PDF User Manual

  1. Home
  2. Manuals
  3. Avenview HDM-C6IPX-SET User Manual

Avenview HDM-C6IPX-SET User Manual

Made by: Avenview
Type: User Manual
Category: Extender
Pages: 18
Size: 4.08 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

VIDEO WALLS

 

VIDEO PROCESSORS

VIDEO MATRIX SWITCHES

EXTENDERS

 

SPLITTERS

 

WIRELESS

CABLES & ACCESSORIES

Control Your Video

HDMI LAN Extender up to 1

2

0M 

over Single CAT5/6

 with IR Support

© 201

5

 Avenview Inc. All rights reserved.

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or 

warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications 

and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted 

by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims 

any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.

Model #: HDM-C6IP

X

-SET

 


background image

Military

Residential

Medical

Aviation

Education

Industrial

Corporate

House Of Worship

www.avenview.com

Product Application & Market Sectors

 


background image

www.avenview.com

Page 3

TABLE OF CONTENTS

1.

GETTING STARTED ..........................................................................................................................1

 1.1  IMpORTANT SAfEGuARDS ..............................................................................................................1

 1.2  SAfETy INSTRuCTIONS ..................................................................................................................1

 1.3  REGulATORy NOTICES fEDERAl COMMuNICATIONS COMMISSION (fCC) ........................... 2

 2.

INTRODuCTION ..............................................................................................................................3

 2.1  pACKAGE CONTENTS .....................................................................................................................4

 2.2  BEfORE INSTAllATION ...................................................................................................................4

 2.3  DEvICE DESCRIpTION & lAyOuT ..................................................................................................7

2.3.1 front panel & Rear panel (Transmitter, HDM-C6Ip

X

-S) ..........................................................7

2.3.2 front panel & Rear panel (Receiver, HDM-C6Ip

X

-R) ...............................................................7

 3.

INSTAllATION 

..................................................................................................................................

9

 4.

GENERAl TROuBlESHOOTING .....................................................................................................

9

 5.

SpECIfICATIONS 

...............................................................................................................................

10

 6.  pIN & WIRING STANDARD DEfINITION ....................................................................................

...

..1

1

2.

4 IR CONTROL DECRIPTION

, HDM-C6Ip

X

-

SET

........

...............................................................

8

2.

2

.1 

APPLICATION 

 

DIAGRAM ..............................................

 ..........................................................

5

2.

2

.

2

 

APPLICATION 

 

DIAGRAM...............................................

..........................................................

6

 


background image

www.avenview.com

Page 1

SECTION 1

GETTING STARTED

1.1

  IMpORTANT SAfEGuARDS

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

What the warranty does not cover

 

 Any product, on which the serial number has been defaced, modified or removed.

 

Damage, deterioration or malfunction resulting from:

 

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.

 

Repair or attempted repair by anyone not authorized by us.

 

Any damage of the product due to shipment.

 

Removal or installation of the product.

 

Causes external to the product, such as electric power fluctuation or failure.

 

use of supplies or parts not meeting our specifications.

 

Normal wear and tear.

 

Any other causes which does not relate to a product defect.

 

Removal, installation, and set-up service charges.

1.2

  SAfETy INSTRuCTIONS

The Avenview HDM-C6Ip

X

-SET, HDMI Extender has been tested for conformity to safety regulations and requirements, and has 

been certified for international use. However, like all electronic equipment’s, the HDM-C6Ip

X

-SET should be used with care. 

Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

!

  Do not dismantle the housing or modify the module. 

!

  Dismantling the housing or modifying the module may result in electrical shock or burn.

!

  Refer all servicing to qualified service personnel. 

!

  Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage 

or other hazards

!

  Keep the module away from liquids. 

!

  Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on 

to the housing, unplug the module immediately. 

!

  Have the module checked by a qualified service engineer before using it again.

!

  Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

1. GETTING STARTED

 


background image

www.avenview.com

Page 2

1.3

  REGulATORy NOTICES fEDERAl COMMuNICATIONS COMMISSION (fCC)

This equipment has been tested and found to comply with part 15 of the fCC rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. 

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

Warning symbols

Description

ONly uSE THE pROvIDED pOWER CABlE OR pOWER 

ADApTER SupplIED. DO NOT TAMpER WITH THE 

ElECTRICAl pARTS. THIS MAy RESulT IN ElECTRICAl 

SHOCK OR BuRN. 

DO NOT TAMpER WITH THE uNIT. DOING SO WIll 

vOID THE WARRANTy AND CONTINuED uSE Of THE 

pRODuCT.

THE vIDEO BOARDS ARE vERy SENSITIvE TO STATIC. 

plEASE ENSuRE If RACK MOuNTED OR INSTAllED ON A 
SuRfACE, IT SHOulD BE IN A GROuNDED ENvIROMENT.

 


background image

www.avenview.com

Page 3

2.

INTRODuCTION

HDM-C6Ip

X

-SET, HDMI extender set is 

an upgraded version of Avenview's 

popular

 HDM-C6IP-SET 

designed to 

provide an extra 

distance, extra IR support and 

the main difference it is network friendly - can be added to your exsiting network. Having a few 

years 

experience with HDMI over IP we have engineered 

a newer chipset providing extra 

PPI

 in resolution

 and lower bandwidth

So the 

user can e

xtend 

any

 HD display with the resolutions of 1080p/60Hz up to 3

94

 feet (1

20

 meters) away from your HDMI or DvI-D 

source. Thanks to the use of the TCp/Ip protocol, you can transfer your high-definition video over an

y

 existing TCp/Ip network. See 

below three examples:

A:

  The Tx and Rx units can extend 1

20 

meters over a single CAT5/6 cable connection point to point.

B:

 The Tx can be connected to a Gigabit switch to establish a Ip address therefore sending 1080p video signals to multiple 

Rx connected to the Gigabit switch and the HDMI displays. 

C:

 Multiple Tx’s can be connected to a Managed Gigabit switch with vlAN/IGMp support therefore sending 1080p video 

signals to Rx connected to the Gigabit switch to show different sources on the HDMI displays.

 

Extends HDMI up to 

120m

 over single CAT5E/6

 

Supports HDMI, EDID, Support HDCp

 

Supports resolution HDTv / 1080pp/60Hz, vesa (1920 x 1080)

 

Supporting the point to point transmission function currently which can be expanded to the multi-point to point
transmission function.

 

Requires a managed Gigabit switch with vlAN/IGMp support to have a soultion with multiple sources (Transmitters).
Standard Gigabit switch can only support one transmitter.

 

The managed switch must support port based IEEE 802.1Q vlAN, IGMp, and to allow duplicate Ip addresses across
the vlAN domains.

 

Each vlAN acts as independent HDMI over Ip Channel on the network.

 

Number of Tx and Rx that can be used is dependent on bandwidth of the switch (Recommended Gigabit switch
10/1000).

 

Unm

anaged switches can be cascaded up to 3 l

ayer network

, allowing the farthest display to be located up to 

394

meters away

 

from the source device. Each receiver can be located up to 1

20 

meters away

 from each switch

.

 

uses 

H.264

 technology to process image compression on a fixed bandwidth.

 


background image

www.avenview.com

Page 4

2.1

  pACKAGE CONTENTS

Before you start the installation of HDM-C6Ip

X

-SET, please check the A. STANDARD package contents.

1

HDMI 

IPX 

TRANSMITTER

x 1

2

HDMI 

IPX 

RECEIvER

x 1

5

pOWER ADApTER (5vDC) 

x 2

7

uSER’S MANuAl 

x1

2.2

  BEfORE INSTAllATION

 

put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

 

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.

 

use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.

3

IR EXTENDER 

4

IR BLASTER 

6

Mounting Bracket

x 1

x 1

 


background image

www.avenview.com

Page 5

    2.2.1 

 

APPLICATION DIAGRAM

 


background image

www.avenview.com

Page 6

2.2

.2

 BEfORE INSTAllATION

 


background image

www.avenview.com

Page 7

2.3

  DEvICE DESCRIpTION & lAyOuT

This product is 

SDFNDJHGDVDVHWZKLFKLQFOXGHV

 a Transmitter and a Receiver.

2.3.1 Front Panel & Rear Panel (Transmitter, HDM-C6IP

;

-S)

2

 

CAT5E/6

 OUT

: 

plug in a Cat-5E/6 cable 

to link and send

data (video and audio) to the  Reciever unit or network switch.

 

1

 

+5V DC: 

Connect to 

the 

5v DC power supply

Power LED will light

 BLUE

.

4

 LINK LED: 

When connected to  RX or network switch the 

LED will light 

GREEN.

2.3.2 Front Panel & Rear Panel (Receiver, HDM-C6IP

;

-R)

1

2

3 4

3

 

DATA LED:

 

When data is transmitting from the 

source the led will continuously flash YELLOW. 

5

 

RESET

:

 

To rest the unit  when no link is established

6

 

HDMI IN

:

 

Connect to HDMI source Max 35ft via HDMI Cable

7

 

IR

:

 

Plug the IR Blaster cable for IR signal being recieved. Place IR Blaster within direct site of the device being controlled

2

 

CAT5E/6 OUT: 

Plug in a Cat-5E/6 cable to link and receive

 data (video and audio) 

IURPWKHVHQGHUXQLW

 or network switch. 

1

 

+5V DC:

 Connect to the 5V DC power supply

Power LED will light 

BLUE.

3

 

DATA

 

LED:

 

When data is transmitting from the 

source the led will continuously flash 

YELLOW. 

 

5

 

RESET

:

 

To rest the unit  when no link is established

 

4

 

LINK

 

LED: 

When connected to  RX or network switch the LED 

will light 

GREEN

.

6

 

HDMI 

OUT

:

Connect to HDMI display Max 35ft via HDMI Cable 

7

 

IR

 IN

:

 

Plug the IR Extender cable for IR signal being received. Place IR Extender within direct line of site with the IR Remote.

5

6

7

5

6

7

1

2

3 4

Important

 

 

Pl

ease do not connect the HDM-C6IPX-SET to a POE network switch this will damage 

and

 

the 

units will be come 

non functional. 

 


background image

www.avenview.com

Page

8

2.

4

 

IR CABLE DESCRIPTION

IR Sockets

-- 

IR OUT

 -IR BLASTER: plug in the IR blaster to the HDMC6IPX-S to emit all IR command 

signals received from the IR Extender plugged into the Rx (Monitor Side) to control the devices 
corresponding to the IR signals. Example: Set Top Box or DVD player (

The Source

).

-- 

IR IN

 - IR EXTENDER: plug in the IR Extender into the (RX) Receiver (Monitor Side) to 

receive all IR command signals from the IR remote controls of the corresponding source. 
Example: Set Top Box or DVD player (

IR Remote Control)

.

Important

 

 

IR signals can be affected by very bright fluorescent light and also EMI Interference on the cables 

so be aware of wher you place and postion your IR cables. Please follow these instructions for best results.

 


background image

www.avenview.com

Page

9

3.

INSTAllATION

please ensure all the package contents are all received

 before proceeding

To setup Avenview HDM-C6Ip

X

-SET follow these steps for connecting to a device:

1. Connect your HDMI source (such as a Blu-ray Disc player) to Transmitter (HDM-C6Ip

X

-S).

2. Connect your HDMI display (such as a lCD Tv) to the receiving unit HDM-C6Ip

X

-R.

3. Connect your CAT-5E/6 follow the standards of TIA-568BlAN cable between the transmitting and receiving units.
4. Make sure CAT-5E/6 lAN cable is tightly connected and not loose.
5. plug in 5v DC power cord to the power jack of the transmitting unit HDM-C6Ip

X

-S

6. plug in 5v DC power cord to the power jack of the receiving unit HDM-C6Ip

X

-R.

4.

GENERAl TROuBlESHOOTING

PROBLEM

POSSIBLE SOLUTION

NO IMAGE

•  Check if connection to the source and the display are correct.
•  Ensure that display device supports 480p, 720p and 1080p resolution

SCREEN DEFECTS 
APPEAR

•  Check the DVI and HDMI connection

•  Check both units and make sure the TX and RX are not Reversed
•  Check the source device is powered ON

DATA TRANSMISSION LIGHT 
FLASHING FAST/NO IMAGE

 

• Check Graphics card on PC

/HD Player

. This product supports

up to 1080p

 

(1920x1080) resolution.

NO 

LIGHT ON 

DATA 

TRANSMISSION

 

•  Check Network cable only use TIA-568B Standard
•  Network cable run is out of range

DATA TRANSMISSION LIGHT 
FLASHING SLOW

 


background image

www.avenview.com

Page

10

5.

SpECIfICATIONS

ITEM

DESCRIPTION

UNITS

HDM-C6Ip

X

-S

HDM-C6Ip

X

-R

UNIT DESCRIPTION

HDMI Transmitter

HDMI Receiver

HDMI COMPLIANCE

full HD 

HDCP COMPLIANCE

yes

VIDEO BANDWIDTH

H.264

 technology to process image compressing GIGABIT (10/1000) 

OvER lAN

SUPPORTED RESOLUTIONS

480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 

1080i@50/60Hz, 1080p@50/60Hz

RESOLUTION AND DIS-
TANCE (24-BIT)

Full HD: (1080p)-

120

meter (3

94

feet) (CAT6)

AUDIO SUPPORT

Surround Sound (up to 7.1 Ch) or Stereo Digital Audio

IR PASS-THRU

Supportrs 20~60KHz IR devices

RS-232 SUPPORT

NO

INPUT

1x HDMI 

1x RJ45

,

 

OUTPUT

1x RJ45

,

 

1x HDMI

HDMI CONNECTOR
RJ45 CONNECTOR
POWER ADAPTER
POWER CONSUMPTION
DIMENSION L x W x H
WEIGHT

Type A (19 pin female)

WE/SS 8p8C with 2 lED indicators

2 x DC 5v/1A

3W Max 

(e

ach

)

3.8

” x 

3.7

 

x

0.9

 

0.3 lbs

Environmental
OPERATING TEMPERATURE
STORAGE TEMPERATURE
RELATIVE HUMIDITY

32˚ ~ 1

40

˚F (0˚ to 

6

0˚C)

-4˚ ~ 140˚F (-20˚ ~ 60˚C)

 

20~90% RH (no condensation)

PERFORMANCE GUIDE FOR HDMI OVER CATEGORY CABLE TRANSMISSION

PERFORMANCE RATING

TYPE OF CATEGORY CABLE

WIRING

SHIELDING

CAT5

CAT5E

CAT6

SOLID

uNSHIElDED (uTp)

SHIElDED (STp)













STRANDED

uNSHIElDED (uTp)





SHIElDED (STp)



TERMINATION

plEASE uSE EIA/TIA-568-B TERMINATION (T568B) AT ANy TIME

1x 

IR Out

1x 

IR IN

 


background image

www.avenview.com

Page 1

1

6.

 

pIN & WIRING STANDARD DEfINITION

TYPE A (RECEPTACLE) HDMI

pin 1

TMDS Data2+

pin 11

TMDS Clock Shield

pin 2

TMDS Data2 Shield

pin 12

TMDS Clock–

pin 3

TMDS Data2–

pin 13

CEC

pin 4

TMDS Data1+

pin 14

Reserved (N.C. on device)

pin 5

TMDS Data1 Shield

pin 15

SCl

pin 6

TMDS Data1–

pin 16

SDA

pin 7

TMDS Data0+

pin 17

DDC/CEC Ground

pin 8

TMDS Data0 Shield

pin 18

+5v power

pin 9

TMDS Data0–

pin 19

Hot plug Detect

pin 10

TMDS Clock+

CAT5E/6 WIRING STANDARD

 


background image

www.avenview.com

Page 1

2

Notes

 


background image

www.avenview.com

Page 1

3

Notes

 


background image

www.avenview.com

Page 1

4

www.avenview.com

Avenview Warranty Certificate

AVENVIEW CORP. (“Avenview”)  warrants  Avenview-branded  product(s)  contained in the original packaging  against defects in materials and workmanship when used 

normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period.  Avenview’s 
published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications. 

LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance 
and reliability if the product(s) is determined to have abide by Avenview’s published guidelines.  Cost of Labor applicable to product(s) after Warranty Period.  For labor costs, 
please contact 

support@avenview.com

PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if 
the product(s) is determined to have abide by Avenview’s published guidelines.  Cost of Parts applicable to product(s) after Warranty Period.  For part(s) costs, please contact 

support@avenview.com

To obtain Warranty: (a) 

proof of purchase in the form of a bill of sale or receipted invoice reflecting that the registered product(s) is within warranty period must be presented 

to obtain warranty service; (b) 

 product(s) must be registered at time of purchase.  

Failure to do so will result in applicable parts and labor charges.  Returning product(s) must 

be shipped in Avenview’s original packaging or in packaging pertaining equal degree of protection to Avenview’s.  Both Avenview and purchaser are responsible for freight 
charges and brokerages when shipping the product(s) to the receiver.  

 

NOT COVERED BY THIS WARRANTY 

This warranty does not apply to any non-Avenview branded product(s); non-registered Avenview product(s). This warranty does not apply: (a) to cosmetic damage, including 
but not limited to scratches, dents and broken cords; (b) to damage caused by use with another product; (c) to damage caused by accident, abuse, misuse, liquid contact, fire, 
earthquake or other external cause; (d) to damage caused by operating the Avenview product(s) outside Avenview’s manuals or guidelines; (e) to damage caused by service 

performed by anyone who is not a representative of Avenview or an Avenview authorized personnel; (f) to defects caused by normal wear and tear or otherwise due to the 
normal aging of the Avenview product(s), or (g) if any serial number has been removed or defaced from the Avenview product(s). 

AVENVIEW IS NOT LIABLE 

FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR 

CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR 

ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; 
LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT 
OR CONSEQUENTIAL LOSS OR DAMAGE 

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. 

Some states do not allow the inclusion or limitation of incidental or consequential damages, or allow limitations on duration implements of the Warranty Period; therefore the above limitations or 

exclusions may not be applicable to you.  This warranty gives you specific legal rights, and you may have other rights which vary from state to state. 

275 Woodward Avenue, Kenmore, NY 14217 

1.866.508.0269 

 


background image

TECHNICAl SuppORT

Disclaimer 

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of 

Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this 

documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages 

in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein. 
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design. 

With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but 

not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.

AV Connectivity, Distribution And Beyond...

USA Head Office
Office Avenview 
Corp. 275 Woodward Avenue
Kenmore, Ny 14217 
phone: +1.716.218.4100 ext223
fax: +1.866.387-8764
Email: info@avenview.com

Canada  Sales
Avenview
151 Esna park Drive, unit 11 & 12
Markham, Ontario, l3R 3B1
phone: 1.905.907.0525 
fax: 1.866.387.8764
Email: info@avenview.com

Avenview Europe
Avenview Europe
Demkaweg 11
3555 HW  utrecht
Netherlands
phone: +31 (0)85 2100- 613
Email: info@avenview.eu

Avenview Hong Kong
unit 8, 6/f., Kwai Cheong Centre, 
50 Kwai Cheong Road, 
Kwai Chung, N.T. 
Hong Kong
phone: 852-3575 9585
Email: wenxi@avenview.com