Full Text Searchable PDF User Manual
CLEVELAND RANGE products are warranted to the original purchaser to be free from defects in
materials and workmanship under normal use and service for the standard warranty period of one year
from date of installation or 18 months from date of shipment, which ever comes first.
CLEVELAND RANGE agrees to repair or replace, at its option, f.o.b. factory, any part which proves to
be defective due to defects in material or workmanship during the warranty period, providing the
equipment has been unaltered, and has been PROPERLY INSTALLED, MAINTAINED, AND OPERATED IN
ACCORDANCE WITH THE CLEVELAND RANGE OWNER’S MANUAL.
CLEVELAND RANGE agrees to pay any FACTORY AUTHORIZED EQUIPMENT SERVICE AGENCY
(within the continental United States, and Hawaii) for reasonable labor required to repair or replace, at our
option, f.o.b. factory, any part which proves to be defective due to defects in material or workmanship,
during the labor warranty period. This warranty includes travel time not to exceed two hours and mileage
not to exceed 50 miles (100 miles round-trip), BUT DOES NOT INCLUED POST START-UP, TIGHTENING
LOOSE FITTINGS, MINOR ADJUSTMENTS, MAINTENANCE, CLEANING OR DESCALING.
The standard labor warranty allows factory payments of reasonable labor required to repair or replace
such defective parts. Cleveland Range will not reimburse the expense of labor required to repair or
replacement of parts after the standard warranty period, unless and Extended Labor Warranty Contract has
been purchased to cover the equipment for the balance of the warranty period from the date of equipment
installation, start-up, or demonstration.
PROPER INSTALLATION IS THE RESPONSIBILITY OF THE DEALER, THE OWNER-USER, OR
INSTALLING CONTRACTOR, AND IS NOT COVERED BY THIS WARRANTY. Many local codes exist, and it
is the responsibility of the owner and installer to comply with these codes. Cleveland Range equipment is
built to comply with applicable standards for manufactures, including UL, A.G.A., NSF, ASME/Ntl. Bd., CSA,
CGA, ETL, and others.
Boiler (Steam Generator) MAINTENANCE IS THE RESPONSIBILITY OF THE OWNER-USER AND IS NOT
COVERED BE THIS WARRANTY. The use of good quality feed water is the responsibility of the Owner-
User (see Water Quality Recommendations below). THE USE OF POOR QUALITY FEED WATER WILL VOID
EQUIPMENT WARRANTIES. Boiler maintenance supplies, including boiler hand gaskets, are not warranted
beyond the first 90 days after the date the equipment is placed into service. Preventive maintenance
records must be available showing descaling per the applicable Cleveland Operators Manual for Boiler
Proration Program considerations.
WATER QUALITY RECOMMENDATIONS
TOTAL DISSOLVED SOLIDS
Less than 60 parts per million
Less than 20 parts per million
Less than 13 parts per million
Less than 30 parts per million
Greater than 7.5
The foregoing shall constitute the sole and exclusive remedy of original purchaser and the full liability
of Cleveland Range for any breach of warranty. THE FOREGOING IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, WHETHER WRITTEN, ORAL, OR IMPLIED, INCLUDING ANY WARRANTY OF
PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR PURPOSE, AND SUPERSEDES AND EXCLUDES
ANY ORAL WARRANTIES OR REPRESENTATIONS, OR WRITTEN WARRANTIES OR REPRESENTATIONS,
NOT EXPRESSLY DESIGNATED IN WRITING AS A “WARRANTY” OR “GUARANTEE” OF CLEVELAND
RANGE MADE OR IMPLIED IN ANY MANUAL, LITERATURE, ADVERTISING BROCHURE OR OTHER
CLEVLAND RANGE’S liability on any claim of any kind, including negligence, with respect to the
goods or services covered hereunder, shall in no case exceed the price of the goods or services, or part
thereof, which gives rise to the claim. IN NO EVENT SHALL CLEVELAND RANGE BE LIABLE FOR
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMGES, OR ANY DAMAGES IN THE NATURE OF
LIMITED EXTENDED WARRANTY COVERAGE
The purchase of a Limited Extended Warranty Contract extends the standard warranty coverage to the
purchased period of time (one to two years) from the date of installation, start-up, or demonstration,
whichever is sooner.
An additional two years Parts and Labor Warranty can be purchased with each piece of Cleveland
equipment for an additional 2% of the List Price per year. The 2% of list price charge will be the net invoice
amount for each year of extended warranty purchased.
Extended warranty must be purchased at the same time the equipment is purchased.
Extended Warranty has the same exclusions as stated in our standard warranty.