Cli-mate CLI-AH201 Instruction Book - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

Ultrasonic Humidification System

Instruction Book – CLI-AH201

CLI-MATE

RECOMMENDS

SAFETY FIRST

At Cli-Mate we are very

safety conscious. We design

and manufacture consumer

products with the safety of you,

our valued customer, foremost

in mind. In addition we ask

that you exercise a degree of

care when using any electrical

appliance and adhere to the

following precautions.

IMPORTANT

SAFEGUARDS

READ ALL

INSTRUCTIONS BEFORE

USE AND SAVE FOR

FUTURE REFERENCE

• All components need to

be installed in accordance

with the user manual

instructions for correct

performance of unit.

• This appliance should be

used in conjunction with

a safety switch.

• This appliance is not

intended for use by

persons (including

children) with reduced

physical, sensory or

mental capabilities,

or lack of experience

and knowledge, unless

they have been given

supervision or instruction

concerning use of the

appliance by a person

responsible for their safety.

Cli-Mate Recommends
Safety First

Components

Functions

Care & Cleaning

Troubleshooting

Contents

• Do not operate any

appliance with a damaged

cord or plug or after the

appliance malfunctions, or

has been damaged in any

manner.

• If the supply cord

is damaged, it must

be replaced by the

manufacturer, its service

agent or similarly

qualified persons in order

to avoid a hazard.

• Children should be

supervised to ensure that

they do not play with the

appliance.

• Do not use appliance for

other than intended use.

• Do not disassemble, repair

or re-form the unit, it may

cause injury, fire or other

malfunctions. A qualified

service agent must make

all service adjustments.

Unauthorised

disassembling of the

product will void

the warranty.

• Unplug from outlet when

not in use and before

cleaning. Never plug in

or unplug unit with wet

hands.

• Do not use unit outdoors

or expose to greasy

or damp environments.

• Keep the rear air inlet

and outlet free from air

blocking materials such

as clothing, plastic bags

or papers. Air flow

is required for the unit

to operate effectively.

• Place unit on a flat

location at least 30cm

from wall or other

appliances.

• When the unit is in

operation, keep all body

parts, jewellery, hair and

loose clothing away from

the openings

• Unit must be placed

on a stable flat surface to

reduce possible excessive

vibration and noise.

• Keep the unit away

from fire, flammable gas,

combustible products

or vapours, and corrosive

substances.

• Do not operate the unit

without filters.

• When transporting the

air purifier, always hold

the handles on the side

of the unit.

• To protect against

fire, electric shock and

personal injury, do not

immerse cord, plugs,

or appliance in water

or other liquid.

• Do not place on or near

a hot gas, electric burner

or heating appliance.

• Check voltage to be sure

that the voltage indicated

on the nameplate agrees

with your voltage.

IMPORTANT

SAFEGUARDS

FOR ALL

ELECTRICAL

APPLIANCES

• Unwind the power cord

fully before use.

• Do not let the power

cord hang over the edge

of a bench or table, touch

hot surfaces, or become

knotted.

• To protect against electric

shock do not immerse

power cord, power plug

or appliance in water

or any other substance.

• This appliance is not

intended for use by

persons (including

children) with reduced

physical, sensory or mental

capabilities, or lack of

experience or knowledge,

unless they have been

given supervision or

instruction concerning

use of the appliance

by a person responsible

for their safety.

• Children should be

supervised to ensure

they do not play with

the appliance.

• It is recommended

to regularly inspect the

appliance. Do not use the

appliance if power cord,

power plug or appliance

becomes damaged in

anyway. Return the

entire appliance to

the nearest authorised

Cli-Mate Service Centre

for examination and/

or repair.

• Any maintenance other

than cleaning should

be performed at an

authorised Breville

Service Centre.

• This appliance is

recommended for

household use only.

Do not use this appliance

for anything other than

its intended use. Do not

use in moving vehicles

or boats. Do not use

outdoors. Misuse may

cause injury.

• The installation of

a residual current

device (safety switch)

is recommended to

provide additional safety

protection when using

electrical appliances.

It is advisable that

a safety switch with

a rated residual operating

current not exceeding

30mA be installed in the

electrical circuit supplying

the appliance. See your

electrician for professional

advice.

WARNING

Fully unwind the cord before use.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

Components

Mist Outlet

Leather Tag

Lid

Control Panel

Components

CONTROL PANEL

Power Indicator Light

Maximum Mist Output Level

Minimum Mist Output Level

WATER TANK

Water Tank Cover

Water Tank

Note: Water tank shown upside down.

Power Button

Mist Output Level Button

Light Button

OPERATION INSTRUCTIONS

1. Remove the lid by lifting the leather tag.

2. Take out the water tank.

3. Turn the water tank upside down

and unscrew the water tank cover

(turn it anti-clockwise) and fill

water tank with clean water.

NOTE

Use only clean, cool tap water to fill the water

tank. Do not use hot water. Filtered or distilled

water is recommended to avoid scale build up

if tap water is too hard.

4. Replace the water tank cover. Turn the

water tank back up the right way and

place into the unit. Place the lid back on.

5. Locate a flat, stable location and plug

the power cord into the appropriate

electrical outlet. The Power indicator

light will illuminate red.

6. Switch on the unit by pressing the POWER

button

. The Power indicator light will

illuminate blue and the unit will begin to

work on default setting (MIN mist level).

7. To select MIST LEVEL: Press the Mist

level button

to select between MAX

(maximum) and MIN (minimum).

8. When water level in the water tank is

low, the unit will automatically stop

operation and power indicator light will

flash red. Follow steps 1-4 to continue.

9. Light Option: Push the Light

Button

to switch on/off the light

located underneath the unit.

PRODUCT SPECIFICATIONS

ULTRASONIC HUMIDIFICATION SYSTEM

MODEL CODE

CLI-AH201

POWER SUPPLY

20W

POWER CONSUMPTION

2.5 Litres

WATER TANK CAPACITY

150ml/h

EVAPORATION RATE

Up to 20m2

NOISE LEVEL

10 Hours

Functions

Care & Cleaning

• Do not rinse the unit or immerse the unit

in water.

• Do not use detergent to clean any water-

containing parts of the humidifier.

• Do not use abrasive cleaners or brushes

to clean.

• Clean the surface of the device with

a soft cloth.

SCALE

To reduce the possibility of scale (white mineral

deposits) build-up on the surface of the water

basins, inner surface of the water tank and

transducer, the following is recommended:
• Change the water daily.
• If possible, use distilled or demineralised

water.

• Drain, clean and thoroughly dry all parts

of the unit before putting it into storage.

STORAGE

If you do not plan to use the unit for an

extended period of time empty water tank and

base completely. Do not store with water inside

base or water tank. Allow all components to

dry completely before storing. Store in a cool

dry location.

CAUTION:

Before carrying out cleaning or maintenance of the product, always turn off and unplug

the cord from the power socket.

CLEANING THE TRANSDUCER

If mineral deposits are evident on or around

the transducer clean the surface with a soft,

clean cloth and a small amount of undiluted

white vinegar. To remove mineral deposits, put

5-10 drops of undiluted white vinegar on the

surface of the transducer. Leave to soak for 2-5

minutes. Use a cotton swab to gently loosen up

the scale of the surface. Rinse the transducer

with clean water and wipe clean.

IMPORTANT

Be careful not to damage the Transducer

during cleaning. Do not use any metal to

scrape it or touch with bare fingers.

Transducer

PROBLEM

POSSIBLE CAUSES

EASY SOLUTION

No Power.

•

Unit is not plugged into

wall socket.

•

Check connection to wall socket.

Little or no mist
is produced.

•

Insufficient water in water tank.

•

Fill water tank.

•

Scale build up on transducer.

•

Clean scale build up as per
instructions.

•

Water is too dirty or kept for
too long in the tank.

•

Clean water tank and refill with
fresh clean water.

•

The mist may not be clearly

visible depending on the balance
between the room temperature
and humidity.

Abnormal noise.

•

Very low water levels

in water tank.

•

Refill water tank.

•

Unit is on an uneven surface.

•

Reposition the unit to a stable
flat surface.

White dust accumulation.

•

Hard water used.

•

Follow instructions on page 9.

Troubleshooting

Notes

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.

Due to continued product improvement, the products illustrated/photographed

in this brochure may vary slightly from the actual product.

CLI-AH201 ANZ – A18

Web: www.breville.co.nz

Web: www.breville.com.au

Australian Customers
Phone:

1300 139 798

New Zealand Customers
Phone:

0800 273 845

Breville Customer Service Centre

Ask a Question ?