brochure may vary slightly from the actual product.

CLI-DH20-E ANZ – A18

Web: www.breville.co.nz

Web: www.breville.com.au

Australian Customers
Phone:

1300 139 798

New Zealand Customers
Phone:

0800 273 845

Breville Customer Service Centre

Ask a Question ?