PDF User Manual

  1. Home
  2. Manuals
  3. Cli-mate CLI-AP35 Installation & Operating Instructions Manual

Cli-mate CLI-AP35 Installation & Operating Instructions Manual

Made by: Cli-mate
Type: Installation & Operating Instructions
Category: Air Cleaner
Pages: 12
Size: 0.36 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

CLI-AP35 | Installation & Operating Instructions

Air

Purification

System

 


background image

Congratulations on your purchase of a 
Cli~Mate Air Purifi cation System  

This Air Purifi er improves the quality of the air in your home by helping to eliminate 
airborne matter such as allergens and unpleasant odours. 

Note: Please read through the instructions carefully before using or installing the product and ensure that the 
manual is kept in a safe place for future reference.

The system must be properly installed and located in accordance with the installation instructions before it is used.

During the set up of this product if you have any questions / comments / issues DO NOT RETURN TO STORE.
FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT, FREE CALL 1300 764 325.

Electrical Requirements:
Australia / New Zealand 220-240V 50/60Hz
Due to manufacturing alterations product may 
vary slightly from the pictured. 

CUSTOMER HOTLINE: 1300 764 325

Register your warranty online at 

www.cli-mate.com.au/warranty-and-registration
Aquaport Corporation Pty Ltd 
70 Hardys Road, Torrensville SA 5031
Telephone: 08 8354 0711
Facsimile: 08 8354 0722
Email: aquaport@aquaport.com.au 
Web: www.cli-mate.com.au
Social:    /climatebrand     @climatebrand

New Zealand Customers 
Telephone: 0800 210 190 
Email: info@aquaport.co.nz

 


background image

INSTALLATION AND OPERATING INSTRUCTIONS  

1

 

 

SAFETY PRECAUTIONS

Read all instructions carefully.
• All components need to be installed in accordance with the user 

manual instructions for correct performance of unit.

• This appliance should be used in conjunction with a safety 

switch. 

• This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance 
by a person responsible for their safety.

• Do not operate any appliance with a damaged cord or plug or 

after the appliance malfunctions, or has been damaged in any 
manner.

• If the supply cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualifi ed persons in 
order to avoid a hazard.

• Children should be supervised to ensure that they do not play 

with the appliance. 

• Do not use appliance for other than intended use. 
• Do not disassemble, repair or re-form the unit, it may cause 

injury, fi re or other malfunctions. A qualifi ed service agent must 
make all service adjustments. Removing any part or attempting 
to service the unit will void the warranty. 

• Unplug from outlet when not in use and before cleaning. 

Never plug in or unplug unit with wet hands. 

• Do not use unit outdoors or expose to greasy or 

damp environments. 

• Keep the air inlet and outlet free from air blocking materials 

such as clothing, plastic bags or papers. Air fl ow is required for 
the unit to operate effectively. 

• Place unit on a fl at location at least 30cm from wall 

or other appliances. 

• When the unit is in operation, keep all body parts, jewellery, hair 

and loose clothing away from the openings. 

• Unit must be placed on a stable fl at surface to reduce possible 

excessive vibration and noise. 

• Keep the unit away from fi re, fl ammable gas, combustible 

products or vapours, and corrosive substances. 

• Do not operate the unit without fi lters.
• When transporting the air purifi er, always hold the handle at the 

back of the unit. 

• Do not remove the front cover of the unit when it is in operation.
• To protect against fi re, electric shock and personal injury, do not 

immerse cord, plugs, or appliance in water or other liquid. 

• Do not place on or near a hot gas, electric burner 

or heating appliance. 

• Check voltage to be sure that the voltage indicated on the 

nameplate agrees with your voltage. 

 


background image

2

 

 INSTALLATION AND OPERATING INSTRUCTIONS

PRODUCT FEATURES 

Filter

 

The 3 layer fi lter contains a Pre-fi lter, a HEPA fi lter and an activated 
carbon fi lter. 

• The Pre-fi lter traps larger particles such as dust, pet hair and 

large-sized allergens. 

• The HEPA fi lter (Grade H12) removes 99.5% of particles as 

small as 0.3 microns and greater from the air. It is capable of 
removing smoke, dust, pollen, pet dander, mold spores, bacteria 
and allergens in the air. 

• The Activated carbon fi lter absorbs common household odours, 

VOCs, cigarette odours, chemical fumes and smoke. 

   

 


background image

INSTALLATION AND OPERATING INSTRUCTIONS  

3

 

 

COMPONENT IDENTIFICATION

1.  Front Cover

2.  Control buttons

3.  Air Outlet

4.  Pre-fi lter, HEPA and active carbon fi lter

5.  Dust and odour sensor

3

5

2

5

4

1

 


background image

4

 

 INSTALLATION AND OPERATING INSTRUCTIONS

CONTROL PANEL/BUTTONS

  1. “POWER” BUTTON:

  

Turns unit on or off.

  2. “AUTO” Mode: 

In this mode, the speed of the air fl ow/fan speed will change 
automatically depending on the air quality as detected by the dust 
and odour sensor.

NOTE: 

The AUTO button is also used to reset the fi lter timer. Press 

and hold button for 5 seconds to reset fi lter timer.

  3. “SPEED” Options:

 

Allows selection for desired speed setting – low (I), medium (II), 
high (III).

  4. “SLEEP” Mode:

In this mode, the unit will continue to operate, but with the display 
lights dimmed. 

  5. “TIMER”: 

To set automatic OFF timer at 2, 4, 8 hour settings.

DISPLAY PANEL 

A. Power

 Icon light illuminates when unit is on.

B. Auto

 Icon light illuminates when in AUTO mode.

NOTE: 

When the Auto icon light fl ashes, it indicates that the Filter 

will need to be replaced.

C.  Fan Speed Indicator

 Icon light illuminates on selected setting.

 

I - Low speed

 

II - Medium speed

 

III- High speed

D. Sleep

 Icon light illuminates when in sleep mode.

E.  Timer Indicator

 Icon light illuminates on selected setting.

    2H – 2 hours

    4H – 4 hours

    8H – 8 hours

1

A

B

D

C

E

2

3

4

5

 


background image

INSTALLATION AND OPERATING INSTRUCTIONS  

5

 

 

OPERATION INSTRUCTIONS

Important:

 Before fi rst use, open the front cover and unwrap

the fi lter before operation. See page 6 for fi lter details.

1.  Plug the unit into a power socket. Ensure unit is located on a 

fl at, stable and level surface.

2.  Press the POWER button 

 to turn the unit on. The unit will 

start running and the display panel icon lights will illuminate 
indicating the current settings. 

3.  To select AUTO mode, press the 

 

button. The AUTO icon 

light will illuminate and the fan speed of the unit will change 
automatically depending on the air quality as detected by the 
dust and odour sensor. 

4.  To select the fan SPEED, press the 

 button until the light 

icon illuminates on the desired speed - low (I), medium (II), 
high (III). 

5.  To select SLEEP mode, press the 

 

button. The SLEEP icon 

light will illuminate and all illuminated icon lights will dim. Unit 
will remain in operation at the current selected settings. 

6.  To set automatic off TIMER press the 

 

button until the light 

icon illuminates on the desired time 2/4/8 hours. The unit will 
automatically switch off when the duration has lapsed.

During the setup of this product, if you have any questions/
comments / issues, DO NOT RETURN TO STORE. 

FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT FREE 
CALL 1300 764 325.

CLEANING AND MAINTENANCE 

Before carrying out any maintenance or cleaning of the unit, make 
sure that the power to the unit is turned off and power cord is 
unplugged from the power socket.

External cleaning of the unit:

• Do not clean the unit with any abrasives cleaning

agents or solvents.

• Do not apply any water directly onto the unit of cleaning.

• Only use a soft clean cloth for all cleaning purposes.

• Clean the air outlet with a dry cloth, soft brush or vacuum cleaner.

PRODUCT SPECIFICATIONS

Air Purifi er

Model Code

CLI-AP35

Dimensions (mm) 

390 (L) x 145(W) x 428(H) mm 

Coverage area 

up to 30m

2

Power consumption 

50 watts 

Net weight

4.5 kgs

Clean air delivery rate 

145 cfm 

Noise level at High speed

<50dB

Noise level at Low speed

<30dB 

Replacement fi lter

CLI-AP35-RF

 


background image

6

 

 INSTALLATION AND OPERATING INSTRUCTIONS

CLEANING THE PRE-FILTER, HEPA AND ACTIVATED CARBON FILTER

It is recommended that the Pre-fi lter (the removable black layer) is 
cleaned every 1-2 weeks of operation, depending on the air quality 
of the room.

To clean fi lters:

1.  Turn the unit off and disconnect the power.

2.  OPEN THE FRONT COVER: Place both hands at the bottom 

corners of the front cover and pull out.

3.  REMOVE THE FILTER: Pull out the fi lter by the belt attachment.

4.  Gently peel away the Pre-fi lter (black layer), which is attached 

by Velcro.

5.  Run a vacuum cleaner with a nozzle or brush attachment 

on low power setting along the HEPA (white side), Activated 
Carbon (black side), and both sides of the Pre-fi lter to pick up 
the dust and various particles.

6.  Re-attach the Pre-fi lter layer and place the fi lter back into the 

air purifi er.

Note:

 When placing the fi lter back into the air purifi er, ensure that 

the fi lter belts and Pre-fi lter is facing outwards.

7.  Reattach the front cover.

REPLACING THE FILTER

When the lifespan of the 3-layer fi lter reaches its end, the icon 
light located under the “REPLACE FILTER” will fl ash, indicating that 
it needs to be changed. Discard the old fi lter and replace with a 
new one. It is not reusable.

The lifespan and duration of the fi lter depends on the air quality 
and surrounding environment. The higher the level of pollutants, 
the shorter the fi lter lifespan. It is advisable to change the fi lter at 
least every 6 months of unit operation.

Cli~Mate Replacement Filter Product Code: CLI-AP35-RF

HOW TO REPLACE THE FILTER

1.  Turn the unit off and disconnect the power.

2.  OPEN THE FRONT COVER: Place both hands at the bottom 

corners of the front cover and pull out.

3.  REMOVE THE FILTER: Pull out the fi lter by the belt attachment 

and discard.

4.  INSTALL NEW FILTER: Replace with the new fi lter. 

Ensure that the fi lter belts and Pre-fi lter is facing outwards.

5.  Reattach the front cover.

6.  Hold down the AUTO 

 button for 5 seconds to

reset the fi lter timer.

 


background image

INSTALLATION AND OPERATING INSTRUCTIONS  

7

 

 

TROUBLE SHOOTING

BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.

Problem

Possible Causes

What To Do

No Power

1. Unit is not plugged into a wall socket.

2. Front cover is not latched fi rmly in place.

3. The fi lter has not been installed fi rmly in place.

1. Check the connection to wall socket.

2. Remove and reinstall front cover.

3. Remove and reinstall the fi lter.

Unit overheating

1. Air ventilation around unit 

not suffi cient. 

2. Air inlet or air outlet is being obstructed or 

blocked by foreign objects. 

3. Internal malfunction.

1. There must be at least 30cm between unit and 

wall or other appliances. 

2. Ensure there are no object obstructing the air 

inlet or air outlet. 

3. Return unit to service agent. Call customer care.

The unit is not effective

1. Filters may be heavily soiled and due for 

replacement.

1. Replace fi lter.

 


background image

8

 

 INSTALLATION AND OPERATING INSTRUCTIONS

Problem

Possible Causes

What To Do

Odour coming from 
the air outlet 

1. Filter may be heavily soiled and due for 

replacement.

1. Replace fi lter. 

Excessive/loud noise

 

1. Unit is on an uneven surface. 

2. Foreign objects have fallen into the unit. 

3. Faulty internals.

1. Ensure the unit is placed on a level surface. 

2. Ensure that no foreign objects have fallen into the unit 

via the air outlet.  

3. Call customer care.

Customer Care: 1300 764 325

 


background image

INSTALLATION AND OPERATING INSTRUCTIONS  

9

 

 

Your Aquaport Australian 1 Year Repair or Replacement Warranty

Aquaport warrants this appliance to the fi rst purchaser and subject 
to the stated conditions:

Warranty covers any defects in material or workmanship in the 
manufactured product within the fi rst twelve months from the
date of purchase.

To make a warranty claim you must call Aquaport on toll free number 
1300 764 325 for instructions. If a product is found to be faulty there 
is a 90 day return policy from the date of purchase. 

For warranty claims outside of 90 days from date of purchase, product 
will be repaired or replaced at our discretion. Repair or replacement 
costs of the product will be covered under warranty by Aquaport.

Goods presented for repair may be replaced by refurbished goods of 
the same type rather than being repaired. Refurbished parts may be 
used to repair the goods.

Warranty does not cover fi lters which are consumable unless proven to 
have defects in material or workmanship in the manufactured product.

The benefi ts given to you by this warranty are in addition to other rights 
and remedies of the consumer law in relation to the goods or services 
to which this warranty relates.

Our goods come with guarantees that cannot be excluded under 
the Australian Consumer Law. You are entitled to a replacement or 
refund for a major failure and compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if goods fail to be of acceptable quality and the 
failure does not amount to a major failure.

Conditions of this Warranty:

1.  This product has been fully installed in accordance 
 

with the user manual installation instructions.

2.  The warranty extends only to repairing or replacing  

 

 

 

any component that proves to be defective in material 

 

or workmanship.

3.  The warranty does not cover defects occasioned by    

 

 

misuse, alterations, accidents, or used for other than the  

 

 

intended purpose.

4.  The warranty does not cover damage to the product    

 

 

caused by accident, fi re, or fl oods, power surges or black outs

5.  Proof of purchase is required for warranty claims.

Please keep purchase receipt in a safe place.

To enable us to register your warranty and provide service should a 
problem occur, we recommend you register your warranty online at: 

www.cli-mate.com.au/warranty-and-registration 

Aquaport Corporation Pty Ltd

70 Hardys Road, Torrensville 
South Australia 5031 

 

       

Customer Care 1300 764 325

New Zealand Customers 
Telephone: 0800 210 190 
Email: info@aquaport.co.nz

 


background image

CUSTOMER HOTLINE: 1300 764 325

Aquaport Corporation Pty Ltd 

70 Hardys Road, Torrensville SA 5031

 Telephone: 08 8354 0711

Facsimile: 08 8354 0722

 Email:  aquaport@aquaport.com.au  

New Zealand Customers 

Telephone: 0800 210 190 

Email: info@aquaport.co.nz

Web: www.cli-mate.com.au

Social:    /climatebrand     @climatebrand