PDF User Manual

CLI-AP-BF | Installation & Operating Instructions

Bladeless Fan

with Air Filtration 

Congratulations on your purchase of a Cli~Mate 
Bladeless Fan with Air Filtration

Delivers a refreshing stream of cool air whilst the built-in Air Filtration helps to improve the quality of the air in your home.

Note: Please read through the instructions carefully before using or installing the product and ensure that the 
manual is kept in a safe place for future reference.

The system must be properly installed and located in accordance with the installation instructions before it is used.

During the set up of this product if you have any questions / comments / issues DO NOT RETURN TO STORE.
For service and technical advice on this product, free call 1300 764 325.

Electrical Requirements:
Australia / New Zealand 100-240V 50/60Hz 
Due to manufacturing alterations product may 
vary slightly from that pictured. 

CUSTOMER HOTLINE: 1300 764 325

Register your warranty online at 

www.cli-mate.com.au/warranty-and-registration
Aquaport Corporation Pty Ltd 
70 Hardys Road, Torrensville SA 5031
Telephone: 08 8354 0711
Facsimile: 08 8354 0722
Email: aquaport@aquaport.com.au 
Web: www.cli-mate.com.au
Social:    /climatebrand     @climatebrand

New Zealand Customers 
Telephone: 0800 210 190 
Email: info@aquaport.co.nz

INSTALLATION AND OPERATING INSTRUCTIONS  

1

SAFETY PRECAUTIONS

Read all instructions carefully.

• All components need to be installed in accordance with the user 

manual instructions for correct performance of unit 

• This appliance should be used in conjunction with a safety switch

• This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they have been given 
supervision or instruction concerning use of the appliance by a 
person responsible for their safety 

• Do not operate any appliance with a damaged cord or plug or after 

the appliance malfunctions, or has been damaged in any manner 

• If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualifi ed persons in 
order to avoid a hazard

• Children should be supervised to ensure that they do not play 

with the appliance. 

• Do not use appliance for other than intended use.

• Do not disassemble, repair or re-form the unit, it may cause 

injury, fi re or other malfunctions. A qualifi ed service agent must 
make all service adjustments. Removing any part or attempting to 
service the unit will void the warranty 

• Unplug from outlet when not in use and before cleaning. Never 

plug in or unplug unit with wet hands 

• Do not use unit outdoors or expose to greasy or damp 

environments 

• The unit’s air vents must not be obstructed at any time. Air fl ow is 

required for the unit to operate effectively. Place unit in a fl at well-
ventilated location at least 30cm from wall or other appliances 

• Unit must be placed on a stable fl at surface to reduce possible 

excessive vibration and noise. 

• To protect against fi re, electric shock and personal injury, do not 

immerse cord, plugs or appliance in water or other liquid 

• Do not place on or near a hot gas, electric burner , heating 

appliance or other high temperature heat sources  

• Keep the unit away from fi re, fl ammable gas, combustible 

products or vapors and corrosive substances 

• Check voltage to be sure that the voltage indicated on the name 

plate agrees with your voltage 

• When transporting the unit, always carry by the base.  

• Unplug from outlet when not in use for extended period

• Do not use outdoors or in damp or wet environments  

FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT FREE 
CALL 1300 764 325

2

 INSTALLATION AND OPERATING INSTRUCTIONS

PRODUCT SPECIFICATIONS

System Specifi cations

CLI-AP-BF

Bladeless Fan with Air Filtration

Model Code

CLI-AP-BF

Power Output

DC 24V 1.5A 36W

Power Input

Australia / New Zealand 100-240V 50/60Hz

Air Flow

516m

3

/h

Replacement Filter Code

CLI-APBF-RF

N.W

2 kgs

G.W

3 kgs

Product Dimensions

W315 x L264 x H490  mm                 

INSTALLATION AND OPERATING INSTRUCTIONS  

3

1. Power button ON/OFF 
2. Fan speed knob 

(7 Speeds - Turn knob clockwise to increase speed. 
Turn anti-clockwise to decrease speed. ) 

3. Power indicator light
4. Oscillation button    
5. Air inlet and fi lters (left side not shown)
6. Air outlets 
7. LED illumination ring

UNIT COMPONENT IDENTIFICATION

1

4

5

5

6

7

2

3

4

 INSTALLATION AND OPERATING INSTRUCTIONS

1.

Oscillation 

110° oscillation range. Press 
button again to lock current 
position.         

2.

Power On/Off

Switch unit On or Off. 

3.

LED Brightness (12 levels)

 a. Increases brightness 
 b. Decreases brightness   

4.

LED Colour Selection

Select the colour of the LED 
light illumination. 

5.

Fan Speed (7 speeds)

 a. Increase fan speed 
 b. Decrease fan speed    

6.

Timer settings

Fan mode will automatically 
switch off once selected time 
duration has lapsed (if LED 
light selected it will remain on 
after the fan turns off). 

7. LED On/Off

 a. Turn Off LED  
 b. Turn On 

(LED will start at the last set program)

8.  LED light mode settings

Mode 1

a. Fast colour change.  
Automatic colour cycle. 

Mode 2

b. Slow colour change.  
Automatic colour cycle

Mode 3

c. Fast fade transition into next 
colour. Automatic colour cycle.

  Mode 4

d. Slow fade transition into next 
colour. Automatic colour cycle.

9. Default Light

Press to turn on default light.     

REMOTE CONTROL COMPONENT IDENTIFICATION

2

1

5

6

3

7

4

8

9

Note: 

• Avoid storing the remote control in direct sunlight 
• The battery for this remote control is for initial use only and will need to be changed   
• Battery Type CR2025       

• Carefully follow all instructions and warnings provided with the new battery      

INSTALLATION AND OPERATING INSTRUCTIONS  

5

TILT FUNCTION  

To adjust the air fl ow angle, hold the base and tilt the fan 
backwards or forwards (up to 15°)   

CLEANING AND MAINTENANCE     

WARNING:

 Before carrying out any maintenance or cleaning of the 

unit, make sure that the power to the unit is turned off and power 
cord is unplugged from the power socket.  

External cleaning of unit:

• Wipe the body of the unit with a dry or damp cloth only    

• Do not clean with any abrasive cleaning agents or solvents  

• Do not apply any water directly onto the unit      

6

 INSTALLATION AND OPERATING INSTRUCTIONS

CLEANING AND REPLACEMENT OF FILTERS                     

Cleaning Filters 

It is recommended that the fi lters are cleaned monthly.      

1.  Remove the fi lters. See ‘Removing Filters’ section. 

2.  Run a vacuum cleaner with a nozzle or brush attachment on 

low power setting along the blue side and white side of the 
fi lters to pick up any accumulated dust and particles.              

Replacing Filters

Replacement Filters Model Code: CLI-APBF-RF 

It is recommended that the fi lters are replaced every 12 months. 

1.  Remove the fi lters. See ‘Removing Filters’ section. 

2.  Remove and discard the old fi lters. 

3.  Replace with new fi lters.

Note:

 Please unwrap fi lters from any plastic

packaging before operation.

Removing Filters

Note:

 Unit contains 2 fi lters. (1 located on the left side of the unit 

and 1 located on the right side of the unit). 

Figure 1:

 Press and hold down button and pull outwards

Figure 2:

 Remove fi lter

from plastic fi lter screen 

Fig 1

Fig 2

INSTALLATION AND OPERATING INSTRUCTIONS  

7

TROUBLE SHOOTING

BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.

Problem

Possible Causes

What To Do

No power 

1. Unit is not plugged into wall socket.

1. Check connection to wall socket.

Reduced air fl ow 

1. Air inlet or air outlet is being 

obstructed or blocked by debris. 

1. Check for blockages in the air inlet and outlet. 

Clear any debris. 

The remote control does 
not work

1. Battery could be dead, depleted

or not correctly installed. 

2. Remote control distance is out of range.

1. Replace battery. Ensure the  battery is correctly installed.  

2. Remote effective distance approx. 3 metres.

Customer Care 1300 764 325

8

 INSTALLATION AND OPERATING INSTRUCTIONS

Your Aquaport Australian 12 Month Repair or Replacement Warranty

 Aquaport warrants this appliance to the fi rst purchaser and subject to 
the stated conditions:
Warranty covers any defects in material or workmanship in the 
manufactured product within the fi rst twelve months from the date of 
purchase.
To make a warranty claim you must call Aquaport on toll free number 
1300 764 325 for instructions. If a product is found to be faulty there 
is a 90 day return policy from the date of purchase. 
For warranty claims outside of 90 days from date of purchase, product 
will be repaired or replaced at our discretion. Repair or replacement 
costs of the product will be covered under warranty by Aquaport.
Goods presented for repair may be replaced by refurbished goods of 
the same type rather than being repaired. Refurbished parts may be 
used to repair the goods.
Warranty does not cover fi lters which are consumable unless proven to 
have defects in material or workmanship in the manufactured product.
Our goods come with guarantees that cannot be excluded under 
the Australian Consumer Law. You are entitled to a replacement or 
refund for a major failure and compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if goods fail to be of acceptable quality and the 
failure does not amount to a major failure. 

Conditions Of This Warranty:

1.  This product has been fully installed in accordance with the  

user manual installation instructions.

2.  The warranty extends only to repairing or replacing    
 

any component that proves to be defective in material

or workmanship.

3.  The warranty does not cover defects occasioned by misuse, 
 

alterations, accidents, or used for other than the intended 

 purpose.
4.  The warranty does not cover damage to the product caused by 
 

accident, fi re, fl oods, power surges or black outs. 

5.  Proof of purchase is required for warranty claims.

Please keep purchase receipt in a safe place.

To enable us to register your warranty and provide service should a 
problem occur, we recommend you register your warranty online at:

www.cli-mate.com.au/warranty-and-registration

Aquaport Corporation Pty Ltd

70 Hardys Road, Torrensville
South Australia 5031    

Customer Care 1300 764 325

New Zealand Customers

Telephone: 0800 210 190
Email: info@aquaport.co.nz

CUSTOMER HOTLINE: 1300 764 325

Aquaport Corporation Pty Ltd 

70 Hardys Road, Torrensville SA 5031

 Telephone: 08 8354 0711

Facsimile: 08 8354 0722

 Email:  aquaport@aquaport.com.au  

New Zealand Customers 

Telephone: 0800 210 190 

Email: info@aquaport.co.nz

Web: www.cli-mate.com.au

Social:    /climatebrand     @climatebrand