Full Text Searchable PDF User Manual
Advance e720 Accelerator
Card
User Guide
HP BladeSystem c-Class Type II
Mezzanine Card
Document No.
06-UG-1588
Revision:
1.B
September 2008
Table of contents
Advance
TM
e720 Accelerator Card User Guide
2
Document No.
06-UG-1588
Revision:
1.B
ClearSpeed Technology plc
Table of contents
Table of contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Accessing documentation online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Contacting technical support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1
Hardware prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2
How to get the driver software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3
Card installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2
Features and general description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1
Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3
Troubleshooting - general guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1
Solving the problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1.1
Finding the cause of the problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1.2
Contacting ClearSpeed Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1
PCI configuration space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2
Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.4
Thermal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.4.1
Temperature monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.4.2
Temperature shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.5
Patents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Advance
TM
e720 Accelerator Card User Guide
Preface
Document No.
06-UG-1588
Revision:
1.B
3
ClearSpeed Technology plc
Preface
The guide describes the features of the Advance
TM
e720 accelerator card and gives you
information on diagnostics, troubleshooting, and updating the firmware.
This guide also assumes that you have experience configuring Microsoft Windows XP, Red
Hat® Enterprise Linux, or SUSE® Linux.
Accessing documentation online
You can view or download the documentation related to the Advance e720 accelerator
board and associated software at:
http://support.clearspeed.com/documentation/
Contacting technical support
If you have technical questions about this product that are not answered in this
documentation, check the solutions knowledgebase or contact ClearSpeed support at:
http://support.clearspeed.com/
Before you start
Advance
TM
e720 Accelerator Card User Guide
4
Document No.
06-UG-1588
Revision:
1.B
ClearSpeed Technology plc
1
Before you start
This chapter gives you an outline on what to do before you install your Advance e720
accelerator board. We recommend that you read the steps outlined in
Figure 1
.
Figure 1. Guidelines to follow before you install
See
Card Installation
on page 6
Check your computer
meets requirements
for installation
See
Hardware Prerequisites
You may need to refer to them to help you to:
* open the unit
Download the driver
See
How to get the driver
software
on page 6
Make sure you have
a copy of the system
manufacturer’s
instructions
software
Step 1
Step 2
Step 3
Step 4
Check your card
fits the site before
you attempt to
Refer to your manufacturer’s Installation
Step 5
Make sure you read
the procedures to
follow when handling
the card
install it
* identify an available HP BladeSystem
on page 5
Guide.
Please refer to the Bibliography for further details.
c-Class Type II mezzanine connector
(Type II Mezzanine)
Advance
TM
e720 Accelerator Card User Guide
Before you start
Document No.
06-UG-1588
Revision:
1.B
5
ClearSpeed Technology plc
1.1 Hardware
prerequisites
To install the Advance e720 accelerator board, you will need;
z
an HP BladeSystem c-Class server or equivalent comprising of a 64-bit Intel or AMD
x86 processor (or compatible).
z
An available Type II mezzanine connection. See manufacturers instructions;
[1] on
page 11
.
1.2
How to get the driver software
Before you can use the Advance e720 accelerator board, you must install the runtime
package and the driver software. The latest versions of the software and software
installation instructions can be found on the ClearSpeed support website:
http://support.clearspeed.com/
This website also provides the latest list of supported operating systems.
1.3 Card
installation
The ClearSpeed Advance e720 Accelerator card is a Type II Mezzanine card. The type
determines where it can be installed in the server blade. Refer to your manufacturer's
detailed installation instructions to identify and install the Advance e720 Type II card (refer
to
[1] on page 11
).
Caution:
It is very important when inserting the card to observe the following
(1)
:
z
Always follow the precautions for handling electrostatic sensitive devices by using the
antistatic wrist strap provided.
z
Always follow the instructions provided by your system manufacturer when installing
new hardware.
z
Do not use excessive force when inserting the Advance e720 accelerator board into
the mezzanine connector as this can damage the motherboard.
1. Please refer to the HP Blade Server User Guide for HP specifc control processes.
Features and general description
Advance
TM
e720 Accelerator Card User Guide
6
Document No.
06-UG-1588
Revision:
1.B
ClearSpeed Technology plc
2
Features and general description
The Advance e720 accelerator card (shown in
Figure 2
) is based on the CSX700
double-precision, floating-point accelerator. It is designed for use in HP blade servers and
systems that provide Type II mezzanine compatible connectors.
Figure 2. Advance CSX700 mezzanine card.
The Advance e720 accelerator card uses a single CSX700 processor. The processor
implements the PCI Express host interface, permitting high data transfer rates directly with
the processor. To manage the e720, an FPGA device is used. The firmware represents the
FPGA design image and can be upgraded, as described in the [5], Firmware Update
Release Notes.
The Advance e720 accelerator card uses dual channel bus-mastering DMA to achieve a
high peak bandwidth to the host system. Each card has 2 GBytes of local card memory with
error correction. It includes onboard temperature monitoring of the processor and board.
The Advance e720 accelerator card features the CSX700 data-parallel floating-point
coprocessor. The processor is energy efficient providing 3.84 GFLOPS per watt
(96 GFLOPS/25 watts). Each processor consists of two computation arrays, each are fully
interconnected through a common address map, including access to the 1 GByte of local
DDR2 SDRAM attached to each array, giving a total of 2 GBytes for the card. The DRAM is
72 bits wide, including 8 bits of error correcting code (ECC). This allows correction of
single-bit errors and detection of multiple-bit errors.
Advance
TM
e720 Accelerator Card User Guide
Features and general description
Document No.
06-UG-1588
Revision:
1.B
7
ClearSpeed Technology plc
2.1 Firmware
Board level management is implemented in an FPGA. At power-on, the FPGA logic
configuration is loaded from a flash memory device. The contents of the flash device can be
re-programmed to upgrade functionality or performance using a software utility supplied by
ClearSpeed. This utility runs on the host system and reprograms the flash device through
the Advance e720 accelerator card’s register space.
For more detailed information, see
[4]: Firmware Installation Guide
.
Troubleshooting - general guidelines
Advance
TM
e720 Accelerator Card User Guide
8
Document No.
06-UG-1588
Revision:
1.B
ClearSpeed Technology plc
3
Troubleshooting - general guidelines
If you encounter an error when using the Advance e720 accelerator board, you need to
isolate the cause of the problem.
When installing multiple cards and software in a system, install each in turn and restart the
system each time. Similarly, if you have already installed the Advance e720 accelerator
board and software and you experience problems, remove or uninstall each in turn to
establish which one is causing the problem.
3.1
Solving the problem
3.1.1
Finding the cause of the problem
To find out what is causing the problem, we recommend that you check the following:
z
Check your Advance e720 accelerator board is installed correctly. See the relevent HP
Blade Server User Guide
(1)
.
z
Check you installed the drivers correctly.
Whenever you fix a problem and reboot, run the tests again.
3.1.2
Contacting ClearSpeed Support
If none of the above helps solve your problem, refer to the ClearSpeed solutions
knowledgebase or you can report your problem by submitting an online report via the
ClearSpeed support website at:
http://support.clearspeed.com/support/solutions/
1. You may use the Hewlett Packard BladeSystem c-Class Onboard Administrator software, or the BladeServer’s
Lights Out remote management feature, to confirm installation of the ClearSpeed e720 Mezzanine Card. Refer
to the HP Onboard Administrator or HP iLO2 documentation for full details.
Advance
TM
e720 Accelerator Card User Guide
Specifications
Document No.
06-UG-1588
Revision:
1.B
9
ClearSpeed Technology plc
4 Specifications
This chapter lists the specifications for the Advance e720 accelerator board.
4.1 PCI
configuration
space
Table 1
shows the register values for the Type 00h PCI configuration space header.
Table 1. Register values for PCI configuration space
4.2 Mechanical
The Advance e720 accelerator board is compliant with with
PCI Express Specification
Revision (1.1)
and the HP BladeSystem c-Class Mezzanine card Common Specification.
The Advance e720 is a Type II mezzanine card format.
4.3 Electrical
The power requirements for the Advance e720 accelerator board are outlined in
Table 2
.
4.4 Thermal
To keep the CSX700 cool, the Advance e720 accelerator card is fitted with a passive
heatsink. The passive heatsink is an aluminium finned radiator that dissipates heat through
convection. For the passive heatsinks to work, they require airflow moving across the fins.
To ensure that the Advance e720 accelerator board is operating within the published limits,
the BladeSystem’s ambient operating temperature should be as specified in
Table 3
.
Vendor ID =
0x1942
Device ID =
0xE711
Classcode ID =
0x0B4000 (Co-processor)
Subsystem Vendor ID =
0x1942
Subsystem ID =
0xE731
Feature
Specification
Current
0.5A @ 3.3 V
2.1A @ 12 V
Maximum power consumption
25W (25W dissipation is application dependant)
Thermal design power
25W
Table 2. Power requirements
Specifications
Advance
TM
e720 Accelerator Card User Guide
10
Document No.
06-UG-1588
Revision:
1.B
ClearSpeed Technology plc
4.4.1 Temperature
monitoring
The CSX700 and the FPGA contain on-die temperature-sensing diodes which are
connected to temperature-monitoring devices. Each device measures the remote
temperature (temperature of the measured die) and the local temperature (temperature of
the monitor chip itself). The temperature monitors signal warnings if the temperatures rise
above the thresholds shown in
Table 4
.
There are two warnings:
z
Temperature alert. This provides an indication to the driver software that the device is
becoming hot.
z
Critical temperature. This turns off the device before it gets hot enough to cause
permanent damage.
4.4.2 Temperature
shutdown
When the CSX700 reaches a critical temperature it is immediately held in reset so that it can
cool and avoid being damaged. When the CSX700 has cooled by more than 25
o
C from the
critical threshold, it is brought out of reset.
Following a critical temperature reset your blade server may require a reboot to reconnect to
the ClearSpeed e720.
4.5 Patents
This product is protected by US Patent 7346722 and 7363472; UK patents 2341770,
2348980, 2348984, 2348974, 2348973, 2348971, 2391093, 2394815 and 2390506, or
international equivalents. Other patents pending.
Condition
Operating specification
Storage specification
Temperature
10
o
C to 35
o
C (50
o
F to 95
o
F)
-10
o
C to 70
o
C (14
o
F to 158
o
F)
Relative humidity
10 to 90% noncondensing
up to 90% noncondensing
Table 3. Specifications for ambient conditions
Measurement
Temperature thresholds
Alert
Critical
Local temperatures
85
o
C (185
o
F)
N/A
Remote (die) temperatures
90
o
C (194
o
F)
110
o
C (230
o
F)
Table 4. Temperature warning thresholds
Advance
TM
e720 Accelerator Card User Guide
Bibliography
Document No.
06-UG-1588
Revision:
1.B
11
ClearSpeed Technology plc
Bibliography
[1]
HP BladeSystem c-Class Mezzanine Card Installation Instructions
(HP Part Number 413773), for example:
http://h20000.www2.hp.com/bc/docs/support/SupportMan-
ual/c00700793/c00700793.pdf
[2]
Software Installation Instructions for Linux
Document Numbers: 06-UG-1328
ClearSpeed Technology
[3]
Software Installation Instructions for Windows XP
Document Numbers: 06-UG-1329
ClearSpeed Technology
[4]
Firmware Installation Guide
http://support.clearspeed.com/downloads/firmware/
Document Number:
02-XX-1510
ClearSpeed Technology
Advance
TM
e720 Accelerator Card User Guide
12
Document No.
06-UG-1588
Revision:
1.B
ClearSpeed Technology plc
HP is a registered trademark of Hewlett-Packard Development Company, L.P., a Texas Limited Partnership
1. Information and data contained in this document, together with the information contained in any and all associated ClearSpeed
documents including without limitation, data sheets, application notes and the like ('Information') is provided in connection
with ClearSpeed products and is provided for information only. Quoted figures in the Information, which may be performance,
size, cost, power and the like are estimates based upon analysis and simulations of current designs and are liable to change.
2. Such Information does not constitute an offer of, or an invitation by or on behalf of ClearSpeed, or any ClearSpeed affiliate to
supply any product or provide any service to any party having access to this Information. Except as provided in ClearSpeed
Terms and Conditions of Sale for ClearSpeed products, ClearSpeed assumes no liability whatsoever.
3. ClearSpeed products are not intended for use, whether directly or indirectly, in any medical, life saving and/ or life sustaining
systems or applications.
4. The worldwide intellectual property rights in the Information and data contained therein is owned by ClearSpeed. No license
whether express or implied either by estoppel or otherwise to any intellectual property rights is granted by this document or
otherwise. You may not download, copy, adapt or distribute this Information except with the consent in writing of ClearSpeed.
5. The system vendor remains solely responsible for any and all design, functionality and terms of sale of any product which
incorporates a ClearSpeed product including without limitation, product liability, intellectual property infringement, warranty
including conformance to specification and or performance.
6. Any condition, warranty or other term which might but for this paragraph have effect between ClearSpeed and you or which
would otherwise be implied into or incorporated into the Information (including without limitation, the implied terms of satisfac-
tory quality, merchantability or fitness for purpose), whether by statute, common law or otherwise are hereby excluded.
7. ClearSpeed reserves the right to make changes to the Information or the data contained therein at any time without notice.
© Copyright ClearSpeed Technology plc 2008. All rights reserved.
Advance is a registered trademark of ClearSpeed Technology plc
ClearSpeed, ClearConnect, Advance and the ClearSpeed logo are trade marks or registered trade marks of ClearSpeed
Technology plc. All other brands and names are the property of their respective owners.
ClearSpeed Technology, Inc.
800 West El Camino Real
Suite 180
Mountain View, CA 94040
Tel: +1 650 943 2329
Fax: +1 650 962 1188
ClearSpeed Federal Systems, Inc.
228 Hamilton Avenue, 3rd Floor
Palo Alto, CA 94301
Tel: +1 650 798-5027
Fax: +1 650 798-5001
ClearSpeed
Technology plc
3110 Great Western Court
Hunts Ground Road
Bristol BS34 8HP
United Kingdom
Tel: +44 (0)117 317 2000
Fax: +44 (0)117 317 2002
Email:
info@clearspeed.com
Web:
http://www.clearspeed.com
Support:
http://support.clearspeed.com