Full Text Searchable PDF User Manual

Handy Scanner
Instruction Manual
D3959
1. Key features
Colour /Monochrome (Mono) scan selection
600/300 dpi scan selection
Direct save JPG file to micro SD card
Supports micro SD card up to 32GB
Driver free to download for Windows 7 / Vista / XP and
Mac OS10.4 or above (direct plug-in, driver installation not required)
2. Description of parts
Part
Function
1
Battery door
For 2x AA alkaline batteries
2
Power/Scan
Power On/ Off: Press and hold this key for 2 seconds to
turn power on or off. In power on mode, press this button to
start scan, press this button again to stop
3
Error LED
indicator
Scanning too quickly: Red LED on
4
Scan LED
indicator
Ready to scan: Green LED on
5
LCD screen
Scanning status display
6
Resolution
Select High (600dpi)/Low (300dpi) resolution;
High/Low resolution mode icon will be displayed on status LCD
7
C/BW
Select Colour/Mono scan, Colour/Mono mode icon will be
displayed on status LCD
8
USB interface
Download photos to a computer via USB cable provided.
9
SD card slot
Micro SD card storage location.
10
Format button
Press this button to format the micro SD card.
3. Explanation of the status icons
Item Function
Description
1
SD card indicator
Photos will be stored to micro SD card
2
Battery indicator
Battery is full
Battery is flat
3
Effect indicator
Colour or Mono
4
Counting indicator
Show scanned files in micro SD card
5
Selected resolution
High: 600 dpi / Low: 300 dpi
4. Using the scanner
4.1 Installing the battery
1. Open the battery compartment (silver section on top of scanner)
2. Insert 2x AA alkaline batteries into the battery compartment.
3. Turn on the scanner by pressing the [POWER] button for 2 seconds.
4.2 Inserting a micro SD memory card (not included)
You must insert a micro SD Card (not supplied) to record and store your pictures. To insert the
micro SD memory card proceed as follows:
1. Turn OFF the scanner.
2. Insert the micro SD card into the micro SD card slot, gently press in until card clicks into
position.
Note:
Do not force the card into the slot; forcing may damage scanner and the micro SD memory
card. Align micro SD card position (as marked) and try again.
Note:
The micro SD memory card must be formatted before scanning. See the following
instructions.
4.3 Formatting the micro SD memory card
1. Insert a new micro SD card into the scanner, then turn on the scanner.
2. Press the format button and “F” shows on the LCD.
3. Press the Power/Scan button to start formatting the micro SD card.
4. SD card indicator will flash until format is complete.
4.4 Setting the resolution
Press the [DPI] button to select High/Low resolution.
High/Low resolution icon will be displayed on status LCD.
4.5 Setting the scan mode
Press the [C/BW] button to select Colour/Mono mode.
Colour/Mono icon will be displayed on status LCD.
4.6 How to scan
•
Make sure that the scanner is not connected to your computer with the USB cable.
•
Hold the document firmly by one hand.
•
Place the scanner on the start-scanning position.
•
Hold the scanner tight and press the scan button once.
•
Slide the scanner slowly and keep your hand stable to get the best quality picture.
•
Press the scan button again to stop scanning.

5. LED light indications
6. Connect to computer
Connect the scanner to your computer and view pictures on the computer monitor.
7. Specifications
Image sensor
A4 Colour Contact Image Sensor
Number of sensor
5136 dots (1st~5104 dots available)
Resolution
Low resolution: 300x300 dpi (default)
High resolution: 600x600 dpi
Maximum scanning
Speed for A4 size
document
Colour High resolution: 13 Seconds
Mono High resolution: 6.0 Seconds
Colour Low resolution: 3.0 Seconds
Mono Low resolution: 2.0 Seconds
600dpi color: 220 Photos (Min.)
600dpi mono: 290 Photos (Min.)
300dpi color: 780 Photos (Min.)
Capacity (Based on
1GB micro SD card.
Scan A4 size file,
the quantity of scans
varies depending on
the content complexity)
300dpi mono: 1280 Photos (Min.)
Scan width
8.27"
Scan length
300DPI: 50"(Max), 600DPI: 25"(Max)
File format
JPEG
LCD
Scanning status display
Auto Power Off
3 Minutes
USB Port
USB 2.0 high speed
External memory
micro SD Card
Standard Battery
2XAA alkaline batteries
8. Computer system minimum requirement
Operating System
Windows 7 / Vista / XP and Mac OS 10.4 or above
(direct plug-in, driver installation not required)
CPU
Pentium II or above
RAM 64MB
Interface USB
port
9. Troubleshooting
Problem
Cause
Solution
Cannot turn on the
scanner
1. Low battery power.
2. Battery not inserted
properly
Replace or install the
battery correctly
Pictures cannot be
saved when you are
scanning them
1. Micro SD card has not
been installed
2. Memory is full
3. The micro SD card has
not been formatted
properly
1. Install micro SD card
2. Download the pictures
from the scanner to the
computer to create
storage space
3. Please refer to section
4.3
Computer does not
recognize your
scanner when
connected. (You
cannot find
removable disk)
Connection failure.
Make sure all cable
connections are secured.
Restart the computer if
necessary
The battery life is
very short
Using wrong type of battery
Replace with new
2x AA alkaline batteries
Blurry images
The lens of scanner is dirty
Clean the lens with soft
dry cloth
ERR. LED is on when
scanning a document
Scanning speed is too fast
Press the Power/Scan
button to reset and scan the
document again.
GUARANTEE
IMPORTANT
Please do not return this product without first calling the Customer
Service number below:
0871 911 7003
Thank you for purchasing this product, which has been made to demanding
high quality standards and is guaranteed for domestic use against
manufacturing faults for a period of 12 months from the date of purchase.
This guarantee does not affect your statutory rights. If your product fails due to
a defect in material or workmanship during this period, please return it to the
place of purchase. Normal wear and tear is not covered under the guarantee.
Any guarantee is invalid if the product has been misused or subject to neglect
or an attempted repair other than by our own service centre.
Due to continuous product improvement, we reserve the right to change the
product specification without prior notice.
After Sales Customer Service:
Customer Service Department, Clifford James, Gladden Place, West
Gillibrands Industrial Estate, Skelmersdale, Lancashire, WN8 9SX, UK
Telephone: 0871 911 7003
E-mail
support@bvg-airflo.co.uk
Please retain for future reference.
Colours and contents may vary.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
Please note that all products with the symbol below must be recycled.