A1 Touch AOD 320 User Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

All In One

USER’S MANUAL

AOD 320 metal case monitor

Contents:

1. Monitor User’s Manual

1.0 Connection to the monitor

1.1

Installation

1.2

Features

1.3 Plug and play function

1.4

Safety

Precaution

1.5

OSD

(On-Screen-Menu

1.6

OSD

1.7

Specifications

1.8 Contents of the retail package

1.9

Troubleshooting

1.10

Drawing

2. Touch options

2.1

Touchoptions related to monitor size

2.2

4-Wire resistive touchscreen

2.3

5-Wire resistive touchscreen

2.4

SAW

touchscreen

2.5

CAP

touchscreen

2.6

touchscreen

ptical-Touch

3. Software
3.1

Touchkit

3.2

ELO

4. Mounting

4.1 Plain
4.2 Brackets
4.3 Panel

mounting

4.4 Wall

mounting

All In One

0. Connection To the Monitor

• Connect the signal(VGA) cable to the VGA port of computer. Tighten the

two thumbscrews by turning clockwise.

• You can adjust the connection for your PC environment.
• Connect

C cord to the monitor..

• AOD

0 is

32" Full HD

LCD monitor and support up to

Hz.

• You can adjust brightness, contrast, horizontal & vertical positions by OSD

menus and use auto adjust function for instant adjustment.

• High-qualified LCD Controller inside
• Compact space saving design and power saving mode
• 100% compatible with Windows PC environment without the installation of

driver CD or software program.

1. Installation

2. Features

3. Plug and Play Function

AOD

0 can be installed and connected automatically to any computer systems without

driver CD or software programs. Monitor will recognize the optimized value of video

mode by DDC(Display Data Channel) method that makes the graphic card of computer

to communicate with the monitor.

AOD

0 supports VESA DDC 1/2B.

4. Safety Precaution

We strongly recommend that you carefully read this User’s Manual before operating
your LCD monitor. FOLLOW INSTRUCTIONS in this manual.
Please read and comprehend all using directives before use this machine.

●

Power

— Use the type of power indicated on the marking label.

●

Adapter

— Only use an adapter designed of the LCD monitor.

●

Plug

— Do not remove any of the prongs of the monitor's three-pronged power plug.
— Disconnect the power plug from the AC outlet if you will not use it for an indefinite

period of time.

●

Power and extension cord

— Use the proper power cord with ground conductor
— Do not overload wall outlets or power cords. Ensure that the total of all units plugged

into the wall outlet does not exceed 7 amperes.

— Do not allow anything to rest on the power cord. Do not locate this product where

persons will walk on the cord.

●

Care and maintenance

— Slots and openings in the cabinet are provided for ventilation. Do not block or cover

these openings.

— Do not push objects of any kind into cabinet slots or openings. The screen surface

is easily scratched.

— Do not use paper towels to clean the display. Avoid touching it with your fingers,

pens, or pencils.

— Turn off the AC adapter and the monitor over long periods when not in use.

All In One

5. OSD (On-Screen-Menu)

menu select down up

power

Button

Function

Status

POWER

Power ON or OFF

ON/OFF

LED

Indicate working status

Green : On
Red : Stand-by
Orange : No signal

Launch OSD Menu or
Add Value

Move to OSD Menu

DOWN

Launch OSD Menu or
Down value

Move to OSD Menu

SELECT

Select OSD Menu

On / Off OSD Menu

6. OSD Menu

OSD Menu

Description

Remarks

Brightness

Adjust the brightness of the screen

Contrast

Adjust the contrast of the screen

H.Position

Adjust the horizontal position of the
screen's image

V.Position

Adjust the vertical position of the
screen's image

Phase

Adjust the focus of the screen's
image

Clock

Adjust the horizontal size of the
screen's image

Auto Adjust

Automatically adjust the Horizontal
position, Vertical position, Horizontal
size, and Phase Window's
background or characters should be
displayed on your Full screen prior
to proceed this function

Color
Temp

User
Reddish
Bluish

Control the temperature of the color

Red

Green

Blue

Auto Color

Adjust the color balance of the
screen

Control the intensity of the color of
the screen’s image
(Usable when Color temperature is
USER mode.)

Only
usable
on
Analog
Mode

Color

Only
usable
on
Analog
Mode

Picture

All In One

7. Specifications

Language

English

French
German
Spanish
Italian
Korean
Japanese

Select one of the seven
language

OSD H.Posi.

Select OSD MENU horizontal
position

OSD V.Posi.

Select OSD MENU vertical
position

OSD Timer

OSD MENU disappear from
over the screen after setting
time

Transparency

Adjust the transparency of the
OSD menu

Language

English
German
French
Spanish
Korean

Select one of the seven
language

Recall

Initialize the current mode & setting value

Analog

Analog signal(RGB)

Digital

DVI digital signal

Audio

Audio ON/OFF select

Volume

Adjust volume level

Input
Select

Misc.

Usable
on all
Mode.

OSD

Black pouwdered cover.
Model:

32 inch XGA TFT LCD Monitor

Type:

32" Color Active Matrix TFT LCD

Resolution (max):

920

1080

(16:9)

FULL HD

Color:

16,7 miljoen

Pixel:

0.170 x 0.510 mm

Brightness:

500 cd/m2

Contrast ratio:

1000:1

Viewing angle:

88°/88°&88°/88°

Respons time

18 ms

Active area:

697,6 (H) x 392,2 (V) mm

VGA input

Analog RGB (D-Sub 15-pins)

Plug and play:

Yes DDC1 /DDC2B

Power:

24 Volts. included adapter

Power consumption:

<140 watt max.

Power consumption stand by:

<10 watt max.

Temperature opration mode:

0 °C - 50 °C

Humidity operation mode:

10% ~ 85% R.H.

Size

785x475x88mm (wxhxd)

Weight

21 Kg

Mounting:

VESA 200x100mm

Users Mode:

OSD Key Menu / Select / Power / Down / Up

Compatibility:

VESA / IBM / MAC

AOD320 VGA

, 32 inch metal case monitor

All In One

8. Contents Of the Retail Package

Monitor

User’s Manual

AC/DC Adaptor

Power Cord

VGA Cable

Audio Cable

(Option)

Touch Driver (Option)

Composite

Cable (Option)

S-video Cable

(Option)

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The monitor does not respond after you turn on the system.

Make sure that the monitor is turned on.
Turn off the power and check the monitor’s power cord, AC adapter,
and signal cable for proper connection.

Appear the “ No Input the Signal"

Check the connecting of the audio cable between the monitor and the computer.

Appear the “ Input Not the Supported"

Input signal are insuperable, reset the video mode.

The appearance is not at the screen center.

Use “AUTO ADJUST”, refer to the Controls section.

The characters on the screen are too dim or too bright

Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
“RGB ADJUSTMENT, refer to the Control section.

1.10. Drawings

All In One

2 Touch Options

Touch-options related to monitor size

Optical

3mm

6mm protected 3mm

6mm

Touch

064

070w

104

121

150

170

190

220W

230

320

420

Aviable

not aviable

On demand

SAW

CAP

4Wire

5wire

Option: 4-Wire-touchscreen

Interface

USB (standard)

RS232 with PS/2

4 wire-touchscreen

sensor

non glare is standard, glare is option

Chemical

resistance

Acetone, ammonia-based glass cleaners, hexane, isopropyl
alcohol, methylene chloride, mineral spirits, turpentine,
methyl ethyl ketone

Contact bounce less

then

10ms

Activation force

less then 40gr

Input modus

Finger, glove hand,pen or stilus

Surface hardness

Meets pencil hardness 3H (per ASTM D3363)

Position accuracy
(linearity)

less then 1,5mm

Resolution

4096x4096 Based on controller resolution

Operating life 1

>3.000.000 (250gr, 2 activations/sec)

Operating life 2 >200.000

(250gr,

4.5mm/sec)

Light transmission

75~85% non glare (standard) and 90% glare (option) (per
ASTM D1003)

4 wire-controller

USB is standard, RS232 with PS/2 of RS232 internal
powered is option

Power requirement +5V

DC(±10%)

Power

consumption

Operating 80mA ~ Max.current 140mA

Interface standard

USB 'plug-and-play' compatible is standard

option

RS232 with PS/2 connector is optie

option RS232

internal

powered

controller. is option

Electrostatic

protection

prEN 61000-4-2, 1995: Meets level 4 (15kV lucht / 8kV
contact discharges)

Touch resolution 4096x4096
Conversion time

~10 ms per coordinate set

Support operating
system

Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista
Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2, Fedora
CoreI &II &III, Yellow Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits

All In One

Option: 5-Wire-touchscreen

2.4

Option: SAW-touchscreen

5 wire-touchscreen

non glare is standard, glare is option

Chemical resistance

Acetone, ammonia-based glass cleaners, hexane,
isopropyl alcohol, methylene chloride, mineral spirits,
turpentine, methyl ethyl ketone

Vibration

Withstand 0.01 inches amplitude, at a fraquency of 5
to 455 Hz, for a period of 15 minutes in each of the
three axes

Contact bounce

less

then

10ms

Electrostatic discharge
protection

withstands 20 discharges of 15kV (pr EN 61000-4-2,
1995)

Activation force

less

then

40gr

Input modus

Finger, glove hand,pen or stilus

Surface hardness

Meets pencil hardness 3H (per ASTM D3363)

Resolution

4096x4096 Based on controller resolution

Position accuracy
(linearity)

less then 1%

Operating life 1

>3.000.000 (250gr, 2 activations/sec)

Operating life 2

>200.000 (250gr, 4.5mm/sec)

Light transmission

75~85% non glare (standaard) en 90% glare (optie)
(per ASTM D1003)

5 wire-controller

USB is standard, RS232 with PS/2 of RS232 internal
powered is option

Power requirement

+5V

DC(±10%)

Power consumption

Operating 80mA ~ Max.current 140mA

Interface standard

USB 'plug-and-play' compatible is standard

option

RS232 with PS/2 connector is option

option

RS232

internal

powered

controller. is option

Electrostatic

protection

prEN 61000-4-2, 1995: Meets level 4 (15kV lucht /
8kV contact discharges)

Touch resolution

4096x4096

Conversion time

~10ms per coordinate set

Support operating
system

SAW-touchscreen standard

3mm glass with beveled edge

tempered option

Break resistance, meets UL-1950, by
6mm heat tempered glass (is option)

protected option

break resistance,dustproof, waterproof
(is option)

Chemical resistance

Acetone,

ammonia-based

glass

cleaners,

isopropyl alcohol, turpentine, methy
alcohol, methyl ethyl ketone, toluene,
gasoline, kerosine, vinegar

Electrostatic discharge protection

pr EN 61000-4-2, 1995: meets level 4
(15 kV air /8kV contact discharges)

Activation force

less then 85gr

Position accuracy

Standard deviation of error is less then
±1%

Life performance

>50.000.000

(finger)

Input modus

Finger or glove hand (rubber, cloth,
leather)

Surface durability

Optical glass surface, Mohs' hardness
rating : 7

Light transmission

90% (per ASTM D1003)

SAW-controller

Supply voltage

+5V

DC(±5%)

Supply current

Min 85mA ~ Max 150mA

Electrostatic protection

prEN 61000-4-2, 1995: Meets level 4
(15kV lucht / 8kV contact discharges)

Interface standard

USB 'plug-and-play' compatible

option

RS232 with PS/2 connector, is opton

option

RS232 internal powered. is option

Touch resolution

4096x4096

Conversion time

~15ms per coordinate set

Reliability

MTBF greater than 300.000 hours

Support operating system

Microsoft

Windows:

95/98/ME/NT4.0/2000/XP/Vista
Mac OS 9.X, 10.X, Mac Intel
Linux: Red Hat 9.0, Mandrake 10.0,
SuSE 9.2, Fedora CoreI &II &III, Yellow
Dog 3.x, Kernel 2.4.X,
Kernel 2.6.X: 32 en 64 bits

All In One

2.6 Option:

touch

screen

2.5

Option: CAP-touchscreen

2.7

Option: Optical-Touch

Touch technology

NextWindow optical imaging

Touch method

Finger, gloved hand, stylus or any pointer

Touch activation force

No pressure required

Glass

Recommended tempered clear glass for maximum clarity

Luminous

transmission

>92% for clear glass

Touch accuracy

± 2mm (for 40" screen) over 90% of the screen

USB reported touch resolution 32767x32767

Responding speed

10ms per coodinate set (max)

Typical 15ms (60 updates per second)

Power supply

1900 model is USB powered

Other models +12VDC, nominal(+11,5V to +12,5V) power adaptor

Calibration

Simple four-point calibration. No drift

Interfaces

USB: 1.1 (full speed), HID-compliant, plug-and-play compatible
Serial: RS232 DB9 straight through cable to PC. 4,800 Baud to 115,200

Baud

Operating systems

Windows XP and Vista, Mac OS, Win 2000, Linux.

Software

No software required for USB-works with Windows native HID mouse driver

NextWindow Serial Runtime software required for serial interface

NextWindow Touch+ software available for additional utilities

Warrenty

1 Year parts and labour

IR-touchscreen

Chemical resistance

Acetone, ammonia-based glass cleaners, isopropyl

alcohol, turpentine, methy alcohol, methyl ethyl ketone,
toluene, gasoline, kerosine, vinegar

Touch activation force

no minimum touch activation is required

Input modus

ever

bigger than

ything

6,5

(W) x 6,5 (H)

Life performance

∞

Supply voltage

+5V

DC(±5%)

Supply current

150mA

Interface standard

RS232 baud rate: 9600, 8 data bits, 1 stop bit, no

parity, full duplex

Electrostatic

prEN 61000-4-2, 1995: meets Level 4 (15kV air / 8kV

discharge protection

contact discharges)

Touchpoint density

Based on controller resolution, up to 4096x4096

Light transmission

Over 90% (per ASTM1003)

Conversion time

less ms

than20

Support operating

Microsoft Windows: 95/98/ME/NT4.0/2000/XP/Vista

system

Linux: Red Hat 9.0, Mandrake 9.1

CAP-touchscreen standard

3mm glass, glare is standard, non glare is option

tempered version (option)

Break resistance, meets UL-1950, by 6mm heat

tempered glass (is option)

Chemical resistance

Water, ammonia, isopropyl-alcohol, and similar
non-abrasive cleaners

do not use chemical solvent,acidic or alkali

solutions

Input method

Finger

Active force

<10 gr

Response time

Max. 200ms

Ball impact

13,0Ø steel bal 9 gr height=30 cm

Surface hardness

Surface hardcoat cannot be scratched using any

stylus with Mohs rating

≤

Linearity

±1,5%

Surface durability

>160.000.000 touches without noticeable

degradation

Light transmission

≥

85% (accordance with ASTM D1003)

Supply voltage

5V DC

Supply current

Min 85mA ~ Max 150mA

Interface standard

USB 'plug-and-play' compatible

option

RS232 with PS/2 connector is option

option

RS232 internal powered controller. is option

Touch resolution

based on controller resolutionb 4096x4096

Support operating system

Microsoft Windows:
95/98/ME/NT4.0/2000/XP/Vista
Macintosh OS9, OSX
Linux: Red Hat 9.0, Mandrake 10.0, SuSE 9.2,
Fedora CoreI &II &III, Yellow Dog 3.x,
Kernel2.4.2+, With GUI, Xfree86 4.3+, Kernel
2,3 and above, Command Line Only, Xfree86 3.3
and 4.2

All In One

3 Software

3.1 Touchkit

3.2 ELO

By adding a jumper to the A-Touch controller, the whole system becomes
ELO-compatible.
The touch registration will be realised by ELO-drivers.
There are several reasons for doing this:

•

You are already using application software with “build-in” ELO-
drivers.

•

You are using clients with pre-installed ELO-drivers.

•

You replace anoriginal ELO-touchscreen with an A1-touchscreen.

Then benefit is; you don’t have to install new software in the above
mentioned situation.

Remark:
If you want to change your driver software from touchkit to ELO, or the
other way around, you have to de-install the old software completely
before installing the new software.

Features for

Touchkit

software

Features

Calibration

Fast full oriental 4 points position

Compensation

Accuracy 25 points linearity compensation.

Draw Test

Position and linearity verification

Extend Feature

1.  Support monitor / display rotation
2.  Support multiple monitor / display
3.  Support QVGA and Half-VGA function
4.  Support edge compensation

Controller Setting

1.  Support multiple controllers
2.  Dynamical add / remove controllers
3.  Change Controller interface without reboot.

Language

Support 10 languages for Windows

Mouse Emulator

1.  Right / Left button emulation
2.  Normal / Click on touch / Click on release mode
3.  Auto right button

Sound Notification

1. Sound Option ( No Sound / Touch Down / Lift Up )
2. Frequency adjustment
3. Duration adjustment

Double Click

1. Configurable double click speed
2. Configurable double click area

OS support

1. Windows 95 / 98 / ME / NT4 / 2000 / XP /

Vista

Windows XP Tablet PC Edition

2. Windows CE 2.12, 3.0,

5.0, 6.0

.NET

3. Linux ( X Window Version: 3, 4

Red Hat 6.0 ~ 9.0

Mandrake 5.0 ~ 9.1 ,

Kernel 2.4.X

Kernel 2.6.X, 32 en 64 bits

)

4. iMac. OSX

, OS9.X, OS10.X, Intel

5. MS-DOS:

Support display resolution:
320x200, 640x200, 640x350, 640x480, 800x600,
1024x768 and 1280x1024

COM port support

1. Support COM 1 ~ COM 256 for Windows and

Linux

2. Support COM 1 ~ COM 8 for DOS

All In One

4 Mounting

4.1

Plain

4.2

Brackets

4.3

Panel mounting

4.4

Wall mounting

4.1 Plain

4.2 Brackets

4.3 Panel-mounting

Metal case monitor + 2x breakets

Metal case monitor + bezel + 2x breakets

Metal case monitor

All In One

4.4 Wall mounting

Metal case monitor + New Star TV Wallmount (FPMA-W100)

Ask a Question ?