PDF User Manual

  1. Home
  2. Manuals
  3. 1 BY ONE MD950 Operation Manual

1 BY ONE MD950 Operation Manual

Made by: 1 BY ONE
Type: Operation Guide
Category: Turntable
Pages: 17
Size: 1.10 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

 

 

 

MD950 

Nostalgic Wooden Turntable 

 

 

Operation Guide 

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATION   

 


background image

 

 

 

1. 

Read these instructions.   

2. 

Keep these instructions. Heed all warnings. 

3. 

Follow all instructions. 

4. 

Do not use this apparatus near water.   

5. 

Clean only with dry cloth. 

6. 

Do not block any ventilation openings.   

7. 

Install in accordance with the manufacturer’s instructions. 

8. 

Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 
produce heat. 

9. 

Do not defeat the safety of the polarized of the polarized or 

grounding-type plug. A polarized plug has two blades with one 
wider than the other. A grounding type plug has two blades and a 
third grounding prong. The wide blade or the third prongs are 
provided for your safety. If the provided plug does not fit into your 
outlet, consult an electrician for replacement of the obsolete outlet. 

10. 

Protect the power cord from being walked on or pinched particularly 

at plugs, convenience receptacles, and the point where they exit 
from the apparatus. 

11. 

Only use attachments/accessories specified by the manufacturer. 

12. 

Use only with the cart, stand, tripod, bracket, or table 

specified by the manufacture, or sold with the apparatus. 
When a cart is used, use caution when moving the 
cart/apparatus combination to avoid injury from tip-over. 
Portable Cart Warning 

13. 

Unplug this apparatus during lightning storms or when unused for 

long periods of time. 

14. 

Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way such 
as power-supply cord or plug is damaged, liquid has been spilled or 
objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture does not operate normally, or has been 
dropped. 

15. 

The apparatus shall not be exposed to dripping or splashing and no 

objects filled with liquids, such as vases, shall be placed on the 
apparatus. 

16. 

The battery shall not be exposed to excessive heat such as 

sunshine, fire or the like. 

17. 

The MAINS plugs used as the disconnect device, which shall 

remain readily operable. 

 

 

SAFETY INSTRUCTIONS 

 


background image

 

 

 

 

The exclamation mark inside 
an equilateral triangle is 
intended to alert user of the 
presence of the important 
operating and maintenance 
(servicing) instructions in the 
literature accompanying the 
product. 
 
 
 
 
The lightning flash with 
arrowhead symbol inside an 
equilateral triangle is intended 
to alert User of the presence 
of un-insulated “hazardous 
voltage” within  the product’s 
enclosure, which may be of 
sufficient magnitude to induce 
a risk of electric shock to 
persons

 

 

 

NOTES: 

Please do not attempt to open the back cover or power adapter as opening or 

removing the covers may expose you to dangerous voltage or other hazards, 

and it will also cause the restricted servicing to be disabled: There are no user 

servicing components inside.

 

 

 

NOTES: 

 

The label is located on rear of product. 

  No naked flame sources, such as lighted candles, should be placed on 

the apparatus. 

 

The apparatus is only intended to be used in moderate climates. 

 
 
 
 

WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, 
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE   

 

CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK, DO 

NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE 

PARTS INSIDE. REFER SERVICING TO QUALIFIED 

PERSONNEL    

Class II equipment symbol 
This symbol indicates that 
the unit has a double system. 

CAUTION 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN 

IMPORTANT WARNING 

 


background image

 

 
 
 
 

 

NOTES:  

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates uses and can radiate 
radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

This equipment complies with FCC radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated 
with minimum distance 20cm between the radiator & your body. 

 

 

NOTES:  

This device complies with Part 15 of the FCC rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, 
and (2) this device must accept any interference received, including 
interference that may cause undesired operation. 
 

 

NOTES:  

Changes or modifications to this unit not expressly approved by the party 
responsible for compliance could void the user's authority to operate the 
equipment. 
 
FCC ID: 2ANH7393950 
 
 
 
 
 
 
 

IMPORTANT WARNING 

 


background image

 

 

  Turntable Support 33 1/3,45 , 78 RPM 

 FM / AM Radio 

  CD Player Support CDs and MP3 Disc 

 Cassette Player 

  USB Jack For USB Memory Stick Play Back 

  Recording system from turntable to USB 

  Audio Out ( RCA Jack ) 

  Aux In ( 3.5mm Jack) 

  Phones Out ( 3.5mm Jack) 

 Built-In Amplifier 

  Power Adapter ( Included ) For Main Power Operation 

 

 
 

SAFETY INSTRUCTIONS    . . . . . . . . . . . . . . . . . . . . . . . . . .   

IMPORTANT WARNING        . . . . . . . . . . . . . . . . . . . . . . . . . . 

FEATURES      . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   

CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LOCATION OF THE CONTROLS 1.0    . . . . . . . . . . . . . . . . . 

LOCATION OF THE CONTROLS 1.1    . . . . . . . . . . . . . . . . . 

GETTING STARTED / MAIN OPERATION. . . . . . . . . . . . . . .   

SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LISTENING TO RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LISTENING TO PHONE (Turn Table )    . . . . . . . . . . . . . . . . . 

LISTENING TO CD DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

LISTENING TO CD CASSETTE . . . . . . . . . . . . . . . . . . . . . . .   

LISTENING TO BLUETOOTH    . . . . . . . . . . . . . . . . . . . . . . . 

LISTENING TO USB DEVICE    . . . . . . . . . . . . . . . . . . . . . . . 

LISTENING TO AUX IN ( Line In / Audio In ) . . . . . . . . . . . . 

LISTENING TO AUDIO OUT ( Line Out / Aux Out ) . . . . . . . 

LISTENING TO PHONES JACK . . . . . . . . . . . . . . . . . . . . . .   

USING RECORDING    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   

TROUBLE SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

SPECIFICATIONS    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

10 

10 

11 

12 

12 

12 

13 

14 

15 

CONTENTS 

FEATURES 

 


background image

 

 

 

 

 

 

LOCATION OF THE CONTROLS    1.0 

 


background image

 

 

 

 

1. COVER 

2. 45 

RMP 

ADAPTOR 

3. TURNTABLE 

4. REPEAT 

Button 

5.  PROG. / CLK SET Button 

6. RECORD 

Button 

7. FUNCTION 

Button 

8. POWER   Button 

9. LCD 

Display 

10. VOLUME Knob 

11. USB Jack 

12. DIAL SCALE 

13. CD DOOR  

14. FM Wire Antenna  

15.  AUX OUT ( RCA Jack) 

16.  DC Input Jack   

17. HEAD SHELL 

18. TONE ARM 

 

 

19. SCREW LOCK 

20.  HOLD DOWN CLIP   

21.  TONE ARM CONTROL Lever   

22. SPEED Selector  

23.  AUTO STOP CONTROL   

24. TONE ARM REST 

 

25.  CASSETTE SLOT                             

26. EJECT 

 / 

 Button 

27. SPEAKER 

28. +10 Button 

29. PLAY 

  / PAIR Button   

30. STOP   Button 

31. SKIP 

 Button  

32. TUNING Knob  

33. PHONES Jack  

34. AUX Jack  

35.  CD DOOR OPEN 

 Button 

 

 

 

 

LOCATION OF THE CONTROLS    1.1 

 


background image

 

 

 

 
Main Power Operation 

 

This unit operates using the supplied AC Adapter   

Connecting AC Adaptor 

1.  Plug the AC adaptor into a normal power outlet socket.   

2.  Insert the DC plug of the AC adaptor cord into the 

DC INPUT

 Jack at the 

back of the unit.   

NOTE:  

1)  Only use the supplied adapter.   

2)  Please ensure that your mains supply is compatible before use. 

 

 

 

 

Switching On For The First Time 

Plug into AC power by following instructions on the previous 

Connecting AC 

adaptor

 section. Press the 

 

button

 

to turn on the unit. To turn the unit off, 

press the

   

 

button again.   

 

Switching Between Different Sources   

After turning on the unit, press 

FUNCTION

 button to switch between different 

sound source between CD / USB / BLUETOOTH / PHONE / FM Radio / AM 
Radio / AUX / TAPE 

 

Adjusting Sound Volume Level 

After turning on the unit, turn the 

VOLUME

 knob to adjust the level of sound 

volume.  

 

Power Management Function: 

Unit will automatically go to standby mode after 15 minutes without sound output or 

operation. To resume operation, simply press the

 

  button to turn on unit.

   

 

GETTING STARTED / MAIN OPERATION 

 


background image

 

 

 

1.  Connect power and press the 

  button to power off unit.. 

2.  Press and hold the 

CLK SET

 button until the display digit blink on display.   

3. Press 

the 

 

button to select hour format on 12 / 24 .   

4. Press 

the 

CLK

 

SET

 button to confirm the hour format and the hour digit 

blink on display. 

5. Press 

the 

 

button to increase or decrease hour time.   

6. Press 

the 

CLK

 

SET

 button to confirm hour setting and the minute digit 

blink on display.   

7. Press 

the 

  button to increase or decrease minute time.   

8.  Finally, press the 

CLK

 

SET

 button to storage the actual time setting.   

NOTE:   

 

When the power adapter disconnected or there is a power off. You must 

manual setting the clock again. 

 

When hour format set on 12H, carefully the AM/PM indicator correct or 

not. 

 

 

 
1.  Connect power and press the 

  button to turn on unit. 

2. Set to 

AM or FM 

mode , press 

FUNCTION 

button until 

AM or FM 

indicator show. 

3.  In FM mode, “FM and rAD” indicator show on display. 

4.  In FM mode, “AM and rAD” indicator show on display. 

5. Rotate 

the 

TUNING 

knob to search the desire station. 

6. Rotate 

the 

VOLUME

 knob to select the sound level. 

NOTE:   

 

To have the best AM reception, slightly rotate the unit or move the unit to 

a different area of the room until the best reception is obtained.   

 

To obtain the best FM reception, fully extend the FM wire antenna. Avoid 

close proximity to the speakers and other electrical appliance. 

 

LISTENING TO RADIO 

SETTING THE CLOCK 

 


background image

 

 
 
Gently Open The Dust Cover.   

1. Lift 

the 

COVER

 all the way up until it stop, the cover will now stay open.   

2.  Use screw driver clockwise to unlock the screw lock ( for first time use) . 
3.  Remove tie-wrap from under the 

TONE ARM

. ( for first time use) 

 

4.  Remove white protective needle cover by gently pulling 

towards the front of the unit.   

 

5.  Release tone arm 

HOLD DOWN CLIP

 by gently pushing 

to the right. This will unlock 

TONE ARM

 from its arm rest. 

NOTE:

 

Re-lock the HOLD DOWN CLIP when moving the unit 

to another location.

   

 

Turntable Operation   

1.  Connect power and press the 

  button to turn on unit. 

2. Press 

the 

FUNCTION

 button to select PHONE mode. “PHONE and PHO” 

indicator show on display. 

3. Set 

the 

SPEED

 selector to the correct position (33, 45 or 78rpm).   

4.  Place the record on the turntable.   
5. Lift 

the 

TONE ARM

 

CONTROL

 

lever and move the 

TONE ARM

 to the 

desired starting point over the record.   

6. Lower 

the

 TONE ARM

 

CONTROL

 

lever, the 

TONE ARM

 moves down and 

play start.   

7. Turn 

the 

VOLUME CONTROL 

dial knob to adjust the volume to the 

desired level.   

8. Slide 

the

 AUTO STOP CONTROL

 switch to choose the auto stop 

function.  

9.  At the end of the record, the 

TONE ARM

 will stop automatically. You must 

return the 

TONE ARM

 to 

TONE ARM REST

 manually.   

NOTE: Sound output of the built-in amplifier is limited, when playing records, 
to avoid feedback and rumble. This is normal, so keep the volume as low as 
possible on the unit, and rather increase volume on external amplifier.  
 

 

ADAPTOR for 45 RPM (Accessory)   

This adaptor allows you to play 45 RPM records.   

1.  Gently place your 45 RPM record onto the turntable.   

2. Place 

the 

45 RPM ADAPTOR

 over the spindle. 

3.  Follow the steps under turntable operation to play you record.   

 

LISTENING TO PHONE ( Turn Table ) 

 


background image

10 

 

 
 
Loading a Disc

 

1. Connect power and press the 

  button to turn on unit. 

2. Set to CD mode, press the 

FUNCTION

 button until ”Cd” indicator show on 

display. After 1 sec the “---“ blink on display. 

3. Press the 

 

button

 

to open the 

CD DOOR

4. Place a 

CD

 into the 

CD 

compartment.  

5. Press the 

 

button

 

to close the 

CD DOOR

Playing a Disc 

1. After loading the CD, the CD will be auto play and the track number show 

on display. If necessary, press the 

  button to begin playing the disc.   

2. Rotate the 

VOLUME

 knob to select the sound level. 

3. To temporarily stop playing, press the 

  button once and the display digit 

will blink. To resume play, press the 

  button one more. 

4. Press 

  buttons to skip between next or previous tracks. 

5. Hold the 

 

buttons to fast search through the track. 

6. Press +10 button to search the track by ten. 

NOTE: +10 function for MP3 disc only. 

7. Press the 

 

button to stop playing. 

Repeat Function

 

  During the disc playing.   

 Press the 

REPEAT

 button once and “REP 1” indicator light on display. The 

unit will play the current track repeatedly. 

 Press the 

REPEAT

 button twice and “REP FOLDER” indicator light on 

display. The unit will play the desire folder of disc repeatedly. 

NOTE:

 

Repeat folder function for MP3 disc only. 

 Press the 

REPEAT

 button three time and “REP ALL” indicator light on 

display.. The unit will play the entire disc repeatedly. 

 To cancel the repeat function:    Press the 

REPEAT

 button repeatedly until 

the “REPEAT”

 

indicator light off or press the 

  button twice to stop. 

Programming a Disc up to 20 tracks ( Disc only)

 

1.  When disc playing, press the 

STOP 

button to CD stop mode. 

2. Press the 

PROG.

 button and the “P01” will light on display. 

3. Press the 

 buttons or 

+ 10

 button to select the track from the 

loaded disc you wish to play first. 

4. Press the 

PROG.

 button to confirm. 

5.  Repeat steps 3 and 4 to program to play in a specified order. 

6. Press the 

 

button to start the program playing and the “PROG” 

indicator show on display 

7. Press the 

 

button twice to cancel a program. 

LISTENING TO CD DISC 

 


background image

11 

 

 
 

Loading a Cassette Tape   

1.  Connect power and press the 

 

button to turn on unit . 

2.  Set to cassette mode, press the 

FUNCTION

 until “TAPE and tAP” 

indicator show on display.   

3.  Insert your cassette tape into the 

CASSETTE SLOT.

 The side of cassette 

that your wish to listen to or record onto should be facing towards you. 

Playing a Cassette Tape 

1.  When cassette tape install for a few seconds the unit will be start playing. 
2. Make 

sure 

the 

VOLUME 

knob is not correct position.   

3.  When removing or stop play the cassette tape, press in the

 EJECT 

 / 

 

button fully.   

Skip Track   

When cassette tape playing, press in the 

EJECT 

 / 

 

button half to 

fast forward though the tape. 

 

NOTE: To avoid damage to the cassette mechanism and your tape, always   
press the EJECT button between each operation. 

 

 
 

Connecting Bluetooth to your Smartphone I Tablet 

1.  Connect power and press the 

 

button to turn on unit . 

2.  Set to Bluetooth mode, press the 

FUNCTION

 until “bt ” indicator show on 

display and the “ 

  ” indicator blink on display. .   

1.  On your smartphone / Tablet, turn on Bluetooth and enable device 

scanning. 

2. When 

1byone BS012

 shows on the Bluetooth scan, select it to connect it 

to your device. 

3.  When both devices are successfully connected ( 

 indicator light on), 

you are ready to play    music wirelessly from your device. 

4. Press 

the 

PLAY / 

  button of external Bluetooth device to start music 

playback.  

5. Press 

the 

 

(

NEXT / PREV) 

of external Bluetooth device to 

switch between music tracks. 

NOTE: 

If problems arise, hold the 

  button to reconnect again.   

If necessary to connect other devise, hold the 

  button to reconnect. 

If mobile call coming , the music will stop play until the coming call end.   
 
 

LISTENING TO CASSETTE 

LISTENING TO BLUETOOTH 

 


background image

12 

 

 
 

 

Loading a USB (Support MP3 File) 

1.  Connect power and press the 

 

button to turn on unit . 

2.  Insert the USB device into the 

USB

 jack for a few seconds the unit will be 

start playing. 

3.  Set to USB mode, press the 

FUNCTION

 until ”USB indicator show on 

display and the USB will be auto play and the track number show on 

display. If necessary, press the 

  button to begin playing the USB. 

4. Make 

sure 

the 

VOLUME 

knob is not correct position.   

5. When 

removing 

USB

 device, first press the

 

 

button to stop playing. 

Play / Pause Control 

1.  When USB memory stick connected. Press the 

 

button to play the 

USB. 

2.  Pause playback temporarily by pressing again the 

 button. Music 

playback will be paused and the current elapsed track time will be shown 

and blanking on the display. 

3. Press 

the    button again to resume playback.   

Stop Playback 

To stop playback, press the 

  button to stop playback.   

Skip Track 

During playback, press the 

  buttons to skip to the next or previous 

tracks.  

During playback, press the 

+10

 buttons to search the tracks by ten.   

High-Speed Music Search 

1.  During playback, tuning and hold the 

USB SKIP/SEARCH

 

 buttons 

to skip/search through the current track at high speed in forward or 

backward directions.   

2. When 

the 

USB SKIP/SEARCH

 

 buttons are released, normal 

playback speed will be resumed immediately.   

Repeat Function

 

  During the disc playing.   

 Press the 

REPEAT

 button once and “REP 1” indicator light on display. The 

unit will play the current track repeatedly. 

 Press the 

REPEAT

 button three time and “REP ALL” indicator light on 

display.. The unit will play the entire disc repeatedly. 

 To cancel the repeat function:    Press the 

REPEAT

 button repeatedly until 

the “REPEAT”

 

indicator light off or press the 

  button twice to stop. 

LISTENING TO USB DEVICE 

 


background image

13 

 

 

 

This will allow you to broadcast the external unit’s sound through your

 

unit. 

CONNECTION: 

1.  Plug a 3.5mm audio cable into your MP3 or MP4 player Aux out / Line 

–out / Audio out or phones port. 

2.  Plug the other end to

 AUX IN

 jack on the top of your unit. 

3.  Make sure both units are turned on. 

4.  Set to AUX mode, press the 

FUNCTION

 button until “AUX and AU” 

indicator show on display. 

5.  Set your device to start playing. 

6.  This will allow you to broadcast the external device sound through your 

unit. 

 

 

 

1.  You can run the audio from the unit into your home stereo, television or 

other stereo source by using the 

AUDIO OUT 

RCA Jack.   

2.  To make this connection, you need a standard RCA cable. Plug the red 

and white connectors on one end of the cable into the red and white 

AUDIO OUT 

RCA Jack on the rear of the unit. The other end of the cable 

will plug into the 

AUX INPUT

 jacks ( 

LINE INPUT / AUDIO INPUT

 ) of 

your selected device.   

3.  Operate the unit as usual, you can hear the sound produced by the unit.   

NOTE: You can still listen to your unit when using the Audio Output feature. 

 

 

Turn the unit volume to minimum before connecting your headphone or 

earphone to headphone jack. Headphones / earphone should have a 3.5mm 

diameter stereo plug and an impedance of 8 – 32 ohms. When headphones 

are connected, the speakers sound are automatically get disconnected. 

NOTE: Extended listening of music at high volume may damage your hearing. 

It is highly recommended to use at comfortable volume levels. 

 

LISTENING TO AUDIO OUT

 

( Line Out / Audio Out )

 

LISTENING TO AUX IN 

( Line In / Audio In )

 

LISTENING TO PHONES JACK

 

 


background image

14 

 

 

 
 

This unit can record the unit music sound to USB from CD disc / Turn table / 

Cassette / Aux in. 

1.  Connect power and press the 

 

button to turn on unit . 

2. Insert 

the 

USB

 device into the 

USB

 jack.   

3. Press 

the 

FUNCTION

 to

 

select desire mode that you want to recording.   

 

If recording from CD : Place the CD disc on CD compartment. Press 

  button to start play and press 

 

or

 +10 

button to search 

special track. 

  If recording from turn table : Place the record turn table disc and 

move the 

TONE ARM

 to the desired starting point over the record. 

  If recoding from cassette : Place cassette tape into 

CASSETTE 

SLOT.

 

 

If recoding from Aux in : Connect external device to 

AUX IN

 jack. Set 

your device to start playing. 

4.  After above setting, press the 

RECORD

 button to start recording and the 

“ rEO” show on display. 

5.  To stop recording, press the 

RECORD

 button one.   

6.  Recall the recording file: Press the 

FUNCTION

 to

 

return to 

USB

 mode 

and press 

 button to playback and press 

 

to search 

previous / next track. 

NOTES:

   

Don’t forget for you must return the TONE ARM to TONE ARM REST 

manually after recording. 

Make sure the USB enough memory for all recording   

Bluetooth / AM Radio / FM Radio and Aux cannot recording. 

 

 

 

 

 

 

 

USING RECORDING 

 


background image

15 

 

 

If you have followed the instructions and are having difficulty operating the unit, 
locate the PROBLEM in the left column below. Check the corresponding POSSIBLE 
CAUSE AND SOLUTION column to locate and fix the problem. 

 

 

PROBLEM 

POSSIBLE CAUSE AND SOLUTION 

No power 

 

  Ensure that the unit is powered ON 

  Check the master volume not turn to minimum 

  Remove the power adapter / connection cable and reconnect 

again after 2 minutes. 

 

No sound on 
phone source 

 

  Ensure that the unit on correct source. 

  The protective needle cover was not removed. Remove it. 

  The tie-wrap was not removed from underneath tone arm. 

Remove it first. 

 Unlock the 

SCREW LOCK

 by screw driver. 

 Tone arm 

HOLD DOWN CLIP

 was not released. Release it.   

 

Poor sound on 
phone source 

 The stylus is dirty. Remove dust on the stylus with a 

stylus-cleaning brush   

  Dust or dirt has collected on the record. Clean the record with 

a good-quality record cleaner. 

 

No sound on 
USB source 

  Ensure that the unit on correct source. 

  Ensure that the USB file is MP3 format.   

  Remove the USB memory stick and reconnect again. 

 

No / poor sound 
on radio source 

  Ensure that the unit on correct source. 

  Radio signal too weak. Remove the unit to other place or 

extend the wire antenna. 

No / poor sound 
on CD source 

  Ensure that the unit on correct source. 

  Make sure the disc printing face up. 

  Make sure the disc is CDs or MP3 format. 

  The disc dirty, cleaning the disc and play again. 

No / poor sound 
on cassette 

  Ensure that the unit on correct source. 

  Remove the cassette tape and use other face to play again. 

  Cassette tape broken, change other new one. 

No sound on 
Aux mode. 

  Ensure that the unit on correct source. 

  Check the both unit turn on power   

  Check the volume level on external device 

  Check correct source on external device 

  Remove the audio cable and reconnect again. 

Not recording 

  Ensure that the unit on correct source. 

  Ensure that the USB connect correctly. 

  USB Memory not enough , change new one   

  Remove the USB memory stick and reconnect again. 

TROUBLE SHOOTING 

 


background image

16 

 

 

     

 

 
Specifications are typical, individual units might vary. They are subject to continuous 
improvement without notice and without incurring any obligation. 

 

AC Power Adapter 

AC Input :AC~ 100-240V 50/60Hz 
DC Output = 

10.0V , 1500mA

 

Turn Table Speed 

33 1/3, 45 , 78 RPM 

USB 

Support MP3 format 

CD Player 

Support CDs and MP3 Disc 

Radio  

FM:  88-108 MHz  ,AM:  525-1650KHz 

Power Output At Turn Table 

2W X2 

RMS Power Output 

Power Output At   
USB / Radio / Cassette / CD / AUX   

5W X2 

RMS Power Output

 

SPECIFICATION