Full Text Searchable PDF User Manual

Q u i c k
S t a r t
G u i d e
SP250 QSG 00

Bluetooth wireless is a quick and easy way
to connect a smartphone to a speaker or a
headset. There are basically two steps to
making Bluetooth work.
PAIRING:
The
two devices get
to know each
other.
CONNECTING:
The two devices
do something
together (like play
music).
“Hi. i’m a
phone.”
This guide takes you through the steps to get
started.
Getting to know Bluetooth
“Hi
phone.
i’m a
speaker.”

Make sure the following items came in this
package.
Step 1: unpack
Your speaker
uSB
cable

Before you start using the HEX NRG speaker
for the first time, it’s a good idea to charge it
completely.
Speaker
back
Step 2: charge the NrG
To charge the speaker:
Plug the included USB
cable into the
Charge
jack
on the back of the speaker.
Plug the other end of
the USB charging cable
into a power source, like
a computer or a USB
charging adapter.
The charging indicator on the back of the
speaker is red while the speaker is charging.
It turns green when the speaker is fully charged.
Note:
You can use the speaker while it’s charging.

Step 3: turn on
Press the
Power
button
on the front of the
speaker. The power up
tone sounds and the
indicator light on the
front of the speaker
starts blinking.
After a few seconds,
the speaker goes to
Bluetooth pairing mode
to set up with your
smartphone.
Speaker
front

Enable Bluetooth on your
smartphone or other
device.
Step 4: Pair + connect
If you’ve previously paired your phone or other Bluetooth device
with this speaker, the speaker will automatically attempt to
reconnect to that device when you switch the speaker on. If you
want to pair to a new device, press and hold the
Pair
button on
the side of the speaker until the speaker gives a signal and the
pairing indicator LED starts blinking.
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Settings
8:45PM
Make sure the indicator
light on the front of the
speaker is blinking rapidly.
(If it isn’t, press and hold
the
Pair
button next to this
light until the speaker gives
an audio signal.)
Speaker
front

Bluetooth Wireless connection tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the speaker’s AUX IN
jack when you’re trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly
33 feet (10 meters). This range may vary, however, based on other
factors, such as room layout, wall material, obstacles, your device’s
Bluetooth performance, etc. If you’re having problems connecting
to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
Choose
808 Hex NRG
from the pairing options
on your smartphone. (If it’s not in the list, choose
“Scan” from your phone’s Bluetooth menu.)
The speaker gives an audio signal when
it’s finished pairing and connecting to your
smartphone. The indicator light on the front of
the speaker turns solid blue.
Note:
The process of enabling Bluetooth and connecting varies
from device to device. See your device’s owners manual for
more information and specific instructions.

To adjust the volume of your audio:
Use the
volume controls on your phone.
Set your device’s volume for
music to 75%.
Note:
This is to make sure the sound
from the speaker isn’t too loud when
you start streaming.
Start playing music or
other audio on your device.
Within seconds, the
speaker starts streaming
the audio wirelessly via
Bluetooth.
Step 5: Play music
8:45PM
Now playing
Media volume
8:45PM

Use a 3.5mm audio cable
(not included) to connect
the audio output from
your device to the
Aux
In
audio input on the
speaker’s back panel.
using the aux in input
The speaker automatically switches to the
Aux In
audio, and the pairing indicator on the
front of the speaker turns white.
To listen to Bluetooth audio again, unplug
the cable from the speaker’s
Aux In
jack.
The speaker will try to reconnect to the last
Bluetooth device.
Speaker
back

tour of the speaker
Power
button turns the
speaker on and off.
Pairing indicator
shows
the Bluetooth status of
the speaker:
• fast blinking blue
while pairing
• slow blinking blue while reconnecting
• solid blue when paired
• solid white when the Aux In jack is in use
• off when the speaker’s off.
Pair
button puts the speaker into pairing mode
to connect to a new Bluetooth device, like a
smartphone.
Pairing
indicator

Charging indicator
shows
the charging status of the
speaker:
• solid red while charging
• solid green when
charged
charging
indicator
Charge
jack connects to the provided USB
charging cable to plug the speaker into a power
source or adapter.
Aux In
jack lets you
connect an audio device
directly to the speaker
using a 3.5mm audio
cable.

If you have any questions about this product,
visit 808Audio.com or call our toll-free help line
at 1-800-732-6866.
SP250 QSG 00