Full Text Searchable PDF User Manual
Instruction Manual of Slow Masticating Juicer
PRODUCT CONTENTS LIST
DISASSEMBLY, CLEANING AND CARE
All users of this appliance must read these instructions and safety precautions
before operating to avoid personal injury or damage to the appliance.
Hazardous or unsafe operation may result in damage to the appliance or
Don’t operate without locking the hopper properly.
Don’t attempt to juice hard materials such as large seeds (those that can’t
be swallowed or chewed), pits or ice.
Don’t attempt to move the base while in operatin.
Don’t put any parts into the dishwasher or use abrasives to clean. Exposure
to heat or abrasives can cause damage.
If food gets stuck in the feeding tube, don’t use anything other than the
included tool or to push through. If this doesn’t help disasseble and remove.
Don’t use for more than 30 minutes continuously (household use only).
using immediately and contact customer service. It is possible that this
Don’t input anything other than fruits or vegetales as this can cause
Don’t use outdoors.
SAVE THESE INSTRUCTIONS
Don’t place on or near a hot gas or electric burner or in a heated oven.
Do not use appliance for other than intended use.
Always unplug the appliance after use.
Avoid contact with moving parts.
GENERAL DESCRIPTION AND PARTS NAMES
The bigger holes of the strainer produce thicker juice (more
pulp) when soft fruits or vegetables are extracted.
pulp) when hard fruits or vegetables are extracked.
Auto cleaning brush
Auto cleaning brush
Align the three concavitis at the bottom of the basket with the three
raised positions on the base. Afterward, check to ensure that there isn’t
any movement between the two adjoining parts.
Please ensure the silicone gasket set at baskets waste chute is in the
properly closed or the machine won’t operate correctly causing spillage.
The machine won’t work if not
it seat into place.
Place the cleaning brush and strainer in the basket and align the “ ”
until you feel they are securely in place.
Align the “ ” with the “ ” on the basket and rotate the hopper chute
clockwise in the direction of “close” until the opposing triangles meet
just as in the diagram below.
if the hopper doesn’t fasten with the basket correctly, the machine will not
Put the hopper on the basket
Prepare the material and plug-in the machine to the nearest power supply.
Don’t attempt to plug in with
with wet hands.
Please press “forward” to run it.
“FORWARD”: Push the material forward
“REVERSE”: Push the material backwards
Pressing the "reverse" switch while in "forward" operation can cause failure.
while in operation and switching its direction doesn’t help, disassemble and clean.
repeat 2-3 times if machine
Persimmon, mangosteen, mango, peach, apricot, plum,
papaya, and other seeds.
If the machine malfunctions or is damaged due to improper operation, the
warranty will be void and will not be eligible for exchange or replacement.
If any of the below warnings are not followed, the warranty will not be
Hard kernels or seeds
Remove all seeds from fruit.
Pineapple, melon, watermelon, orange, lemon, lychee,
durian, mangosteen and others.
Thick or hard skin
Remove all thick skins.
Frozen raspberry, blueberry, strawberry, mango, mulberry
and anything frozen.
Frozen fruit or ice
Make sure anything introduced into the basket is completely
thawed before using. The use of ice is prohibited
Coconut, kudzu, sugar cane or grains that have not been
soaked (beans, rice, etc.).
These will cause the machine to function improperly and
possibly cause it damage.
Sesame, Soybean, Rapeseed, Edible oil, Animal viscera.
Materials that contain vegetable or animal oil are forbidden
since this will cause damage to the machine’s operation.
DISASSEMBLY CLEANING AND CARE
1. Before disassembly, ensure the motor stops completely. Unplug the power cord.
2. Disassemble by repeating the assembly instructions in reverse;
a. Unlock the hopper by twisting it counter clockwise.
b. Remove the auger by lifting it up.
c. Remove the strainer by lifting it up.
d. Remove the auto cleaning brush by lifting it up.
e. Finally, remove the basket by lifting up.
the debris chute (see diagram on page 10).
4. Disassemble auto cleaning brush (see diagram on page 11)
5. Rinse all parts under warm running water and use the brush when necessary
to remove any debris.
6. Wipe the base with a damp cloth.
When unplugging, be sure to hold the cord by its head.
Never touch the power cord with moist or wet hands.
3. Take off the two removable gaskets and unplug the one gasket from
BASKET DISASSEMBLY AND WASH
Remove the bowl center
not to drop the basket and bowl as it may cause damage.
Remove the bowl center and juice cap inner gasket.
Open the silicon gasket for rinsing with warm
water. Use brush to remove any debris when
Rinse bowl and gaskets under warm running
water. Use brush to remove any debris when
Bowl center gasket
Debris chute gasket
Lift open the juice cap and pull oﬀ the inner gasket.
pinching and twisting it with two ﬁngers. While doing this
SPINNING BRUSH DISASSEMBLY AND WASH
spinning brush frame.
With cleaning brush, clean the inside
and outside of brush frame under warm
If necessary, brush them clean.
Hold the brush frame and gently
and out as in the diagram.
by force and without following the
indicated method, they may be torn
and or the brush frame may be
is in the proper direction for installation.
There are grooves to insert silicone
As shown to the left, ensure that the inner
wing is facing the brush frame.
SPINNING BRUSH ASSEMBLY
Insert the silicone brush into the brush
As in the above diagram, ensure that the
brush frame. Insert the inner wing into the
groove of the brush frame and pull down to
insert into the bottom.
Insert the larger inner wing into the mid
groove of the brush frame and pull up to
insert into the top of the groove as shown
in the diagram to the left.
If auto cleaning brush operates without
proper assembly, there is a risk of damage.
Tail inner wing
Head inner Wing
STERILIZATION AND QUICK CLEANING METHOD
QUICK CLEANING METHOD
For sterilization use baking soda or natural wash-up liquids only
You can thoroughly clean parts by immersing in water diluted with one or
two teaspoons of baking soda or a few drops of natural wash-up liquids for
about 30 minutes.
Enure that both the juice and pulp containers are in
the correct place and after closing the juice cap, pour
the water into feeding tube and turn on.
After a few minutes, open the juice
cap inorder to completely discharge
Whenever changing the ingredients, it’s not necessary to disassemble and
wash. Do so at your own discretion. After juicing, make sure to disassemble
and wash before storage.
Rated Use Time
The method of Juice extraction
Slow Masticating Juicer
Maximum 30 minutes
Slow extrusion/Slow grinding/
What's a Slow Masticating Juicer:
1Easylife Masticating Juicer uses an auger to squeeze out juice instead of shredding
fruits and vegetables with high-speed blades like centrifugal juicers.
Slow, powerful extraction for optimum nutrition with minimal oxidation, preserving
natural taste and nutrients.
Easy to assemble and disassemble without any tools. Clean using only tap water
and the included cleaning brush.
Includes a reversing function to dislodge if the auger gets stuck and helps keep the
juicer running at all times. Quiet design with minimal operating noise. CE, ETL, and
This natural motion minimizes damage to ingredients, helping keep a more natural
taste whilst keeping nutrition intact.
CE, ETL, and RoHS certified
The choice of ingredients is important. They shouldn’t be too hard or too soft.
If they are too hard, damage to the juicer can result. Ginger should be sliced
. Hard apples are good for juicing; soft apples are not.
can be used for making a cake, rice, soup, etc.
for a few seconds to dislodge.
It is recommended to not use the juicer for more than 30 minutes at a time since
Do not introduce any hard material, large seeds, ice or frozen products into the
feed hole of the juice extractor.
30-Day Money-Back Guarantee
You may return your undamaged product and packaging within 30 days
of purchase to receive a FULL REFUND for any reason. If the reason for
return isn’t quality-related, the customer must pay the return shipping costs.
5 YEAR WARRANTY
This product comes with 2-Year warranty for all parts and accessories &
Extended 5-Year warranty for the motor and main body.
Requests for orders shipped internationally
We will take care of all quality-related issues with a FULL REFUND including
any return shipping costs. This includes purchases shipped overseas from
the USA via Amazon.
If you have any comments or question please send us an e-mail. We try to
answer e-mails within 48 business hours.