Full Text Searchable PDF User Manual

WHG713
Secure WLAN Controller

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright Notice
This document is protected by USA copyright laws and other laws. Besides,
the document is the property of 4IPNET, INC. You may not copy, reproduce,
distribute, publish, display, perform, or modify any part of this publication in
any form or by any means without prior written permission from 4IPNET, INC.
You may not alter or remove any copyright or other notice from copies of
the content. All other brand and product names are claimed or registered
marks of their respective companies or organizations.
All rights reserved.
To download up-to-date version, please visit www.4ipnet.com.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
FCC Caution
This equipment has been tested and proven to comply with the limits for a class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
CE Caution
The device has been tested and passed the requirements of the following standards, and
hence fulfills the EMC and safety requirements within the CE marking requirement.
EMC: EN 55032:2012 + AC:2013 Class A, EN 61000-3-2:2014 Class A, EN
61000-3-3:2013 including the followings:
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
Safety: EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
①
Preface
This Quick Installation Guide provides
instructions and reference material for
getting started with the 4ipnet WHG713
Secure WLAN Controller. This guide will
also show how to connect 4ipnet WHG713
to other network equipments.
Package Contents
1. WHG713 x 1
2. Quick Installation Guide (QIG) x 1
3. Console Cable x 1
4. Power Cord x 1
It is highly recommended to use all the
supplies in the package instead of substituting
any components by other suppliers to guarantee
best performance.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
②
System Overview
Front Panel
1.
LCD Display
: Allows network administrator to check important system settings such as network interface,
SZ configurations, etc. The navigation buttons from left to right are
“ESC”, “Up”, “Down”, and “Enter”.
2.
LED Indicators
: There are two kinds of LED,
Power
and
HDD (Hard Disk)
, to indicate the different
status of the system.
3.
Restart
: Press and hold the restart button for about 5 seconds and the system will restart.
4.
Console
: The system can be configured via a RJ-45 console port or a USB Type-C port. The
administrator can use a terminal emulation program such as Microsoft’s Hyper Terminal to login to the
configuration console interface to change admin password or monitor system status, etc.
5.
USB
: Reserved for future use.
6.
RJ45 Ethernet Ports
:
Two 10/100/1000 Base-T WAN ports (WAN1 / WAN2) are connected to the
external network, such as the ADSL Router from your ISP. The other six ports for the LAN connections
(LAN1 / LAN2 / LAN3 / LAN4 / LAN5 / LAN6).
7.
SFP Ports:
Two WAN SFP ports (WAN1 / WAN2) are connected to the external network such as the
ADSL Router from your ISP. The other two ports for the LAN connections (LAN1 / LAN2).
Rear Panel
8.
Device Cooling Fan:
Do not block the cooling fans. Leave enough open space for ventilation.
9.
VGA Connector:
For connection to a Monitor if needed.
10. USB:
Reserved for future use.
11. Power Switch:
For Powering the Device On/Off.
12. Power Supply Socket:
Connecting the power cord to the built-in power supply.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
③
Hardware Installation
Please follow the following steps to install WHG713:
1.
Connect the power cord to the power socket on the rear panel.
2.
Turn on the power switch on the rear panel. The Power LED should be on to indicate a proper connection.
3.
Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet
cable to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on
to indicate a proper connection.
4.
Connect an Ethernet cable to any LAN Port on the front panel. Connect the other end of the Ethernet cable
to an administrator PC for configuring the WHG713 system, an AP for extending wireless coverage, a
switch for connecting more wired clients, or a client PC. The LED of this LAN port should be on to indicate
a proper connection.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
④
Getting Started
< System Concept >
The 4ipnet WHG713 Secure WLAN Controller in Gigabit Ethernet with built-in local accounts, On-Demand
accounts, is an ideal security solution for larger-scale WLAN deployments, including WISP, enterprises,
campuses, hotels, airport terminals, and MDUs/MTUs. The WHG713
integrates “secure access control”, “visitor
account provisioning”, “flexible accounting and billing”, and “centralized WLAN management” into one box to
provide simplified manageability and instant mobility. With more powerful hardware, WHG713 is capable of
centrally managing access points to cover a wider service area in a larger network.
Secure Business Networking
WHG713 is suitable for business in managing their wired and wireless network access uniformly. The network
access of users from different departments and the access of guests can be segregated in different Service
Zones. When needed, WHG713
’s Local, Site-to-Site and Remote VPN tunnels can be used to further secure the
information flows for business. Mobile workers on the road or home-based teleworkers can securely access the
office network through remote VPN tunnels.
【
WHG713 in a Business Headquarter
】

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑤
College Dormitories, Apartments or Hotels Networking
For college dormitories, apa
rtments or hotels who want to cater for their tenants’ Internet access needs, WHG713
makes it easy to manage new tenant registrations and share bandwidth equally among tenants. Also, it is
convenient to set up WHG713 to offer wireless Internet service at large events, such as conventions, trade shows,
and student spring break gatherings.
【
An example of managed network in a Campus environment
】
Telcos or
Wireless ISP (WISP)’s Large Hotspot Deployment
For Telcos or large hotspot operators, WHG713 brings in a convenient and economical way to deploy distributed
hotspot services. While most of the operators prefer to use external RADIUS servers as authentication database,
WHG713 in this architecture can play the role of a central RADIUS-NAS. For quick deployment, WHG713
supports two authentication methods: Web UAM and 802.1X. It is capable of supporting customized web UAM
pages uploaded locally as well as external web UAM pages residing on external web servers. Furthermore, the
concept of Service Zones of WHG713 allows one Controller to manage multiple franchised hotspots
simultaneously.
Hotel with Property Management System (PMS)
For hotels using Property Management System (PMS) such as Micros Fidelio/Opera, WHG713 even enables
Internet access charges to be incorporated into the room bill. Moreover, customers are able to purchase
Internet service in room anytime or at the front counter. With a single account, a hotel guest can log on the
Internet in room through a wired Ethernet port or enjoy wireless access throughout the hotel property. Before
the account expires or the quota purchased reaches its limit, the guest who wants to surf the Internet in his/her
room does not need to retype the password. WHG713 stands for the most cost-effective and easy-to-setup
Internet Access Controller for hotels. Not only can WHG713 manage and bill both wireless and in-room wired
Internet services for properties that have adopted modern IP network infrastructure, but it works for those who
only utilize traditional phone lines coupled with DSLAM and DSL modem equipments to deliver Internet to each
room.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑥
【
WHG713 in a Hotel
– Capable of integrating with DSLAM and PMS
】
In summary, the feature-rich WHG713 supports multiple business models
of Internet Access Services - be it for
managing wireless or wired clients. It can be configured to fit for private corporations, government agencies,
academic campuses, multi-
tenant units (MTU), hotels, WISP or telco’s hotspot operations. The 4ipnet
WHG-series products aim to offer the best price-performance among all access controllers on nowadays
market.
< Web Management Interface >
4ipnet WHG713 supports web-based management interface. Upon the completion of hardware installation,
WHG713 can be configured via web browsers with JavaScript enabled such as Internet Explorer version 9.0
and above or Firefox.
1.
To access the web management interface, connect a PC to one of the LAN ports, and then launch a
browser.
Make sure you have set DHCP in TCP/IP of your PC to get an IP address dynamically.
2.
Next, enter the gateway IP address of WHG713 default Service Zone in the address field. The default
gateway IP address is
“http://192.168.1.254”
(
“https”
is used for a secured connection).
3.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑦
4.
The administrator login page will appear. Enter
“admin”
, the default username, and
“admin”
, the default
password, in the User Name and Password fields. Click
Login
to log in.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑧
5.
After a successful login, the system prompts for the administrator to change password to enforce system
security. The password needs to be at least 6 characters long and include at least one alphabet and one
number.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑨
6.
When the password has been successfully changed, the main welcome page of the administrator
interface will appear.
If you can’t get the login screen, the reasons may be: (1) The PC is set incorrectly so that the PC can’t
obtain the IP address automatically from the LAN port; (2) The IP address and the default gateway are
not under the same network segment. Please use default IP address such as 192.168.1.xx in your
network and then try it again. For the configuration on PC, please refer to WHG User
’s Manual.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑩
Common Settings
< Setup Wizard >
WHG713 provides a
Setup Wizard
for quick
configuration. To quickly configure WHG713 by
using the
Setup Wizard
, click
on the
Setup
Wizard
button on the top right corner to start the
configuration process.
Step 1: General
Time Zone
drop-down list box to set up the
system time.
Click
Next
to continue.
Step 2: WAN1 Interface
Select a proper type of Internet connection for
WAN1 interface from the following three
available connections:
Static
,
Dynamic
, or
PPPoE
. Your ISP or network administrator
can advise on the connection type available to
you. Below depicts an example of
Dynamic
.
Click
Next
to continue.
Step 3: Local User Account (Optional)
New local accounts can be created and added into
the database via this optional function. If local user
accounts are not required, click
Skip
to go directly
to
Step 4
. However, It is recommended to create at
least one local user account in order to verify the
system‘s readiness upon completion of this
Setup
Wizard
.
Enter the
Username
(e.g.
testuser
),
Password
(e.g.
testuser
) to create a new
local account.
Click
Next
to continue.
More local accounts can be added by clicking
the
Back
button in
Step 4
.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑪
Step 4: Confirm and Restart WHG713
Click
Finish
to save current settings and
restart the system.
A confirmation dialog box will then appear.
Click
OK
to continue.
A
Confirm and Restart
message will appear
on the screen during the restarting process.
Please do not interrupt the system until the
Administrator Login Page appears.
Note:
The system is trying to locate a DNS
server at this stage. Therefore, a
longer startup time is required if the
configured DNS cannot be found.
When the following Administrator Login Page
appears, it means the restart process is now
completed.
.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑫
< User Login >
To verify whether the configuration of the new local
user account(s) created via the
Setup Wizard
has
been completed successfully:
1.
Connect a client device (e.g. laptop, PC) to
any LAN Ports. The device will obtain an IP
address automatically via DHCP
2.
Open a web browser on a client device and
access any URL, the default
User Login
Page
will appear.
3.
Enter the Username and Password of a local
user account previously generated via Setup
Wizard (e.g.
“testuser@local”
as the
Username
and
“testuser”
as the
Password
);
then click
Login
.
Note:
1.
WHG713 supports multiple authentication
options including built-in local user database
and external authentication database (e.g.
RADIUS). The system will automatically
identify which authentication option is used
from the full username entered.
2.
The format of a full (valid) username is
userid@postfix
, where
“userid”
is the user
ID and
“postfix”
is the name of the selected
authentication option.
3.
Exception:
The postfix can be omitted only
when the default authentication option is
used. For example,
“LOCAL”
is the default
authentication option at this system;
therefore, you may enter either
“testuser”
or
“testuser@local”
in the
Username
field.
Congratulations!
The Login Success Page will appear after a client
has successfully logged into WHG713 and has
been authenticated by the system.
The appearance of Login Success page means
that WHG713 has been installed and configured
properly.

Quick Installation Guide
WHG713
Secure WLAN Controller
ENGLISH
Copyright ©
4IPNET, INC. All rights reserved.
⑬
< Service Zone & AP Management >
4ipnet WHG713 has introduced an important new
concept called
“Service Zone”
. For how to set up
Service Zones, please refer to the
User’s Manual
.
WHG713 can centrally manage multiple access
points (APs). For how to set up the
“AP
Management”
feature, please refer to the
“AP
Management
”
section of the User
’s Manual.
For further configuration and information,
please refer to the U
ser’s Manual.
P/N: V34320180213