PDF User Manual

  1. Home
  2. Manuals
  3. Clef Audio PureSINE-1000se Owner's Manual

Clef Audio PureSINE-1000se Owner's Manual

Made by: Clef Audio
Type: Owner's Manual
Category: AC Power Distribution
Pages: 16
Size: 0.64 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

PureSINE-1000-se

O

W

N

E

R  

M

A

N

U

A

L

 


background image

WARNING:

 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an equilateral 
triangle, is intended to alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to 
alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature accompanying 
the appliance.

CAUTION:

 Changes or modifications not expressly approved by the 

party responsible for compliance could void the user's authority to 
operate the equipment.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

 TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.

2

 


background image

Please read all instructions and precautions carefully and completely

 

before operating your PureSINE-1000.

1.  

ALWAYS

 disconnect your entire system from the AC mains 

before connecting or disconnecting any cables, or when cleaning 
any component.

2. 

This product must be terminated with a three-conductor AC 
mains power cord that includes an earth ground connection. To 
prevent shock hazard, all three connections must 

ALWAYS

 be 

used.

3.   AC extension cords are not recommended for use with this 

product

4. 

NEVER

 use flammable or combustible chemicals for cleaning  

components.

5.  

NEVER

 operate this product with any covers removed.

6.

 

NEVER

 wet the inside of this product with any liquid.

 
7.  

NEVER

 pour or spill liquids directly onto this unit.

8.  

NEVER

 block airflow through ventilation slots or heat sinks.

9.  

NEVER

 bypass any fuse.

10.

 

NEVER

 replace any fuse with a value or type other than those 

specified.

11. 

 

NEVER

 attempt to repair this product. If a problem occurs, 

contact your PureSINE-1000 retailer.

12.

 

NEVER

 expose this product to extremely high or low 

temperatures.

13. 

 

NEVER

 operate this product in an explosive atmosphere.

14. 

 

ALWAYS

 keep electrical equipment out of the reach of children.

15. 

 

ALWAYS

 unplug sensitive electronic equipment during lightning 

storms.

Important Safety Instructions

3

 


background image

4

From all of us at Clef Audio

,

Thank you for choosing our product.

 


background image

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

 

Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

 

Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

 

Operating States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

 

Continuous Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Special Design Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

 

Venus Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

 

Polaris Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

 

Zero-Cross Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

 

Star Wiring Technic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Protections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . 10

 

Surge Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

 

Under & Over Voltage Protection. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . 10

 

Over Current Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

 

Over Temperature Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . .11

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Care & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . .14

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Table of Contents

5

 


background image

6

DO NOT attempt to lift or move the PureSINE-1000 without 
adequate assistance. Failure to follow the procedures 
included in this section may result in personal injuries and/or 
product damage.

DO NOT attempt to lift the PureSINE-1000 while bending at 
the waist. When lifting, stand as straight as possible using 
the leg muscles to lift.

When unpacking the PureSINE-1000:

•  

DO

 save all packing materials for possible future shipping

 

needs.

• 

DO

 inspect the PureSINE-1000 for signs of damage during

 

shipment. If damage is discovered, contact an authorized Clef 

 

Audio dealer for assistance making appropriate claims. 

Unpacking

Caution!

Warning!

 


background image

The PureSINE-1000se requires special care during installation to 
ensure optimal performance. Pay particular attention to the 
precautions included in this section and to other precautions included 
throughout this owner manual.

•  

 

DO

 review “Important Safety Instructions” and “Power  

 

Requirements   ”     before installing the PureSINE-1000se 

•  

DO

 place the PureSINE-1000se  on a solid, flat, level surface 

 

such  as a      table, shelf, or floor 

•  

DO

 allow at least a 6-inch (15cm) clearance behind the  

 

PureSINE-1000se  for the power cord to bend without crimping  

 

or straining.

•  

DO

 refer to “Dimensions” for assistance with custom   

 

installations.

•  

DO NOT

 place the PureSINE-1000se  on a windowsill or in 

 

another location in which it will be exposed to direct sunlight.

Before moving the PureSINE-1000se, make sure it is powered off with 
the rear panel power button. Then, make sure the power cord is 
disconnected from the AC mains connector and the electrical outlet.
 

•  

DO

 select a dry, well-ventilated location out of direct sunlight.

•  

DO

 allow at least a 2 to 3-inch (5 to 8cm) clearance above the

 

PureSINE-1000se for proper heat dissipation through air  

 

circulation. The PureSINE-1000se is designed for both passive  

 

convection cooling and active fan cooling.

•  

DO NOT

 obstruct the ventilation holes on the top and bottom

 

of the PureSINE-1000se or reduce airflow through the PS-1000

•  

DO NOT

 place the PureSINE-1000se on a thick rug or carpet or

 

cover the PureSINE-1000se with a cloth, as this might prevent  

 

proper cooling. If the PureSINE-1000se is placed on the floor, 

 

use a  thick piece of tempered glass to provide firm support and 

 

proper ventilation.

•  

DO NOT

 expose the PureSINE-1000se to high temperatures,

 

humidity, steam, smoke, dampness, or excessive dust. Avoid

 

installing the PureSINE-1000se near radiators and other heat- 

 

producing appliances.

Installation Considerations

Placement

Ventilation

Caution!

7

 


background image

8

When shipped, the PureSINE-1000se is configured for  220-230V AC 
power operation at 50Hz. Before operating the PureSINE-1000se 
make sure the AC mains connector label indicates the correct 
operating voltage for the current location.

The PureSINE-1000se has three operating states:

1.   Off

 

Power is disconnected from the AC mains connector.

2.   Standby

 

 Power is connected to a small power supply, and control circuits. 

 

The PureSINE-1000se consumes less than 30W of power.

3.   On

 

Power is connected to the AC mains connector and all power

 

components.

The PureSINE-1000se should be unplugged during lightning storms 
and extended periods of non-use. Otherwise, it is designed for 
continuous operation. For best performance, make sure power is 
connected to the AC mains connector at all times. During normal 
operation, do not use the power button (on the rear panel) to power 
off the PureSINE-1000se. Instead, use the on/off button to place the 
PureSINE-1000se into standby.

Power Requirements

Continuous Operation

Operating States

 


background image

Thank you for purchasing the PureSINE-1000se. The Puresine-1000se 
is designed to focus on AC line correction on both waveform and 
voltage level. The PS-1000se output is very low distortion Sinewave, 
less than 0.8% distortion, which is very close to ideal AC line 
waveform. The equipment connected to PS-1000 will operate at 
optimum condition resulting in gaining maximum performance. 
Besides AC line waveform correction, PS-1000se output also stabilizes 
at 230V+ 0.8% during the AC input fluctuation between 196V - 240V.

This advanced design circuit continuously monitors, analyzes and 
corrects the AC line output waveform and voltage level in analog real-
time mode, the AC output is very constant at all time which could not 
be found in conventional stabilizer in the market. 

This is Clef proprietary filter technology which is different from 
common filter design. The common filter design usually filters only 
high and very high frequency. Polaris filter in PureSINE-1000 is 
designed to work from 10KHz upward which is the frequency band 
that affects the sound and video quality. Polaris filter can reduce the 
noise in AC line over 

95%

 of total noise so the improvement of sound 

and picture quality can be clearly detected.

For video improvement, new Vega filter is used for reduce high 
frequency noise in video band. 

This circuit will remove any DC voltage that may exist on AC line.  The 
equipment will work more efficiently after the DC voltage is removed.

This is special technique which totally separate the wiring to each 
duplex. This will reduce the crosstalk between duplex and increase 
maximum current delivered the equipment. 

Special Design Features

Venus Engine

Polaris IV Technology

Vega Filter Technology

Polaris Plus Technology

9

AC From Electrical Outlet

AC From PureSINE-1000

Star Wiring Technic

 


background image

PureSINE-1000se is equipped with surge protection circuit that can 
absorb up to 13000 amps surge (8x20ms pulse) and up to 1,440 
Jules. This will protect PureSINE-1000se itself and the equipment 
connected to PureSINE-1000se from surge voltage from AC mains.
 
 In case of AC mains is under or over voltage; 

 

- AC mains between 196V-199V (under voltage) and 236V-240V 

 

(over voltage) The audible alarm will sound to alert user the 

 

abnormal voltage. The PureSINE-1000se will still function  

 

properly. The alarm sound can be turned off by 

Alarm On/Off 

 

switch

 on rear panel. 

 

- AC mains under 196V and over 240V This is extremely low or 

 

high voltage, PureSINE-1000se will shutdown itself to protect 

 

against too low or too high voltage. PureSINE-1000se can be 

 

turned on again by pressing 

On/Off button

 while AC mains is 

 

back to normal level, 196V-240V. 

The over-current protection circuit will continuously monitors the 
current PureSINE-1000se delivers to equipment. If the current is over 
5A (or equal to 1000VA load), PureSINE-1000se will shutdown itself. 
Press

 On/Off button

 again to turn on PureSINE-1000se but please 

make sure the the load is less than 5A or 1000VA. 

In some case that PureSINE-1000se is placed in bad ventilation area, 
the internal temperature may be too high. The circuit will shutdown 
PureSINE-1000se, wait until the unit cool down and press 

On/Off 

button

 to resume operation.

Protections

Surge Protection

Under & Over Voltage 

Protection

Over Current Protection

Over Temperature 

Protection

10

 


background image

11

The numbers in the front panel illustration shown above correspond
with the numbered items that begin below.

1.   Indicator LOGO

 

Indicates the operating state of the PureSINE-1000se.

 

1.1 Dimly lit Indicates that the PureSINE-1000se is in Standby.

  
 

1.2 Fully lit Indicates that the PureSINE-1000se is powered “on.”

  

2.   On/Off Button

 

Places the PureSINE-1000se into standby mode and takes the  

 

PureSINE-1000se out of standby mode. When the PureSINE-

 

1000se is powered on, pressing and releasing the On/Off button 

 

places  the PureSINE-1000se standby or takes thePureSINE-

 

1000se out of   standby

3. 

AC Input Display

 

Shows input voltage from AC mains.

 
4. 

AC Pure SineWave Output Display

 

Shows Regulated AC line output from PureSINE-1000se 

5. 

Ground Indicator

 

Shows when AC input ground wire is connected properly.

6. 

AC Phase Indicator

 

Shows when AC input Phase, Line and Neutral wires are connect  

 

properly.

7. 

Dimmer Switch

 

This button is located in the middle under the chassis.  Press to 

 

dim front panel LED display.

Front Panel

1

2

3

5

6

7

4

CLEF  AUDIO

PureSINE-1000se

Ground

Phase

 


background image

The numbers in the rear panel illustration shown above correspond
with the numbered items that begin below.

1.   AC Main Connector

 

Plug the supplied power cord into this connector and plug the 

 

other end into electrical outlet.

2.   Power (Breaker) Switch

 

Press this switch to "RESET" side to start PureSINE-1000se in 

 

standby mode. The indicator logo on front panel will dimly lit.  

3. 

Pure SineWave AC Outputs

 

These duplexes supply stabilized 230 Volts Pure-sinewave   

 

output. The  total consumption of all equipment must not exceed  

 

1000 Watts. 

 
4. 

High Current Output

 

This duplex supplies non-stabilized maximum 3,450 Watts (15A)

  

 output for high current equipment e.g. power amplifier, receiver,

  

subwoofer.   

5. 

Cooling Fan

 

This fan operates while internal temperature reach the set point 

to   reduce internal temperature.

6. 

Alarm On/Off Switch

 

To enable/disable high and low AC mains voltage audible alarm

Rear Panel

2

1

4

5

3

3

6

12

BREAKER 15A 230V

ALARM ON/OFF

Designed and Manufactured by 

CLEF-AUDIO COMPANY LIMITED

Bangkok THAILAND 

www.clef-audio.com

PURE SINEWAVE OUTPUTS 

TOTAL 1,000WATTS MAXIMUM

S/N

PureSINE-1000se

CAUTION!

AC 230V 50Hz, 15A MAX

HIGH PO

WER 

PURE SINEW

A

VE

A

UDIO OUTPUT

PURE SINEW

A

VE

VIDEO OUTPUT

 


background image

13

The PureSINE-1000se requires routine care and maintenance to 
ensure optimal performance. The bulleted items included in this 
section indicate maintenance procedures that should be performed on 
a regular basis.

Failure to perform the maintenance procedures included in 
this section may void the manufacturer’s warranty and/or 
standard repair policies.

•  

Use a feather duster or a low-pressure blower to remove dust

 

from the PureSINE-1000 se exterior surface.

•  

Use a soft, lint-free cloth to remove dirt and fingerprints from

 

the PureSINE-1000se exterior surface. Do not use a cloth made  

 

with steel wool or metal polish. If needed, this cloth can be

 

dampened with isopropyl alcohol. Do not dampen the cloth

 

with Benzene, acetone-based cleaners, and other commercial

 

cleaners. 

Do not apply liquid directly to the PureSINE-1000se exterior  
surface. Doing so may damage electrical components.

•  

Refer to “Installation Considerations” for information about

 

preventative maintenance.

Care & Maintenance

Caution!

Note

 


background image

196-240 V AC

L-N, N-G, L-G

800 V peak @ 3,000 amps, 275 VAC RMS  

1 nanosecond

13,000 amps (8 x 20 mS pulse)

1,440 Joules total 

>10 dB @ 10 kHz, >46 dB @ 100 kHz, >100 dB @ 1-10 MHZ  

1,000 VA (continuous)  

230 V AC < 0.8 % or +/- <1.5 V

5.0 A

50 Hz

-----------------------------------------------------------------------------------

15 A

0.2% or less

50 Hz 

------------------------------------------------------------------------------------

45 W

70 % 1000 W Load @ 240V AC Input 

Dual Digital True RMS Meter

< 0.2 % @ Input 3%

Width 430 mm (17.0"), Height 103 mm (4.0"),  Depth 325 mm (12.8”)

13.5 Kg net, 14.5 Kg in shipping carton

Specifications

Rated input voltage: 

Spike Protection Modes: 

Spike Clamping Voltage: 

Response time: 

Maximum surge current: 

Maximum spike energy:  

Noise attenuation:

  Rated output capacity:  

Rated output voltage:  

Rated output current:  

Output frequency:  

Instantaneous peak 

current capacity:  

Output waveform THD:  

Input frequency:  

No-load power 

consumption:  

Efficiency: 

Meter: 

Distortion Input/Output:  

Dimensions:

Weight:

 

14

 


background image

15

Dimension, PureSINE-1000se

432mm

324mm

89mm

104mm

BREAKER 15A 230V

ALARM ON/OFF

Designed and Manufactured by 

CLEF-AUDIO COMPANY LIMITED

Bangkok THAILAND 

www.clef-audio.com

PURE SINEWAVE OUTPUTS 

TOTAL 1,000WATTS MAXIMUM

S/N

PureSINE-1000se

CAUTION!

AC 230V 50Hz, 15A MAX

HIGH PO

WER 

PURE SINEW

A

VE

A

UDIO OUTPUT

PURE SINEW

A

VE

VIDEO OUTPUT

CLEF  AUDIO

PureSINE-1000se

Ground

Phase

 


background image

Clef Audio Company Limited

   

33/83 Soi Narknivas Narknivas Rd. Ladprao Bangkok 10230 THAILAND

Telephone: (662)-932-5981, (662)2-932-5982   Fax: (662)-932-5982

Email: info@clef-audio.com  Website: www.clef-audio.com