Full Text Searchable PDF User Manual
Ovation
Hi-Fi Components
clearaudio electronic
GmbH
Spardorfer Str. 150
D-91054 Erlangen
Tel. +49(0)
1805/059595
FAX +49(0)
09131/51683
www.clearaudio.de
www.analogshop.de
info@clearaudio.de /clearaudio copyright
2013
User manual
Made in Germany
Version-1.3_18-03-13_E
Ovation
User manual
Page 2
clearaudio electronic GmbH 2013
Dear
clearaudio
-customer,
You have purchased a state-of-the-art turntable, the
Ovation
, a world class product of
clearaudio
electronic GmbH.
Congratulations on your purchase!
With the
Ovation
turntable,
clearaudio
made use of the OSC (Optical-Speed-Control) technology
found in the Innovation turntables series by implanting it into a precision milled Panzerholz (bullet
proof wood) chassis. This chassis is combined with an anti – resonance mat that is capable of
absorbing a huge amount of energy. This is due to the use of more than 100,000 small stainless
steel balls which absorb unwanted resonance.
Thus, the turntable combines the latest technology and innovation in a classic design, at a perfect
price/performance ratio.
Please read this user manual carefully so that you can enjoy all the advantages of your
Ovation
-turntable. All information given will help to generate the best performance and avoid any
possible damages.
We hope you will enjoy your new
clearaudio
Ovation
-turntable.
clearaudio
electronic GmbH
Please read the warnings before connecting your
Ovation
-turntable to the mains supply.
CE-MARKING
The
clearaudio
Ovation
meets the regulations concerning electromagnetic disturbance
(EMC) and low-voltage appliances.
COPYRIGHT
Recording und reproduction of any sound-material may require the consent of the creator.
Please acknowledge the information given in the
-
Copyright Act 1956,
-
Dramatic and Musical Performers Act 1958,
-
Performers Protection Acts 1963 and 1072,
-
any more recent legal regulations.
WARNINGS
Don’t expose your turntable to rain or humidity.
Don’t handle the mains leads with wet hands.
Don’t place or insert anything into the equipment or through ventilation holes.
No naked flame sources, such as lighted candles, should be placed on the equipment.
Ovation
User manual
Page 3
clearaudio electronic GmbH 2013
User manual
1 – 14
Contents
1. Packaging overview
4
2. Set-up and operation
5
3. Service
11
4. Special directions
12
5. Technical data
13
Warranty information
14
Ovation
User manual
Page 4
clearaudio electronic GmbH 2013
1. Packaging overview
The
clearaudio
Ovation
-turntable is delivered in specially designed custom packaging.
Please check the contents according to the following list before you set up your new
clearaudio
Ovation
-turntable.
1. Layer (top):
T
op of bearing, belt,
fittings and accessories
(Quality and warranty card,
bearing oil)
If ordered as set:
tonearm and/or pickup
2. Layer (middle):
Turntable - chassis
3. Layer (bottom):
Platter, aluminium sub-platter
Ovation
User manual
Page 5
clearaudio electronic GmbH 2013
IMPORTANT NOTICE:
Please double check the tightness of all bolts and armboard mounting
hardware, as temperature fluctuations during transit may have caused the hardware to become
loose.
2. Set-up and operation
The
Ovation
-turntable consists of several components, as described in No 1 (Packing overview).
The set up is easy, as some of the components are pre-assembled at the factory.
Please make use of the white gloves enclosed in order to avoid scratches or unwanted fingerprints
(e.g on the platter).
Please follow the instructions step by step:
The
Ovation
requires a space of at least 16.54 inch x 13.78 inch for positioning.
13,78 inch / 350 mm
16,54 inch
/ 420 mm
Pic. 1:
Setting up space
Ovation
User manual
Page 6
clearaudio electronic GmbH 2013
2.1
Place the pre-mounted chassis on your hifi-rack or another suitable surface.
2.2
Please remove the protective seal from the bearing shaft and place two drops of the synthetic
bearing oil on the ceramic bearing shaft. Slip the bearing top onto the bearing shaft of the
turntable.
Pic. 2:
Ovation chassis
Pic. 3:
Bearing oil
Ovation
User manual
Page 7
clearaudio electronic GmbH 2013
2.3
Now you can set the bearing upper part carefully onto the bearing.
To avoid damages make sure you slide the bearing upper part slowly and carefully on the polished
ceramic shaft.
2.4
Now you can set the sub-platter carefully onto the bearing.
First remove the security mat on the backside of the sub-platter
(security tape for OSC - graduated collar (Optical Speed Control)).
To avoid any damage, make sure you slide the sub-platter slowly and carefully onto the bearing.
After that, take the included belt and place it around the motor and the sub-platter. At this point the
sub-platter will be higher than the pulley. This is normal, as the CMB requires the weight of the
platter to fully engage it.
Pic. 4:
Fitting the bearing upper part
Pic. 5:
Setting the sub-platter
Pic. 5.1:
Moving the belt
Ovation
User manual
Page 8
clearaudio electronic GmbH 2013
Please note:
The marks (dots) on the sub-platter and the top of the bearing have been carefully measured.
Please make sure they align exactly as shown in picture below:
2.5
Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the
platter slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the
platter does not slip or fall on your turntable.
Pic. 6:
Congruence of sub-platter and bearing markings
Pic. 7:
Setting the platter onto the bearing
Ovation
User manual
Page 9
clearaudio electronic GmbH 2013
2.6
Please check with the bubble level gauge, if your
Ovation
turntable is in a level
position.
You can adjust each of the turntable’s feet to get the turntable level.
Only if the turntable is in a level position will you get the best results with your
turntable.
Adjust the height be turning the threaded spike feet. When the table is
properly level, lock the feet in place with the nut (see below).
2.7
For tonearm and cartridge mounting please refer to the user manual of the respective
manufacturer.
Now you can connect the
Ovation
turntable with the main supply.
Pic. 8.1:
Adjustment of the height
Pic. 8:
Adjustment of the height
Pic. 9:
Connection to the main supply
Ovation
User manual
Page 10
clearaudio electronic GmbH 2013
2.8
Speed fine adjustment
The motor adjustment is already pre set at the factory. Because of handling or because of soiling of
the sensor or the sensor ring, some small speed deviations can occur.
Please check the speed before using the turntable for the first time.
For the correct adjustment of the speed, please put the recommended
clearaudio
Stroboscope
Testrecord on the platter. Follow the instructions of the Stroboscope Testrecord user manual. To
check the speed with highest accuracy please use the
clearaudio
Speed Light (AC039)
On the backside (close to the power supply input) of your turntable there are three setting
trimmers:
- right trimmer = setting 33 1/3 rpm
(near power supply jack)
- middle trimmer = setting 45 rpm
- left trimmer = setting 78 rpm
If you would like to adjust the 33 1/3 speed, take the aluminium screw driver (see accessories) and
turn the right trimmer until you have reached the right speed according to the Stroboscope
Testrecord (see user manual “Stroboscope Testrecord”).
-
Turning the trimmer counter clockwise = reduces the turntable speed
-
Turning the trimmer clockwise = increases the turntable speed
Please proceed with the speed adjustment for 45 rpm and 78 rpm in the same way!
Pic. 10:
Speed fine adjustment
Ovation
User manual
Page 11
clearaudio electronic GmbH 2013
Please note:
If the turntable does not reach the correct speed, the sensor or the scale ring could be dirty or
dusty.
To clean the sensor, please take off the two platters very carefully!
Clean the sensor and the scale ring with a little isopropyl alcohol and a cotton bud.
Be careful to avoid scratching the sensor or the scale ring!
If the motor has further speed issues please contact your nearest authorized
clearaudio
dealer or
directly the
clearaudio
factory.
Now you are finally ready to play your vinyl records!
We wish you a lot of pleasure with your new
Ovation
- turntable.
3. Service
If any service or repair on all
clearaudio
products is necessary, please contact your dealer /
distributor or contact
clearaudio
directly. We can inform you about your nearest service location.
Transportation advice:
If any transportation of the
Ovation
-turntable should be necessary, please always remove the
turntable platter. Otherwise serious damage can occur!
The bearing hole needs to be covered as well, to avoid any dust coming into the bearing. Always
take of the pulley of the motor unit as well, to prevent the motor shaft from any damages.
PLEASE RETAIN ALL ORIGINAL PACKAGING.
You will need it if this unit has to be transported
and/or shipped. Any further questions you may have about this turntable should be directed to the
distributor or directly to
clearaudio
at
clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49-(0)1805/059595
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
Ovation
User manual
Page 12
clearaudio electronic GmbH 2013
4. Special directions
The
clearaudio
Ovation
does not require extensive maintenance.
If the
Ovation
turntable is not in use for a long period of time, please disconnect the wall wart
supply from the mains supply.
Every year, or if you if you notice speed variations, you can lubricate the bearing of the turntable
platter with the supplied oil. Please use 4 to 5 drops of the oil onto the bearing shaft.
For a new that turntable has recently been shipped, has been un-used for a significant period of
time, or has recently been shipped or transported to a different environment, it is advisable to
double-check and re-tighten all chassis and armboard bolts on the underside of the turntable. Due
to the various materials used in the turntable plinth that can expand or contract at different rates as
a result of temperature and humidity changes, these bolts may become loose and need to be re-
tightened.
Don’t use harsh cleaning fluids for the
Ovation
turntable. A few drops of window cleaner diluted in
water is recommended. Dry all cleaned parts with a fine cotton cloth carefully. Under
no
circumstances should
spirit
or
alcohol
based fluids be used, as this could cause surface damage!
Please take care not to damage the power cord. Any damage should be repaired by authorized
personnel only. A damaged power cord must be exchanged immediately!
To achieve the full
clearaudio
warranty, it is necessary that you fill out and send your warranty
sheet to
Musical Surroundings
within 90 days after purchase. Only if the product is returned in
it’s original packing can warranty service be provided.
Transportation advice:
If any transportation of the
Ovation
-turntable should be necessary, please always remove the
turntable platter. Otherwise serious damage can occur!
The bearing hole needs to be covered as well, to avoid dust entering into the bearing. Always take
off the pulley of the motor unit as well, to prevent the motor shaft from being damaged.
Ovation
User manual
Page 13
clearaudio electronic GmbH 2013
5. Technical data
Construction:
Resonance-optimised chassis,
We recommend: tonearm with magnetic
bearing technology (
clearaudio
Magnify or
Verify)
Speed ranges:
33 1/3, 45 and 78 RPM
Drive unit (motor):
Decoupled DC motor in chassis, resonance
damping device
Rumble:
DIN IEC 98 by method A / 92 dB
Bearing:
Polished ceramic shaft in a sintered bronze
bushing, magnetic bearing (CMB)
Platter:
Black coloured POM, 38 mm thickness
Speed variation:
+/ - 0.03 %
Weight:
Approx. 13,5 kg incl. motor
Dimensions:
Width/Depth/Height
In mm approx: 420 x 350 x 115
in inch approx: 16.54 x 13.78 x 4.53
Warranty*:
2 years (5* years)
* Only if the warranty card is filled out correctly and sent back in time to
clearaudio
.
Clearaudio
electronic is not responsible for typographical errors in descriptions. Technical specifications
subject to change or improvement without prior notice. Availability as long as stock lasts.
Copies and imprints- also only in extracts – require written conformation through
clearaudio
electronic
GmbH; Germany
clearaudio electronic GmbH 2011
Version: March 2013
Ovation
User manual
Page 14
clearaudio electronic GmbH 2013
The warranty time for the
Ovation
turntable is 2 years.
To achieve the full
clearaudio
warranty of 5 years, it is necessary that you fill out and send the
corresponding part of the warranty registration certificate /card back to
clearaudio
, within two
weeks after purchase. Only if the product is returned in it’s original packing
clearaudio
can provide
the warranty of 5 years.
ENGLISH
WARRANTY
For warranty information, contact your local clearaudio distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valuable purchase.
It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with clearaudio.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. Your purchase receipt or invoice is adequate
for such proof.
FOR U.K. ONLY
This undertaking is in addition to a consumer's statutory rights and does not affect those rights in any way.
FRANÇAIS
GARANTIE
Pour des informations sur la garantie, contacter le distributeur local clearaudio.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente d'un achat de valeur. La conserver en lieu sur pour s'y reporter aux fins d'obtention d'une couverture
d'assurance ou dans le cadre de correspondances avec clearaudio.
IMPORTANT
Pour l'obtention d'un service couvert par la garantie, il incombe au client d'établir la preuve de l'achat et d'en corroborer la date. Le reçu ou la facture
constituent des preuves suffisantes.
DEUTSCH
GARANTIE
Bei Garantiefragen wenden Sie sich bitte zunächst an Ihren clearaudio-Händler.
Heben Sie Ihren Kaufbeleg gut auf.
WICHTIG!
Die Angaben auf Ihrer Quittung erlauben uns die Identifizierung Ihres Gerätes und belegen mit dem Kaufdatum die Dauer Ihrer Garantie-Ansprüche.
Für Serviceleistungen benötigen wir stets die Gerätenummer.
Diese finden Sie auf dem Typenschild auf der Rückseite des Gerätes oder auch in der beigefügten Garantie-Registrierkarte.
NEDERLANDS
GARANTIE
Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke clearaudio.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een waardevol artikel en dienen op een veilige plaats bewaard te worden voor evt, verwijzing
bijv, in verbend met verzekering of bij correspondentie met clearaudio.
BELANGRIJK
Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de consument een gedateerd bewijs van aankoop te tonen. Uw
kassabon of factuurzijn voldoende bewijs.
ITALIANO
GARANZIA
L’apparecchio è coperto da una garanzia di buon funzionamento della durata di un anno, o del periodo previsto dalla legge, a partire dalla data di acquisto
comprovata da un documento attestante il nominativo del Rivenditore e la data di vendita. La garanzia sarà prestata con la sostituzione o la riparazione
gratuita delle parti difettose.
Non sono coperti da garanzia difetti derivanti da uso improprio, errata installazione, manutenzione effettuata da personale non autorizzato o, comunque, da
circostanze che non possano riferirsi a difetti di funzionamento dell’apparecchio. Sono inoltre esclusi dalla garanzia gli interventi inerenti l’installazione e
l’allacciamento agli impianti di alimentazione.
Gli apparecchi verranno riparati presso i nostri Centri di Assistenza Autorizzati. Le spese ed i rischi di trasporto sono a carico del cliente. La casa costruttrice
declina ogni responsabilità per danni diretti o indiretti provocati dalla inosservanza delle prescrizioni di installazione, uso e manutenzione dettagliate nel
presente manuale o per guasti dovuti ad uso continuato a fini professionali.
ESPAÑOL
GARANTIA
Para obtener información acerca de la garantia póngase en contacto con su distribuidor clearaudio.
GUARDE SU RECIBO DE COMPRA
Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como
referencia cuando tenga que hacer uso del seguro o se ponga en contacto con clearaudio.
IMPORTANTE
Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuándo efectuó la compra. En este caso, su recibo de
compra será la prueba apropiada.