Full Text Searchable PDF User Manual

Portable Stand Scanner
3R-SSA300
Manual

- 1 -
- Index ―
1.
Contents
2
2.
Name of each parts
2
3.
Installation of Anyty Mini Scan
3
4.
Use Anyty Mini Scan(Setup and launch)
8
5.
Use Anyty Mini Scan(Capture tab, Image scan) 9
6.
Use Anyty Mini Scan(Preview scanned image and Editing
)
12
7.
Use Anyty Mini Scan(Other function) 14
8.
Q&A
15
9.
Caution
15
10.
Spec
16
※The brand names except us which is mentioned in this book, the service names
are registered trademarks of the product companies

- 2 -
1 Contents
Thank you for buying our stand scanner! The package
contains contents below
● 3R-SSA300
● Installation CD
● Manual(This book)
2 Name of each part
Name of each part of 3R-SSA300 is noted below.
(Attention)The USB cable of this product could not be
removed so please DO NOT pull it.
Sensor
Power lamp(inner)
USB cable

-
-
‘
’
‘
’
(
)
‘
’
(
)
①
(
)
(
)

- 4 -
② Auto play will be launched. Please click
‘
Open folder
to view files
’
③
Please click ‘install’ to start installation
(
Attention
)
UAC might be activated if you use Windows
7/Vista. Please press ‘Allow’ or ‘continue’ to start
installation

- 5 -
④Install program will be launched. Please click
‘
Next
’
.
⑤You need to select where to install first. Normally,
press ‘Next’ and continue.

- 6 -
⑥Click
‘
Next
’
in next screen to start installation
⑦ The Window below will be shown as installation is
complete. Please click
‘
Close
’
to finish install program

- 7 -
⑧As installation is complete, please connect Anyty Mini
to your PC with USB port. That is all about set up.
(
Attention
)
If the device could not be identified
properly, please see
‘
Q&A
’
on page 15.

- 8 -
4
Use Anyty Mini Scan(Preparation and launch)
①After completion of installing
‘
Anyty Mini Scan
’
, please
place 3R-SSA300 on somewhere flat and stable. Then put the
object you want to scan as below.
(Attention)Please adjust the position of document after
launch Anyty Mini Scan
② Please launch the software by double click icon on
desktop or launching from
‘
program
’
in
‘
Start
’
Double click icon on the desktop
Click
‘
Anyty Mini Scan
’
in the group of
‘
Anyty Mini Scan
’
.
Scan Document

- 9 -
5
Use Anyty Mini Scan(Scan preview, Image scan)
①The window of which is shown below will be shown when
the Anyty Mini Scan is launched. The image through
sensor will be shown at left side of the window and
capture button. At the right hand side, the capture data
and folders will be shown,
The image under the scanner(Scan preview)
Scan button and Video property Captured data Folders

- 10 -
②The contents of image tab will be change as you move the
scan object. Let
’
s try scanning this time. Please click
scan button.
③As you capture the image, the data will be saved. The
saved data will be shown as thumbnail at right hand side
of the Main window.

- 11 -
④You are able to adjust brightness and the direction by
‘
Preview tool window
’
under the Scan preview
a. Quality adjustment
You are able to adjust exposure, brightness, contrast and sharpness. To adjust exposure manually,
please eliminate the check of
‘
AE
’
b. Direction
Click triangle icons to change direction of scanned data.
c. Resolution
Please click the icon at the lower right side of capture button to adjust resolution during
scanning.
d. Saving quality
You are able to select saving format in
‘
Camera Mode
’
. In addition, click
‘
S
’
button next to
‘
Custom
’
to save your custom setting.

- 12 -
6 Use Anyty Mini Scan(Preview and edition)
① Please double click thumbnail in
‘
Browse
’
to view
captured data
※Switch the tab
Click the name on the tab to switch between scan mode and preview mode.
②The
‘
Picture tool window
’
will be at bottom of the main
window during preview mode. You are able to edit
previewing data with this

- 13 -
a. Clipping of the image
To clip out only a necessary part from preview data, please click scissor icon. Preview data
will go dark so please drag choose the part you want to clip out and double click to create
clipped data.
Scissor icon
Clipping function
Clipping the bright part out
It will be saved as another data,
b. Launch paint software
Click
‘
Photo link
’
to open previewing image with
‘
Paint
’
.
(Attention)Function might not work properly due to your PC environment. In this case, please
open
‘
Paint
’
from
‘
Start
’
.

- 14 -
7. Use Anyty Mini Scan(Other functions)
Other functions are noted in this section
a. Recording movie
To record an animation with Anyty Mini Scan, please click red-round button next to scan button.
It will start recording image under the sensor as movie. To stop recording, please press the
button once again.
(Attention)The saved data of the animation will be AVI file of non-compression. Please pay
attention to HDD space. It needs 800M for 60 seconds
’
recording.
b. Changing saving foldr
The scan data will be saved in the
‘
Anyty Mini Scan
’
folder which is normally made in
‘
My Documents
’
.
Otherwise, please right click in the window of thumbnail and use menu of changing saving folder.
Follow the same step to initialize saving folder.
c. Save as PDF
The scanned data will be saved as JPEG. To save it in PDF format, please click
‘
Save as PDF
’
in
‘
File
’
.

- 15 -
8. Q&A
Q. Install program does not activate.
→Installation program or installation data might be blocked if anti-virus software
is active. Please disable the anti-virus software and try again.
→You might need to grant permission to install the software. In this case, please
take counsel with your system manager.
Q. The Software could be launched but no image.
→Please check if Anyty Mini is connected properly. Power lamp will be lit on during
connection. Also the device name in the
‘
imaging device
’
of device manager will
be shown as below.
→It will be in standby condition automatically if you do not use it for a while.
Please reactivate the window to use it again.
9. Caution
●
DO NOT leave or use the product under direct sunlight and circumstances of high
temperature. Otherwise it would lead to dilation or deformation
●
DO NOT use the product with wet hands or the product in wet conditions. It could lead
to electric shock
●
DO NOT decommission or modify the product. It could lead to electric shock or fire
hazard
●
PLEASE note that using of alcohol or thinner for cleaning is prohibited

- 16 -
10. Spec
Product specification
Anyty Mini Scan Software requirement
OS
Windows 8(32bit/64bit)
Windows 7(32bit/64bit),
Vista(32bit only),XP SP3(32bit only)
CPU
Intel Core 2 Duo 1.6GHz or above
Optical drive
For installation
Memory
1GB or more
HD
20GB or more
Graphic
24bit color or above
Interface
USB2.0
Image sensor
5 million pixel CMOS sensor
Light source
Ambient light
Corresponding color
24bit
Corresponding size
Maximum A4 size
Resolution
Maximum 2592x1944 pixel
Saving format(picture) JPEG、PNG、BMP、TIFF
Saving format(Movie)
AVI
Other functions
Save as PDF
Interface
USB2.0
Power
USB Port
Shape(Unfold)
Approx 43x60x261mm
Weight
Approx 280g