PDF User Manual

  1. Home
  2. Manuals
  3. CTT Sport Manual

CTT Sport Manual

Made by: CTT
Type: Manual
Category: Transmitter
Pages: 16
Size: 14.63 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

THE CHAMELEON® 
TACTICAL TRANSMITTER - SPORT

Unique on the market: small, waterproof, sophisticated settings, and 
designed for a hands free experience.

MICHAEL AND BART 
BELLON® ANNOUNCE THE 
CHAMELEON®

 

TACTICAL 

TRANSMITTER - SPORT

CTT®

1

 


background image

Congratulations on your top notch 
transmitter!

The CTT®

 

Sport is specifically designed by 

Michael and Bart Bellon® to fulfil the needs of 
most modern dog trainers who need fine 
tuning, roughness in exterior, toughness, 
practicality and realistic features. The CTT® 
Sport is tuned by Martin System technology. 
The CTT® Sport is specially designed to be 
practical and easy to use. Modern dog training 
is based on timing, minimum motion from the 
handler and discretion towards the 
environment. Due to different ways to affix the 
CTT® Sport to your body and due to the 
discretion of the Finger-Kick: your transmitter 
can be invisible. 

Figure 2

 shows the main components 

of the display: the rotation knob with 
special o-ring for smoother tuning 
(increases, decreases levels of 
stimulation, 0 = clicker, and OFF); the 
LED display (not lighted for tactical 
reasons); the magnetic start point; and 
the Program button that has the 
following functions:
1. an “ON” button
2. A navigating button
3. A pairing button (to the Finger-Kick)
4. A stimulation button in SOS 

2

Chameleon® II 
collar receiver 
with Feather 
contact 
accessories.

Figure 2.

LED 
display

Magnetic start point

Rotation knob

Special o-ring for 

smoother tuning

Figure 1.

Figure 3.

Display 
when 
viewing 
Option “P”

Program 

button

Figure 4.

Composition of the Remote CTT®

The CTT® Sport is fitted with two 
identification codes and is a one dog 
system. There are two programmable 
stimulation options. 

See Figure 1

. A 

Chameleon® collar receiver (

Figure 4

comes by factory settings accepting 4 
identity codes (4 masters). You can pair your 
Chameleon® with a CTT® Sport and up to 3 
more independent transmitters that are 
compatible with the Chameleon®. Each  
CTT® Sport has one identity code with two 
preset options and an Option “P” (

Figure 3

). 

See Page 5 for more information about how 
to use Option “P”. 

 


background image

THE BACKSIDE OF 
THE CTT® SPORT 

1. CONNECTION, FIXATION PLATE (STAINLESS STEEL) 

2. CONNECTION HOLES TO CONNECT WITH SCREWS TO THE BACKSIDE 

OF THE CTT® SPORT 

3. HOLE IN STAINLESS STEEL FIXATION PLATE FOR ATTACHMENT OF 

LANYARD OR STRAP 

4. LED HOLE

3

Holes for fixation of plate via screws:

Metal plate that is under the molded injection 
will affix the CTT® Sport to a strong magnet.

LED will be 

GREEN if 
in loading 

procedure 

on induction 
plate

A wrench and 5 screws 
will be provided.

 


background image

1. Speaker icon (tone 

and vibration as factory 
setting. This can be 
changed with USB Emily*) 

2. Warning tone 
3. Flash, momentary, nick 

mode 

4. Rising Stimulation mode 
5. Continuous stimulation 
6. Stimulation level 
7. Option Dog 1, A 
8. Option Dog 1, B 
9. Option “P” comes from 

factory with setting set on 
Level 18. 

10. Martin System Logo 

*USB Emily is an accessory and 

can be purchased separately. 

USB Emily can customise features 

of Chameleon® II, Chameleon®I, 
and micro collar receiver (Martin

 

System). USB Emily is available on 

bartbellonshop.com or 

shop.martinsystem.com.

CTT® Display Configuration

4

10

Option “P”

 


background image

• Power supply: 3,7V 250 mAh lithium polymer/auto off feature 

• for tactical reasons, no lighted display 

• Range: 400 m (under optimal conditions) with Chameleon® II 2018 (all other Chameleons® and Martin System micro collar receivers will get 200m) 

• Frequency 869,500MHz 

• Maximum Radio Power 5000 MW 

• no external antenna 

• Number of Stimulation Levels: 1-17  

• Click tone at 0 (Factory setting). Can be changed to warning tone with USB Stick Emily which works with Chameleon® receivers and the micro 

from Martin System. 

• Operating temperature: -5°C to +40°C 

• Waterproof (1 meter for one hour) 

• Rechargeable by induction 

• The Chameleon® can accept 4 ID codes and so can be paired to After pressing a Finger-Kick that is paired to option “P”, all stimulation levels of 

collar will be deleted. (Only light, tone, vibrations.) The CTT® Sport is fitted with two identification codes and is a one dog system. There are two 

programmable stimulation options. One identification code is used only to remove stimulation. Note that the Chameleon® can be paired from 

factory setting to both identification codes. The micro collar with 4 masters can also be paired at factory settings to both identification codes. The 

micro collar can be tuned with USB Emily to accept 4 identification  codes. 

5

2,7 cm

Technical specifications of the CTT® Sport 

1. Can control 1 dog.  
2. The CTT® Sport can give you immediate access (via Finger-Kick) to 2 preset programs/levels 

for one dog (if the collar receiver is a Chameleon® II or a micro collar)  

3. You will need USB Emily to install the “Disable Stimulation on Level 18” on your 

Chameleon® or micro collar in order to use “Option P” as a Delete Kick! After using 
“Option P”, you must use Emily again because due to setting install the “Disable 
Stimulation on Level 18” on your Chameleon® or micro collar, a Finger-Kick paired to 
Option “P” will delete all electricity! 

Standby time: CTT® Sport shuts off after 3.5 hours to conserve battery.  
After going 6 times for 3.5 hours on standby or active use,  

5,5cm

9,5cm

Dimensions

 


background image

The Finger-Kick uses the CTT® Sport as a relay for radio transmission so it is 
important that the Finger-Kick is in the remote’s range (i.e. less than 5 meters). 
Once the Finger-Kick is successfully paired with the CTT® Sport, the linking is 
unique and can not disturb another user of similar material.  To pair the Finger-
Kick to the CTT® Sport, please consult page 9 of this manual.

THE FINGER-KICK (BLUETOOTH RING/
STIMULATION BUTTON)

Technical 

Characteristics of the 

Finger-Kick 

Dimensions: 27x30x17 mm 

Weight: 6 grams 

Waterproof 

Battery: CR 1025, 3V 30mAh 

Frequency: 2,4 GHz 

Power < 1mW 

No charging necessary 

6

 


background image

ON/OFF 

Press and immediately release the program button to turn on your CTT® Sport. When the CTT® Sport is on, there is 

information on the display. After you push a paired Finger-Kick one time, the following information will be on the display: 

1. The level of stimulation that is activated by depressing the Finger-Kick 

2. With which electronic program the Finger-Kick is linked  

Reading the Display on the 
CTT®

 

Sport 

Reading the display, the arrow for each possible setting 
goes from Dog 1A, to Dog 1B, to Option “P”. 

The little arrow at left side of display indicates DOG 1. 
The little arrow at right side of display indicates Option “P. 
Program A is when the arrow is at the top of the left (Dog 
1A) and Program B is when the arrow is on the bottom of 
the left. 

SOS 

In the case of emergency — SOS — you can work with the 
program button as your stimulation button. For example, if 
you lose your Finger-Kick or when the battery from the 
Finger-Kick is unexpectedly empty, you can use the 
program button as an SOS button. In SOS mode, the 
display will always refer to Dog 1A at continuous 
stimulation. You can still modify the stimulation level but 
you cannot change the mode in SOS functioning. More on 
how to set the SOS functioning later in the manual. 

Note: When you press the Finger-Kick, the CTT®

 

Sport will 

always refer back to the last setting on that Finger-Kick.

7

• CONTINUOUS STIMULATION

CONTINUOUS STIMULATION WITH 
TONE

WARNING TONE FOLLOWED         
BY STIMULATION WITH TONE

MOMENTARY/FLASH/NICK 
STIMULATION

MOMENTARY/FLASH/NICK 
STIMULATION WITH TONE

•    RISING STIMULATION

 RISING STIMULATION WITH TONE

THE LIST OF MODES THAT ARE 
SHOWN ON YOUR DISPLAY:

 


background image

OFF

To turn OFF your CTT® Sport, 
turn the rotation knob under 0. 
The display will go blank. The 
transmitter is now OFF. You 
cannot turn off the CTT® Sport 
when your transmitter is 
showing Option “P” on the 
display.

CTT

®

HOW TO MANIPULATE THE CTT® SPORT IN SOS MODE

In the case that your CTT® Sport is in SOS functioning (where the program button is your stimulation button):
1. Press and release the program button to switch on the transmitter.
2. The display will now refer to Dog 1, A and the program is reduced to continuous stimulation only at the level you choose with the rotation 

knob.

3. A second press on the program button will inevitably send a continuous stimulation at the preset level to your collar.
4. To turn off the CTT® Sport, just turn the rotation knob under 0. The display will go blank and the transmitter is now OFF. You cannot turn 

off the CTT® Sport when your CTT® Sport is on Option “P”.

5. After three and a half hours, your CTT® Sport will automatically switch off. This count down will start after your last manipulation with the 

transmitter.

Note that due to modern manufacturers obliged standards, if stimulation is activated for more than 10 seconds, the receiver (Chameleon® II, Chameleon®

 

I, 

micro, or TT collar) will shut down automatically for 10 seconds and then will respond again. (More information about the Chameleon® II, micro and TT collar 
can be found on www.bartbellonshop.com.)

8

 


background image

• Be certain that your CTT® Sport is charged (see charging procedures). 

• Make sure that your Finger-Kick is working properly. 

• Make sure that there is no other CTT® Sport, CTT®, PT3000, PT3004, or TT1000 transmitter which is ON within 20 meters from the unit that you want to pair with your Finger-Kick. 

• Decide with with which dog (1 or 2) and with which preset (A or B) you want the Finger-Kick to be paired.  From now on, we will call this choice of dog and preset an “option”. When pairing your Finger-Kick, 

you get the easiest results when your mode on the CTT® Sport is set to rising with tone. Modes and levels are easily adjusted once your Finger-Kick is paired. 

• When you press and release, you will navigate from the last used option and if you continue to press and release, you will scroll through them all. You will see when the options change because they are 

marked with an icon at the left or the right sides of your transmitter. (See page 4 for diagram). 

• For best results, do not cup the small CTT® Sport in your hands when pairing your Finger-Kick. Please hold it by the rotation knob or set it down on a flat surface. 

• Once you have set your choice with which option you want the Finger-Kick to be linked, press and hold the program button for 15 seconds. During this time, the display will navigate two times through all 

possible programs. After this navigation, the display will begin to flash. When the display is flashing, release the program button and there is a 10s window with with to pair your Finger-Kick. To pair the 

Finger-Kick, press for one second and then release the Finger-Kick while the display is flashing and keeps pressing and releasing until the display stops flashing. If pairing is not successful, repeat this 

procedure. If there are still problems, contact the service centre. 

• To double check if the pairing was successful, press and release your program button and the display arrow will now navigate to another option. Now press your Finger-Kick. If the display jumps back to the 

option where you paired the Finger-Kick, you know your Finger-Kick is paired. 

• It is possible to link each option  (Dog 1A, Dog 1B, and option “P”) with a Finger-Kick. After pairing a Finger-Kick to Option “P”, if you push the Finger-Kick linked to that option, you will need USB Emily to 

reinstall your CTT® Sport to factory settings or to your custom settings because pushing a Finger-Kick that is paired to Option “P” will delete the possibility to use stimulation. (Note that you will need USB 

Emily to install the “Disable Stimulation on Level 18” on your Chameleon® or micro collar in order to use “Option P” as a Delete Kick! To reinstall the electricity after using “Option P”, you must use Emily 

because after setting install the “Disable Stimulation on Level 18” on your Chameleon® or micro collar, a Finger-Kick paired to Option “P” will delete all electricity!) 

• It is possible to change the pairing of a Finger-Kick to another option. Note that a Finger-Kick can only be paired to one option at a time. The former option to which the Finger-Kick was paired will 

automatically become un-paired. Anytime a Finger-Kick is re-paired to another option, on the same or on a different transmitter, the Finger-Kick will automatically wipe out past pairings. 

• If a CTT®

 

Sport is in SOS mode, all the Finger-Kicks are automatically unpaired. 

• To pair a finger-kick again to the CTT® Sport if you want to go out of SOS function, press and hold the program button for 15 seconds. The display will not scroll through the options but will stay on continuous 

electricity on the level you did select for 15 seconds.  The display will disappear. Release the program button and press the Finger-Kick or the Program Button again. Automatically the last Finger-Kick setting 

will be re-activated. In reality, you probably need to pair a new Finger-Kick after SOS mode. To do that, see above.

HOW TO LINK (MARRY) A FINGER-KICK WITH 

THE CTT® SPORT

9

 


background image

How to Pair My 

Chameleon® to 

the CTT® Sport

Depressing the Program Button quickly and then 

releasing it lets you choose the options (

see Page 9

you want to program.  Option Dog 1A and option 

Dog 1B are both using the same identification 

code. Option “P” is a second identification code. If 

you pair your Chameleon® with option Dog 1A, it is 

automatically paired with option Dog 1B (and vice 

versa). If you pair your Chameleon® with option 

Dog 2A, it is automatically paired with option Dog 

2B (and vice versa). The Chameleon® can accept 

up to 4 identification codes. On the CTT® Sport, you 

can pair your Chameleon® to both identification 

codes. In this way, you can have up to 2 Finger-

Kicks working as independent and immediate 

preset levels and modes on each CTT® 

Sport and one Finger-Kick paired to Option 

“P”, which is the delete option. 

Magnet Point of 

Chameleon®

10

Magnet Point 

of CTT® Sport

 


background image

Why do we want to unpair the CTT® Sport 

from the Chameleon®? 

If you have four ID codes paired and you pair a fifth 
ID code, the fourth ID code will be knocked out. The only way 
to delete ID code 1, 2, 3 from being paired is to knock them all 
out!  

Unpairing a Chameleon® Collar Receiver from the 

CTT® Sport  

1. Make sure that the CTT® Sport and the collar receiver are 
charged. 

2. To unpair a Chameleon® Collar Receiver from the CTT® 
Sport, one must follow the same steps as when pairing, but 
when the 4 fast blinking LEDS begin to flash, the transmitter 
must be moved at least one meter from the Chameleon® 
Collar Receiver for about three seconds.  

3. Then you bring the magnet on the transmitter back to the 
synchronization point on the receiver until the fast lights stop 
flashing. This erases the pairing. Now you will see that your 
collar receiver immediately goes in standby (1 LED blinks every 
2 to 3 seconds). This collar will not respond to any transmitter. 

If you hold the Chameleon® Collar Receiver and the 
transmitter apart for too long before bringing them back 
together, the transmitter and receiver will not unpair. If the 
Chameleon® Collar Receiver is not unpaired, try again. 
Sometimes it is easier to use the independent magnet from the 
set for unpairing instead of the magnet on the transmitter.  

Once the ID codes are unpaired, the collar needs to be 
paired again with one or more ID codes for subsequent use. 

To program the receiver (Chameleon® or Micro Collar) 

to operate with the CTT® Sport, you need to first turn on 

the CTT® Sport by pressing and releasing the Program 

Button.  

Make sure that the CTT® Sport and the collar receiver 

are charged. 

1. Hold your CTT® Sport with the Magnetic start point (see Figure 

2 on Page 2) to the Magnet Point of the Chameleon® (the 
on/off for the Chameleon®). Let them touch and hold still and 
wait. Wait until the 4 LEDs flash quickly and simultaneously. 
(This is after LEDs light in a repeat of what happens when the 
collar is switched “on”.)  

2. After you see the quickly and simultaneous 4LEDs, you may 

separate the CTT® Sport and the Chameleon® to 
approximately 1 meter distance apart and then press a 
Finger-Kick that is paired to an option on your CTT® Sport. You 
will see that the collar receiver will react. We call the 4 fast 
blinking LEDS “pairing mode”. The pairing mode will last for 
approximately 10 seconds. If you do not pair during pairing 
mode, the collar will go back into standby (1 LED blinks every 
2 to 3 seconds).  

3. Test your pairing by pushing the Finger-Kick and see if the 

Chameleon® LED shows that it is paired. A LED will light on the 
Chameleon® Collar Receiver when a Finger-Kick  paired to 
an option on the CTT® Sport transmitter is depressed after 
there is pairing with the collar to that identification code. 
Other ways to check the pairing are that you can set the 
transmitter to tone for testing purposes, and you can test 
output on yourself (manually) to check if the pairing is 
complete.  

4. If the pairing between the Chameleon®

 

and the CTT® Sport 

was not successful, repeat the procedure.

11

 


background image

THE CHAMELEON® 
TACTICAL TRANSMITTER - SPORT

CHARGING  

12

CTT®

When charging, the CTT® Sport must 

sit on the charging plate like this 

picture shows you:  

•display must be touching the charging plate 

(display can be on or off)  

•the position of the CTT® Sport on the charging 

plate is not symmetrical (see red dotted line) 

•The CTT®

 

Sport must be on the LEFT side of the 

charging plate (where from the backside of the 

CTT®

 

Sport the two screw holes for the fixation 

plate on the right side of the CTT® Sport bisect 

the charging plate) and the bottom of the CTT® 

Sport should be about a centimetre above the 

edge of the plate.

 


background image

Use the provided cable that comes with the charging plate. Connect the induction plate 
to power. (USB end on cable will plug into a USB socket in wall plug.) The induction plate 
must be with the black side up. The white informations and 4 anti-slip pads are on the 
bottom side of the charging plate. Place the CTT® Sport with the display side down onto 
the top side of the charging plate as in the picture above. (As you can see, the CTT® 
Sport is on the left side of the charging plate; it is NOT centralised on the charging plate.) 
The LED on the CTT® Sport will be green if the CTT®

 

Sport is charging. If the CTT®

 

Sport 

does not need charging, no light will be illuminated. Put your CTT® Sport on the 
charging plate in charging position when not in use to have it always perfectly charged.

www.bartbellonshop.com 

Service Center: 

info@martinsystem.com

13

 


background image

How to Re-Install 

Finger-Kick 

Connection 

To pair again a Finger-Kick 
to the CTT® Sport and to 
go out of SOS Function, 
press and hold the 
program button for 15 
seconds. 

The display will disappear. 
Release the program 
button and press on the 
Finger-Kick. The last Finger-
Kick Setting will be 
reactivated automatically. 

If nothing happens, please 
start over the procedure of 
linking a Finger-Kick to the 
CTT® Sport(p.9).

How to Set the CTT®

 

Sport on SOS Mode 

Press and hold the program button for 15 seconds. (The 
display will go twice through setting modes.) When the 
display flashes release the program button, press the 
program button again and release. The display now will show 
Dog 1A in continuous electricity. 

From now on, your program button is the stimulation button. 
(Remember: in SOS mode, the program is set on continuous 
electricity with no tone!) 

When in SOS mode, your Finger-Kicks are automatically 
disconnected from your CTT® Sport. 

This means that no Finger-Kick will or can control your CTT® 
Sport on purpose or by accident. 

In the SOS mode, the 10 second stimulation rule will still apply: 
after pushing the program button for 10 seconds 
continuously, the stimulation will automatically shut off for a 
10 second period. This is a safety rule applied by all quality 
brands.

SOS FUNCTIONING

If we are without a Finger-Kick, we can use our CTT® Sport in SOS 

14

 


background image

Notes: 

My CTT® Sport chip number: 

My Chameleon® chip number:

 


background image