Full Text Searchable PDF User Manual
Instruction Manual of
CERAMIC COOKER HOB
CMC ELECTRIC LTD
1,Mesogis avenue 8280, Pafos
Tel. +357 26222444 - Fax. +357 26933677
Web. www.cmcelectric.com / Em email: email@example.com
The microcomputer ceramic cooker hob directly employs resistance
wire heating, and realizes power regulation with the microcomputer
controlling different heating time and closing time of the resistance wire.
High temperature protection
The temperature sensor mounted on the radiant electric the temperature
inside the cooker from time to time. When an excessive temperature is
detected, the cooking plate will be directly disconnected and stop power
Thank you for purchasing the the ceramic cooker hob.
Our product can serve you many years to your satisfaction.
Please read this instructions manual carefully before using and installation.
Keep it in a good place after reading for future reference.
Thank you again for your purchase of the ceramic cooker hob, and wish
you to enjoy the pleasure brought about by it.
The microcomputer ceramic cooker hob can meet different kinds of
cuisine demands because of resistance wire heating, micro-
computerized control and multi-power selection, really the optimal choice
for modern families.
The ceramic cooker hob centers on customers and adopts personalized
design. The hob has safe and reliable performances, making your life
comfortable and enabling to fully enjoy the pleasure from life.
Residual heat indicators
After using the hob, waste heat remains in the heating area. The
power nixie tube shows the code “H”, warning to be away from the
Auto shut down protection
During the hob working, it is shut off automatically when the default
timing reach by the program if without operating. If several heating
zones work simultaneously, the hob will be automatically shut off when
anyone heating area reaches it’s default timer. The default working
timer for various power levels are shown in the table below:
Selection of installation equipment
Drill holes on the table surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall
be preserved around the hole.
Be sure the thickness of the table surface is at least 30mm. Please select
heat-resistant table material to avoid larger deformation caused by the heat
radiation from the hotplate.
As shown in Figure (1)
Power level 1 2 3 4 5 6 7 8 9
10 8 7 6 5 4 3 2 1
Note: The safety distance between the
and the cupboard
above the hotplate should be at least 760mm.
mini 5 cm
mini 2 cm
Under any circumstances, make sure the ceramic cooker hob is well
ventilated and the air inlet and outlet are not blocked.
Ensure the ceramic cooker hob is in good work state. As shown in
Fix the hob on the table by screw four brackets on the bottom of hob
(see picture) after installation. Adjust the bracket position to suit for
different table top thickness.
mini 5 mm
The ceramic cooker hob must be installed by qualified personnel
or technicians. We have professionals at your service. Please
never conduct the operation by yourself.
The ceramic cooker hob shall not be mounted to cooling equipment,
dishwashers and rotary dryers.
The ceramic cooker hob shall be installed such that better heat radiation
can be ensured to enhance its reliability.
The wall and induced heating zone above the table surface shall
To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
A steam cleaner is not to be used.
A board is must to be installed underneath the hob.
If the cable is damaged or to be replaced, the operation must be
carried out the by after-sale agent with dedicated tools to avoid
any accidents.If the appliance is being connected directly to the
mains an omnipolar circuit-breaker must be installed with a
minimum opening of 3mm between contacts. The nstaller must
ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised
Power line connection
The socket shall be connected according to the relevant standard
connet to the main power supply
connet to the main power supply
or connected to a single-pole cut-out. 30 minimum supply.
The method of connection is shown in Figure (3):
The ceramic cooker hob appearance
Schematic diagram of the control panel
Instructions for Use
Preparation before using
After power on, a signal will sound, the four power indicator display tors light
up for 1 second then go out, indicating the ceramic cooker hob enters into
Put the pot in the center of the heating zone.
Power regulating key
Childproof lock key
Note: 1. In standby working mode, touch the “ON/OFF” symbol
the heating zone will restore to the standby working
mode if there is no heat setting within 2 minutes.
2. Every heating zone is independent each other.
Double zone function: If you want to use bigger heating
zone, please touch the heating zone selection symbol
when the hob is in working mode. You can select the
size of the heating zone according to the size of the pot.
To ensure the safety of children, the
hob is provided with the function of childproof lock.
Activating the childproof lock:
When the lock is
deactivated, touch the “childproof lock” symbol to activate
the childproof lock. However when in the locked position,
the "stop" touch control has priority and cuts off the
power to the hob. And the other buttons are disabled
except the “stop” touch control button and the “Lock”
Deactivating the childproof lock: When the hob in the
locking mode, you can deactivate the childproof lock
by holding the “childproof lock” symbol.
The power of each heating zone are shown as follow:
Touch the “ON/OFF” symbol for the corresponding heating
zone where there is a pot on it, and the corresponding
indicator displays “-". Then you can set the heat setting
by touching the “+” or “-“ symbol.
Note: 1. This function is available only in the left front heating zone.
2. You can select the function from level 1 to level 9.
3. When the heating zone is in double loop working mode,
the double loop indicator.
Never wash the induction
cooker with water directly to
Keep electrical appliance out
of reach from children or
inform person. Do not let them
use the appliances without
Safety Reminding and Maintenance
After being used for a long
time, the corresponding
heating zone of the ceramic
cooker hob is till hot. Never
touch the ceramic surface to
Never have the cooker to
work without food inside,
otherwise its operational
p e r f o r m a n c e m a y b e
affected and danger may
If the supply cord is damaged
, it must be replaced by the
manufacturer, its service agent
or similarly qualified persons
in order to avoid a hazard.
Never have the ceramic
cooker hob to work without
food inside, otherwise its
operational performance may
be affected and danger may
A dedicated power protection
air swith protection air switch
must be incorporated in the
fixed wiring in accordance
with the wiring rules.
Never use the ceramic cooker
hob in high temperature
environments such as near a
gas stove or kerosene stove.
For sealed foods such as
canned goods, please do not
heat them before opening their
covers so as to avoid any
dangers of explosion due to
If the surface is cracked, swith
off the appliance to avoid the
possibility of electric shock.
Do not place rough or uneven
a p p l i a n c e s , w h i c h m a y
damage the ceramic surface.
Do not put any detergents or
flammable materials in the
equipment installed under the
ceramic cooker hob.
DISPOSAL: Do not dispose this
product as unsorted municipal
waste. Collection of such waste
separately for special treatment
Clean the ceramic cooker hob
on a regular basis to prevent
foreign matters from entering
the fan thus influencing the
Clean with hot water and
Clean with hot water and
sponge for ceramic
Rings and lime
Apply white vinegar to the
polluted zone, then wipe it
dry with soft cloth or a
special article available in
Use a scraper suitable for
ceramic glass (to protect
glass, a silicon product is
preferred) to remove
Special adhesive for
Special adhesive for
Cleanness and Maintenance
You can easily clean the surface of the ceramic cooker hob if
following the methods given in the table.
Hint: please disconnect power before the cleaning.
Type of contam-
Method of cleaning
Articles used for
Indoor use only.
All the contents in this material have been subjected to careful check.
For any mistake and omission in printing or misunderstanding of the
contents,the company keeps the right of interpretation.
Addition:any technical improvement will be placed in the revised
manual without notice;for product appearance and color is according
to the actual one
Maintenance Service Warranty
For any failure of the product, please contact the special
maintenance department or the customer service center.
1. There is a year’s guarantee with this the brand ceramic cooker
2. The period of warranty shall start from the date on which the invoice
3. Any one of the following cases is without the warranty:
Damages caused by improper use, storage and maintenance of
Damages caused by unauthorized disassembly and repair in the
maintenance department not designated by the company.
Model of invoice and model of product maintained are not in
conformity or are altered.
Valid invoice can not be presented.
Damages caused by force majeure.
Using the ceramic cooker hob for commercial purposes.
4. For those products beyond the warranty, the customer service center