Full Text Searchable PDF User Manual
USER MANUAL
MSC
7460
MINI SYSTEM CENTER
Safety Informations
Version 1
cmx® MSC 7460
Seite 2 von 16
Dear customer!
First of all thank you very much, that you have decided for the
cmx® MSC 7460!
Please read all information’s carefully before you start running the
cmx® MSC 7460.
Our company reserves the right to improve the product. That
changes to specifications and design, also without notice.
If you have problems, please visit our website at
www.cmx-electronics.com
and select your device.
Under the point "Support" you find the most frequently asked
questions about your device - if not, please use the contact form.
If you provide variations of your product, please visit our website.
Safety Informations
Version 1
cmx® MSC 7460
Seite 3 von 16
Index of contents
1.
SAFETY
INFORMATIONS
..............................................................................
4
2.
LOCATION
OF
CONTROLS
............................................................................
5
2.1.
F
RONT
SIDE
......................................................................................................
5
2.2.
R
EAR
SIDE
........................................................................................................
6
2.3.
R
EMOTE
CONTROL
.............................................................................................
7
3.
INCLUDED
IN
DELIVERY
...............................................................................
8
4.
CONNECTIONS
............................................................................................
9
4.1.
P
OWER
SUPPLY
.................................................................................................
9
4.2.
S
PEAKERS
.........................................................................................................
9
4.3.
H
EADPHONE
.....................................................................................................
9
5.
CD
PLAYER
................................................................................................
10
5.1.
I
NSERT
AND
REMOVAL
OF
DISCS
..........................................................................
10
5.2.
CD
AND
MP3 CD
OPERATION
...........................................................................
10
5.3.
SKIP+10
&
FOLDERS
ON
MP3 CD
....................................................................
11
5.4.
CD
REPEAT
.....................................................................................................
12
5.5.
DBBS
(B
ASS
B
OOSTER
S
YSTEM
)
.........................................................................
12
5.6.
P
ROGRAMMING
..............................................................................................
12
6.
RADIO
.......................................................................................................
14
7.
SPECIFICATIONS
........................................................................................
15
Safety Informations
Version 1
cmx® MSC 7460
Seite 4 von 16
1. Safety Informations
The lightning flash is a warning
The exclamation point is a
sign alerting you of „dangerous
warning sign alerting you of
voltage“ inside the product.
important instructions
accompanying
the
product.
WARNING
To reduce the risk of electric shock, do not remove cover (or back).
No user-serviceable parts inside. Refer servicing to qualified service
personnel.
To reduce the risk of fire or electric shock, do not expose this
appliance to dripping or splashing liquids.
NOTE
Caution symbols are printed on rear of unit. Please refer to
instruction manual.
CAUTION
Grounding or polarization. The precautions should be taken
so that the wider blade of the AC plug must match the slot in
receptacle “wall socket”.
Invisible laser radiation when open and interlocks defeated.
Avoid exposure to beam.
CLASS 1 LASER PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Location of controls
Version 1
cmx® MSC 7460
Seite 5 von 16
2. Location of controls
2.1. Front side
1. Speakers (left / right)
2. DBBS LED light
3. Volume
knob
4. Function
switch
(OFF / CD (MP3) /
RADIO)
5. Radio band switch (AM/
FM / FM STEREO) &
DBBS OFF/ON switch
6. Radio
tuning
knob
7. FM Stereo LED light
8. CD “PLAY/PAUSE” key
9. CD
“STOP”
key
10. CD “”REPEAT” /
“PROGRAM” key
11. CD “BACK” key
12. CD “NEXT” key
13. “SKIP+10 / FOLDER“
key
14. Display
15. IR sensor
15
6
8 9
1
1
3
4 5
2
7
10 11 12 13 14
Location of controls
Version 1
cmx® MSC 7460
Seite 6 von 16
2.2. Rear side
1. Headphone
socket
2. Speaker output sockets
(left & right)
3. AC-cord & plug
4. FM-antenna
wire
2 2
4
1
3
Location of controls
Version 1
cmx® MSC 7460
Seite 7 von 16
2.3. Remote control
1. „PLAY/PAUSE“
key
2. „NEXT“
key
3. „REPEAT“
/
„PROGRAM“ key
4. „STOP“
key
5. „BACK“
key
6. „SKIP+10 / FOLDER“
key
2
5
1
3
4
6
Included in delivery
Version 1
cmx® MSC 7460
Seite 8 von 16
3. Included in delivery
User’s
manual
Warranty
card
Remote control
Connections
Version 1
cmx® MSC 7460
Seite 9 von 16
4. Connections
4.1. Power supply
This set works on normal household AC-power.
Make sure the set voltage of unit matches your local voltage.
Insert the plug of the AC-cord into a wall outlet with AC-
power.
How to switch the unit “on”
To switch on the set, slide the function switch to “CD” or “RADIO”
as desired.
4.2. Speakers
Unwrap the speaker-cords of both speaker-boxes and insert
the left/right plugs into sockets in the rear of main unit
(see point 2 - location of controls / rear side).
Place the speaker-boxes as far apart as possible for best
sound effect.
4.3. Headphone
To connect the headphones or earphones insert the cable
into socket on the rear of main unit (see point 1 - location of
controls / rear side).
CD player
Version 1
cmx® MSC 7460
Seite 10 von 16
5. CD player
5.1. Insert and removal of discs
When opening the CD-door, always ensure the discs is not
in motion (not spinning) when you open the CD-door.
Always press the “
STOP”
key to stop the disc spinning first.
Place a CD into the compartment with the label-side (printed
side of disc) facing upwards. Press down in the center part
of disc until the disc “locks” onto the center spindle.
When the CD has been placed onto the center spindle,
gently lower the CD-door downwards until it locks shut.
The CD is now ready to be played.
To remove a disc, follow the same procedure as described
above, except to remove the CD instead of inserting it into
the compartment, by placing one finger at the middle of disc
(center spindle) and the other at the edge of the disc and
gentle pulling upwards.
5.2. CD and MP3-CD operation
Insert a CD (or MP3-CD) as described. Set the function
switch to “CD”.
Once the CD door is closed (with a disc inside) the set will
immediately read the disc and the display shows the number
from the song (tracks).
Press
“PLAY/PAUSE”
key and the disk will start spinning
and than playing the first song (track).
At anytime during playback, press
“PLAY/PAUSE”
to stop
the operation of the unit. Press
“PLAY/PAUSE”
to resume
the operation at the same track and position.
CD player
Version 1
cmx® MSC 7460
Seite 11 von 16
At anytime during playback, press
”STOP”
key to stop the
operation of the set. This will reset the set to the first track.
At anytime during playback, “press and release” the
”BACK/NEXT”
keys to skip backwards or forwards by one
track, as desired.
5.3. SKIP+10 & folders on MP3-CD
MP3 files (songs) can be organized into folders when you record
them on to a CD-R disc. You can (for example) organize your
folders on a disc so that each folders contain songs by a particular
artist, or alternatively, by a different genre or type. You can organize
songs & folders in any way you wish so that you can locate & play
back those songs with greater ease & convenience.
If your MP3-CD has no folders, you can use the
“
SKIP+10/FOLDER”
key to jump 10 songs ahead. This is useful if
you have many songs on you want to quickly jump to a particular
song.
Press & release “
SKIP+10/FOLDER”
several times until you
reach a song number near to your desired song, and then
press “
BACK”
or “
NEXT”
repeatedly to arrive and the exact
song you desire.
If your MP3-CD has folders, you can select the folder to playback
by pressing and holding the “
SKIP+10/FOLDER”
button for about 2
seconds.
Each time you press & hold the “
SKIP+10/FOLDER”
key (for
2 seconds), the player jumps to the first song in the next
folder.
The display will alternate between the song number & the
folder number every 5 seconds.
NOTE
The “folder” function only works on MP3-discs which have
folders. If your disc has no folders, pressing
CD player
Version 1
cmx® MSC 7460
Seite 12 von 16
“
SKIP+10/FOLDER”
will perform the “
SKIP+10/FOLDER”
“SKIP+10”
function.
5.4. CD repeat
At anytime during playback, press the
“CD REPEAT”
key
once, than the set will repeat the current track (Repeat
symbol will “flash”).
At anytime during playback, press the
“CD REPEAT”
key
twice, than the set will repeat all tracks (Repeat symbol will
stay “on”.
5.5. DBBS (Bass Booster System)
The built in “Bass Booster” circuit provides a powerful enhancement
to low frequency music, giving a stronger bass sound which is ideal
for “rock” or “jazz” music. This function is only effective for CD-
mode.
5.6. Programming
The CD player can be programmed to play any sequence of up to
21 tracks, as desired.
Always press the ”
STOP”
key before starting the
programming.
Press the “
PROGRAM”
key, the display will show a “P”
symbol and the display will show “po1” to indicate that the
set is now in “memory programming mode”, at memory
position No. 1.
Press the “
BACK”
or “
NEXT”
to select the track (song)
number you wish to be stored in the first memory (program)
position, and press the “
PROGRAM”
key to confirm your
selection.
CD player
Version 1
cmx® MSC 7460
Seite 13 von 16
Repeat the previous 2 Steps, each time selecting any track
number of your choice to be stored in the successive
memory (program) positions.
After each track number, remember to press the
“PROGRAM”
key
.
After a maximum of 21 songs (or less) have been selected
as described above, press the
“PROGRAM”
key
.
Also, the “P” symbol will remain “on” to indicate that you
saved a program-memory (sequence).
Pressing “
PLAY/PAUSE”
key will now play back the “saved
sequence” in the program memory.
Pressing
“NEXT/BACK”
will move to the next or previous
song in the saved sequence.
To clear (cancel) the entire program which is stored in the
memory, simply press “
STOP
”, or switch off the set.
Radio
Version 1
cmx® MSC 7460
Seite 14 von 16
6. Radio
Set the function switch to “radio”.
Set the radio band selector switch to the desired band.
FM radio reception: fully extend the FM antenna wire and
adjust its position
AM (MW) radio reception: rotate or re-position the main unit
Rotate tuning knob to tune-in the desired station, as
displayed in the LCD digital display.
Adjust the volume to desired level.
Specifications
Version 1
cmx® MSC 7460
Seite 15 von 16
7. Specifications
Formats
Audio-CD / CD-R / CD-RW
MP3-CD / MP3-CD-R
Connectors
headphone
left speaker
right speaker
Radio
AM / FM & FM stereo
Frequency
AM
530 - 1600 kHz
FM
87,5 - 108 Mhz
Signal-to-noise ratio
> 90 dB
Speakers
3 inch x 2
maximum 80 Watt PMPO
Power consumption
15 Watt
Power supply
AC 230 V - 50 Hz
The apparatus should not be exposed to dripping or
splashing and no objects filled with liquids should be placed
on the apparatus.
The marking and rating label is located at rear enclosure of
the apparatus.
The mains plug is used as the disconnect device and it shall
remain readily operable. To be completely disconnected the
power input. The mains plug of the apparatus shall be
disconnected from the mains completely. The mains plug
Specifications
Version 1
cmx® MSC 7460
Seite 16 von 16
should not be obstructed or should be easily accessed
during intended use.
Under the influence of electrostatic phenomenon, the
product may malfunction and user to power reset.
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Electrostatic discharge (ESD) Precaution
When electrostatic discharge (ESD) occurs
at the front surface (whether metal or plastic)
or near any part
or any buttons of this unit
there may be a possibility that the product may stop operation
and/or shut down immediately.
This is a normal condition and intended to protect the unit and
internal components against damage.
In such a case, please reset the unit (by disconnecting and
reconnecting AC power source) to revert the unit to normal
operation.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.