Full Text Searchable PDF User Manual

EARA BT-X HEADSET
FOR OPTIMAL AUDIO QUALITY
2play
THANK YOU
for choosing a quality product from 4smarts

facebook.4smarts.com
instagram.4smarts.com
twitter.4smarts.com
youtube.4smarts.com
4smarts GmbH
Postfach 102306
86013 Augsburg, Germany
WEEE-Nr.: DE 14120388


4
1. Kopfhörer
2. Mikrofon
3. Lautstärkeregelung
4. Micro-USB Eingang
5. Multifunktionstaste (Answer, Pause,
Play, On, Off)
6. LED-Statusanzeige
V. Bildbeschreibung
- Das Smartphone muss die in den
technischen Angaben erwähnte Blue-
tooth-Version unterstützen.
IV. Kompatibilität/Voraussetzungen
- Kapazität: 120mAh
- Akku-Typ: Lithium-Polymer
- Gewicht: 25g
- Eingangsleistung: DC 5V/1A
- Anschluss: Micro-USB
- Ladedauer: 1-2h
- Bluetooth Version: 4.1
- Standby-Zeit: ~350h
- Gesprächszeit: ~9h
- Reichweite: 10m
III. Technische Daten
- Headset
- Ladekabel
II. Lieferumfang
- Schließen Sie defekte Geräte wie
beispielsweise USB-Kabel nicht an
dieses Produkt an.
- Lassen Sie das Produkt nicht fallen
und setzen Sie es keinen heftigen
Erschütterungen aus.
- Verwenden Sie nur geeignete Lade-
geräte oder USB-Anschlüsse zum
Aufladen.
- Verwenden Sie defekte Ladegeräte
oder USB-Anschlüsse generell nicht
mehr und versuchen Sie nicht, dese zu
reparieren.
- Überladen oder tiefentladen Sie das
Produkt nicht. Laden & entladen Sie
das Produkt mindestens alle 3 Monate.
- Vermeiden Sie Lagerung, Laden und
Benutzung bei extremen Temperaturen.
- Laden Sie bei längerer Lagerung regel-
mäßig (mind. Vierteljährig) nach.
- Dieses Produkt ist kein Spielzeug, ge-
ben Sie es daher nicht in Kinderhände.
- Im Falle eines undichten Akkus darf die
Flüssigkeit nicht mit der Haut oder den
Augen in Berührung gelangen. Spülen
Sie im Falle einer Berührung mit
reichlich Wasser aus und konsultieren
Sie einen Arzt.
- Lassen Sie das Produkt nur von Fach-
leuten reparieren.
- Hören Sie über längere Zeiträume nicht
mit erhöhter Lautstärke (max. 5 Min.
am Stück/ insgesamt max. 3 Stunden
pro Woche), da sonst Gehörschäden
auftreten können.
I. Sicherheitshinweise
DE

4
5
- Wiederholen Sie dafür oben genannte
Schritte ein weiteres Mal. Aktivieren Sie
das Bluetooth des ersten Gerät nach
dem erneuten Verbindungsaufbau, um
mit beiden gleichzeitig Geräten verbun-
den zu sein (MultiPoint).
- Verbinden Sie die andere Seite des Ka-
bels mit einer geeigneten Stromquelle.
Achten Sie hierbei stets auf die genann-
ten Spannungs- und Leistungsangaben
Ihrer Geräte.
- Warten Sie bis das Produkt vollständig
geladen ist, bevor Sie fortfahren. Tren-
nen Sie nach vollständigem Laden das
Kabel, um den Akku zu schonen.
- Sollte die LED-Statusanzeige (6)
aufleuchten oder blinken, schalten Sie
das Produkt zunächst aus, indem Sie
den An-Ausschalter (5) für 3 Sekunden
gedrückt halten.
- Halten Sie den An-Ausschalter (5) für
3 Sekunden gedrückt, bis die LED (6)
abwechselnd rot und blau aufleuchtet.
- Gehen Sie in die Bluetooth-Einstellun-
gen Ihres Smartphones und suchen Sie
nach: 4smarts BT-X
- Sollten Sie nach dem Verbindungs-
aufbau nach einem Passwort gefragt
werden, wählen Sie „0000“.
- Die LED-Statusanzeige (6) signalisiert
nun durch blaues Aufleuchten den
erfolgreichen Verbindungsaufbau.
- Die Geräte sind nun erfolgreich gekop-
pelt. Der Verbindungsaufbau findet von
nun an stets automatisch statt.
- Deaktivieren Sie die Bluetooth Funktion
am gekoppelten Gerät, um ggf. eine
gleichzeitige Verbindung mit einem
zweiten Gerät aufzubauen.
VI. Inbetriebnahme
-
Lautstärkeregelung:
Tippen Sie kurz + oder - auf der Laut-
stärkeregelung (3) an, um die Lautstär-
ke anzupassen.
-
Vorwärts / Rückwärts:
Halten Sie + oder - auf der Lautstärkere-
gelung (3) gedrückt, um einen Song
nach vorn oder zurück zu springen.
LED
Farbe
Frequenz des
Aufleuchtens
Funktion
Rot
Intervall-Auf-
leuchten 2x
Akku niedrig
Intervall-Auf-
leuchten 3x
Schalte aus
Permanent
Gerät wird
geladen
Blau
Einmal
Gerät verbun-
den
Intervall-Auf-
leuchten 3x
Schalte ein
Permanent
Gerät voll
aufgeladen
Wechsel
Rot/Blau
Wiederholt
Aktiver Verbin-
dungsaufbau
LED-Status & ihre Bedeutung:
VII. Hinweise zur Funktion

6
Verbindungsaufbau funktioniert nicht
- Stellen Sie sicher, dass das Produkt:
• vollständig geladen ist
• sich in Reichweite zum Gerät
befindet
• nicht bereits mit anderen Geräten
verbunden ist (ggf. Bluetooth an
anderen Geräten deaktivieren).
- Stellen Sie sicher, dass Ihr Endgerät:
• kompatibel zu der in den technischen
Angaben angegebenen Bluetooth-
Version ist.
• eine aktive Bluetooth-Verbindung
hat, und sich im Pairing-Modus
befindet.
• keine anderen aktiven Geräteverbin-
dungen besitzt.
V
VIII. Fehlerbeseitigung
-
Schneller Rückruf:
Tippen Sie die Multifunktionstaste (5)
2x kurz an, um die zuletzt gewählte
Nummer anzurufen.
-
Sprachsteuerung aktivieren:
Halten Sie, während Ihr Gerät verbun-
den ist, die + und die - Taste auf der
Lautstärkeregelung (3) 1 Sekunde lang
gedrückt, um die Sprachsteuerungs-
funktion Ihres Geräts zu aktivieren.
-
Headset auf Werkseinstellungen
zurücksetzen:
Halten Sie während des Aufladens die
Multifunktionstaste (5) gedrückt, bis
die LED (6) abwechselnd rot und blau
aufleuchtet.
-
Play/Pause:
Drücken Sie beim Musik hören kurz die
Multifunktionstaste (5) zum Anhalten
bzw. Fortsetzen der Wiedergabe.
-
Anruf annehmen / ablehnen:
Drücken Sie die Multifunktionstaste
(5) kurz zum Annehmen eines Anrufs.
Halten Sie die Taste gedrückt, um
Anrufe abzulehnen. Drücken Sie die
Taste während eines Anrufs erneut, um
aufzulegen.
-
Anruf halten:
Drücken Sie während eines Anrufs 2x
kurz hintereinander die Multifunktions-
taste (5), um einen Anruf zu halten.
Wiederholen Sie diesen Schritt, um
den Anruf wiederaufzunehmen.
-
Stimme zwischen Headset und
Telefon hin- und herschalten:
Halten Sie während eines Anrufs die
Multifunktionstaste (5) 1 Sekunde lang
gedrückt.
-
Umgang mit mehreren Anrufen:
Drücken Sie, wenn während eines An-
rufs ein weiterer Anruf auf Ihrem Gerät
eingeht, die Multifunktionstaste (5) 2x
kurz hintereinander, um den zweiten
Anruf anzunehmen und den ersten
Anruf zu halten. Wiederholen Sie die-
sen Schritt, um zwischen den beiden
Anrufen hin- und herzuwechseln.
Um den ersten Anruf zu beenden und
den zweiten entgegenzunehmen,
drücken Sie die Multifunktionstaste (5)
1x kurz.
DE

6
7
Hiermit erklärt die 4smarts GmbH, dass
sich dieses Produkt in Übereinstimmung
mit den grundlegenden Anforderun-
gen und den übrigen einschlägigen
Bestimmungen der Richtlinie 2014/53/
EU befindet. Die Konformitätserklärung
nach der RED Richtlinie finden Sie unter
www.4smarts.com.
XIII. Konformitätshinweis
Bei defekten Produkten oder Problemen
während der Installation wenden Sie
sich bitte an Ihren Händler oder an die
4smarts Produktberatung auf
http://www.4smarts.com/contact
XI. Service und Support
Elektrische und elektronische
Geräte sowie Batterien dürfen nicht
mit dem Hausmüll entsorgt werden.
Der Verbraucher ist gesetzlich
verpflichtet, elektrische und elektronische
Geräte sowie Batterien am Ende ihrer
Lebensdauer an den dafür eingerichteten,
öffentlichen Sammelstellen oder an die
Verkaufsstelle zurückzugeben.
X. Hinweis zum Umweltschutz
Die 4smarts übernimmt keinerlei Haftung
oder Gewährleistung für Schäden, die
aus unsachgemäßer Installation, Montage
und unsachgemäßem Gebrauch des
Produktes oder einer Nichtbeachtung
der Bedienungsanleitung und/oder der
Sicherheitshinweise resultieren.
IX. Gewährleistung
- Je nach Endgerät und dessen Software
kann die erstmalige Verbindungsauf-
nahme länger dauern. Warten Sie bis
zu einer Minute, oder versuchen Sie es
ggf. erneut in einer Umgebung mit ge-
ringerem bzw. minimalem Funkverkehr.
Die Verständigung ist nicht klar
- Versuchen Sie es erneut in einer wind-
und hallfreien Umgebung.
- Versuchen Sie die Verbindung zu
einem anderen Endgerät.
- Rufen Sie auf einem anderen Telefon
an.
- Versuchen Sie es ggf. erneut in einer
Umgebung mit geringerem bzw mini-
malem Funkverkehr.

8
1. Headphone
2. Microphone
3. Volume Switch
4. Micro-USB input
5. Multifunction key (Answer, Pause,
Play, On, Off)
6. LED Indicator
V. Picture description
The Smartphone must support the Blue-
tooth version mentioned in the technical
specifications.
IV. Compatibility / Requirements
- Capacity: 120mAh
- Battery type: Lithium-Polymer
- Weight: 25g
- Input: DC 5V/1A
- Connector: Micro-USB
- Charging Time: 1-2h
- Bluetooth version: 4.1
- Standby: ~350h
- Talk time: ~9h
- Working Range: 10m
III. Technical specifications
- Headset
- Charging cable
II. Scope of delivery
- Do not drop the product and do not
expose it to any major shocks.
- Only use suitable charging devices or
USB connections for charging.
- Do not charge devices or USB connec-
tions that are defective and do not try to
repair them yourself.
- Do not overcharge the product or allow
the battery to completely discharge.
Discharge & recharge the product at
least every 3 months.
- Avoid storing, charging or using batte-
ries in extreme temperatures.
- When stored over a long period of time,
batteries should be charged regularly (at
least every three months).
- This product is no toy, and should not
be given to children.
- In case of a leaking battery avoid a con-
tact with skin or eyes. If a direct contact
occurs, wash with plenty of water and
consult a doctor.
- This product must only be repaired by
professionals.
- Do not expose your ears to high volume
for a long period of time (max. 5 min.
nonstop/ overall max. 3 hours per
week), to avoid hearing damage.
- Do not connect defective devices such
as USB cables to this product.
I. Safety instructions
EN

8
9
Repeat the above steps on your second
device, and activate the Bluetooth at the
first device at the very end. The product
now connects to both devices at the same
time (MultiPoint).
Connect the plug of the supplied cable
with the related charging connector (4).
Connect the other side of the cable with a
suitable source of energy. Always consider
the mentioned voltage and power informa-
tion on your devices in this step.
Wait until the product is fully charged befo-
re you continue. Disconnect the cable after
the charging, to conserve the battery life.
If the LED indicator light (6) flahses or
lights up, switch off the device by keeping
the On-/Off-Switch (5) pressed for 3
seconds.
Keep the On-Off Switch (5) pressed for 3
seconds, until the LED (6) starts alternate
flashing in red and blue color.
Go to the Bluetooth settings of your Smart-
phone and search for following device:
4smarts BT-X
If you are asked to enter a code after
successfully connecting, you can use the
code „0000“.
The LED indicator light (6) shows the
successful connection by flashing with
only blue light.
The devices are now successfully connec-
ted. From now on, the connection will be
set up automatically.
Deactivate the Bluetooth function on your
connected device if you want to connect a
second device simultaneously.
VI. Operation
-
Volume switch:
Shortly press + or - on the volume
switch (3) to regulate the sound volume.
-
Next/Previous:
Keep + or - pressed on the volume
switch (3) to jump from one song to
another.
LED
colour
Fashing
frequency
Function
Red
Interval
blinking 2x
Battery low
Interval
blinking 3x
Switching off
Permanent
Device is
charging
Blue
Once
Device
connected
Interval
blinking 3x
Switching on
Permanent
Device is
fully charged
Changing
Red/Blue
Repeatedly
Actively
searching for
connection
LED states & their meaning:
VII. Hinweise zur Funktion

10
Setting up the connection doesn‘t work
- Make sure that the product:
• is fully charged
• is inside the working range of the
device
• is not already connected to any
other device (deactivate Bluetooth at
surrounding, other devices).
- Make sure that your terminal device:
• is compatible to the Bluetooth
version, listed in the technical data in
this manual.
• has an active Bluetooth connection,
and is in pairing mode.
• does not have other, active connec-
tions running.
- Depending on the terminal device and
its software, setting up the connection
may take longer.
Wait up to a minute, or try again in
surroundings with less or minimal radio
communication.
XIII. Troubleshooting
-
Play/Pause:
Shortly press the Multifunction key (5)
to pause or continue while listening
to music.
-
Take a call / reject a call:
Press the multifunction key (5) shortly
to take a call. Keep it pressed in order
to reject a call. Press the key during a
call again in order to hang up.
-
Put a call on hold:
Press the multifunction key (5) 2x
shortly in quick succession to put a call
on hold. Repeat this step to resume
the call.
-
Transfer voice between headset
and phone:
Keep the multifunction key (5) pressed
for 1 second during a call.
-
Multiple call handling:
When you receive another call while
you are making a phone call, press the
multifunction key (5) 2x shortly in quick
succession to answer the second call
and put the first call on hold. Repeat
this step to switch between the two
calls.
In order to end the first call and answer
the second one, shortly press the
multifunction key (5) 1x.
-
Fast ringback:
Shortly double press the multifunction
key (5) to redial the latest called
number.
-
Activate voice control:
Keep the + and - button on the volume
switch (3) pressed for 1 second in
order to activate the voice control
function of your device.
-
Factory reset the headset:
Keep the multifunction key (5) pressed
during charging until the LED (6) starts
alternate flashing in red and blue color.
EN

10
11
Hereby, 4smarts GmbH, declares that
this device is in compliance with the
essential requirements and other relevant
provisions of Directive 2014/53/EU. The
declaration of conformity may be consul-
ted at www.4smarts.com.
XIII. Attestation of conformity
If the product is defective or in case
of problems during installation, please
consult your dealer or the 4smarts
product consulting via
http://www.4smarts.com/contact
XII. Service and support
Electric and electronic devices as
well as batteries must not be di-
sposed of with household waste.
Consumers are obliged by law
to return electric and electronic devices
as well as batteries at the end of their
service lives to the public collecting points
set up for this purpose or point of sale.
XI. Disposal notification
The 4smarts GmbH assumes no liability
and provides no warranty for damage
resulting from improper installation or
mounting, improper use of the product
or from failure to ob serve the operating
instructions and/or safety notes.
X. Warranty
The communication is not clear
- Try again in a mostly wind and hall
free surrounding.
- Try to connect the product to a diffe-
rent terminal device.
- Try to call to a different terminal device.
- Try again in surroundings with less or
minimal radio communication.

verM007-01