2easy IRIS/DT39 User Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

2-wire Series

IRIS/DT39 USER MANUAL

IRIS VIDEO DOOR PHONE

www.intelligenthomeonline.com

Microphone

Power Indicator

Talk/Mon Button

LCD Screen

Touch Button

Message Indicator

Don’t Disturb Indicator

Unlock Button

Speaker

1 2 3 4 5 6

Mounting Hook

Connection Port

SW+

L1
L2

1 2 3 4 5 6

DIP

1 2 3 4 5 6

DIP

Introduction

The monitor has a 3.9 inch screen with 800 x 480 pixel resolution. Opera-
tion of the monitor functions is via two main buttons “Talk/Monitor” button
on the left, “Unlock” button on the right plus four touch sensitive buttons 1,
2, 3, 4. These buttons are located on the right of the screen

L1,L2:

Bus terminal

SW+,SW-:

Additional doorbell button

connection port

DIP switches:

1-6 used to set moni-

tor User Codes as shown in the video

door station manual tables

-2-

Parts and Functions

Terminal Description

About Main Menu

The main menu is your starting point for
using all features of the monitor. There are
printed numbers “

1,2,3,4

” on the right. To

access the menu touch button 1

145~160

1. Use the screws to fix the mounting bracket on the wall

2. Hang the monitor on the mounting bracket firmly

Monitor Mounting

Basic Operating Instructions

Answering a Call from Door Station

When your visitor presses the

CALL

button on door station, the monitor rings, and the

visitor’s image will appear on the screen. If nobody answers the call, the screen will
shut off automatically after 30 seconds

There are two main buttons on the monitor: “

Talk/Monitor

” button on the left and

“

Unlock

” button on the right

DS-1 00:30

TALK/MON

button allows you to commu-

nicate with the visitor for 90 seconds. To

hang up, press

TALK/MON

button again

-4-

During talking, press

UNLOCK

button to

open the door for the visitor

Intercom Function

Intercom function between rooms is available when

multiple monitors are installed in the system

There are two types of Intercom between monitors.

Each one of them depends on the system settings.

Please, decide before you do the programming

which way you prefer

TYPE1.

Intercom

“Name list”

allows you to call

to a specific monitor in the system. Programming

should be done by DIP switches. First monitor will

have user code 0, second monitor will have code 1

and so on. Open “Name list Call” icon, choose room

you want to call to and press “Dial” button

TYPE 2.

Intercom

“Inner Call”

when you start a

call from one of the monitors, all monitors in the

system will ring. Programming should be done via

menu Master/Slave monitors

Manual Monitoring can be initiated at any

time, even if nobody calls the doorbell

Press

TALK/MON

button

(

or touch

Monitor icon on the main menu to see live

images of outside

When multi door stations are installed, use icon, and then use or

icon to get into the camera switch mode. You can choose Door/Camera

1/2/3/4 to monitor the door station or CCTV camera you want. See the fol-

lowing pictures. Use icon to end monitoring

Name List Call

Inner Call

Call Guard Unit

Ring Tune

Ring Volume

Monitor Time

Exit

Current:

Tune Select

Inc

Dec

Exit

Current:

Adjust Value

Call Guard unit

: A Monitor can be assigned as “Guard Unit Monitor” for Intercom

with receptionist or concierge. “Guard” Monitor won’t be called by Door Station

Call Transfer:

use

Call Transfer

icon to set mobile numbers for call for-

warding if TPS Telephone Interface is installed

Light:

use

Light

icon to operate external light if installed

Playback

: use

Playback

icon to see recorded pictures if extra memory

module is installed

Ring Tone Settings

Use

Setup

icon in main menu, and

then use

Ring Tune

. Different ring tones

for

Intercom

Doorbell

could be

selected from 12 available ring tones.
Use

Inc/Dec

button to select, press

Exit

button to save and exit

DS:

ring tone for Door Station

Intercom:

ring tone for Intercom calls

Door Bell:

ring tone for additional bell

button (if installed)

Ring Volume Settings

Use

Setup

icon in main menu, then

select

Ring Volume icon

. Volume set-

ting range is 0~9. Use

button

to increase / decrease the value, press

Exit

to save and exit

-5-

H/W: a1.2

S/W: 00.01.00

Addr: 00.01

Video STD: AUTO

Language

Restore

Current:

Adjust Value

sec

DS-1 00:30

Monitor Time Settings

Use

Setup icon

in main menu,

then select

”Monitor Time”

option.

Use

button to increase / de-

crease the value, press

Exit

button to

save and return to the previous page

Language Settings

16 languages are supported.

On the main menu page, select

About

Language

. All available languages

will be displayed, and current language

will be shown as ticked “√ ”

Screen Settings

Adjustment of screen settings can be
done in

”Manual Monitoring

Mode”

Use

Adjust

icon to display the

Scene

mode selection

icon:

3 screen modes can be selected:

Normal

Bright

and

Soft

Brightness

icon: to change image

quality setting

Volume

icon:

to adjust Talk volume

-6-

H/W:

S/W:

Addr:

a1.2

00.01.00

00.01

Video STD: AUTO

Language

Restore

InstallerSetup

[

000]

Pressunlocktoexit!

Inc Dec

Confirm

Restore all settings to a Default

In main menu select

About->Restore

Icon

will restore to default all changed settings

Icon

to cancel Restore to default

Note: Restore to default operation won’t affect time and date settings

Installation Setting

How to enter Installation Setup
Step1:

Touch

About

on main menu, then press

and hold for 2 sec UN-

LOCK

button and

Installer Setup

page will opens

Step2:

Input your programming codes according tables on the page 8

Step1

Step2

-7-

Press call button

on door station

Power-saving mode turned off- all monitors rings with video

Master monitor

#1st slave monitor

#2nd slave monitor

#3rd slave monitor

Codes for programming via menu:

[8000]:Master monitor
[8004]:Guard Unit

[8006]:Monitor comes On with video

[8014]:Unlock menu On

[9006]:Simplified version

[8001]~[8003]:Slave monitors 1~3
[8005]:Un-do setting of guard unit

[8007]:Monitor rings with no video

[8015]:Unlock menu Off

[9007]:Full-featured version

How to set the monitor as a Guard Monitor

A Monitor can be assigned as “Guard Unit Monitor” for Intercom with recep-
tionist or concierge. Code 8004 is used to set the monitor as a Guard Monitor
and Code 8005 is used to cancel this function

How to set the slave monitor addresses in Daisy Chain connection

Code 8000 is used to set the master monitor (default)

Code 8001 is used to set the first slave monitor

Code 8002 is used to set the second slave monitor

Code 8003 is used to set the third slave monitor

How to set all monitors to ring with video

By default system designed to work in power saving mode: all monitors ring
but just the master monitor comes on with video. Video will be transferred to
the monitor answered. To turn off power saving mode just input the code 8006
on each slave monitor

-8-

DS-1 00:30

How to enable control of 2 locks

Code 8015 is used to set the unlock menu Off (default) to control one lock only

Code 8014 is used to set the unlock menu On to control two locks

Note:

1. During monitoring or talking, press

UNLOCK

button, two unlock icons will be

shown.

Each one will release the corresponding

lock

2. Note that the restore to default operation

won’t change this parameters settings

How to set the main menu version

There are two main menu versions to choose from: Full-featured version and
Simplified version(default)

Code 9006 is used to set the simplified version main menu (default)

Code 9007 is used to set the full-featured version main menu

Specification:

· Power Supply:
· Power Consumption:

· Monitor Screen:

· Display Resolution:

· Video Signal:

· Wiring:

· Dimensions:

DC 20-28V

Standby 0.286W; Working status 3.224W

3.9 inch digital color TFT

800(R, G, B) x 480 pixels

1Vp-p, 75Ω, CCIR standard

2 wires, non-polarity

138(H)×138(W)×19(D)mm

-9-

Programming of multiple monitors via DIP-switches in Star connection

For programming via DIP-switches, use tables in the door station manual

WARRANTY CARD

-10-

Back cover page as in our Cronus manual, please.

The design and specifications can be changed without notice to the user. Right to

interpret and copyright of this manual are preserved.

website

Ask a Question ?