Full Text Searchable PDF User Manual
USER MANUAL
CRC
7210
STEREORADIO
Version 2
cmx® CRC 7210
Side 2 from 14
Dear customer!
First of all thank you very much, that you have decided for the
cmx® CRC 7210!
Please read all information’s carefully before you start running the
cmx® CRC 7210.
Our company reserves the right to improve the product. That
changes to specifications and design, also without notice.
If you have problems, please visit our website at
www.cmx-electronics.com
and select your device.
Under the point "Support" you find the most frequently asked
questions about your device - if not, please use the contact form.
If you provide variations of your product, please visit our website.
Version 2
cmx® CRC 7210
Side 3 from 14
Index of contents
1.
SAFETY INFORMATIONS .............................................................................. 4
2.
LOCATION OF CONTROLS ............................................................................ 5
3.
INCLUDED IN DELIVERY ............................................................................... 6
4.
CONNECTORS .............................................................................................. 7
4.1.
P
OWER SUPPLY
................................................................................................. 7
4.2.
B
ATTERY OPERATION
.......................................................................................... 7
4.3.
H
EADPHONE
..................................................................................................... 7
5.
CD-PLAYER .................................................................................................. 8
5.1.
I
NSERT AND REMOVAL OF DISCS
............................................................................ 8
5.2.
CD-
AND
MP3-CD
OPERATION
............................................................................ 8
5.3.
SKIP+10
&
FOLDERS ON
MP3-CD ...................................................................... 9
5.4.
CD
REPEAT
..................................................................................................... 10
5.5.
P
ROGRAMMING
.............................................................................................. 10
6.
RADIO ....................................................................................................... 12
7.
SPECIFICATIONS ........................................................................................ 13
Safety Informations
Version 2
cmx® CRC 7210
Side 4 from 14
1. Safety Informations
The lightning flash is a warning
The exclamation point is a
sign alerting you of „dangerous
warning sign alerting you of
voltage“ inside the product.
important instructions
accompanying
the
product.
WARNING
To reduce the risk of electric shock, do not remove cover (or back).
No user-serviceable parts inside. Refer servicing to qualified service
personnel.
To reduce the risk of fire or electric shock, do not expose this
appliance to dripping or splashing liquids.
NOTE
Caution symbols are printed on lower side of unit. Please refer to
instruction manual.
CAUTION
Grounding or polarization. The precautions should be taken
so that the wider blade of the AC plug must match the slot in
receptacle “wall socket”.
Invisible laser radiation when open and interlocks defeated.
Avoid exposure to beam.
CLASS 1 LASER PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Location of controls
Version 2
cmx® CRC 7210
Side 5 from 14
2. Location of controls
1. CD
door
2. Speakers
(left/right)
3. Display
4. CD
“STOP“
5. CD
“REPEAT/PROGRAM”
6. “SKIP+10/FOLDER”
7. CD
“BACK”
8. CD
“NEXT“
9. CD
“PLAY/PAUSE”
10. Radio tuning control
11. Function switch
(AM / FM / OFF / CD)
12. Volume control
13. Radio dial scale
window
14. Handle
2
4
1
3
5
7
6
8
2
9
10
14
13
12
11
Included in delivery
Version 2
cmx® CRC 7210
Side 6 from 14
3. Included in delivery
User’s
manual
Warranty card
Connectors
Version 2
cmx® CRC 7210
Side 7 from 14
4. Connectors
4.1. Power supply
This set works on normal household AC-power.
Make sure the set voltage of unit matches your local voltage.
Insert the plug oft he AC-cord into a wall outlet with AC-
power.
NOTE
Please make sure to set the function switch to “OFF“ position when
unit is not in use to conserve power.
4.2. Battery operation
Open the battery door and insert 6 pieces “C-cell” (UM-
2/LR14 type) batteries. Please observe correct battery
polarities or the set will not work.
IMPORTANT
When the set is not used or is only used with „AC“, please remove
the batteries, to avoid damage to the set from leakage of batteries.
4.3. Headphone
To connect the headphones or earphones insert the cable
into socket on the rear of main unit.
When the plug of a headphone is inserted into this jack, the
built-in speakers will automatically be disabled. When the
headphone is disconnected, the speakers will be re-
activated.
CD-Player
Version 2
cmx® CRC 7210
Side 8 from 14
5. CD-Player
5.1. Insert and removal of discs
When opening the CD-door, always ensure the disc is not in
motion (not spinning) when you open the CD-door. Always
press the “
STOP”
key to stop the disc spinning first.
Place a CD into the compartment with the label-side (printed
side of disc) facing upwards. Press down in the center part
of disc until the disc “locks” onto the center spindle.
When the CD has been placed onto the center spindle,
gently lower the CD-door downwards until it locks shut.
The CD is now ready to be played.
To remove a disc, follow the same procedure as described
above, except to remove the CD instead of inserting it into
the compartment, by placing one finger at the middle of disc
(center spindle) and the other at the edge of the disc and
gentle pulling upwards.
5.2. CD- and MP3-CD operation
Insert a CD (or MP3-CD) as described. Set the function
switch to “CD”.
Once the CD door is closed (with a disc inside) the set will
immediately read the disc and the display shows the number
from the song (tracks).
Press
“PLAY/PAUSE”
key and the disk will start spinning
and than playing the first song (track).
At anytime during playback, press
“PLAY/PAUSE”
to stop
the operation of the unit. Press
“PLAY/PAUSE”
to resume
the operation at the same track and position.
CD-Player
Version 2
cmx® CRC 7210
Side 9 from 14
At anytime during playback, press
”STOP”
key to stop the
operation of the set. This will reset the set to the first track.
At anytime during playback, “press and release” the
”BACK/NEXT”
keys to skip backwards or forwards by one
track, as desired.
5.3. SKIP+10 & folders on MP3-CD
MP3 files (songs) can be organized into folders when you record
them on to a CD-R disc. You can (for example) organize your
folders on a disc so that each folders contain songs by a particular
artist, or alternatively, by a different genre or type. You can organize
songs & folders in any way you wish so that you can locate & play
back those songs with greater ease and convenience.
If your MP3-CD has no folders, you can use the
“
SKIP+10/FOLDER”
key to jump 10 songs ahead. This is useful if
you have many songs on you want to quickly jump to a particular
song.
Press and release “
SKIP+10/FOLDER”
several times until
you reach a song number near to your desired song, and
then press “
BACK”
or “
NEXT”
repeatedly to arrive and the
exact song you desire.
If your MP3-CD has folders, you can select the folder to playback
by pressing and holding the “
SKIP+10/FOLDER”
button for about 2
seconds.
Each time you press and hold the “
SKIP+10/FOLDER”
key
(for 2 seconds), the player jumps to the first song in the next
folder.
The display will alternate between the song number & the
folder number every 5 seconds.
NOTE
The “folder” function only works on MP3-discs which have
folders. If your disc has no folders, pressing
CD-Player
Version 2
cmx® CRC 7210
Side 10 from 14
“
SKIP+10/FOLDER”
will perform the “
SKIP+10/FOLDER”
“SKIP+10”
function.
5.4. CD repeat
At anytime during playback, press the
“REPEAT/PROGRAM”
key once, than the set will repeat the
current track (Repeat symbol will “flash”).
At anytime during playback, press the
“REPEAT/PROGRAM”
key twice, than the set will repeat all
tracks (Repeat symbol will stay “on”.
5.5. Programming
The CD player can be programmed to play any sequence of up to
20 (CD) or 99 (MP3-CD) tracks, as desired.
Always press the ”
STOP”
key before starting the
programming.
Press the
“REPEAT/PROGRAM”
key, the display will show
a “P” symbol and the display will show “po1” to indicate that
the set is now in “memory programming mode”, at memory
position No. 1.
Press the “
BACK”
or “
NEXT”
to select the track (song)
number you wish to be stored in the first memory (program)
position, and press the
“REPEAT/PROGRAM”
key to
confirm your selection.
Repeat the previous 2 Steps, each time selecting any track
number of your choice to be stored in the successive
memory (program) positions.
After each track number, remember to press the
“REPEAT/PROGRAM”
key
.
CD-Player
Version 2
cmx® CRC 7210
Side 11 from 14
After a maximum of 20 (CD) or 99 (MP3-CD) songs (or less)
have been selected as described above, press the
“REPEAT/PROGRAM”
key
.
Also, the “P” symbol will remain “on” to indicate that you
saved a program-memory (sequence).
Pressing “
PLAY/PAUSE”
key will now play back the “saved
sequence” in the program memory.
Pressing
“NEXT/BACK”
will move to the next or previous
song in the saved sequence.
To clear (cancel) the entire program which is stored in the
memory, simply press “
STOP
”, or switch off the set.
Radio
Version 2
cmx® CRC 7210
Side 12 from 14
6. Radio
Set the function switch to “radio”.
Set the radio band selector switch to the desired band.
FM radio reception: fully extend the FM antenna wire
and adjust its position
AM (MW) radio reception: rotate or re-position the
main unit
Rotate tuning knob to tune-in the desired station, as
displayed in the LCD digital display.
Adjust the volume to desired level.
Specifications
Version 2
cmx® CRC 7210
Side 13 from 14
7. Specifications
Formats
Audio-CD / CD-R / CD-RW /
MP3-CD / MP3-CD-R /
MP3-CD-RW
Connectors
headphone
Radio
AM / FM
Frequency
AM
530 - 1600 kHz
FM
87,5 - 108 Mhz
Speakers
maximum 120 Watt PMPO
Power consumption
15 W
Power supply
AC 230 V - 50/60 Hz
Batteries
6 pieces C/UM-2/LR14 - 9V
The apparatus should not be exposed to dripping or
splashing and no objects filled with liquids should be placed
on the apparatus.
The marking and rating label is located at rear enclosure of
the apparatus.
The mains plug is used as the disconnect device and it shall
remain readily operable. To be completely disconnected the
power input. The mains plug of the apparatus shall be
disconnected from the mains completely. The mains plug
should not be obstructed or should be easily accessed
during intended use.
Under the influence of electrostatic phenomenon, the
product may malfunction and user to power reset.
Specifications
Version 2
cmx® CRC 7210
Side 14 from 14
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Electrostatic discharge (ESD) Precaution
When electrostatic discharge (ESD) occurs
at the front surface (whether metal or plastic)
or near any part
or any buttons of this unit
there may be a possibility that the product may stop operation
and/or shut down immediately.
This is a normal condition and intended to protect the unit and
internal components against damage.
In such a case, please reset the unit (by disconnecting and
reconnecting AC power source) to revert the unit to normal
operation.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.