Full Text Searchable PDF User Manual
INSTRUCTION MANUAL
BL18L
18V
SWEEPER / BLOWER
2
CONTENTS
Warranty Power Tools
For full details please visit us at www.909.com
Warranty
2
Introduction
3
Environmental protection
3
Description of symbols
3
Specifications
3
General safety rules
4
Additional safety rules for blowers
5
Additional safety rules for the charger
6
Additional safety rules related
to the battery pack and battery safety
8
When to charge the battery
9
Unpacking
9
Important information – Product care
9
Know your product
10
Fitting and removing the battery pack
11
Battery charging
11
To obtain the best life for the battery
11
Attaching the blower tube
12
Turning the blower on and off
12
Operation of the blower
12
Tips for using your blower
12
Maintenance and storage information
12
3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
For safe operation read instruction manual.
Conforms to relevant standards
for electromagnetic compatibility.
Specifications
Charger:
230–240V ~ 50 Hz
Nominal battery voltage:
18V
Battery pack:
1 x 18V, 1.4Ah
Charging time:
3–5 hours
No load speed:
13000 min
-1
Blow speed:
180 km/h
Weight:
1.95 kg
Introduction
Your new 909 power tool will more than satisfy
your expectations. It has been manufactured under
stringent 909 Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new 909 Power Tool. Take
special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
4
General safety rules
WARNING.
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres,
such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment
of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the power tool
in unexpected situations.
f ) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection
can reduce dust-related hazards.
5
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
i) Children should be supervised to ensure that they do
not play with the appliance.
5) Battery tool use and care
a) Ensure the switch is in the off position before
inserting battery pack.
Inserting the battery pack into
power tools that have the switch on invites accidents.
b) Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
c) Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
d) When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
e) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the
battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
Additional safety rules for blowers
a. Always wear adequate protective clothing when
operating the tool to avoid injuries to face, eyes,
hands, feet, head or hearing.
Use safety glasses or a
face shield, high boots or sturdy shoes, long trousers,
work gloves, a hard hat and ear defenders.
b. Do not start the tool when it is upside down or
when it is not in the operating position.
6
c. Switch the motor off and remove the battery when
the tool is not being used, left unattended, being
cleaned, being moved from one place to another.
d. Do not operate the tool near people, especially
children or pets.
Turn it off if they get too close.
Maintain a safe distance of at least 5m from other
people when using the tool.
e. Never direct the blower tube towards bystanders
or pets.
Never blow debris in the direction of
bystanders or pets.
f. Do not handle the battery or the tool with wet hands
and do not use the tool in the rain.
g. Keep all the air intakes and the blower tube free of
dust, lint, hair and other material that may cause a
reduction in air flow.
h. Keep a balanced and stable stance while using
the tool.
i. Do not switch on the tool in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids,
gasses and powders.
j. Only operate the tool during broad daylight or with
adequate artificial light.
k. When the tool is not in use, store it in a dry place
and out of reach of children.
l. After use, remove the battery pack and check for
damage.
If you have the slightest doubts, contact an
authorised service centre.
m. Only use the tool according to the instructions
given in this manual.
n. Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other conditions that may affect it’s operation.
A
tube or other part that is damaged should be properly
repaired or replaced by an authorised service agent.
o. Use only spare parts and accessories
recommended by the manufacturer.
p. Do not try to repair the tool or access internal parts.
Contact authorised service centres only.
q. Do not get distracted and always concentrate on
what you are doing.
Use common sense. Never
operate the tool when you are tired, sick or under the
influence of alcohol or other drugs.
r. Keep a balanced and stable stance while using
the tool.
s. Do not operate this appliance with long loose hair
or loose fitting jewellery.
Tie long loose hair back and
remove loose fitting jewellery.
t. Do not use the blower on gravel surfaces.
Additional safety rules for the charger
•
Your 909 tool with Lithium-Ion batteries may only
be charged with the specific designed 909 Lithium
Ion battery charger purchased with the tool.
IT IS
DANGEROUS TO USE ANY OTHER BATTERY
CHARGER TO CHARGE YOUR TOOL.
Do not attempt
to charge the battery pack with any other charger than
the one supplied.
•
If there is a problem with the battery or the tool, take
it to your nearest Authorised Service centre or phone
and speak with an experienced 909 Customer Service
Representative for assistance in rectifying your problem.
•
Before using the charger, read all the instructions, labels
and cautionary markings on the charger and battery pack
as well as the instructions on using the battery pack.
•
Do not use the charger if it has been subjected to a
heavy knock, dropped or otherwise damaged in anyway.
Take the charger to an authorised service centre for a
check or repair.
•
Do not disassemble the charger. Phone and speak with
an experienced 909 Customer Service Representative or
contact a power tool repair centre for assistance. Opening
or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause
electric shock when you use the tool or charger again.
7
Take the charger to a power tool repair centre when
service or repair is required. Incorrect re-assembly may
result in the risk of fire, electric shock or electrocution. To
reduce the risk of electric shock, do not disassemble any
part of the product.
•
DANGER.
If the battery pack is cracked or damaged in
any other way, do not insert it in the charger
•
Do not plug anything other than your 909 tool into the
charger, as other objects may touch dangerous voltage
points or short out parts, which could result in fire or
electric shock.
•
Do not place the tool or charger on an uneven surface,
as a fall may cause serious damage.
•
Never place the tool or charger near or over a heat
source such as a radiator or heater.
•
Do not operate the charger in a cabinet or other
enclosure unless proper ventilation is provided.
•
Use the battery charger indoors only.
WARNING.
Do not allow any liquid to come into contact
with the charger. There is a danger of electric shock. Do not
position the tool or battery charger near water; for example,
near a sink, wash bowl or toilet. Do not spill liquid of any
kind on the tool or charger. Doing so may short out parts,
causing damage to the product and creating the risk of fire
or electric shock.
Take the tool or charger to your nearest Authorised Service
centre or phone and speak with an experienced 909
Customer Service Representative for assistance in these
circumstances:
•
If liquid has been spilled into the tool or charger, or if rain
or water has touched the tool, Battery Pack or charger.
•
If the tool or charger does not operate normally after you
follow the operating instructions.
•
If the tool or charger has been dropped or damaged.
•
If the tool or charger exhibits a distinct degradation in
performance.
•
If the tool or charger is damaged in any way.
•
If the battery pack is not charged within the time frame
as specified in this manual, turn charger off.
•
To reduce the risk of an electric shock, unplug the
charger from the power supply before attempting to
clean it. To clean tool or charger, wipe with a damp cloth.
Use of any other cleaners is not recommended.
•
Do not place any object on to, or allow anything to rest
on the charger.
•
Make sure that the charger cable is positioned where
it will not be stepped on, tripped over or otherwise
subjected to damage or stress. Keep the lead away
from operating machinery.
•
Do not pull on the lead of the charger to disconnect it
from the mains power socket.
•
Do not use an extension cord unless it is absolutely
necessary. The use of an improper extension cord could
cause the risk of fire, electric shock or electrocution.
•
Never attempt to connect two chargers together.
•
Do not charge batteries or use the tool and battery pack
in locations where the temperature may be below 0°C or
exceed 40°C such as alongside sheds or metal structures.
•
The battery can be charged or operated at temperatures
between 0° C and 40° C.
NEVER CHARGE YOUR LITHIUM-ION BATTERY
BELOW OR ABOVE TEMPERATURES RECOMMENDED
OTHERWISE FIRE OR SERIOUS DAMAGE TO THE
BATTERY PACK MAY OCCUR.
The most suitable temperatures to charge the battery pack
are between 20–25° C.
•
If you wish to charge a second battery pack, unplug the
charger from the mains supply and leave it for at least
15 minutes. After this time you can charge a second
battery pack.
8
Additional safety rules related
to the battery pack and battery safety
•
Use only the 909 batteries supplied with the 909 Tool or
909-approved replacements.
•
Do not use the battery to power any device other than
the 909 tool it was sold with.
•
Charge the battery only with the 909 charger supplied
with the tool or 909-approved replacements and
according to the instructions in the 909 Instruction
Manual.
•
Do not charge the battery in a place where static
electricity is generated nor let the battery touch something
that is statically charged.
•
The battery can be stored at temperatures between
– 0° C and 40° C.
NEVER STORE OR LEAVE YOUR LITHIUM-
ION BATTERY IN TEMPERATURES OVER THAT
RECOMMENDED OTHERWISE FIRE MAY OCCUR.
Do NOT store the Lithium Ion battery anywhere that
the temperature can easily reach higher temperatures
than recommended - this includes garden type sheds,
and Vehicles where the inside temperature can climb
to dangerous levels in the direct sunlight and on high
temperature days.
THINK BEFORE LEAVING YOUR
LITHIUM ION BATTERY PACK IN STORAGE.
•
The battery can be charged or operated at temperatures
between 0° C and 40° C.
NEVER CHARGE YOUR LITHIUM-ION BATTERY
BELOW OR ABOVE TEMPERATURES RECOMMENDED
OTHERWISE FIRE OR SERIOUS DAMAGE TO THE
BATTERY PACK MAY OCCUR.
The most suitable temperatures to charge the battery pack
are between 20–25° C.
•
Always allow the battery pack to cool down after
charging, do not place it in a hot environment such as
a metal shed or open trailer left in the sun.
•
Take care where the tool is stored. Do not store in areas
of corrosive fumes, or salt air or similar conditions. Try
and store the tool in the packaging supplied with the tool.
•
Do not dispose of the battery in a fire or put the battery
into a microwave oven, conventional oven, dryer, or high-
pressure container.
Under these conditions, the battery may explode.
•
Never attempt to open the battery pack, puncture the
battery or subject the battery to strong physical shock.
•
If the plastic housing of the battery pack breaks open
or cracks, immediately discontinue its use and do not
recharge it. Ensure the battery pack clip is in good
condition and will not allow the pack to fall free from the
tool. If the clip is damaged or for any reason is not locking
the pack in place Do Not continue to use.
•
Stop using the battery if it exhibits abnormal heat, odour,
colour, deformation, or is in an abnormal condition.
•
If you detect leakage or a foul odour, it is especially
important to keep the battery away from fire. If battery
liquid leaks onto your skin or clothes, wash well with
clean water immediately. If liquid leaking from the
battery gets into your eyes, do not rub your eyes.
Rinse your eyes well (for at least 10 minutes) with clean
water, and consult a doctor immediately. Do not use a
leaking battery.
•
Handle batteries with care to avoid shorting the battery
with conducting materials, such as nails, screws, metal
watch bands, rings, bracelets, and keys. The battery may
overheat and could burn you.
•
After the battery has reached the end of its useful life,
we recommend recycling the materials at your local
municipal council recycling centre. DO NOT attempt to
replace the battery cells in the battery pack, repair or
modify any part of the battery pack assembly.
•
When recycling, make it nonconductive by applying
insulating tape to the terminals located on the battery.
9
When to charge the battery
New batteries are shipped in a low charged condition and
should be fully charged before Use.
Using the 3 – 5 hour charger the battery will be fully
charged in this period of time, or 1 hour using the fast
1 hour charger after the battery pack has been used and
charged a few times.
Unpacking
Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Important information – Product care
This blower uses Lithium Ion Battery Cells. Care
MUST be taken to ensure both the safety and life of the
pack is maintained. Ensure you have read all of the safety
notes in the previous pages before using the blower.
Safety devices and circuitry for this tool are located in
the battery pack of this tool. The battery pack is a vital
component, not just for the power source, but also for
the full safety control for both the charging and also the
tool operation. Treat the battery pack with care and within
the guidelines of this manual. If the pack does become
immersed in water or any fluids, or is subject to a severe
drop etc, or it does not operate within the guidelines of
this manual, immediately STOP using the battery pack
and have it checked.
As mentioned above the battery pack is an integral
component of this tool and it is fitted with thermal safety
devices. Running the blower at close to maximum load, or
continual resetting of the overload will cause the battery
pack to over heat. When a preset cell temperature is
detected, the battery pack will automatically STOP
operating and will not restart until the battery pack has
cooled to a safe level.
In this condition, DO NOT force cool the pack by placing in
a freezer or similar device. Refer to the “
Overload
” section
in this manual.
Another feature of the blower/battery pack is the
low
voltage cut out
feature. This feature operates when the
voltage drops below a pre set value. When this occurs the
tool will automatically stop operating. To correct the situation
you need to either insert another charged battery into the
blower or recharge the existing battery, and then proceed
with the blower application.
Note:
Attempting to restart the tool in this condition without
either recharging the battery or installing a battery with
charge will lead to the blower restarting and then stopping
again after only a few seconds of operation.
These safety devices have been fitted for the safety,
reliability and life of the tool.
Wear goggles
Wear ear muffs
Wear a breathing mask
10
Know your product
1. On/off trigger switch
2. Blower tube
3. Battery
4. Battery release tabs
5. 3–5 Hour Charger
2
5
1
4
3
11
Fitting and removing the battery pack
To remove the battery pack
from the blower firmly press the
battery release tabs (4) at either
side of the battery pack, and slide
the battery backward out of the
tool.
To install the battery pack, align
rails, on the tool with the tabs
on the battery pack and slide the
battery pack on to the blower. Ensure the battery pack is
sitting straight on the foot and correctly entering the runners.
The battery should slide fully on to the drill foot until the
battery pack “clicks” into position.
Battery charging
•
The battery supplied with this
tool is model number 2G18LB.
•
The Charger Pack supplied
with this tool is model number
2G1835LC.
•
The Charger Adaptor supplied
with this tool is model number
2G1835LA.
Note.
Only use the supplied
batteries, charger and adaptor.
IMPORTANT.
Before plugging
in the power supply from the
charger to the slim line adaptor
always ensure that the plug is
switched off at the mains.
IMPORTANT.
The battery will be
fully charged after approximately
3–5 hours, remove it from the adaptor after this time.
Do not leave a battery charging for longer than 24 hours.
1. Align and slide the slim line
adaptor onto the battery
until the battery pack latches
“click” into position. Check
the adaptor is flush with the
battery and there is a firm
connection.
2. Connect the power supply
from the charger (5) to the slim
line adaptor via the socket in
the rear of the adaptor housing.
3. Plug in the charger and switch
on. The red LED indicator will
show power to the adaptor and
that charging is taking place.
4. The battery charging time is
approximately 3 - 5 hours to
charge a low charged battery, but will be shorter if the
battery is already partially charged. The red LED goes
out when the charging cycle is complete. Turn off the
charger power supply from the mains and then remove
the battery from the adaptor.
WARNING.
Only use charger model 2G1835LC with the
adaptor model 2G1835LA) that is supplied for the model
2G18LB battery pack.
To obtain the best life for the battery
For battery storage and when the blower is not being used,
it is advised to charge the battery to approximately half
charge. Leaving the battery in the fully charged condition
can shorten the cell life.
Short charging is acceptable with these cells.
Prevent constant overloading of the blower.
Avoid allowing lose items like screws or nails etc. to be
stored with battery packs as these or similar items can
short battery packs and cause a fire or explosion.
Always unplug the charger when not in use and store in
a dry secure place.
12
Avoid charging, using or storing your battery in
temperatures below 0ºC and above 40ºC.
Attaching the blower tube
CAUTION.
Always ensure that
the tool is switched off and the
battery is removed before making
any adjustments or maintenance
procedures.
Slide the blower tube (2) onto
the blower housing, ensuring the
hole in the tube matches up with
the raised section in the housing.
Turning the blower on and off
1. Ensure the battery pack (3) is
inserted.
2. To switch on squeeze the
trigger switch (1).
3. To switch off, release the
trigger switch.
Operation of the blower
Hold the blower firmly and rotate
from side to side, holding the
tube several inches above the
ground. Slowly move forward
directing the debris to the desired
location.
•
Prior to using the blower,
ensure you have read and
understood this instruction
manual.
•
Ensure you are wearing suitable clothing and also safety
equipment like safety glasses, ear protection and a mask
if necessary.
•
Ensure the attachments to the blower are correctly fitted
and adjusted.
•
Be aware of other people and animals in the area where
you are to be operating the blower.
Tips for using your blower
The following points may assist you in the operation of the
blower.
•
Always try and blow dry leaves, cuttings or general
garden debris, wet material is difficult to move.
•
If the leaves etc. are damp, then use the blower to pile
the leaves etc. into one area for collection.
Maintenance and storage information
Prior to cleaning or any maintenance, always ensure the
battery pack has been removed from the tool.
When you have finished using the blower, always check to
make sure the product is clean and free of dirt and debris.
Do not use solvents to clean the blower.
Store the blower in a dry place, and out of reach of children.
