Full Text Searchable PDF User Manual
Compas magnético integral
QUICK USER’S GUIDE
(Aeronautic Instrumental) is a new navigational equipment, that can
select the True Course (preferably from the gyrocompass and satellite compass) the
automatic pilot and other equipment will be provided with.
corrects real-time the course signal obtained from the magnetic compass,
transforming it into True Course.
allows the user to see and print the deviation table and the deviation
curve of the magnetic compass any moment with an amazing degree of accuracy.
The software used and the touch screen allows an easy and intuitive use.
PLEASE READ CAREFULLY THE INSTALLATION MANUAL BEFORE
INSTALLING THE EQUIPMENT
Registering will provide immediate access to the technical support service and to future
Consult the installation guide included in the CMIcompass box, where you will also find
warnings and important information about the product and its use.
Once purchased, remember to register it at:
Starting the CMIcompass
After installing the equipment following the instructions provided in the enclosed
installation manual, you can start the unit using the switch in the upper right hand
If installation is successfully completed, in a few seconds the “Start” screen will be
displayed, with all the parameters on screen showing zero values, as shown in the
A.1. Settings and data feeding
You can access the information and settings menu pressing the button
menu access tabs are displayed.
INFORMATION AND SETTINGS MENU
You can access the screen for introduction of data by pressing the tab
shown in the image above.
Introduce the vessel information using the touch screen. You can jump to the next field
using the key
or the touch screen. The data introduced will be shown in the
deviation table certificate generated by the CMIcompass.
Pressing the tab
you can access a screen to register the navigational
equipment connected to the CMI. You must select the port COM used with
of the menus “
Pressing the tab
you will access the screen containing the information and the
Once all the data have been introduced, press
to save them. In case of mistake,
you can press
and go back to the starting screen without saving the changes.
A.2. Information display
Pressing the center of the compass the user can access the readings of the different
navigational instruments connected to the CMI.
Satellite compass course
Integral magnetic compass course
A.3. Global Monitoring of all the course sources
To display or hide the information from all the course sources, press the icon . The
data will be displayed in the upper left hand corner of the screen. Do the same to hide
A.4. Display of the real-time magnetic course deviation
Using the pull-down menu on the right of the screen, the user can display or hide real-
Pressing the upper part of the column on the right, the deviations of the magnetic
course or the arithmetic deviations of the magnetic course can be monitored.
Some of the fields of the deviation certificate must be manually filled in.
A.5. Display of the deviation curves
To display or hide the deviation curves, press the icon
To disable this option, press
the icon again.
A.6. Export of the deviation table certificate and deviation curve.
Pressing the icon
the CMIcompass generates / hide the deviation table and curve
Exporting a .pdf file to a folder
Printing from a printer connected to the CMIcompass through a USB port
Setting a local net printer through Ethernet connection
In any case, it will be necessary to have the printer drivers to install it in the
CMIcompass. As the CMIcompass is not equipped with CD/DVD reader, we should
download the drivers to a USB memory or access them through the net. The
s instructions will be followed to install the printer.
NOTE: In case the printer is not connected to the compass in any of the options
above, you can download the stencil of the deviation table and curve in the following
and fill it in with the information on
NOTE: In compasses a support. A USB memory can be connected to the port located
on the back right side.
INTERNATIONAL STANDARD ISO 25862:2009(E)
Ships and marine technology — Marine magnetic compasses, binnacles and azimuth reading
devices. Annex_ G.7 Deviation table or curve
“Each magnetic compass is properly adjusted and its table or curve of residual
deviations shall be available on-board in the vicinity of the display unit of the
compass at all times.”
TABLE AND CURVE DEVIATIONS OF STANDARD COMPASS
Place/port of adjustament: _________________ latitud:____________ longitud:______________
Date/time of adjustment: ___/___/________ day/month/year Local time: ___________________
Weather condition: Sea state: ____________________ Wind force: ________________________
Last adjustment date and place: _______________________________________________________
Port of registry:
Year of building:
COMPASS AND BINACLE DESCRIPTION
Placed on board:
Signed on __ of ______ of 2012.
A.7. Night vision mode
To see the screen in night vision mode, press the icon
To disable this option, press
the icon .
AUTONAUTIC INSTRUMENTAL S.L.
08320 El Masnou
t+ 34 93 540 99 49
f+ 34 93 540 99 51