Full Text Searchable PDF User Manual
INSTRUCTION MANUAL
BL2400
2400W
BLOWER /
VACUUM / MULCHER
2
CONTENTS
Warranty Power Tools
For full details please visit us at www.909.com
Introduction
3
Environmental protection
3
Description of symbols
3
Specifications
3
Safety instructions
4
Additional safety rules for blower vacs
5
Unpacking
7
Know your product
8
Assembly
9
Operation of the blower vac
10
Tips for using your blower vac
11
Maintenance and storage information
12
Power cord maintenance
12
Important notes when using the
blower/vacuum selector lever
12
Extension cord support
12
3
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear eye protection.
Wear hearing protection.
Wear breathing protection.
Double insulated for
additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Warning.
Read the manual carefully.
Do not use in the rain, or leave outside while it is
raining.
WARNING.
Keep spectators away. Beware of
objects being flung out.
WARNING.
Remove the plug from the wall socket
before carrying out any kind of maintenance.
Specifications
Voltage:
230 – 240 V ~ 50Hz
Input power:
2400W
Speed:
6000 – 14000 min
-1
Maximum Air Speed:
216 km/h
Collection Bag Capacity:
45 Litre
Mulching Ratio:
10:1
Insulation:
Double insulated
Weight
3 kg
Introduction
Your new 909 power tool will more than satisfy
your expectations. It has been manufactured under
stringent 909 Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new 909 Power Tool. Take
special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
4
General safety rules
WARNING.
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres,
such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way.
Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f) To reduce the risk of electric shock, the manufacturer
recommends the use of a residual current device
with a rated residual current of 30mA or less at
all times.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment
of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the power tool
in unexpected situations.
f ) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair
can be caught in moving parts.
5
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection
can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
i) Children should be supervised to ensure that they do
not play with the appliance.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
Additional safety rules for blower vacs
•
Always wear adequate protective clothing when operating
the tool to avoid injuries to face, eyes, hands, feet, head
or hearing. Use safety glasses or a face shield, high
boots or sturdy shoes, long trousers, work gloves, a hard
hat and ear defenders.
•
Do not start the tool when it is upside down or when it is
not in the operating position.
•
Switch the motor off and remove the plug when the tool
is not being used, left unattended, being cleaned, being
moved from one place to another or when the extension
cord is entangled or damaged.
•
Do not operate the tool near people, especially children
or pets. Turn it off if they get too close. Maintain a safe
distance of at least 5m from other people when using
the tool.
•
Never direct the blower tube towards bystanders or pets.
Never blow debris in the direction of bystanders or pets.
The operator is responsible for accidents or hazards
occurring to other people or their property.
•
Do not handle the plug or the tool with wet hands and
do not use the tool in the rain.
•
Use only outdoor rated extension leads that are so
marked. Keep the extension cord away from heat, oil and
sharp edges.
•
Ensure that the extension lead is secured in a manner
that prevents it form disconnecting from the plug whilst
in use.
6
•
Keep all the air intakes and the blower tube free of dust,
lint, hair and other material that may cause a reduction
in air flow.
•
Keep a balanced and stable stance while using the tool.
•
Do not switch on the tool in enclosed or poorly ventilated
spaces or in the presence of inflammable and/or
explosive substances such as liquids, gasses
and powders.
•
Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
tool when you are tired, sick or under the influence of
alcohol or other drugs.
•
Do not operate this appliance with long loose hair or
loose fitting jewellery. Tie long loose hair back and
remove loose fitting jewellery.
•
Do not allow the blower vac to pick up any burning or
smouldering materials like ashes, cigarette butts etc.
•
Do not attempt to pick up breakable objects like glass,
plastics, china etc.
•
Do not use in vacuum operation without the collection
bag fitted.
•
Do not use the blower vac in either the vacuum or the
blow position on gravel surfaces.
•
Only operate the tool during broad daylight or with
adequate artificial light.
•
When the tool is not in use, store it in a dry place and out
of reach of children.
•
After use, disconnect the tool from the power supply
and check for damage. If you have the slightest doubts,
contact an authorised service centre.
•
Only use the tool according to the instructions given in
this manual.
•
Check regularly that the screws are tight.
•
Use only spare parts and accessories recommended by
the manufacturer.
•
Do not try to repair the tool or access internal parts.
Contact authorised service centres only.
WARNING.
We recommend the use of a residual current
device with a residual current rating of 30mA or less.
7
Unpacking
Due to modern mass production techniques, it is unlikely that
your 909 Power Tool is faulty or that a part is missing. If you
find anything wrong, do not operate the tool until the parts
have been replaced or the fault has been rectified. Failure to
do so could result in serious personal injury.
1. Housing
2. Blow/vac tube
3. Collection bag
4. Blow Vac tube Wheels
5. Shoulder Strap
6. ST4.2x50 screws x2
ST4.2x18 screw x1
1
2
3
4
5
6
8
Know your product
1. Shoulder harness.
2. Adjusting speed controller
3. Trigger
4. Power cord
5. Hook for collection bag
6. Selection knob
7. Collection bag
8. Collection bag connector
9. Wheel
10. Upper tube
11. Lower tube
12. Front handle
13 Handle
14 Housing
6
14
7
12
3
13
10
2
9
1
5
4
8
11
9
Assembly
The blower vacuum requires some assembly prior to use
for the first time This includes the fitting of the blow/vac tube
to the housing and the fitting of the collection bag.
Assemble the tube and wheel bracket
1 Insert the lower tube to the
upper tube and screw them
together.
2. Locate one screw
(ST4.2x50) in big screw
hole on upper tube.
Do not overtighten.
3. Push the wheel assembly
onto the lower tube, up to
the stop. Use the screw
provided to clamp onto the tube.
4. Assemble the wheel
bracket: Insert the wheel
bracket from the end
lower tube until it reach
the rib position and cannot
forward again.
5. Locate one screw
(ST4.2x18) in the screw
hole on wheel bracket.
6. Tighten the screw firmly.
Do not overtighten the screw.
Fitting the tube to the head
1. Locate the tubes into the blower head. Push in until
they stop.
2. Using the screw provided (ST4.2x50) fasten the tubes
to the head.
Fitting the collection bag
1. When connecting the
bag to the unit, locate the
longer strap and connect it
to the hook on the tube.
2. Grasp the shorter
connector strap and
connect it to the hook
at the back of the unit
3. Take the square connector
and push over the unit outlet. The two side clips will
locate into the housing.
10
4. Attach the push-on collection bag connector to the outlet
tube of the housing. Push the fitting of the collection bag
directly onto the outlet until it “clicks” into position.
5. Repeat the first step to connect the strap to the second
hook on the underside of the housing.
6. To remove the collection bag, disconnect the attachments
in the reverse order.
7. When removing the fitting on the outlet, first depress the
two buttons on either side of the plastic connector, and
then pull.
Attaching the shoulder harness
1. Connect the latch on the shoulder harness to the strap
hanger in main housing.
2. Adjust the strap to a comfortable position.
Operation of the blower vac
Prior to using the blower vac, ensure you have read and
understood this instruction manual. Ensure you are wearing
suitable clothing and also safety equipment like safety
glasses, ear protection and a mask if necessary.
Ensure the attachments to the blower vac are correctly
fitted and adjusted.
Be aware of other people and animals in the area where
you are to be operating the blower vac.
To turn the blower vac on.
1. Plug the power cord into an approved electrical extension
cord, and turn the extension cord on.
2. Ensuring the blower vac is directed in a safe direction,
depress the trigger switch
and the blower vac will
start.
This unit is fitted with a
variable speed control which
can be operated during use
so that the vacuuming and
blowing strength can be
varied to suit the job at hand.
Hold the blower vac firmly while starting up.
To turn the blower vac off
To turn the blower vac “off”, simply release the trigger
switch.
11
Important:
After you have turned the blower vac off, do not
leave the product unattended or connected to the extension
cord.
To select the blow operation
1. Move the selector lever
towards the back of the
housing. When the blow
operation is selected, air is
drawn up through the large
blow/vac tube and then
expelled at a much higher
velocity in the lower cavity
below the blow/ vac tube.
Ensure when the blow
operation is selected the
blower vac is pointed, directed and used in a safe manner.
Do not direct the air flow from this blower vac directly or
indirectly towards another person.
To select the vacuum
operation
1. Push the selector lever
forward.
When the vacuum operation
is selected, air and debris is
drawn up through the large
vac tube, and forced through
the mulching impellor. The
debris is mulched and then
blown down into the collection
bag.
Important.
Always ensure the collection bag is correctly
attached as per the “Fitting the collection bag” section in
this manual.
Always be aware of what is being drawn up into the blow/
vac tube. This product is only designed for garden debris
like leaves, twigs and garden cuttings.
Important notes when using the blower/vacuum
selector lever:
Do not force the lever. The lever should move with very little
resistance. If the lever is difficult to move, disconnect the
power supply, remove the collection bag and ensure debris,
dirt or mud has not jammed the lever.
When selecting either of the operations, ensure the selector
lever is fully in one position or the other, not half way.
To empty the collection bag
The collection bag is attached to the blower vac in 2 places.
It is not necessary to remove the collection bag from the
blower vac when the bag needs to be emptied.
The rear of the bag is fitted with a full length zip.
Simply open the zip and empty the contents.
Ensure to close the zip prior to operating the blower vac.
Tips for using your blower vac
The following points may assist you in the operation of the
blower vac.
•
Always try and vacuum dry leaves, cuttings or general
garden debris.
•
Wet material is difficult to mulch and also can cause the
blower vac to clog.
•
If the leaves etc. are damp, then use the blower vac in
blow selection to pile the leaves etc. into one area, vac
and mulch the leaves when dry.
•
Avoid using the vac on areas where there are stones,
or other hard objects. These objects will damage the
impellor of the blower vac.
•
It is also advisable not to allow the blower vac to pick up
soil. Soil generally contains moisture and when combined
with other garden debris can clog the blower vac.
•
The blower vac is not a garbage disposal unit. Do not
attempt to mulch any material than general garden
debris.
12
•
For better performance and comfort, it is recommended
the collection bag is emptied when it becomes
approximately half full. This reduces the weight and also
allows the vac operation to perform at its highest level.
Maintenance and storage information
Prior to cleaning or any maintenance, always ensure the
power plug has been removed from the electrical power
supply.
When you have finished using the blower vac, always
check to make sure the product is clean and free of dirt and
debris. This is important around the selector lever flap which
is just inside the round outlet. To check this area, remove
the collection bag and ensure this area inside the outlet
tube is free of debris and dirt.
Operate the selector lever backwards and forwards to
ensure correct operation.
Do not hose or submerge any part of the blower vac.
Do not use solvents to clean the blower vac.
Store the blower vac in a dry place, and out of reach of
children.
Power cord maintenance
If the supply cord needs replacing, the task must be carried
out by the manufacturer, the manufacturer’s agent, or an
authorised service centre in order to avoid a safety hazard
Important notes when using the
blower/vacuum selector lever
Do not force the lever.
The lever should move with very
little resistance. If the lever is difficult to move, disconnect
the power supply, remove the collection bag and ensure
debris, dirt or mud has not jammed the lever.
When selecting either of the operations, ensure the selector
lever is fully in one position or the other, not half way.
Extension cord support
During use of the blower vac, the extension cord will
continually be pulled as you move from one area to another.
An extension cord support has been provided on the
housing of the blower vac to assist in preventing the
electrical connection between the extension cord and
blower vac plug being forced apart.
Note.
The support is for the extension cord, and not the
cable from the blower vac.
1. To fit the extension cord to
the support, make a tight
loop in the extension cord,
approximately 300mm from
the socket on the extension
cord.
2. Fit the loop into the square
recess in the back portion
of the blower vac on the
underside of the housing.
3. Push the loop all the way through the housing by
approximately 25mm.
4. Push each side of the loop downwards so each side of
the loop fits over the hook inside the recess.
5. After, and only after the cable is correctly seated, plug the
blower vac plug into the socket of the extension cable.
13
14
15
16