Full Text Searchable PDF User Manual
CnBuyNet.com
1 .To avoid fire or electric shock, keep the Player away
from rain and humidity.
2.Please do not install the player under direct sunlight,
heat source, high temperature, water, high pressure
and violent vibration.
3.Do not block the air outlet of the fan.
4.If your car has been placed under over high or low
temperature, the player should be operated only after
the temperature inside the car returns normal
temperature.
5.The TV programs, movies and other materials may be
under the protection of copyrights. Unauthorized
copying and downloading may result in infringement
of copyrights and intellectual property rights, for
which this company shall not bear any responsibility,
materials are lost due to the damage of the player.
7.This company shall not provide any compensation if
the player is damaged due to artificial causes, for
example, the operation against the User's Manual.
8.For the safety of passengers and yourself, please do
not watch the video programs while driving the car.
Warning
-1-
CnBuyNet.com
Pr
ps .........................................................................3
Connecting with special terminals .........................................4
Special operation(
.....6
......................................................7~8
Operation via equipment
15~18
Operation via touch screen......................................19~24
Main page,
...19
Radio1,Radio2 mode operation intructions ........................ 20
TV,DVD mode operation intructions .................................... 21
Bluetooth mode operation intructions .................................22
AV,USB/SD,ipod mode operation intructions .....................23
Audio and video set mode operation intructions.............24
How to install..........................................................25~28
Specifications..............................................................29
Troubleshooting.....................................................30~31
.......................................................................................5
9~10
alibrate screen/Navigation/
Operating Instructions............................................10~15
(Radio
DVD
TV
USV/SD
AUX)
............................................................................................
ecautions...............................................................................3
Installation ti
Connect
Remote controller
Parameter setup mode operation intructions
Equipment operation................................................
C
USB/SD)
Contents
-2-
Please ignore the contents on remote controller if the functions of remote
controller are not available in the model you use.
Please do not try to reform the player. Otherwise, unexpected accidents may
occur.
If any operation on the Player affects your driving, please stop the car in a
safe place before operating.
Please do not operate this player under extremely high or low temperature.
Before turning on the Player, make sure the temperature inside the car is
between+60 c~-10 c. Temperature over the range may result in abnormal
working.
The fan for the player will be automatically turned on when the surrounding
temperature is over 65 c, if below this temperature, the fan won't act.
Precautions, Installation Tips
Precautions
Installation Tips
This Player is only compatible with negative grounding system with 12V-14V
DC power. Before installation, check whether such a negative grounding
system is set in your car. (Range for voltage protection: 10.8V- 16V)
Before installation, please remove the power from (-) polar of the battery
terminal so as to reduce the chance of damaging the player caused by short
circuit.
Wiring must be done according to the colors indicated on the cables as
specified in the installation guide. Wrong connection may result in player
damage or damage of the car's electric system.
The (-) lead wire of the speaker must be connected to the (-) terminal for the
speaker. Never connect it to the car body nor to other speakers.
Please do not block the ventilation opening or the heat sink to avoid fire
caused by the over heat inside the player.
After the installation and before using the Car Player (including changing the
battery for the car), use a round-head tool (like a ball-point pen) to press the
button 'RESET" on the panel so as to initialize the system.
During installation, if the brake line is not used, it should be grounded.
Otherwise, there will be no video output on the device (no image).
-3-
When installing, please remove sticker on the player housing. Otherwise, it
will affect the heat radiation.
When installing, please remove the protective film on TFT screen to avoid
affecting the operations via touch screen.
CnBuyNet.com
Precautions, Installation Tips And Wiring For Special Terminals
Wiring For Special Terminals
Mute detection terminal
Brake detection terminal
Detection terminal for parking distance control
Antenna controlling terminal
If your car is equipped with a car phone, you should connect the mute detection
terminal to the controlling wire of the car phone. Thus, when you make a call or
answer a call, the Player will automatically enter the mute mode. At the time, a
prompt will be displayed on the LCD screen and TFT screen. If your car is not
equipped with a car phone, you don't need to connect the mute detection
terminal to any controlling wire.
If your car is equipped with a brake controlling wire, you should connect the
brake detection terminal to the brake controlling wire inside the car. Thus, you
can only enjoy music during driving as TFT screen will not display any video
images. In this case, TFT screen will display "WARNING PLEASE DO NOT
WATCH VIDEO PLAYER". If no brake controlling line is installed in your car,
the brake detection terminal should be directly grounded. Thus, you can watch
the video programs no matter when you are driving or the car is stopped.
However, for the sake of safety, please do not watch the video programs during
driving.
If your car is equipped with a parking distance control, you should connect the
detection terminal to that system. Thus, when you back the car, the Player will
enter the park distance control mode so long as it is in on state. At the time,
TFT screen will be automatically stretched out, displaying "BACK LOADING".
Once the parking is completed, TFT screen will return to the original state in 25
seconds. If no parking distance control is installed in your car, you don't need
to connect the detection terminal to any wire.
If the antenna on your car is an automatic extendable antenna, you should
connect the antenna controlling terminal to it. Thus, when you turn on the
power for the Player, the antenna will be automatically extended out; when
you turn off the Player, it will be automatically retracted. If no automatic
retractable antenna is installed in your car, you don't need to connect the
antenna controlling terminal to any wire.
-4-
Amp controlling terminal
If your car is equipped with a car amplifier, you should connect the amp controlling
terminal to the controlling terminal for the amplifier. Thus, when you turn on the
Player, the amplifier will start working for you to enjoy Hi-Fi music. If no amplifier is
installed, you don't need to connect the amp controlling terminal to any wire.
XBS BASS output
MUTE
RADIO ANTENNA
INPUT
RADIO AUTO-ANT 12V+
REAR/L
( )
REAR/L
( )
FRONT/R
( )
FRONT/R
( )
REAR/R
( )
REAR/R
( )
FRONT/L( )
FRONT/L
( )
EXT.CONT 12V+
REAR AUDIO OUT/L
REAR AUDIO OUT/R
FRONT AUDIO OUT/R
FRONT AUDIO OUT/L
orange
orange
white
red
green&black
green
gray&black
gray
purple&black
purple
white &black
white
red
white
blue
brown
BATL(+12V
GND BATL
BRAKE
VIDEO OUT 1
VIDEO OUT 2
BACK
ACC
TV ANT INPUT
FUSE 15A
GND BATL
Black
Black
yello
w
green
red
orange
yellow
yellow
CONNEC`T
-5-
BACK-VIDEO(IN)
AUX-AUDIO/R(IN)
ipod
AUX-VIDEO(IN)
AUX-AUDIO/L(IN)
ipod connection
line (Optional )
yellow
yellow
red
white
CnBuyNet.com
Special operation
1.
Calibrate screen
2.
Navigation
Notice: navigation as an optional,if you buy a unit with out navigation,the
GPS in main manu is useless.
3.USB/SD
-6-
Tips:it must be calibrated if botton on screen in average sensitivity or
fingers not in touch with the valid touch botton.
Steps:the unit is play status under DVD/USB/SD mode, long press
button( about 3 seconds),come to calibration page,use something sharp
but soft material touch the cross in screen center, then touch the 4 corner
as the same.
Steps: If you choose navigation,once start the unit you can touch the
button
direct to navigation mode or press
SRC/POWER
button
on the panel. Press
Back/ Turn off
button to escape navigation mode
or press
RC/POWER
switch to other mode.(More details please read
navigation brochure)
GPS
Under USB/SD mode,users can choose music direct in list; If need touch
button,you should touch right corner to let it works.
NOTE:
The function will be upgraded
renewed continually,extra information
if any differences between practical operation and description in
manual,all depend on the practical operation of this model.Thanks!
REMOTE CONTROLLER
-7-
Title
Sub-T
ENTER
Setup
Angle
Slow
VOL+
SEL
VOL-
ZOOM
MODE
BND
P/N
AMS
RPT
ST
PROG
PBC
OSD
GOTO
Audio
SEEK-
SEEK+
LOC
RDM
9
(1)Power Switch.
Press this button to open the power supplier,
Press it again to close it
.
(2)MUTE button
Press this button to close the volume output.
(3)Title Button
When the machine is the DVD state, press
This button to get back the top menu.
(
4) Source (function change button)
Press this button to change the volume source
output.
(5)OSD (display prompt) Button
When the machine is playing state, press
this button to express the playing time, residual
time, or all disc time, and residual time.
(6)Seek+
Seek-
button
Press this button to search the item by handle.
Can also to choose the upwards item and next
item and fast-forwards/reverse.
(7)VOL+/VOL- (volume control button)
Press this button to adjust the volume loudly
or quiet.
(8)SEL (particularly setting up of Volume
warning) ,Press this button to choose
the mode of particularly setting up of
Volume warning.
(9)BAND(P/N) button,
When the machine is radio state,
press this button to choose the wave
band.When the machine is DVD, VCD
state, press this button to choose the
automatism, PAL or NTSC format.
(10)LOC/RDM (long-district, short range
Play/ random play) Button, When the
Machine is radio state, press this button
To change the long-district, short range
Play. When the machine is DVD, VCD,
CD state, press this button to get the
Random play.
(11)Stop Button
Press this button to stop playing.
(12)
Pause button,Press this button
To change the play or pause.
(13)ST/PROG (stereo and unilateral
Track change/ set the programmer
Play) Button,When the machine is
Phe radio state, press this button to
Change the stereo to unilateral track.
When the machine is play back,
Press this button to set the program
Mer to play with STCP.
(14)(0
10+) Numeral Button,
Decimal, for example 19 item, press
1 and 9 button;
Centesimal, for example 120 item:
press 1, 2 and 0 button.
(15)AMS/RPT (Scan automatically
memory/Repeat Playing Item) Button
When the machine is radio state, press
this button to scan and memory the
broadcasting station.When the
machine is playing back, press this
button to repeat playing.
CnBuyNet.com
REMOTE CONTROLLER
-8-
(16)Zoom Button
Press the button to blowup the picture.
(17)Audio Button
When the machine is DVD play format,
Press this button to open the dialogue.
When the machine is VCD state, press
This button to choose the left/right track
Or stereo.
(18)SUBTITLE Button
When the machine is DVD state,
Press this button to change the
captions language.
(19)Up/down/left/right ENTER Button
When the machine is DVD state,
Press this button to remove to Up/
Down/left/right, and choose the
Option of menu, and then press the
ENTER button to check it.
(20)PBC Button
When the machine id VCD state,
Press this button to open all of item,
And cooperate with the numeral
Button to choose it.
(21)GOTO (set the play time) Button,
When the machine is DVD state,
press this button to set the title/
chapter/time;When the machine
is VCD/CD/MP state, press this
button to set the currently item
and time.
(22)SET UP Button, When the machine
is playing back state, press this
button to change different setting
of item.
(23)SLOW (Slow-forwards/reverse)
When the machine is playing state,
press this button can slow-forwards
/reverse.
Battery:
Instead of Battery:
When the controller doesn t work
or the control district become shortly,
please change new batteries.
Generally, a battery can use for one year.
(But according withyour used frequency)
When the battery becomes weak, the range
of the card remote commander becomes
shorter. Replace the battery with a new
CR2025 lithium battery. Use of any other
battery may present a risk of fire or
explosion.
1
2
+ side up
Notice on the lithium battery.
keep the lithium battery out of the reach
of children. Should the battery by
swallowed, immediately consult a doctor.
Wipe the battery with a dry cloth to
assure a good contact.
Be sure to observe the correct polarity
when installing the battery.
Don t hold the battery with metallic
tweezers, otherwise a short circuit.
Equipment operation
Equipment operation
(1)TFT screen
(2) /LOUD(ON/OF)
(3)Volume/SEL
(4)SRC Power/Mode
-
-9-
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
DOLBY
D I G I T A L
d
o
i p
USB
G P S DMB-TH
DVB-T
Ent
POWER
SRC
7 INCH TOUCH TFT LCD
E
V I D
O
DIVX
BAND
MPEG4
MUTE
MP3/
/
8
(5)Remote controller signal receiver
(6)USB port
(7)
(9)Navigation keys
(10)Panel-remove button
Hang up/Refuse/mute
Answer/FM/AM/switch Picture format
(8)
(11)
(12) +/EQ
Eject
CnBuyNet.com
Descriptions of Controllers & Operating Instructions
(18)Right
(19)NAVI SD card port
(20)SD card port
(21)Reset
(22)Antitheft LED indicator
Operating Instructions
Getting starte
Figure A
1. To use the system, press the key
(as shown in Figure A-(10)), the control
panel will be ejected out. Gently move it rightward to dismantle the antitheft panel. If
a SD card is needed, insert the SD card into SD card port. When the system is
working, if the panel is removed, TFT screen will be automatically retracted, the
power for the whole system is turned off and LED indicator flashes (as shown in
Figure A-(22)). To reset the system, use a sharp-end article to press the key
"RESET" (as shown in Figure A-(21)) to reset the system.
Note: When the system fails, press the key "RESET" to recover normal functions,
but the system will delete the saved functions and time data.
-10-
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
(13) Menu
(14) Up
(15)Down
(16)TFT Screen Open/Close
(17)Left
Operating Instructions
Power on/off and Mode key
2.In standby state (the key to the car at ON position, i.e. ACC/ON, when the small
LCD of the Player displays the current time). Short press SRC POWER key to turn
on the power for the Player, the system enters the working mode, which was saved
when the Player was turned off last time. In the power-on state, short press this key
again to select a desired working mode. If there is a disc inside the Player, the
working mode will be selected from RADIO-DVD-AUX IN-TV- RADIO; if there is no
disc inside the Player, the working mode will be selected from RADIO-AUX IN-TV-
RADIO. In power-on state, long press that key for the Player to return to standby
state (LCD displays the current time).
3.In standby state, insert the disc into the Player, which will absorb the disc and
automatically power on to enter the DVD mode, the volume (when 20 or lower) and
sound effect will be defaulted as the settings which was saved when the Player was
turned off last time.
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
4. If the Player was turned off by turning the car key to OFF (ACC/OFF) position last
time, it will be automatically turned on when the car is started again, and enter the
working state which was saved when the car engine was stopped last time.
-11-
CnBuyNet.com
Operating Instructions
Volume/Bass/Treble/L&R Bal/F&B Bal
5. Turn the Volume button clockwise (as shown in Figure B-(3)) to increase the
volume, and rotate it counter-clockwise to decrease it. Short press this button
repeatedly to select a desired EQ mode in following order: Vol-BAL-FAD-LOUD
ON-EQ OFF (EQ OFF-POP-ROCK-CLAS- EQ OFF)-VOL (volume). Long press the
key to enter image adjusting mode.
Note: a. After selecting a desired mode, you can turn the Volume button clockwise or
counter-clockwise to adjust the status of the mode; b. If you do not adjust the Volume
button five seconds after selecting a mode, the system will return to the current
mode; c. When EQ function and LOUD are turned on, press the Volume button for
TFT screen to display the contents in following order: VOL-L/R BALANCE-F&B Bal
FADER-LOUD ON (OFF)-EQ- VOL
/Mute mode
-12-
Figure B
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
3
8
/Band /NTSC
PAL
SECAM
(
System switch
Note: In Mute mode, turn the Volume button to resume the audio output;
Press this button to finish call or refuse income call under bluetooth mode;
Under other mode it is mute
Press this button to answer or confirm replay under Bluetooth mode FM/AM
switch under Radio mode;picture format switching under DVD/USB/SD mode.
Operating Instructions
Figure C
Replacing disc
Figure D
If there is a disc in the tray, press the key
(as shown in Figure C-(11), the disc
will be automatically ejected out. Insert a disc into the empty disc tray, the disc is
automatically absorbed, the system enters DVD mode.
Adjusting TFT screen angle
-13-
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
11
DOLBY
D I G I T A L
d
o
i p
USB
G P S DMB-TH
DVB-T
Ent
POWER
SRC
7 INCH TOUCH TFT LCD
E
V I D
O
DIVX
BAND
MPEG4
MUTE
MP3/
/
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
After the TFT screen is stretched out, in any mode, press the key "
" (as shown in
Figure D-(15)), the system adjusts the TFT screen angle downwards (as shown in
Figure D-(1)); press the key "
" (as shown in Figure D-(14)), the system adjusts the
TFT screen angle upwards; press "
" (as shown in Figure D-(17)), the system
adjusts the TFT screen angle leftwards, max. adjusting angle shall be 18
; press " "
(as shown in Figure D-(18)), the system adjusts the TFT screen angle rightwards,
with maximal adjusting angle of 18
.
CnBuyNet.com
Operating Instructions
Figure E
Operations on inlet/outlet case of TFT display
In power-on state, press the key "OPEN/CLOSE" (as shown in Figure E-(16)), the
TFT screen is ejected or taken in.
Adjusting TFT screen image mode
Figure F
-14-
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
16
DOLBY
D I G I T A L
d
o
i p
USB
G P S DMB-TH
DVB-T
Ent
POWER
SRC
7 INCH TOUCH TFT LCD
E
V I D
O
DIVX
BAND
MPEG4
MUTE
MP3/
/
In DVD, AUX IN or SD mode, press the key "
" (as shown in Figure F (13)), the
system enters the image adjusting state Operate the keys "
, +" (as shown in
Figure F (2), (12)) to adjust the definition, color, contrast and color saturation for
the image on TFT screen Likewise, long press the Volume button to enter the
image mode adjusting state Short press the Vo ume button to select a desired
image mode Rotate the Volume button to adjust the definition, contrast and color
saturation for the image on TFT screen.
Operating nstructions & Radio Mode
Figure G
Figure H
Sensor
The infrared receiver for remote controller (as shown in Figure G (5))
Radio
1 In Radio mode, repeatedly press the key "Band" (as shown in Figure H (8)) to
select the band in following order: FM1- FM2- Fm3- AM1- Am2- FM1
-15-
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
2
.M
a
nu
al
tun
i
n
g: Pr
e
ss
t
h
e n
aviga
t
i
on
k
e
ys " , " i
nte
rmi
ttent
ly (as sh
o
w
n
i
n
Fig
u
r
e
H-(9));
t
h
e
sys
te
m will s
e
arch
fo
r
t
h
e
cha
nne
ls
u
pwards a
n
d d
o
w
n
wards
.
4
.
Pr
e
ss "
",
t
h
e
sys
te
m plays
t
h
e
pr
o
gram
of
pr
e
vi
ou
s sav
e
d cha
nne
l; pr
e
ss "
",
t
h
e
sys
te
m plays
t
h
e
pr
o
gram
of ne
x
t
sav
e
d cha
nne
l
3
.
A
uto
ma
t
ic
tun
i
n
g: L
on
g pr
e
ss " , " (as sh
o
w
n
i
n
Fig
u
r
e
H-(9)),
t
h
e
sys
te
m will
s
e
arch
fo
r
t
h
e
cha
nne
ls d
o
w
n
wards
o
r
u
pwards
.
.
CnBuyNet.com
Playing DVD discs
Playing DVD discs
1.In DVD mode, short press the SRC/POWER key (as shown in Figure l-(4)) to select
a desired working mode in following order: DVD-AUX IN-TV-RADIO-DVD.
2.When playing DVD, VCD, VD and MP3 discs, short press the "ENT (as shown in
Figure l-(9)). the ongoing playing is paused; press the key again to resume playing;
short press "
" or "
" (as shown in Figure l-(9)), the system plays the previous or
next track in the disc; long press "
" or "
" (as shown in Figure l-(9)), the system
plays the disc in fast forward or fast backward state; press "
"or "
", the system
plays the disc in fast forward or fast backward state.
Figure I
-16-
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
8
Operations on TV & via SD Card
Operations on TV
1 In TV mode, short press the key "SRC POWER" (as shown in Figure J-(4)) to
select a desired mode in following order: TV-RADIO-DVD-AUX IN- TV.
2.If the local TV standard is inconsistent with the Player, short press the key "Band"
(as shown in Figure J-(8)) to select a desired TV standard in following order: PAL
l-PAL DK-PAL BG-PAL I.
3.To search for a new channel, presst"
"or"
" (as shown in Figure J-(17) (18)) to
get a channel upwards or downwards on single basis. Or, long press the central
navigation key "ENT" to have fully automatic search and save the found station. To
watch the previous or next channel, press the navigation key "
" or "
".
Figure J
Operation via SD Card
1.Press the button "
" and remove the panel, insert a SD card into the SD card
port (as shown in Figure K-(20)) and close the panel.
2.To watch the previous or next track, press
. To fast select a desired
program, first press "
" or "
" to select it, and then press "ENT to play it.
After the system is powered
on,press the key "SRC/POWER" (as shown in Figure J-(4)) to enter the SD card
mode and play the contents in it.
"
"or"
"
-17-
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
8
17 18
CnBuyNet.com
AUX IN & Parking Distance Control Operation
Figure K
AUX IN
Parking Distance Control
&
1 Press "SRC/POWER" (as shown in Figure L-(4)) to switch the system into AUX IN
mode. After the TFT screen displays "AUX LOADING", the system enters the
external audio/video input mode. At the time, LCD screen keeps displaying "AUX
IN" In the mode, the external audio/video device can be connected to the Player.
2After the player is connected to the parking distance control, once the car is
reversed, the system automatically enters the PDC state. At the time, LCD screen
displays "CAR-", and the system displays the scene shot behind the car on TFT
screen and the speaker in the car will beep.
Figure L
-18-
POWER
SRC
Ent
E
V I D
O
MUTE
MPEG4
/
MP3
BAND
DIVX
/
OPEN/CLOSE
Touch operation
MAIN MENU
Parameter set mode.
-19-
Radio mode.
TV mode.
DVD mode.
Bluetooth mode
AV mode.
USB/SD card mode.
Ipod mode.
Navigation mode.
Power supply.
Parameter setup mode
GENERAL SETUP
CLOCK SET:
CLOCK SET:
OSD LANG::
RADIO FREQ:
CAMERA:
RDS MODE:
+
+
-
-
00
01
RDS:
M:
H:
08
08
ON
OFF
NORMAL
08
MIRROR
EUROPE
08
USA1
USA2
JAPAN
08
RUSSIA
5
6
Close this window
.
RDS mode adjust
.
Picture choosing of Rearview camera
Radio Systems
Language
Clock adjust
5
6
7
8
9
10
5
6
7
8
9
10
5
6
7
8
9
10
6
7
8
9
10
CnBuyNet.com
Touch operation
RADIO 1 MODE (RDS:ON)
-20-
12
00
Fm1
87.50MHz
87.50
87.50
87.50
87.50
87.50
87.50
5
6
7
8
9
5
6
8
9
5
6
8
9
6
8
9
10
11
12
13
14
15
16
RADIO 2 MODE (RDS:OFF)
12
00
Fm1
87.50MHz
87.50
87.50
87.50
87.50
87.50
87.50
17
18
19
Clock,band,frequency display
Mute on/off.
Power of Screen
Preset:Parameter set mode.
Band
(FM1-FM22-FM3-AM1-AM2-FM1)
11
12
Message display
13
Angle down of screen
14
Station choose and display
15
Angle up of screen
16
Retuen last menu
17
Loud switch
18
19
Stereo on/off
Short press to adjust frequency slightly,
long press to back scan a frequency to stop.
Short press to review the broadcasting
station; long press to search and save
station, press to stope when browsing
or searching.
Short press to adjust frequency slightly
long press to scan another frequency
then stop
Program choosing, press to switch
between traffic message and news
( this function should be used under
AF opened)
Traffic notice station, press to turn on
Or off traffic notice.
Press to open or close AF function,to
save the same program but best
quality frequency once AF opened
Switch between sound effect mode
and close(Rock/Pop/Classic/close
sound effect)
Touch operation
TV MODE
-21-
Message display
Station by Numbe
Scan station forward then stop
can station backward then stop
Choose last station.
Sound effect switch
11
Picture systems switch
12
Angle down adjust of screen
13
Choose last station
14
Mute on/off
15
Choose next station
16
Eject
17
Angle up adjust of screen
18
Back to last menu
Choose next starion
Press to open TV under this mode
Set,press to set menu
1
2
3
4
5
6
7
8
9
10
CH 1 48.25MHz PAL 1
5
6
5
6
5
6
6
7
8
9
8
9
8
9
8
9
10
11
12
13
14
15
16
17
18
Scan on/off
Cross up/down/left/right and OK
Stop
Pause/play
Choose last music
Speed move(twice speed increase)
Set,press to set menu.
11
12
Angle down adjust of screen
13
Eject
Angle up adjust of screen
Back to last menu
Left/right track switch
Choose next music
OK
L/R
SEL
5
5
5
6
6
6
6
7
8
8
8
8 9
9
9
9
10
11
12
13
Speed Back(twice speed decrease)
CnBuyNet.com
Touch operation
-22-
Bluetooth mode
5
6
5
6
5
6
6
7 8
8
8 9
9
9
9
10
11
12
13
14
15
Search and connect Bluetooth device
Choose last music
Answer/Redail/Confirm outcall
Hang up/Refuse
Answer and switch answer
11
Choose next music
12
Angle down adjust of screen
13
No. and symbol
14
15
Message display
Angle up adjust of screen
Back to main menu
Dail international call +
Bluetooth paly/pause when play music
Set,press to set menu
Clear
Touch operation
-23-
AV MODE
USB/SD MODE
USB/SD operation mode the same as DVD mode,more details read page
19
Ipod MODE
5
6
7
8
9
8
9
8
9
8
9
10
11
12
Press to radio mode
Press to DVD mode
Press to TV mode
Back to last menu in iPod
Cross up
Cross down
Speed back
11
Switch between picture and audio
12
Press to picture and audio set menu
Comfirm
Speed move
Play/pause
Notice
you should press
RADIO
or
DVD
TV
to the right mode under
ipod mode then press
back
to main menu
Press any place to
video audio set menu
under AV mode. More details read
page
23
Under USB/SD mode,users can choose music direct in list; If need
touch button,you should touch right corner to let it works.
Notice:
CnBuyNet.com
5
5
5
6
6
6
6
7
8
9
8
9
8
9
8
9
10
11
12
13
14
15
16
High volume+/low volume -
Volume+/volume-
Brightness+/brightness-
Contrast+/contrast-
Tone+/tone-
Woof open/close
Listen left/right
11
EQ(
12
Back to last menu
13
Back Left/back right balance
14
Front left/front right balance
15
Back to main menu
Color+/color-
Picture Reposition to standard
Loud on/off switch
Rock/pop/classic open/close switch
Bourdon+/bourdon-
16
+
Picture 1
Picture 2
+
VIDEO
AUDIO
BRI
+08
CON
+08
COL
+08
HUE
+08
USER
BRIG
SOFT
SHAR
STDY
5
6
5
6
5
6
6
11
13
10
9
8
7
12
15
14
16
17
18
19
20
Audio analog volume panel(picture1
Video analog volume panel
Loud on/off
switch
Woof open/close switch
EQ
Rock/pop/classic/close
switch
Front/back balance analog volume+/-
Left/right balance analog volume+/-
11
Volume +/-
12
Picture mode set by use
13
Brightness mode
14
Soft mode
15
Standard mode
Listen left/right/close switch
Alt analog volume+/-
Woof analog volume +/-
Sharp mode
16
picture2
17
18
19
20
Touch operation
Tips 1:Press
SEL
button under RADIO/TV/Bluetooth; touch any place under
AV mode to
analog volume set
Tips 2: press
SEL
under DVD
IPOD
USB/SD to Audio video analog volume set
Sharp+/-
Color+/-
Contrast +/-
Brightness +/-
-24-
Audio and video set mode
INSTALLATION
List of accessories
INSTALLATION
spring(left)
spring( right)
x4
5x8
Installation Example 1
2
1
Install it into the frame.
Bend the detents outwards if necessary to
tighten them.
-25-
CnBuyNet.com
INSTALLATION
3
4
Install springs on both sides
The front wall of the drivers cabin
Fasten the back screws, install the
rubber and fix the player.
When dismantling the
player, press the springs on
both sides inward, and pull
out the player.
panel
-26-
INSTALLATION
Removing the Control Panel
Please disconnect the power before removing
the control panel and then press
key to eject
the right side of the panel.
Hold the panel, move it rightwards and take it
out.
-27-
Installation Example 2
This example demonstrates an installation on a car
made in Japan. The process of installation shall be
subject to the car types and provided parts
Note:
1 Please keep the accesso
ries out of reach of children.
2.Please use screws
provided for installation.
3.The process of installation
shall be subject to the car
typesand provided parts
Please refer the installations
to professionals.
Accessories
provided
with the car (not with this
player)
Fixing
suport
CnBuyNet.com
INSTALLATION
Install the Control Panel
Note
Align the hole on the left side of the
panel to the buckle on the chassis
and then push leftward to lock the
buckle into the hole of the panel.
Then hold the part as indicated by
arrows in the figure with your
thumb and forefinger and push it
inward until a sound is heard, thus
the panel is locked into place.
Do not touch the connectors on the
player and the control panel,
otherwise poor contact may be
caused. If the connectors are dirty,
please wipe slightly with clean dry
cloth.
Tips:
Please do not remove the control
panel so as to reduce the
opportunities of touching the
connectors.
-28-
TEC NICAL SPECIFICATIONS
H
Power supply....................................12V DC
Load...................................................4
Max. power output ...........................50Wx4
Volume control..................................+10dB(Bass 100Hz, Treble 10KHz)
Overall size .......................................Approx. 192x178x50mm (DxWxH)
Installation dimension .....................Approx. 169x182x53mm (DxWxH)
Weight ...............................................Approx. 2.4Kg
Discs compatible..............................MP4, DIVX, DVD. VCD, MP3. CD, CD-R,
CD-RW, PICTURE-CD
Video standard .................................AUTO/PAL/NTSC/SECAM
Video output level ............................1.0Vp-p 75 OHM
Visual angle ......................................0+/-30
Resolution.........................................480RGB (H) x234(V) pixels
Screen size .......................................7.0" (16:9 Diagonal) inch
Max. output level ..............................2Vrms(+/-3dB)
Frequency response........................20-20KHz
S/N ....
..................................85dB
Stereo crosstalk ...............................80dB
Frequency range ............................522-1620 (Europe/China); 530-1710 (USA)
Intermediate frequency.................450KHz
Sensitivity (-20dB) .........................13dB
Frequency range ............................87.5-108 (Europe/China); 87.5-107.9 (USA)
Intermediate frequency ................10.7MHz
Sensitivity (-30dB) .........................2dB
S/N ...................................................60dB
Overview
AV Play
Audio
FM Tuning
0
AM Tuning
-29-
CnBuyNet.com
TROUBLESHOOTING
Failures
Causes and Solutions
No power supply
Check whether the fuse of the power
supply is burnt. Replace it with a fuse
Of proper capacity if necessary.
Poor LCD display or invalid key
Pressing
No channels received
Check whether the antenna is connected
or connected well or not. If not, connect
the antenna well.
Poor radio reception
The length of the antenna may be set
improperly. Check whether the antenna
is full pulled or broken. If broken,
please replace it with a new one.
Poor broadcasting signal.
The antenna may be poorly grounded.
Check whether the antenna is well
grounded.
No image in backstage
output
The poor connection between the main
Unit and the TV set.
Picture glittering
Press RESET key
-30-
The color system may have been incorrectly
Set. Please set the color system to PALor
NTSC, depending on your TV set.
TROUBLESHOOTING
Note: If the failures can not be solved by the methods
above, please contact the local supplier. No user-
serviceable parts inside.
Parking wire has not yet been
grounded, or though parking wire is
connected with the brake control
cord; there is no TFT image during
travel, which is normal.
The voltage is beyond 10.8V-16.5V.
If the voltage does not fall
into the scope, not only ENT-LEVE
will be displayed on LCD monitor, but
also the player will enter the OFF-
ON-OFF cycle after some time.
WARN:
The power cable or ground wire is too
thin or the voltage is too low. Please
change the storage battery or replace
with a power cable that is thick
enough (above 16AWG).
Possibly the current sound standard
is different from local one. Press the
BAND key to choose an appropriate
sound standard.
In case of too massive
volume output, NT-LEVE
is displayed on LCD
monitor, and the player
enters the OFF-ON-OFF
cycle from time to time.
Mute in the TV mode
ENT-LEVE displayed
on LCD monitor
alternately
No TFT image
Failures
Causes and Solutions
-31-
CnBuyNet.com