Full Text Searchable PDF User Manual

USER GUIDE
HEART RATE
MONITOR STRAP
for Bluetooth
®
4.0 Smartphones

For more information, video tutorials and support, visit
www.3sixtgear.com/support
Getting familiar with your
3SIXT HEART RATE MONITOR STRAP
4
3
1
a
a
b
2
Sensor (front)
Strap
(inside)
Conductive
pads
Strap
(outside)
Sensor (back)
Battery cover
HEART RATE MONITOR STRAP

For more information, video tutorials and support, visit
www.3sixtgear.com/support
GETTING STARTED
for the first time
1. TURN ON Bluetooth®
1.
Go to Device Settings
•
General
•
Bluetooth
2. Toggle Bluetooth to ON position.
2. WEARING the 3SIXT Heart Rate Monitor Strap
1.
Thoroughly wet both conductive pads on the strap
with water.
2. Snap one end of the Strap to either end of the Sensor.
3. Wrap the other end of
the Strap around your
back and snap the free
end to the free side of
the Sensor, making
sure the logo is facing
up and out. Readjust
underneath chest area
as high as possible.
HEART RATE MONITOR STRAP

For more information, video tutorials and support, visit
www.3sixtgear.com/support
NOTE: Follow steps 1 and 3 everytime thereafter to
measure your heart rate - at the click of a strap!
3. CONNECTING to an App
1.
Download one of the following Apps to your
compatible device from iTunes or Google Play:
RunKeeper, MapMyRUN, MapMyRIDE, Endomondo
(see over for more details).
2. Open the downloaded App on your device and
follow the prompts. DO NOT try to pair through
your device’s Bluetooth settings. You must connect
the 3SIXT Heart Rate Monitor Strap for each App
you use within that particular App. With Bluetooth
4.0 (Smart), you must connect each App separately
though you only ever have to pair once to each App.
4. Train your heart out!
See over for Battery Replacement Instructions

BATTERY REPLACEMENT
Uses
CR2032 3V
type only
Wait approximately 45 seconds after removing the old
battery before installing a new battery to ensure the
electronics fully reset.
1
2
3
4
5
6
7
8
9
Heart rate range
30 to 240 BPM
Power supply
CR2032 3V Lithium
Battery consumption
18 months with typical
usage (1 hr per day)
Data transmission range
3m
Auto power down
3 mins without valid
heart rate signal
SPECIFICATIONS
Moisture resistance level
10m
Soft material
EUROJERSEY
Sensitive®
Washing instructions
Hand wash at 30° C
Chest size
Fits chest size from
66cm to 132cm
Please Note:
From Step 4–7, make sure the black O-Ring stays in place.
In Step 6 take care to install the new battery into the same position as the old battery.

For more information visit
www.3sixtgear.com/support
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. iPod, iPhone, iPad are trademarks of Apple Inc.,
registered in U.S. and other countries.
COMPATIBLE DEVICES
Compatible Third Party Apps are only
compatible with Bluetooth 4.0 (SMART)
Smartphones and Tablets:
iPhone 4S or newer, iPod Touch 5th
generation and newer, Samsung Galaxy
SIII, S4, S5 and newer, iPad 3rd generation and newer, iPad
mini and newer, Samsung Galaxy Note II, 3 and newer and
other selected Android devices with Bluetooth 4.0 (Smart).
THIRD PARTY APPS
1. Search the iTunes App Store or Google
Play Store for Apps like
‘RunKeeper’,
‘MapMyRUN, ‘MapMyRIDE’ or
‘Endomondo’.
2. Pair your 3SIXT Heart Rate Monitor directly with the
App by going into the App’s settings and looking for
‘connect to sensor’ or similar directions.
3. Continue to follow the App’s prompts to complete
syncing with the 3SIXT Heart Rate Monitor Strap.