Full Text Searchable PDF User Manual
Owner's Manual
World-Class Auto Security
TM
SuperNova
Table of Contents
Standard Features of the SuperNova . . . . . . . . . . . . . . . . . . . . . 2
Your 3-button/3-channel remote controls . . . . . . . . . . . . . . . . . . 4
How to interpret the chirps and parking light flashes . . . . . . . . . . . . 5
Smart AutoArming™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
AutoArming enable/disable . . . . . . . . . . . . . . . . . . . . . . . . 5
Visual acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . 5
AutoArm & Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Instant AutoArming bypass . . . . . . . . . . . . . . . . . . . . . . . . . 5
UltraSecure™ valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Your secret valet code . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Definitions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Digit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Valet code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PlainView switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Entering a digit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Entering a code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
To enable valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Keyless entry in valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
To exit valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How to set your own secret valet code . . . . . . . . . . . . . . . . . . 7
Dual-Sensor Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specific malfunction identification . . . . . . . . . . . . . . . . . . . . 8
Automatic malfunction bypass . . . . . . . . . . . . . . . . . . . . . . . . 9
TotalRecall™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
FACT™— F
alse
A
larm
C
ontrol and
T
est
. . . . . . . . . . . . . . . . . . . . 9
Smart prior intrusion attempt alert . . . . . . . . . . . . . . . . . . . . . . 9
Automatic starter interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AutoLock/AutoUnLock™ . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Glass tampering sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
How to interpret the LED status indicator . . . . . . . . . . . . . . . . . . . 10
High-output siren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Long-term chirp silencing . . . . . . . . . . . . . . . . . . . . . . . . . 10
One-time remote controlled chirp muting . . . . . . . . . . . . . . . . 10
Siren duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SmartPowerUp™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
User-selectable features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programming table for user-selectable features . . . . . . . . . . . . . . . 11
Adding new remote controls . . . . . . . . . . . . . . . . . . . . . . . 13
How to erase the codes of lost or stolen remote controls . . . . . . . . 13
1
Standard Features of the SuperNova
✔
$2,000 AntiTheft Guarantee — See guarantee card for details.
✔
Lifetime Warranty— The control unit and remote controls are covered For as
long as you own your vehicle (see the warranty card for details).
✔
FACT™ — False Alarm Control and
Test — Eliminates recurring false alarms.
✔
A Pair of 3-Button/3-Channel Remote Controls — Fingertip control from up to
100 feet away for both you and a second driver of the vehicle.
✔
Patented Remote Control Code Learning and MultiRemote™ Recognition —
Allows you to add or delete, with just a few flicks of a switch, up to 4 different
Clifford 3-channel remote controls.
✔
Patent-Pending UltraSecure Coded Valet Mode™ — Ensures that no thief can
turn off your SuperNova like they can all other alarm brands.
✔
MultiCar Control — Allows you to command, with the same remote control, a
Clifford vehicle security system on your second and third cars.
✔
AntiScan™ — Blocks electronic scanners from disarming the alarm.
✔
Premier Remote Control Coding — 4.3-billion digital codes for more
protection against scanning. It would take a thief more than 19 years to scan
so many codes.
✔
Dual-Mode Chirp Silencing— Your choice of either long-term chirp silencing
or remote controlled chirp muting.
✔
Remote Door Lock/Unlock Outputs — Automatically locks/unlocks your
vehicle’s doors when you remotely arm/disarm your SuperNova (some
vehicles require an optional adaptor).
✔
User-Selectable AutoLock™/AutoUnLock — Automatically locks the doors
when you start the engine; unlocks the doors when the ignition is turned off.
✔
Deluxe Remote Keyless Entry in Valet Mode — Allows for remote door locking/
unlocking with visual confirmations even while the system is in valet mode.
✔
Built-In Parking Light Flasher — Visually confirms alarm status from a distance.
✔
Remote Courtesy Lighting — Automatically turns on your vehicle’s interior
light(s) when you remotely disarm; the lights stay on for 30 seconds or until
you start the engine, whichever occurs first.
✔
Patented Smart AutoTesting™ — Automatically tests for any malfunction and
specifically identifies any faulty point.
✔
Malfunction AutoBypass™ — Bypasses any trigger/sensor malfunction and
arms all other points.
2
Standard Features of the SuperNova
(cont.)
✔
Dual-Sensor Protection — The Magnetic Resonance Sensor detects
intrusion-related vibrations and the Glass Tampering Sensor detects attempts
to break any window.
✔
TotalRecall™ — Non-volatile memory stores the specific identity of the last
trigger or sensor activated.
✔
Patented Smart Prior Intrusion Attempt Alert — Identifies the trigger or sensor
activated during an attempted intrusion while you where away.
✔
Advanced CMOS Microprocessor — VLSI microprocessor commands and
monitors system functions more than 100,000 times per second, yet draws less
power than your vehicle’s clock.
✔
Full-Time Remote Panic — For your personal safety, you can remotely activate
the siren and flashing parking lights from inside or outside the vehicle, even
while driving.
✔
High-Output Siren — Very loud alarm sound with user-selectable
30/60-second duration and patented automatic noise abatement.
✔
Smart AutoArming™ — Automatically arms itself “passively” if you forget to
arm the system with your remote control.
AutoArming Enable/Disable — Enable or disable AutoArming any time.
User-Selectable AutoArm & Lock — Allows you to select whether the doors
will lock when the system automatically arms.
Visual Acknowledgment — Visually confirms initiation of the 30-second
AutoArming countdown.
Instant AutoArming Bypass — Lets you temporarily turn off AutoArming With
just a turn of the ignition key.
✔
Fault-Proof Starter Interrupt — Immobilizes the vehicle while the system is
armed; allows you to start the engine even in the unlikely event of a full
system failure.
High-Luminescence LED Status Indicator — Adds visual deterrence and
provides visual confirmation of alarm status.
✔
Hood/Trunk Trigger Input — To provide total perimeter protection (may require
optional pin switch installation).
✔
Patented SmartPowerUp — Activates the alarm if power is removed and then
restored in a theft attempt, but permits authorized power reconnection.
✔
User-Friendly Programming — A few flicks of the unique PlainView switch is all
it takes to tailor your SuperNova to your preferences.
3
Your 3-button/3-channel remote controls
The 3-button/3-channel remote control is a miniature
radio transmitter powered by a pair of tiny 3-volt
batteries. Range is up to 100 feet. Obstructions,
electrical interference, weather conditions or a weak
battery will reduce the range. Your 3-button/3-channel
remote is the key to your SuperNova system. It’s a
user- friendly device that transmits three unique digital
codes selected from more than 4 billion combinations.
You will use it to arm and disarm the system, lock and
unlock the doors, activate the panic feature and control
options such as remote engine starting and a remote
trunk release. Additional remote controls and remote
control batteries are available from any Authorized
Clifford Dealer, or call our 24-hour Customer Service
Department toll-free at (800) 824-3208.
TO ARM
THE SYSTEM . . . . . . .
Press button 1 once. You will hear two chirps and the parking
lights will flash twice. The dashboard LED will flash
repeatedly and the car doors will automatically lock (some
vehicles require an optional adaptor). Any attempt to break
into the vehicle will immediately disable the starter, sound the
siren and flash the parking lights.
TO DISARM
THE SYSTEM . . . . . . .
Press button 1 again. One chirp and one flash of the parking
lights will confirm disarming. In addition, the car doors will
automatically unlock and the interior lights will turn on and
stay on for 30 seconds or until you start the engine.
TO SILENTLY
ARM OR DISARM . . .
Press button 3. The system will arm or disarm with all the
indications noted above except the chirps.
TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 for 3 seconds. The lights will flash repeatedly
and the siren will blare for 30 or 60 seconds (user-selectable),
or until you press button 1 again to turn it off.
TO ACTIVATE
AN OPTION . . . . . . .
Button 2 may activate a remote controlled option, such as a
remote trunk release, IntelliStart remote engine starter,
NightVision’s remote headlight activation feature,the venting
and rolldown features of SmartWindows II, etc.
TO ACTIVATE
ANOTHER OPTION . .
If you have the optional 4-button/12-channel remote control,
button 4 can control yet another one of the options noted above.
4
How to interpret the chirps and parking light flashes
When you use the remote control, the system will respond with chirps (unless you have the
chirp muting feature turned on) and flashes the parking lights to confirm system status. The
meaning of these chirp/flash acknowledgments is as follows:
Chirps and
flashes
Meaning
1
Alarm is disarmed, you may enter the vehicle
2
Alarm is armed and protecting your vehicle
2 and then 4
Alarm is armed, but there is a sensor malfunction (see Smart AutoTesting on page 8)
3
Alarm is disarmed, but there was an intrusion attempt (see Smart Prior Intrusion Attempt on page 9)
4
Alarm is armed, but there is a trigger malfunction (see Smart AutoTesting on page 8)
Smart AutoArming™
If this feature is enabled and you forget to remotely arm your SuperNova, the system will
arm itself automatically (“passively”) 30 seconds after the vehicle doors are closed. For your
convenience, if you re-open any door(s) within the 30-second countdown, AutoArming
will restart from the beginning once all doors are closed. SuperNova includes all these
additional Smart AutoArming features:
AutoArming enable/disable:
If you prefer, you may deactivate or reactivate the
AutoArming feature. See User-selectable features on pages 11–12.
Visual acknowledgment:
Five seconds after you exit the vehicle and close all
the doors, the parking lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
AutoArm & Lock:
To ensure that you can’t accidentally lock your keys inside
the car, the system is factory-set not to lock the doors upon AutoArming. To
change this setting, see User-selectable features on pages 11–12.
Instant AutoArming Bypass:
Prevents AutoArming when fueling the vehicle and
other times when you wish to temporarily bypass AutoArming. To activate
Instant AutoArming Bypass, rapidly turn the ignition switch to “ON” then
“OFF.” You will hear a single siren chirp to confirm that the system will not
AutoArm. The system reverts to its normal operating mode when you next
start the engine.
NOTE: To prevent AutoArming of the system when fueling the vehicle, either use
the Instant AutoArming Bypass feature (noted above), or enable valet mode
(see page 6) or leave one of the doors open.
5
UltraSecure™ valet mode
Your secret valet code
Within seconds, thieves can disable all other alarm brands by hot-wiring the ignition and
flicking an easy to find “hidden” valet switch. Your SuperNova has safeguards that
absolutely ensure that a thief cannot enable the valet mode as a way of “turning off” your
system. How? To enable valet mode, the driver must first enter a secret valet code on the
PlainView switch. Your code will be a 1-to-3-digit number of your choosing. Each digit
can be any number from 1 to 9, (i.e. the code can be any number between 1 and 999,
except those that contain a zero).
Whenever the system is put in valet mode, all of the system’s security features are
switched off. At various times, you will need to turn the system off. For instance, when
having your car serviced, washed or parked by a valet.
NOTE: If you temporarily lose the use of your remote controls, you can disarm
the system by enabling valet mode.
Definitions
Digit:
A digit is defined as any number from 1 to 9, inclusive.
Valet code:
A valet code may be 1 to 3 digits:
A one-digit code = X = any number between 1-9
A two-digit code = XY = any number between 11-99 (excluding numbers with
zeros)
A three-digit code = XYZ = any number between 111-999 (excluding numbers
with zeros)
Remember, no code can have a zero.
PlainView switch:
A rocker switch mounted on your car’s dashboard or console.
The switch has three positions: 1.) Latched 2.) Center 3.) Spring-loaded
momentary. When you press the latched side, the switch remains in its pressed
position. When you press the momentary side, the switch bounces back to the
center position.
Entering a digit:
To enter a digit, you tap (press and release) on the momentary
side of the PlainView switch the number of times corresponding to the
numeral of the digit to be entered, followed by pressing to the latched side,
then returning the switch to its center position.
Entering a code:
If your code has only one digit, enter the code as described in
“Entering a digit,” then return the switch to its center position. If your code
has more than one digit, just repeat the above for each digit of your code, then
return the switch to its center position.
Currently, your factory-set valet code is the single digit “2.”
6
To enable valet mode:
1. Turn the ignition switch to its “ON” position or start the engine.
2. Enter your secret valet code on the PlainView switch, then return the switch to its
center position.
3. You now have 3 seconds to press the switch to its latched position (valet mode).
Once you have entered the valet mode, the system’s LED will glow continually
for on-going visual confirmation of valet mode.
Keyless entry in valet mode:
Even in valet mode, you will still be able to
remotely control all the convenience features. For instance, simply press
button 1 as if you were disarming. The doors will unlock (as indicated by one
flash of the parking lights) and the interior lights will illuminate. Press button
1 again and the doors will lock (indicated by two parking light flashes). You
can also use buttons 2 and 3 to activate options such as a remote trunk release.
To exit valet mode:
1. Turn the ignition switch to its “ON” position or start the engine.
2. Flick the PlainView switch back to its center position. The LED will turn off to
confirm that the system is in normal operating mode.
How to set your own secret valet code
Since all SuperNova systems have the same factory-set valet code (“2”), it is highly
advisable that you set your own valet code. You may choose any 1-, 2-, or 3-digit valet
code so long as it does not have any zeros. You can also change your valet code
whenever you want. To do so, use the following procedure.
1. Write down the 1-to-3 digit code you wish to use (remember, the code may not
have any zeros).
2. Turn your vehicle’s ignition switch to its “ON” position.
3. Enter your current valet code (if this is the first time you are setting a new code,
enter the factory-set code“2” by tapping the momentary [spring-loaded] side of
the switch twice, then pressing the latched side).
4. When the LED turns on, immediately tap and release the momentary side of the
switch 8 times (after the first three taps, you will hear a single chirp confirmation
each time you tap the momentary side — in this case for a total of 5 chirps).
5. Immediately after the 5th chirp, press the latched side of the switch, then enter
each digit of your new code. After each digit of your code is entered by pressing
the latched side, you will hear the same number of chirps as the digit just entered.
When done, return the switch to its center position. You will hear 1 chirp and the
LED will turn off. Turn the ignition off and you will hear 3 chirps to indicate that
you have exited programming mode.
6. VERY IMPORTANT: You must immediately test your new valet code to ensure
that you entered it correctly. To do so, turn the ignition on, enter your new code,
then press the latched side. The LED should be illuminated. NOTE: If the LED
does not illuminate, your new code was entered incorrectly. The system has
automatically reverted to the previous valet code.
7
Example of setting a new valet code:
Lets say you want to change the valet code from its original single-digit “2” code to a
double-digit code of “31.” You would do the following:
Turn the ignition on, enter your current code, tap the momentary side of the
switch 8 times, press the latched side, then enter the new code: momentary,
momentary, momentary, latched (3 chirps), momentary, latched (1 chirp),
center. Wait 2 seconds for the the system to exit program mode (1 chirp and
the LED turns off), then turn the ignition off (3 chirps confirm program mode exit).
That’s it, but be sure to perform step 6 on the previous page to verify your new code.
Dual-Sensor Protection
Your SuperNova has two sensors: A Glass Tampering Sensor that can detect attempts to
break any of the vehicle’s windows, and a Magnetic Resonance Sensor that detects
intrusion-related vibrations and impacts. This provides twice the level of protection
offered by most other brands of car alarms. For an even greater level of security,
consider Clifford Electronics optional sensors: OmniSensor (a digital analysis
vibration/impact sensor) and/or the Proximity Sensor (a passenger compartment radar
sensor, particularly important for convertible and other open-top vehicles).
Smart AutoTesting™
Each time you remotely arm your SuperNova, it will automatically perform an extensive
series of tests on all the system’s triggers and sensors. If a trigger malfunction is found,
you will be visually and audibly alerted immediately with 4 chirps and 4 flashes of the
parking lights instead of the usual 2 and 2. If a sensor is malfunctioning, you will
receive the usual 2 chirps and 2 flashes, then, a few seconds later, there will be 4 chirps
and 4 flashes.
Specific malfunction identification:
Your SuperNova not only tells you if the problem is a trigger or sensor, but it can also
indicate the specific trigger or sensor that is malfunctioning. This feature saves you time
and money since your installer won’t have to spend hours trying to determine where the
problem is. Here’s how it works, you receive the 4-chirp/4-flash signal upon remote
disarming:
1. When you insert your key and turn on the ignition, the LED indicator inside the
vehicle will be flashing, pause, then repeat.
2. Count the number of blinks in one cycle between pauses (for your convenience,
the blink cycle repeats 5 times) and refer to the chart below:
Number of LED blinks between pauses
Malfunction
1 blink
Glass Tampering or Magnetic Resonance sensor
2 blinks
Door trigger
3 blinks
Trunk or hood trigger
8
Automatic malfunction bypass
To provide the utmost protection even if a system component malfunctions, your
SuperNova will automatically bypass the faulty point and arm all other triggers and
sensors to provide the utmost possible protection until you can have the system serviced
by your local Authorized Clifford Dealer.
TotalRecall™
The system’s non-volatile memory records the identity of the last activated or
malfunctioning trigger or sensor, which allows your installer to instantly track down a
malfunction and save you substantial servicing costs. To identify the trigger or sensor
held in the system’s non-volatile memory, simply perform the following procedure:
1. With the ignition OFF, flick the PlainView valet switch to its latched side.
2. Press button 1 to “arm” the system, then again to “disarm.”
3. The LED will blink several times, pause, then repeat the blink cycle 4 times.
4. Count the number of blinks in one cycle and refer to the chart that follows:
Number of LED blinks per cycle
Trigger/Sensor that Last Activated or Malfunctioned
1 blink
Glass Tampering or Magnetic Resonance sensor
2 blinks
Door trigger
3 blinks
Trunk or hood trigger
FACT™— False Alarm Control and Test
With FACT, you’ll never experience repeated false alarms. If your siren goes off, DO
NOT remotely disarm the system while the siren sounds; allow it to run for the full siren
duration. Before sounding the siren a second time, the system automatically checks for
another activated trigger to verify that an intrusion is in progress. Should the siren sound
again, you will know for sure that someone is tampering with your vehicle. (To disable
FACT, see User-selectable features on pages 11–12.)
Smart prior intrusion attempt alert
When you remotely disarm, if you hear 3 chirps instead of the usual one chirp it means
that a trigger or sensor was activated in your absence. When you enter the vehicle and
turn on the ignition, the LED will blink several times, pause, then repeat the blink cycle
4 more times. Count the number of blinks in one cycle and refer to the chart below:
Number of LED blinks per cycle
Trigger/Sensor Activated
1 blink
Glass Tampering or Magnetic Resonance sensor
2 blinks
Door trigger
3 blinks
Trunk or hood trigger
Automatic starter interrupt
Your SuperNova automatically prevents engine starting while the system is armed.
9
AutoLock/AutoUnLock™
For your safety and that of your passengers, your SuperNova automatically locks the
doors when you start the engine and unlocks them when you turn off the ignition. If you
prefer, you may turn off the AutoLock and AutoUnLock features. See the
User-Selectable Features section on pages 11–12.
How to interpret the LED status indicator
The LED status indicator on your vehicle’s dashboard or console is used to inform you
of the system status:
LED Condition
Meaning
Off
System is disarmed and in normal operating mode (i.e., valet mode is off)
On
Valet mode is on, the vehicle can be driven or serviced without having to disarm
Flashing
System is armed and protecting your vehicle
Pause between flashes
Either a malfunction (see page 8) or an intrusion was attempted (see page 9)
High-output siren
Provides these additional features:
Long-term chirp silencing:
Whenever you wish, you may silence your
SuperNova’s arm/disarm chirps until you decide to restore them. The parking
light flashes will continue to provide visual confirmation of remote controlled
arming and disarming. See User-selectable features on pages 11–12.
Remote controlled chirp muting:
Remote controlled chirp muting capabilities
are especially valuable when parking late at night in a quiet residential area. To
arm or disarm silently, simply press button 3 on your remote control instead of
the usual button 1.
Siren duration:
When the system detects an intrusion attempt, the alarm is set to
sound for 30 seconds. However, if you prefer, you may change it to 60
seconds. See the User-selectable features on pages 11–12.
SmartPowerUp™
If power is ever removed and restored in an attempt to steal your car, SmartPowerUp
automatically will re-arm the system, sound the siren, flash the parking lights and
electronically interrupt the starter. To disconnect power for servicing, simply insert your
key into the ignition and turn it to the “ON” position before reconnecting power. Your
SuperNova recognizes this an an authorized power reconnection and will not alarm.
10
User-selectable features
Your SuperNova vehicle security system allows you to set many of its features to your
own personal preferences. We have made the programming procedures very simple: to
make a change, you just press the PlainView switch a few times.
The system comes from the factory with all of its features pre-programmed as noted in the
table below and on page 12. To change any of the settings, use the procedure noted. To
restore the feature to its factory setting, just repeat the procedure:
1. Select the feature you wish to program from the table below and on the following
page. Note the number of momentary (spring-loaded) presses.
2. Turn your vehicle’s ignition switch to its “ON” position.
3. Enter your valet code on the PlainView switch.
4. When the LED turns on, immediately tap and release the momentary side of the
switch the number of times indicated in the third column of the programming
table for the feature you selected (after the first three taps, you will hear a single
chirp confirmation each time you tap the momentary side).
a. If noted, perform the “secondary action.”
5. Return the switch to its center position and wait 3 seconds. You will hear 1 chirp
and the LED will turn off. Turn the ignition off and you will hear 3 chirps to
indicate that you have exited programming mode.
6. Repeat steps 1-5 for any other features you wish to program.
Programming table for user-selectable features
Feature
Factory
setting
# of
momentary
presses
Secondary
action
Program
completion
confirmation
Result
AutoArming
ON
4
—
1 chirp 3
seconds after
last step
Change state from
ON to OFF or vice-versa
AutoArm
& Lock
OFF
5
—
1 chirp 3
seconds after
last step
Change state from
ON to OFF or vice-versa
Arm/Disarm
Chirp
Confirmation
ON
6
—
1 chirp 3
seconds after
last step
Change state from
ON to OFF or vice-versa
Valet Code
See How to set your own secret valet code on page 7.
AutoLock/
AutoUnLock
ON
9
—
1 chirp 3
seconds after
last step
Change state from
ON to OFF or vice-versa
Siren
Duration
30 sec.
10
—
1 chirp 3
seconds after
last step
Change duration from 30 to
60 seconds or vice-versa
continued . . .
11
Feature
Factory
setting
# of
momentary
presses
Secondary
action
Program
completion
confirmation
Result
FACT —
False Alarm
Control and
Test
ON
12
—
1 chirp 3
seconds after
last tap
Change state from
OFF to ON or vice-versa
Add a New
Remote to
Channel 1
(arm/disarm)
—
13
Press remote control button 1
2 chirps
Button 1/channel 1 code
of the new remote control
has been memorized
Add a New
Remote to
Channel 2
(optional
remote
accessory)
—
14
Press remote control button 2
2 chirps
Button 2/channel 2 code
of the new remote control
has been memorized
Add a New
Remote to
Channel 3
(silent
arm/disarm)
—
15
Press remote control button 3
2 chirps
Button 3/channel 3 code of
the new remote control
has been memorized
Add a New
Remote to
Channel 4
(optional
remote
accessory)
—
16
Press remote control button 4
of the optional
4-button/12-channel
remote control
2 chirps
Button 4/channel 4 code
of the new remote control
has been memorized
Example
To change the AutoArming feature from its factory setting of “on” to “off,”
you would do the following:
Turn the ignition key to the ON position.
Enter your valet code, then immediately tap and release the
momentary side of the PlainView switch 4 times (you will hear a
single chirp upon the 4th press).
Wait 3 seconds. The system will sound one more chirp to confirm that
the AutoArming setting has been changed.
Turn the ignition off (you’ll hear 3 chirps to confirm exit of program
mode).
That’s all there is to it!
12
Adding new remote controls
Your SuperNova will respond to as many as four Clifford 3-channel remote controls.
You can buy additional remote controls from any Authorized Clifford Dealer (or call
our 24-hour Customer Service Department at 800-824-3208) and program them into the
system yourself. To add a new remote control to the system, use the procedures noted in
the User-selectable features section on pages 11–12.
How to erase the codes of lost or stolen remote controls
If one of your remote controls is ever lost or stolen, you can erase its digital codes from
the system memory to make sure that the missing remote control can never be used to
disarm your system. Just use the Adding new remote controls procedures noted in the
User-selectable features section on pages 11–12 for a total of four times (e.g., if you
have one remote control remaining, program it four times; if you have two remote
controls, program each twice).
13
© Copyright Clifford Electronics, Inc., 1993 31-062C/SNOM/593
The SuperNova vehicle security system is covered by
one or more of the following Clifford Electronics patents:
4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464;
4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;
5,157,375 and other patents pending